Timedepent Flatfile Hierachie in BW3.5
hi all,
i have a problem with my timedepent hierachie, when i try to load them via flatfile to the BW (BW3.5). the whole hierachie is timedepent and i have the chance to select a time range in the datasource-view in the created infosource. if i select the time-interval manuel, there are no problems.
BUT, i would automize this process!
How could I customize my load-process, that the system automaticly change the validy of my hierachie? for example, the DATEFROM should be the actual date and DATETO = 31.12.9999 (the selection in the datasourceview ist 01.01.1000 - 31.12.9999)
I think i must create a formula or routine in my infosource-mapping!??
thx for help!
br
david
Hi David,
As I understand you can do this in the Start routine by using the P tables and add this Datefrom field in to that. You can use this by giving the start date as systemdate and assign this in Routine.
Other way to do this in the Transformation write a routine and do this. Your hierarchy is nothing but stored in the Table format. So you can do this in either Transformation or in Routine.
If you give more elaboration of your issue, I shall tell you what suits better in your case.
Regards,
Mahesh
Sorry due to system hang up its posted couple of time Edited by: Mahesh Jethwani on Dec 15, 2008 8:12 PM
Similar Messages
-
Creation of DataSource for FlatFile Interface in BI 7
Hi Y'all!
Can anyone please give me urgent assistance in creating/defining a DataSource for the FlatFile Scenario in BI 7.0. I've been trying to no avail. I certain I am doing this incorrectly, as such I seek your assistance. Can anyone please be so kind as to give me a step-by-step walkthrough of the specific individual steps (in sequence) in creating/defining DataSources... Also can this be accepted as a character (08-MAY-07)?
Much thanks!
PhilipsHi,
The following step can help you..
1. create a info source and assign the data source -
2. select data source as PC File ( give any name tech & desc)
3. create a info source structure by include all individual info objects / har. keyfig
those are available in your file
4. you can always take the reference of the info objects from the cube/ODS as to
make info source staructure easy
5. map the corresponding info objects in the trasfer structure
6. save and activate the info source
7. go to your info provider cube/ODS and right click - select - create update rules
select the name of the file data source name as given above
8. map them as defult one-to-one mapping until other wise you have some require
ment in data manipulation through update rules.
9. save and activate.
10. come to the info source - create a info package - select source as .CSV file
and preview it before you actually load.
11. as far as date is concern in your falt file..select the entire column of the date
then goto-format column-select 'customize' then put format as 000000 (six
zeros ) for 0calmonth.
12. when you lookat the date at infoprovider it shows like 20070508 but
when you execute in a query it displays its text as 08-May-2007
I hope it would help you to understand and get your purpose solve.
Thanks=points.
Cheers. -
Data extraction from sap r/3 to flatfile
hello Guru's
i am new to this feild. i got a requirement in such a way i have to extract data from feilds of different tables to flatfile.
( actual Scenario is we want to send data to sybase server through flatfile)
plz send me some documents how to proceed with the specification
usefull code in this regard is lot helpfull.
thanks and regards
ajHello Raja,
Here are some simple steps ...
When you want to load data from a flat file, there is no process of datasource replication. The datasource has to be created manually on the BW system itself. When creating this datasource you start from the InfoSource and assign the source system for flat file load. This is usually something like PC_FILE or FLATFILE.
Then you can start creating the datasource. You need to mention the field names in this datasource. Note that in your flat file, the sequence of fields must exactly match the sequence of fields in the datasource, else the data will be wrongly mapped.
On the same screen and tab you can also do a preview of the data that will be loaded. Click the preview button and put in the path of the file. Mention other details like header row, and number of rows to be displayed and then you will be able to judge if the data is being loaded correctly or not.
When loading the data, then file cannot be open else you will get an error message. Also to be able to schedule the flat file loads in process chains, the file cannot be on your PC. It has to be on the application server.
This is some basic info. Please post back if you need details on any aspect.
Hope this helps...
Assigning points is the way to thanks in sdn. -
<Moderator Message: Please read the rules of engagement. You should not post multiple questions to one thread, also use meaningful subjects. And don't offer points.>
HELLO Guys
I have some doubts regarding SAP BW3.5...cAN anyone please clarify.
1.this is regarding SID Concept.
iIn extended start schema,there will be one fact table connected to many dimendion tables.Fact table and Dim tables are connected by dimension IDs.then this Dim table will hold various characteristics.every characteristic will store the characteristic value and address(pointer) to SID table.This SID table will hold again addresses(pointers) to attributes,text and hierarchy tables(if we assume that characteristic have attribute,text,hierarchy) which in turn contain the values.When a query is executed,the OLAP processor searches first for characteristics in dim tables and then with help of dim IDs traces Transaction Data in Fact table relevant for this combination of characteristics and gives output.Did I understand the concept right?
how does OLAP Processor run if the query is on just text of a characteristic and it doesnot include this characteristic?
2.how does navigational attr decrease the performance?
3.cAN YOU ASSIGN
a. many datasources to one infosource
b.one datasource to many infosources
c.many datasources to many infosources...
can you please give real time scenarios for this....
4.how do SID concept improve BW/BI.
thanks
Surekha Chand
Edited by: SChandx200 on Jul 2, 2009 7:35 AM
Edited by: SChandx200 on Jul 2, 2009 7:37 AM
Edited by: Siegfried Szameitat on Jul 2, 2009 1:09 PMHi,
You understanding is correct.
{code)
how does OLAP Processor run if the query is on just text of a characteristic and it doesnot include this characteristic?
{code}
This question of yours is not very clear. Re phrase and post it again.
2.how does navigational attr decrease the performance?
Ans:- Say for example in the customer master table customer phone no is the navigational attribute. Now when you select this navigation attriubte in your report then the processor will go and first check the value of Customer say C1 and then determine C1 phone number. Now this look up of cusotmer will happen for every customer . So if say there are huge number of records for which this look up of customer first has to happen then obviously the performance will be impacted.
Hope it is clear. -
Uploading HierarchyData from a flatfile in 2.0B
Hi All,
Can Anyone help me on "How to Upload HierarchyData from a flatfile in 2.0B".
I want to upload three levels data .
Orgunit>Position>Person . I am confused, how should
i maintained columns order in flatfile and in BW side.
Pls clarify this.
Is it possible from r/3 to BW, i.e 0ORGUNIT_HR01_HIER data source Having only one level(0orgunit). I need other levels also.
Please help me ..
Regards,
Srilaxmi.Hi Laxmi,
The file will have a column for InfoObject. I'll mail you the document that I have but the best way to proceed is to first draw the entire hierarchy including all the levels for e.g.
0ORGUNIT 10010001 (1)
00RGUNIT 10010002 (2) 10010003 (7)
/ \ |
0HRPOSITION 40010001 (3) 40010002(5) 40010003 (8)
0PERSON 80010001 (4) 80010002(6) 80010004 (9)
Then you can read it from top to bottom and then left to right for e.g.
Then you can read it from top to bottom and then left to right for e.g.
Node InfoObject Level Parent Next Child
1 0ORGUNIT 1 2
2 0ORGUNIT 2 1 7 3
3 0HRPOSITION 3 2 5 4
4 0PERSON 4 3
5 0HRPOSITION 3 2 6
6 0PERSON 4 5
7 0ORGUNIT 2 1 8
8 0HRPOSITION 3 7 9
9 0PERSON 4 8
The column that I've left out is the value column. For e.g. the actual org unit value 10010001. Parent, next and child all refer to node id's.
With regards to having more than one level on the org unit hierarchy on R/3. This is definately possible - you can many, many levels on R/3. Normally a BW person won't change the main version of the hierarchy for his needs, the structure of the hierachy is determined by the business structure.
I've also mailed through the documentation for the help.
Hope this is helping you.
Kind regard,
Dorothy -
VC using BW3.0 via XMLA and Multicube
Hi,
i have connected a BW3.0 to Visual Composer (7.0) by using xmla connector. The connection works fine and i can create a query in BI integration wizard. But i get an error message when i want to use a multiprovider:"Error - 11021 Cannot create the OLAP data service. Cannot add OLAP data service to iview" Does VC support multicubes on BW3.0? If, yes, do you know this error message?
Best regards
Danielthe multicubes are supported by xmla. several reasons can cause this error:
connection timed out because server compiling or large resultset;
mandatory variable defined;
use transaction mdxtest to run a sample mdx against this multicube. if successful, run the same mdx with VC MDX Editor. that should give you an idea where could be wrong. -
Error while creating more than 100 users using Flatfile Recon
Hi,
I am trying to create users in OIM 9.1 using flat file recon. The recon works when I have less than 100 users in the flatfile. But if I add more than 100 users to the file, the recon does not create all users. Less than 50 users get created in OIM if the number of users in the flat file is more than 100. I get the below error in this scenario.
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: tcDefaultSignatureImpl/verifySignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connectSignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,600 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connect encounter some problems:
com.thortech.xl.security.tcLoginException:
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.Authenticate.connectSignature(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.jboss.UsernamePasswordLoginModule.login(Unknown Source)
at sun.reflect.GeneratedMethodAccessor130.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
Is there any maximum limit to the number of users created in Flatfile recon? I also get lot many errors following the above error. Please suggest
Edited by: User_OIM on Nov 26, 2012 9:37 PMHi Rajiv,
I am using GTC for the recon. Below is the complete log
com.thortech.xl.ejb.databeansimpl.tcDataBaseBean.ejbCreate() throws javax.ejb.CreateException
2012-11-28 23:08:22,052 DEBUG [org.jboss.proxy.ejb.ProxyFactory] seting invoker proxy binding for stateful session:
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: tcDefaultSignatureImpl/verifySignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,599 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connectSignature encounter some problems: object not initialized for verification
2012-11-28 23:08:27,600 ERROR [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: Authenticate/connect encounter some problems:
com.thortech.xl.security.tcLoginException:
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.Authenticate.connectSignature(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.jboss.UsernamePasswordLoginModule.login(Unknown Source)
at sun.reflect.GeneratedMethodAccessor130.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
at javax.security.auth.login.LoginContext$4.run(LoginContext.java:683)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at org.jboss.security.plugins.JaasSecurityManager.defaultLogin(JaasSecurityManager.java:603)
at org.jboss.security.plugins.JaasSecurityManager.authenticate(JaasSecurityManager.java:537)
at org.jboss.security.plugins.JaasSecurityManager.isValid(JaasSecurityManager.java:344)
at org.jboss.ejb.plugins.SecurityInterceptor.checkSecurityAssociation(SecurityInterceptor.java:211)
at org.jboss.ejb.plugins.SecurityInterceptor.invokeHome(SecurityInterceptor.java:135)
at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:132)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invokeHome(ProxyFactoryFinderInterceptor.java:107)
at org.jboss.ejb.SessionContainer.internalInvokeHome(SessionContainer.java:637)
at org.jboss.ejb.Container.invoke(Container.java:981)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invokeHome(BaseLocalProxyFactory.java:359)
at org.jboss.ejb.plugins.local.LocalHomeProxy.invoke(LocalHomeProxy.java:133)
at $Proxy278.create(Unknown Source)
at sun.reflect.GeneratedMethodAccessor166.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.tcBaseUtilityClient.getLocalInterface(Unknown Source)
at Thor.API.Operations.tcReconciliationOperationsClient.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy368.getDefaultDateFormat(Unknown Source)
at Thor.API.Operations.GCOperationsClient.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor163.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy798.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2012-11-28 23:08:27,602 ERROR [XELLERATE.APIS] Class/Method: tcBaseUtilityClient/getLocalInterface encounter some problems: {1}
java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor166.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.tcBaseUtilityClient.getLocalInterface(Unknown Source)
at Thor.API.Operations.tcReconciliationOperationsClient.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:659)
at org.jboss.invocation.local.LocalInvoker$MBeanServerAction.invoke(LocalInvoker.java:169)
at org.jboss.invocation.local.LocalInvoker.invoke(LocalInvoker.java:118)
at org.jboss.invocation.InvokerInterceptor.invokeLocal(InvokerInterceptor.java:209)
at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:195)
at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:61)
at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy368.getDefaultDateFormat(Unknown Source)
at Thor.API.Operations.GCOperationsClient.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor163.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at Thor.API.Base.SecurityInvocationHandler$1.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at Thor.API.Base.SecurityInvocationHandler.invoke(Unknown Source)
at $Proxy798.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.gc.runtime.GCScheduleTask.execute(Unknown Source)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by: javax.ejb.AccessLocalException: SecurityException
at org.jboss.ejb.plugins.LogInterceptor.handleException(LogInterceptor.java:384)
at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:136)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invokeHome(ProxyFactoryFinderInterceptor.java:107)
at org.jboss.ejb.SessionContainer.internalInvokeHome(SessionContainer.java:637)
at org.jboss.ejb.Container.invoke(Container.java:981)
at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invokeHome(BaseLocalProxyFactory.java:359)
at org.jboss.ejb.plugins.local.LocalHomeProxy.invoke(LocalHomeProxy.java:133)
at $Proxy278.create(Unknown Source)
... 55 more
Caused by: com.thortech.xl.security.tcLoginException:
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.tcLoginExceptionUtil.createException(Unknown Source)
at com.thortech.xl.security.Authenticate.connectSignature(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.Authenticate.connect(Unknown Source)
at com.thortech.xl.security.jboss.UsernamePasswordLoginModule.login(Unknown Source)
at sun.reflect.GeneratedMethodAccessor130.invoke(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.login.LoginContext.invokePriv(LoginContext.java:680)
at javax.security.auth.login.LoginContext.login(LoginContext.java:579)
at org.jboss.security.plugins.JaasSecurityManager.defaultLogin(JaasSecurityManager.java:603)
at org.jboss.security.plugins.JaasSecurityManager.authenticate(JaasSecurityManager.java:537)
at org.jboss.security.plugins.JaasSecurityManager.isValid(JaasSecurityManager.java:344)
at org.jboss.ejb.plugins.SecurityInterceptor.checkSecurityAssociation(SecurityInterceptor.java:211)
at org.jboss.ejb.plugins.SecurityInterceptor.invokeHome(SecurityInterceptor.java:135)
at org.jboss.ejb.plugins.LogInterceptor.invokeHome(LogInterceptor.java:132)
... 61 more
2012-11-28 23:08:27,605 ERROR [XELLERATE.GC.FRAMEWORKRECONCILIATION] Reconciliation Encountered error:
Thor.API.Exceptions.tcAPIException: Unable to retrieve default date format
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
ceptor.invoke(SecurityInterceptor.java:70)
at org.jboss.proxy.ejb.StatelessSessionInterceptor.invoke(StatelessSessionInterceptor.java:112)
at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:100)
at $Proxy368.getDefaultDateFormat(Unknown Source)
at Thor.API.Operations.GCOperationsClient.getDefaultDateFormat(Unknown Source)
Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
Caused by [Nested Exception]:
Thor.API.Exceptions.tcAPIException
at Thor.API.Base.tcBaseUtilityClient.getLocalInterface(Unknown Source)
at Thor.API.Operations.tcReconciliationOperationsClient.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beansimpl.GCOperationsBean.getDefaultDateFormat(Unknown Source)
at com.thortech.xl.ejb.beans.GCOperationsSession.getDefaultDateFormat(Unknown Source)
at sun.reflect.GeneratedMethodAccessor164.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.invocation.Invocation.performCall(Invocation.java:359)
at org.jboss.ejb.StatelessSessionContainer$ContainerInterceptor.invoke(StatelessSessionContainer.java:237)
at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke(CachedConnectionInterceptor.java:158)
at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke(StatelessSessionInstanceInterceptor.java:169)
at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)
at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)
at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:350)
at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor.java:138)
at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
at org.jboss.ejb.Container.invoke(Container.java:960)
at sun.reflect.GeneratedMethodAccessor134.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.jboss.mx.interceptor.ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
at org.jboss.mx.server.Invocation.dispatch(Invocation.java:94)
at org.jboss.mx.server.Invocation.invoke(Invocation.java:86)
at org.jboss.mx.server.AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
2012-11-28 23:08:27,607 WARN [XELLERATE.GC.FRAMEWORKRECONCILIATION] Though Reconciliation Scheduled task has encountered an error, Reconciliation Transport providers have been "ended" smoothly. Any provider operation that occurs during that "end" or "clean-up" phase would have been executed e.g. Data archival. In case you want that data to be a part of next Reconciliation execution, restore it from Staging. Provider logs must be containing details about storage entities that would have been archived
2012-11-28 23:08:27,704 ERROR [XELLERATE.SERVER] Class/Method: QuartzWrapper/execute encounter some problems: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
org.quartz.JobExecutionException: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
[See nested exception: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.updateStatusToError(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.access$600(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
2012-11-28 23:08:27,704 INFO [org.quartz.core.JobRunShell] Job DEFAULT.FLAT RECON_GTC threw a JobExecutionException:
org.quartz.JobExecutionException: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
[See nested exception: java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: ORA-01461: can bind a LONG value only for insert into a LONG column
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:947)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3462)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1349)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.updateStatusToError(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.access$600(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at Thor.API.Security.LoginHandler.jbossLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:203)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520) -
Value set to make BEx variable faster (BW3.5)
edit> No one knows?! I really didn't think this will be difficult, come one... easy points for this one!
Good day all,
This must be a simple problem, but I cant find any instruction on the web how to do this.
Ive got a BEx query on BW3.5 that has a variable as input, but when you click on the dropdown box, it takes extremely long to bring back a set of values.
Ive been told the way to get pass this problem is to define a pre-calculated value set in Reporting Agent.
I have done this, but cant get the query to use it.
What are the steps? It should be simple
Ive chosen the following options (which is not working)
Processing by: User entry / Default Value
Variable represents: Precalculated value set*
Variable entry is: Optional
Valueset: Z_MY_VALUE_SET
I dont think this is right, because this implies that the query automatically uses the value set as filter, instead of the users input.
What is happening, is that when the variable dialog opens up, it shows Z_MY_VALUE_SET as default value and when I open the dropdown it still takes long to retrieve the values.
Thanks in advance
Rudolph
Message was edited by:
Rudolph Bothaplz go through this link below:
http://help.sap.com/saphelp_nw04s/helpdata/en/84/00783b3af21f5ee10000000a11402f/frameset.htm -
Problem while adding a new dimension in a existing cube with data in BW3.5
Hi,
We are trying to create a new dimension with new characteristics in a existing cube. But while activating we are getting error that "InfoCube contains data; intentional changes not permitted". Can we add a new dimension in a existing cube with data in BW3.5? If it is not possible then we can take the backup and delete the data from cube and then change the cube. But my question is that, when we will transport the cube with changes to quality then will it transport successfully or same procedure needs to be done there as well.
Regards,
Saikathi,
Adding new infoobject /dimension to the cube containing data in 3.5 is not possible.
easier solution is create a new cube similar to old and add the new dimension and proceed.
else you have to drop data and transport.
Ramesh -
Loading data from flatfile to relational table,i am getting SQLLDR error
Hi,
While loading data from flatfile to relational table,i am getting SQLLDR error and i am unable to proceed further.
Source is a flatfile and target is a Oracle database,i used "LKM file to oracle(SQLLDR)" and "IKM sql control append"
and ran the interface.When i checked the seesion in operator window" after generating "CTL file" successfully
the session got failed at "Call sqlldr" and was not able to proceed further.
Environment details:
ODI 11g
database:Oracle 11g
Operating system:Windows server 2008
The error message it displayed in call sqlldr session file was
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 31, in ?
File "C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\client\odi\bin\..\..\jdev\extensions\oracle.odi.navigator\scripting\Lib\javaos.py", line 198, in system
File "C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\client\odi\bin\..\..\jdev\extensions\oracle.odi.navigator\scripting\Lib\javaos.py", line 224, in execute
OSError: (0, 'Failed to execute command ([\'sh\', \'-c\', \'sqlldr DEVELOPER/pass_123@CPRDEV control="F:\\\\flatfile/CROSS_CURR.ctl" log="F:\\\\flatfile/CROSS_CURR.log" > "F:\\\\flatfile/CROSS_CURR.out" \']): java.io.IOException: Cannot run program "sh": CreateProcess error=2, The system cannot find the file specified')
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:345)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:169)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2374)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1615)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java:1580)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2755)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:619)
could u give me a solution to sort out this error ASAP.
thanks,
keshav.This was the following code generated .
import java.lang.String
import java.lang.Runtime as Runtime
from jarray import array
import java.io.File
import os
import re
import javaos
def reportnbrows():
f = open(r"F:\flatfile/TEST.log", 'r')
try:
for line in f.readlines():
if line.find("MAXIMUM ERROR COUNT EXCEEDED")>=0 :
raise line
finally:
f.close()
ctlfile = r"""F:\flatfile/TEST.ctl"""
logfile = r"""F:\flatfile/TEST.log"""
outfile = r"""F:\flatfile/TEST.out"""
oracle_sid=''
if len('CPRDEV')>0: oracle_sid = '@'+'CPRDEV'
loadcmd = r"""sqlldr DEVELOPER/<@=snpRef.getInfo("DEST_PASS") @>%s control="%s" log="%s" > "%s" """ % (oracle_sid,ctlfile, logfile, outfile)
rc = os.system(loadcmd)
if rc <> 0 and rc <> 2:
raise "Load Error", "See %s for details" % logfile
if rc==2:
reportnbrows() -
Unable to configure Flatfile Reconciliation in OIM 9.1.0.1
Hello,
I am facing this weird issue with OIM in my new project. I have followed the below steps to configure the flatfile reconciliation using as a trusted source.
1. Transport Provider- Shared Drive
2. Format Provider- CSV
I have filled the location for the Staging Directory(Parent) and Archiving directory. I am using Cp1251 for File Encoding.
The problem which I am facing is that as soon as I move forward from the above step for Mapping, I do not see any fields under the Source and Reconciliation Staging
in Step 3: Modify Connector Configuration. What could possibly be the reason for this? The flat file is already there in the parent directory location before starting the configuration of Flatfile GTC. There are no logs generated for this for obvious reasons. It would be great if someone can reply soon as I have been facing this issue since yesterday morning.I created a new flat file and a new connector. Now I am facing a different issue. The data is getting reconciled as per the reconciliation events and the Status is "Event Received".
Basic Mapping is;
login->User_login
firstname->First name
lastname->Last name
organization->Organization Name
User Type->Xellerate Type
Employee Type->Role
Password-> hardcoded as "abcd@12345"
The error which I am getting is;
2012-10-27 09:03:29,370 DEBUG [XELLERATE.DATABASE] select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcADJ' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_post_update_sequence>0 order by dvt.dvt_post_update_sequence
2012-10-27 09:03:29,371 INFO [XELLERATE.PERFORMANCE] Query: DB: 1, LOAD: 0, TOTAL: 1
2012-10-27 09:03:29,372 DEBUG [XELLERATE.SERVER] Class/Method: tcADJ/eventPreInsert left.
2012-10-27 09:03:29,372 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:getAllowedOperation entered.
2012-10-27 09:03:29,372 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:getAllowedOperation - Data: mstableName - Value: adj
2012-10-27 09:03:29,372 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:getAllowedOperation:else entered.
2012-10-27 09:03:29,372 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:getAllowedOperation:if moData.isNull entered.
2012-10-27 09:03:29,372 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:preWrite entered.
2012-10-27 09:03:29,372 DEBUG [XELLERATE.DATABASE] select usr_key from usr where USR_LOGIN=? and USR_STATUS!='Deleted'
2012-10-27 09:03:29,373 INFO [XELLERATE.PERFORMANCE] Query: DB: 1, LOAD: 0, TOTAL: 1
2012-10-27 09:03:29,373 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:preWrite left.
2012-10-27 09:03:29,373 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:getPreparedStatementForUpdate entered.
2012-10-27 09:03:29,373 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:getWhere entered.
2012-10-27 09:03:29,373 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:getWhere - Data: psKeyName - Value: adj_key
2012-10-27 09:03:29,373 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:getWhere - Data: msKeyValue - Value: 14
2012-10-27 09:03:29,373 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:getWhere left.
2012-10-27 09:03:29,374 DEBUG [XELLERATE.SERVER] Class/Method: tcTableDataObj:getPreparedStatementForUpdate left.
2012-10-27 09:03:29,374 DEBUG [XELLERATE.DATABASE] update adj set ADJ_PERSIST=?, ADJ_INST_NAME=?, ADJ_UPDATE=?, adj_rowver=? where adj_key=14 and adj_rowver=HEXTORAW('0000000000000000')
2012-10-27 09:03:29,374 DEBUG [XELLERATE.PREPAREDSTATEMENT] Class/Method: tcDataBase/writeStatement - Data: psSql - Value: update adj set ADJ_PERSIST=?, ADJ_INST_NAME=?, ADJ_UPDATE=?, adj_rowver=? where adj_key=14 and adj_rowver=HEXTORAW('0000000000000000')
2012-10-27 09:03:29,374 DEBUG [XELLERATE.PREPAREDSTATEMENT] Class/Method: tcDataBase/writeStatement: Param: 1 is set to null
2012-10-27 09:03:29,374 DEBUG [XELLERATE.PREPAREDSTATEMENT] Class/Method: tcDataBase/writeStatement: Param: 2 is set to null
2012-10-27 09:03:29,374 DEBUG [XELLERATE.PREPAREDSTATEMENT] Class/Method: tcDataBase/writeStatement: Param (Timestamp): 3 is set to 2012-10-27 09:03:29.372
2012-10-27 09:03:29,374 DEBUG [XELLERATE.PREPAREDSTATEMENT] Class/Method: tcDataBase/writeStatement: Param (ByteArray): 4 is set to java.io.ByteArrayInputStream@126ec30c
2012-10-27 09:03:29,376 INFO [XELLERATE.PERFORMANCE] Query: DB: 2
2012-10-27 09:03:29,377 DEBUG [XELLERATE.AUDITOR] Class/Method: AuditEngine/getAuditEngine entered.
2012-10-27 09:03:29,377 DEBUG [XELLERATE.SERVER] Class/Method: tcADJ/eventPostUpdat entered.
2012-10-27 09:03:29,377 DEBUG [XELLERATE.SERVER] Class/Method: tcADJ/updateAdpStatus entered.
2012-10-27 09:03:29,377 DEBUG [XELLERATE.SERVER] Class/Method: tcDataBase/readPartialStatement entered.
2012-10-27 09:03:29,377 INFO [XELLERATE.DATABASE] DB read: select adp.adp_key, adp_status, adp_rowver from adp adp, adt adt where adt.adp_key = adp.adp_key and adt.adt_key = 16
2012-10-27 09:03:29,377 DEBUG [XELLERATE.DATABASE] select adp.adp_key, adp_status, adp_rowver from adp adp, adt adt where adt.adp_key = adp.adp_key and adt.adt_key = 16
2012-10-27 09:03:29,378 INFO [XELLERATE.PERFORMANCE] Query: DB: 1, LOAD: 0, TOTAL: 1
2012-10-27 09:03:29,378 DEBUG [XELLERATE.SERVER] Class/Method: tcADJ:updateAdpStatus - Data: sAdpStatus - Value: Recompile
2012-10-27 09:03:29,378 DEBUG [XELLERATE.SERVER] Class/Method: tcADJ/updateAdpStatus left.
2012-10-27 09:03:29,378 DEBUG [XELLERATE.SERVER] Class/Method: tcDataBase/readPartialStatement entered.
2012-10-27 09:03:29,378 INFO [XELLERATE.DATABASE] DB read: select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcADJ' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_post_update_sequence>0 order by dvt.dvt_post_update_sequence
2012-10-27 09:03:29,379 DEBUG [XELLERATE.DATABASE] select evt.evt_key, evt.evt_name, evt.evt_package from dob dob, evt evt, dvt dvt where dob.dob_key=dvt.dob_key and dvt.evt_key=evt.evt_key and (dob.dob_name='com.thortech.xl.dataobj.tcADJ' or dob.dob_name='com.thortech.xl.dataobj.tcTableDataObj' or dob.dob_name='com.thortech.xl.dataobj.tcDataObj' ) and dvt.dvt_post_update_sequence>0 order by dvt.dvt_post_update_sequence
2012-10-27 09:03:29,380 INFO [XELLERATE.PERFORMANCE] Query: DB: 1, LOAD: 0, TOTAL: 1
2012-10-27 09:03:29,380 DEBUG [XELLERATE.SERVER] Class/Method: tcADJ/eventPostUpdat left.
2012-10-27 09:03:29,380 DEBUG [XELLERATE.SERVER] Class/Method: tcDataObj/save left.
2012-10-27 09:03:29,393 DEBUG [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: UsernamePasswordLoginModule/initialize - Data: dburl - Value: {2}
2012-10-27 09:03:29,393 DEBUG [XELLERATE.ACCOUNTMANAGEMENT] Class/Method: UsernamePasswordLoginModule/initialize - Data: dbuser - Value: {2}
Please suggest what i should do now.
Edited by: user13355494 on Oct 26, 2012 2:46 AM -
Error in loading the data from flatfile
Hello All,
when am loading the data from flat file iam getting error "ERROR4 WHEN LOADING THE EXTERNAL DATA" is it because of mapping in the transferrules or error in the flat file.
Points will be assigned to all helpful answer.
Thanks & Regards
PriyaHii Priya,
The reasons may be the file is open, the format/flatfile structure is not correct, the mapping/transfer structure may not be correct, presence of invalid characters/data inconsistency in the file, etc.
Check if the flatfile in .CSV format.
You have to save it in .CSV format for the flatfile loading to work.
Also check the connection issues between source system and BW or sometimes may be due to inactive update rules.
Refer
error 1
Find out the actual reason and let us know.
Hope this helps.
Regards,
Raghu. -
Error while collecting Custom FlatFile related InfoCubes in CTS
Hi,
I am getting the error while collecting the FlatFile related custom InfoCube that the cube is not in the version A. I did checked that the cube is in the Active version i.e. Revised Version = Active Version; Object Status = Active, executable.
Any idea how to resovle this issue ?
Here is the information on the error message.....
Object 'PPY_C101' (CUBE) of type 'InfoCube' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'PPY_C101' (in transport request CUBE) of type 'InfoCube' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Thanks,Hi,
I am getting the error while collecting the FlatFile related custom InfoCube that the cube is not in the version A. I did checked that the cube is in the Active version i.e. Revised Version = Active Version; Object Status = Active, executable.
Any idea how to resovle this issue ?
Here is the information on the error message.....
Object 'PPY_C101' (CUBE) of type 'InfoCube' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'PPY_C101' (in transport request CUBE) of type 'InfoCube' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Thanks, -
Error while loading data to ods object from flatfile
hello all
Iam loading data from flatfile to ods object and the processing type is PSA and then to data target(package by package),data arrived in PSA(its green) but in monitor the request is in red and in details tab of <b>subsequent processing</b> <b>its showing as ODS activation</b><b>?(change-log):not yet activated</b> and overall the error is <b>Missing Messages</b>.
and its also saying like "Activation of data records from ODS object ODS_SALES terminated.
and in help node its saying like data arrived in BW and try to change the request from red to green?
can anyone tell me what will be the problem?
In settings of ODS object everthing is set to automatically.
many thanks
balajiHi praveen
problem is <b>generic</b> here.
In monitor tab the <b>request</b> and <b>overall</b> the statuts is "<b>RED</b>",but when I went into the <b>mange</b> tab of ODS object here the request is "<b>GREEN</b>",but the data is not available here.but data is still available in "<b>New data</b>",how come data is not yet activated.
bcoz in settings all are set to "automatically",so there is no question of manual activation?
One more question is in Settings Iam finding one column like "<b>Unique Data Records</b>",whats's this,if v check this what happens ifnot what happens?
regrads
balaji -
Problem in Front end with BW3.5
hi friends,
now I am using BI 7.0 with front end BW3.5, it looks good. when i open the BEx, it didnot work...I think there is a component missing... If i use BI 7.0 as front end, I know that will be work.... I want to call BEx from citrix environment.... how can i find what component is missing, and how can we solve this problem...
I want to get solution with BW 3.5 front end... please guide and help me....
with hopes,
Jaya
Edited by: jaya durai on Jul 24, 2008 3:41 PMIn the environment definition,
-> External Application JDBC
-> Properties
-> Outbound JDBC Connection
You have the database URL in the "DriverProperties" field
Valid URL would be : jdbc:mysql://localhost:3306/caps
!! The doc says that this field is optional !! Seems to be an error in the doc:
Hope this helps
Seb
Maybe you are looking for
-
How to disable href/id in the generated response of a web-service
Hello All, Do I have any possibility to disbale href/id on the generated response of a web-service that use RPC-encoded format? My generated soap body looks like this: <env:Body env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"> <m:Respon
-
Problem doing partial refresh (pull) of HTML region
In my application, I have a page where on the left I have a list of documents and, on the right, selected document in PDF format. The right region is defined as HTML: <object id="DataPDF" data="f?p=&APP_ID.:18:&APP_SESSION.:APPLICATION_PROCESS=odp_sh
-
Install Real Application Clusters (RAC) and Automated Storage Management (A
Do I have to install Real Application Clusters (RAC) and Automated Storage Management (ASM) for ETL I have installed Oracle 10g Release 1 on WIndows 2000 with datawarehousing option. Is it ok Or do I need to install Oracle database again. Please help
-
I cannot see the verification letters when asked to type them in. What can I do?
If I need to post on Craigslist, etc, they will ask me to type the letter seen above, and I cannot see any letters there. Therefore, I cannot post on any website . What can I do? These are verification letters/numbers.
-
Playing music videos messes up ipod app
After I play a music video in the ipod app, there's a glitch in the layout. Whenever I reopen the ipod app, the whole screen shifts up or down. Eventually, it freezes and I have to restart my iphone. Any suggestions on how to fix this?