Timefinder mirror BCV issues after installing Solaris Cluster 3.2

I just installed Solaris Cluster 3.2, and since then, my BVC's will no longer mount. I have a case open with EMC already, just thought I check and see if anyone here has ever ran into the same issues and found a fix. The BCV job runs just fine until it comes to the time to mount it under an alternate location. This fails which I initially assumed was because SC needs the diskgroup to be registered. However, I have BCV's running on other servers that use SC3.2 as well, and they work just fine. If anyone has any past experience with this, please let me know how you overcame the problem.
TIA...

Did a rebuild with current patches, did not run JASS or an in-house hardening script on the nodes and I get the same result.
I think I might have a bug issue with the bge driver or something.
On the first node before running scinstall all nic lights are lit.
After that first node reboots from scinstall the nic lights stay lit until right before the CMM messages begin appearing on the console. At that point the interconnect lights go out and stay out physically.
No errors were detected with sccheck or in the install logs for the cluster.
I tried a rebuild of the cluster nodes using a switch (ProCurve 2626) for the interconnects rather than an ethernet cable or cross-over cable.
I have a hme interface in my V210 and V240 and I am going to use that for one of the interconnects to see if it matters.
Basically at this point it is definitely not something physical (bad cable, bad switch port, etc) but something in the cluster configuration from scinstall that is not digging the interconnects and keeping the cluster nodes from conversing.
Since the cluster isn't working anyway I can do a clintr enable node:port,switch@port and see that the ports and switch ports show as enabled by clintr status does not show an interconnect active and the physical ports are not lit.
I do see references to bgeX/0 unregistered in /var/adm/messages but I haven't found information as to what this means or what to do about it exactly yet.
Closest thing so far is this:
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6453203

Similar Messages

Strange problems after installing Solaris 10 u6 on 64-bit PC

Hi all,
I have run into some very strange issues after installing Solaris 10 update 6 on my 64-bit PC (it's almost new). The problems are with graphical applications and desktop environments based on GTK (so it seems, at least).
I have installed Solaris normally, following most of the default options and choosing the "Entire Group" software packages installation. However, after the first login I've seen that:
1. No user creation process was offered to me and I had to login as root (I find it pretty strange)
2. After logging in as root into JDK system, my screen went blank for a couple of seconds and then the system threw me back to the login screen.
3. Logging into the old CDE environment was possible, but launching Firefox from there (using a command line terminal) wasn't. It gave me the following error message:
ld.so.1: firefox-bin: fatal: libmlib.so.2: open failed: no such file or directory
ld.so.1: firefox-bin: fatal: relocation error: file /usr/bin/firefox/firefox-bin: symbol gtk_init: referenced symbol not found.
It's very strange because GTK toolkit and JDK environment are supposed to be the core functionalities provided by Solaris. Does anyone have an idea what's going on?
My system sum-up:
CPU: Intel Core 2 Quand Q6600 @ 2.4 GHz
RAM: 2 Gb of DDR2 SDRAM
Motherboard: MSI MS-7529 (Intel G31 chipset)
Monitor: AOC LM725
Graphics card: NVIDIA GeForce 9400 GT
Hard disk: 2 Western Digital HDs (SATA) 320 Gb each,
1 Western Digital external USB HD MyBook Essential 2, 500 Gb
DVD drives: 2 LG DVD drives (SATA)
Network card: Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC
I use my system in the following way:
On the first hard disk, I have a one-partition 32-bit Windows XP SP3 installation (ported from my old computer).
On the second hard disk, I have a functioning Fedora Core 9 installed on the first half of the disk's space (the installation is self-organized into several Linux partitions, e. g. /boot, /swap etc; I am a newbie so I don't know too much about Linux partitioning - only specified to Fedora how much space it could use for its volume group). I installed Solaris onto the second half of the second disk.
It has be noted that my USB external drive seemed to conflict with the network or graphics cards during the Fedora installation and caused it to hang sporadically, so I installed Fedora with this disk detached. I also detached it when I was installing Solaris, though it seems to have not influenced the problems I experienced. I also have attempted installing Solaris before I did so with Fedora, but had the same issues.

Well, it seems that the cause of the problem was that my DVD image was just corrupted - I didn't check it vs MD5 codes supplied by Sun assuming it went automatically OK. I downloaded the image again (this time it was OK), reinstalled the system and successfully logged into JDS. However, I am still puzzled why Solaris doesn't offer to create a default non-root user during the installation process.

Issues after installing Classic on OS 10.4

Background and System
I have a Power Mac G3 350Mhz Rev 2 Blue and White, 512MB, 40GB, DVD ROM
running 10.4.9 installed from Retail DVD. Firmware up to date. 2x 20 GB partitions formatted as Extended
Prior to this issue OS X has been running well.
Issue:
After installing OS 9.2.1 to second partition OS X will now not boot up from DVD nor it's partition
Solutions tried:
I wanted to install a Classic environment so used a Retail OS 9.2.1 Bootable CD and did a full install to the second partition.
After the install finished and the system restarted, set on the OS X (Partition1) for start up the system hangs right after the Apple "Chime". with no signal to video card
Attempted to then boot from OS 10.4 DVD but this does not get detected when holding "c" down for boot up from CD option. This worked perfectly before.
Have run OS 9.2.1 Disk Aid Verify and both partitions are ok. The system will boot from the 9.2.1 CD and partition but anything to do OS X now will not work. I also tried an Ubuntu 6.06 Live CD but this will not now boot either.
Checked firmware and tried to re run firmware update and this advised my firmware was up to date.
Any other suggestions?
Thanks

The only thing I can think of is that when you installed the 10.4.9 OS you didn't option to install OS 9 drivers.

Having issues after installing Essbase V9.3.1,configuring the SQL interface

I am having issues after installing Essbase V9.3.1 and configuring the SQL interface. we are using UNIX/AIX box for our Essbase server and UDB DB2 9.1 SP6 as our SQL Interface.
When tried to run an ESSCMD script to perform BUILDDIM operation on Essbase application using the load rule (with the SQL interface), got the error as recorded in the application log file and is attached at the bottom and the .odbc.ini file on the server looks as follows.
Can somebody tell me whether .odbc.ini needs any correction or what else should I do to correct the issue and able to work thru using SQL interface? Appreciate any help provided in this regard. Thanks,
.odbc.ini
[ODBC Data Sources]
DOLU003=IBM DB2 ODBC DRIVER
[DOLU003]
Driver=/home/db2inst1/sqllib/lib/libdb2.a
Database=DOLU003
[ODBC]
Trace=0
TraceFile=odbctrace.out
InstallDir=/home/db2inst1/sqllib/odbclib
[Mon Apr 20 15:16:29 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1013091)
Received Command [SQLRetrieve] from user [Olapadm]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021020)
Cannot read SQL driver name for [] from [home/hyperion/.odbc.ini]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021004)
Connection String is generated
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021041)
Connection String is [DSN=DOLU003;UID=...;PWD=...]
[Mon Apr 20 15:16:43 2009]Local/New_Bud/Budget/Olapadm/Info(1021006)
SELECT Statement [SELECT * FROM DB2OLADM.BD_DIMENSION_DEF_PC WHERE DIMENSION_ID
= 12 ORDER BY TREE_NODE_NUM, PARENT_NODE, CHILD_NODE] is generated
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021013)
ODBC Layer Error: [7] ==> [[DataDirect][ODBC 20101 driver]6013]
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Info(1021014)
ODBC Layer Error: Native Error code [0]
[Mon Apr 20 15:16:44 2009]Local/New_Bud/Budget/Olapadm/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
--------------------------------------------------------------------------------------------------------------------------------------------

I had similar errors when first setting up the SQL interface. Are you on a 64 bit operating system on the essbase server? If so Essbase needs to use the 32 bit odbc driver, not the default 64 bit driver.
The 32 bit driver is still available here SysWOW64\odbcad32.exe <-----This is the 32 bit (Use)
The Administrative tools by default uses system32\odbcad32.exe <----This is the 64 bit (Don't Use)
Once I opened the 32 bit driver interface directly and set it up the errors went away.

Out Of Frequency problem -- After Installing solaris 10 x86

Hi Solarians,
After installing solaris 10, I am getting "*Out Of Frequency*" problem and I am not able to login to Desktop session. Please let me know configuration changes that i need to make along with exact paths as i am new to solaris.Currently i am running dual OS (XP and Solaris).
Out of Frequency
HF: 42.7 KHZ
VF: 40.0 HZ
Operating Frequency
HF: 30 - 71 KHZ
VF: 50 - 160 HZ
Please help me solve this problem, Thanks in advance .....
Thanks,
Mahesh

hi;
I faced that problem when I was a beginner on solaris as you were. I tried to install solaris to my windows installed x86 based PC. in my fisrst few attempts ý always saw that message, afterwards somehow I managed to install solaris to my PC but this time windows failed.I think that is because of the inconsistencies between those OS but if you need to install solaris you can use VM ware workstation with this software you can use both OS without problems.

Local disks are in FAIL status after installing the cluster

The /var/adm/messages log isn't giving me much info to go on. This has happened twice now. After installing the cluster, my local disks are in a FAIL status and the cluster is not giving me much information why.
It's a two-node cluster w/ x2100 M2s.
Any ideas?
-Hedo

when I run cldevice status -v, it reports that the two local disks are in FAIL status on each node.
That's all that's going on right now. Everything else seems to be perfect, other then those disks in FAIL status.
== from /var/adm/messages ==
Jan 15 10:17:38 frito Cluster.scdpmd: [ID 977412 daemon.notice] The state of the path to device: /dev/did/rdsk/d12s0 has changed to FAILED
Jan 15 10:17:38 frito Cluster.scdpmd: [ID 977412 daemon.notice] The state of the path to device: /dev/did/rdsk/d11s0 has changed to FAILED
-hedo.

Cannot start Xserver after installing Solaris 10 08/07 for Sparc

Hi,
Has anyone ecountered the following promblem after installing Solaris 10 08/07 for a Sparc processor .I am trying to exceed to the server but cannot get access to CDE or Gnome as the Xserver is not running!
getting the following message on booting not sure if related.
SUNW-MSG-ID: SUNOS-8000-1L, TYPE: Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Thu Nov 8 10:07:20 CET 2007
PLATFORM: SUNW,Netra-T2000, CSN: -, HOSTNAME:
SOURCE: eft, REV: 1.16
EVENT-ID: e627d1f9-bd6e-c850-dd0e-a5dbfaa64e48
DESC: The EFT Diagnosis Engine encountered telemetry for which it is unable to p
roduce a diagnosis. Refer to http://sun.com/msg/SUNOS-8000-1L for more informat
ion.
AUTO-RESPONSE: Error reports from the component will be logged for examination b
y Sun.
IMPACT: Automated diagnosis and response for these events will not occur.
REC-ACTION: Run pkgchk -n SUNWfmd to ensure that fault management software is in
stalled properly. Contact Sun for support.
I Have ran this pkgchk -n SUNWfmd and there is no response
I have tried creating the xorg.conf file /usr/X11/bin/Xorgconfig as recommened form a similar thread but this has not worked.
I can telnet when I try to ssh it is asking me for interactive kb security check and can't login with root password...
which works when I telent!!
Has anyone ecountered this before??
Hendy

1-Which server are u using? Xorg or Xsun?
2-did you try /usr/X11/bin/xorgcfg ?
3-did you try kdmconfig ?

Dreamweaver CS4 having issues after installing PS CS6 Beta

Hi All,
I'm having issues with Dreamweaver CS4 after installing Photoshop CS6 Beta. I'm getting the follwing erros when trying to open any html file (see attached image).
Once I click OK, the file will open, also now; any copy and paste commands will not work. Anyone else experiencing any problems with other apps after installing this beta version?
Any help and feedback is much appreciated, thanks!

Re :Re: Dreamweaver CS4 having issues after installing PS CS6 Beta
Just a thought ...
This may help!
Uninstall the Beta Version of Photoshop CS6 now and then restart your computer and see if that works.
Open the CS4 programs and see if that fixed the problem and it is all working as it should again.
It is worth a try!
All the best.

Issues after installing Mavericks

I am having a ton of issues after installing macericks on wed evening, on my MBP 15" 2.5 GHz i7 with 8GB of memory,
I have a task com.apple.internetaccouts, and com.apple.MailServiceAgent, taking upwards of 100% CPU at time and the fan will go full speed, and earlier today i had a msg come up that i had run out of usable memory and the sytem had paused programs, I have restarted a few times and still the same things are coming up and the system has become really slow.
would think that with this system not being that old, that i should not be having these types of issues, if there is something that someone could lead me to ths casue i thnk you
Thanks
Doug

Had this issue again today on my wife's iMac. This was after the Mail.app update that was recently released. I now have messed with this issue enough that I believe I have figured it out.
I used to have a plugin for Mail called HTTPMail that was used to access Hotmail prior to them having POP/IMAP. It seems that removing the account from Mail left some residual account details in the ~/Library/Mail/V2/MailData/Accounts.plist file. Mavericks Mail.app chokes on this account detail and starts duplicating it numerous times. That's why the Accounts.plist file grows so large.
If you open the Accounts.plist file in a text editor (TextWrangler would be my suggestion), find any <dict> entry that points to services.msn.com in any way and remove all those <dict>...</dict> entries, it should resolve the issue. Warning though - I had to delete hundreds of entries so it took a while to do. Once I finished it though, my wife's e-mail has been working fine.

Anyone else having battery life issues after installing Lion?

Anyone else having battery life issues after installing Lion?

Blue Sun Wing wrote:
I have 7.1
I think I would like to uninstall Lion as well. I'd rather have my battery life back.
See if this is helpful: http://www.iphone-my.com/mac/downgrading-lion-snow-leopard/

Error after Installing Solaris

Hi Admins
I am getting the following problem after the installation of Solaris 10 on a sunfire v440.Can someone please help me out.I am not sure about the cause of the error output because i am still a junior solaris admin.
Please help me fix this problem.Any Ideas are welcome.
============================================================
Sun Fire V440, No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.17.2, 8192 MB memory installed, Serial #63181061.
Ethernet address 0:3:ba:c4:11:5, Host ID: 83c41105.
Boot device: disk File and args:
WARNING: cannot open system file: etc/system
SunOS Release 5.10 Version Generic_118833-33 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
ERROR: Last Trap: Fast Instruction Access MMU Miss
Error -256
Evaluating:
Tried to access instance-specific data with no current instance
ERROR: Last Trap: Fast Instruction Access MMU Miss
Evaluating:
Error -256
Stack Underflow
========================================================
Thanks in advance

I have same problem at before. And I can using same hardware for install windows XP.
After, I try to using very good quality DVDROM, very quality and clearly CD install solaris 10. The problem would sometime happen.
I feel the CD have little dirty, you may not install solaris.

Issues after installing Hotfix Rollup 5 for SP3

Hi,
Last weekend we installed Hotfix Rollup Pack 5 for SP3 on our (single) Exchange 2010 Enterprise server.
This was needed to fix the WebApp Light issue with IE11 and to fix the problem where users were unsable to delete mails sent from multifunctionals.
These 2 issues were fixed by installing the hotfix rollup pack, but now our users have different problems...
Some users (not all of them, haven't found a common denominator yet) report that they don't see new mails in their Outlook 2010 box, even though they got the envelope notifier.
When they change folder and back to the Inbox the new mail is suddenly visible.
Same sort of "delay" happens when users mark a message for follow-up or try to change a message from unread to read.
Some users also report that they see delegated mailboxes (mailboxes from other users that they have full mailbox access to) twice in their Outlook 2010.
Outlook 2010 is running in online mode (because it's running on terminal/citrix servers), so it's no issue with caching as far as I understand.
I've already checked if there are any updates for Outlook available, but we've installed them all already.
I though I'd found something:
Noticed a lot of errors in the application log on the Exchange Server which pointed me to this:
http://theintegrity.co.uk/2010/08/mapi-session-exceeded-the-maximum-of-500-objects-of-type-objtfolder/
I've added the registry values now with a value of 1500, but unfortunately this didn't help.
The errors in the eventlog are gone, but even after restarting the IS some users still have these problems.
One user reported that it takes about 7 minutes for a read mail to actually switch to "read" when looking at his inbox.
Did anyone else notice these problems? And maybe have a fix for them?
I really don't want to roll back the update :(
I even rebooted the Exchange Server after installing the rollup even though that wasn't even necessary
Thanks in advance!
Regards,
Jeroen

Correct - http://support.microsoft.com/kb/2925273 discusses this issue.
If you do raise a support case to request this, please ensure that you review and understand the requirements for IU installation and removal.
For example:   You *MUST* manually remove it prior to installing Exchange 2010 SP3 RU6.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

CD Driver Issues after installing 11.1.4

After installing Itunes 11.1.4, my HP computer, running Windows 7, could no longer find the CD drive. Upon investigation, someone suggested I update my registry to remove some entries. I did the following:
Start, enter regedit in search bar,
Open regedit
Left hand menus click HKEY_LOCAL_MACHINE
SYSTEM
CURRENT CONTROL SET
CONTROL
CLASS
Then need to find {4D36E965-E325........... (are more figures but not needed)
on right hand window see if there is an upper filter or lower filter.....right click and delete the values if either are there.
RESTART...
This worked, but now Itunes complains every time I open it, saying some registry settings are missing for my CD drivers. I've used Itunes on this computer succssessfully for years, until this upgrade. Apple, whatever you did, please undo it. Horrible release...

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Facetime issue - after installing a new logic board due to liquid damage.

I installed a new logic board this week.. after installing the os x operation system and then upgrading it to mavericks and i used migration assistant to load my backuped user from an external disk.
I tried to log in using my apple id ( which is verified) it couldn't log in beacuse "could not sign in. please check your network connection and try again"
and i did all the updates of mavericks. i tried also before installing mavericks i thougt upgrading will fix it..
i saw on forums that i should add 2 DNS's (8888 and 8844) didn't work.
i tried connection to my phones hotspot - didn't work.
i also went to the firewall thing to allow it recieve cennections..
pleassee help!!
is there a way to reinstall the facetime or something?!?!?!

My problem solved could possiblly be your solution: Check to make sure your system serial number is being read by your logic baord. If the tech forgot to reenter the serial number, it's a known issue for Facetime and Messages (apparantly not know enough yet though, no tech bulliten exists on the topic).
I spent several days trouble shooting my inablility to login to my account with Facetime or Messages (other cloud services worked) after upgrading to Mavericks. I went as far as doing a clean install on my hard drive after spending two hours with a baffled mac tech in a retail store and many hours searching the message boards.
I have never had a logic board (or hard drive) replaced on my Macbook Air, but somehow after the Mavericks update the logic board stopped reading the serial number on my system. It took a call to Apple and a ticket opened to engineering to figure this out (after I uploaded log files).
They were puzzled I experienced this without a logic board replacement, but it was indeed the root cause of the facetime and messages apps failing to log in, and said they'd run in to it recently more than once.
Wish I knew how to post this unbiquitously across all the boards for folks to troubleshoot by simply looking at their system info in the Apple menu; Apple scheduled an appointment for me at an Apple genius bar and it was fixed in fifteen minutes.

Update_prebinding issues after installing security-update2009-001-ppc

Hi there,
after installing all required software updates including secupd2009-001ppc and installing safari4beta, safari would no longer start up. It just bounced once in the dock and then crashed. After uninstalling safari4beta using the safari4beta uninstaller which is to restore safari3.2.1 and rebooting, still safari won't startup. So I deleted the app and reinstalled it from the appropriate installer. Now at least this works again.
But upon booting (in verbose mode) I get the message that update_prebinding fails due to too many errors. When I try to do update_prebinding manually on the terminal I get the following error messages:
"$ sudo update_prebinding -root -force -debug
dyld: warning DYLDROOTPATH not used because it contains a non-absolute path
dyld: image not prebound, so could not use prebinding in /usr/bin/updateprebindingcore
update_prebinding: warning: could not load /usr/bin/updateprebindingcore: no suitable image found. Did find:
/usr/bin/updateprebindingcore: not a dylib
dyld: image slid, so could not use prebinding in /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
update_prebinding: warning: could not link /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services: dylib not prebound: /usr/lib/libxml2.2.dylib
update_prebinding: too many errors (101)
update_prebinding: error: terminating"
The error message is much longer, but I hope this short version will do for analysis.
How can this be fixed? I read that some people encountered the same problem with secupd2008-006 and that Apple promised to fix it. But this was back in October last year.
I also wonder whether this is an issue with the secupdates or with Safari proper.
Thanks in advance for your help.

It's still broken in my system also. I just got the following in Terminal:
$ sudo update_prebinding -force -root /
Password:
update_prebinding: too many errors (101)
update_prebinding: error: terminating
In addition, the explanatory [support page for Tinker Tool System|http://www.bresink.de/osx/193281/issues.html] that I listed earlier hasn't been changed.
I had a feeling this was the case, because when an Apple software update displays "Optimizing System Performance" at the end of an installation, it is actually updating prebinding. This step used to take a few minutes in my system, which is normal, but for the last few months it has been lasting only a few seconds, probably because it has been terminating prematurely with this error.

Timefinder mirror BCV issues after installing Solaris Cluster 3.2

Similar Messages

Maybe you are looking for