Timeline and Kiosk

I will be updating an older hall of fame kiosk built with Macromedia Director. I will need to add over 200 pages with links. I was wandering is there a limit to the timeline in Director?

Don’t know if there’s a limit, but 200 doesn’t sound like many frames.

Similar Messages

  • Unable to see video & audio tracks as shown in "Create a sequence or timeline and add audio"

    hi,
    I'm on the https://helpx.adobe.com/creative-cloud/learn/start/premiere.html page trying to work through the Create a sequence or timeline and add audio tutorial
    And cannot see the Video & Audio, as shown in the bottom right sub-window
    I'm using a trial version of Premier pro CC downloaded yesterday. On my mac mini running 10.9.2
    does anyone know how to fix this problem?
    thanks
    david
    I am able to hear the audio.
    Message was edited by: spottedsilvertabby

    Hi,
    Error 7 is when a router or the connection to the router is broken in some way.
    Some devices have features such as Denial Of Service protection (DoS) that cut a particular Internet Port when it thinks too much data is coming (Presuming it is an attack.)
    iChat 5 in Leopard is not capped by the System Preferences > Quicktime Streaming speed (which we used to suggest was set at 1.5Mbps)
    It now sees your whole Connection speed and your Upload may be much faster than this.
    Your Download is likely to be much faster. However iChat will tend to operate at the lower figure of your Upload.
    DoS features are threshold based.
    You may now be bumping in to this Threshold where you were not before.
    SPI (Stateful packet Inspection) does a different job but has the same effect when it is overloaded by the speed of the data.
    If you have either of these features, turn them Off (Disable them)
    7:25 PM Friday; October 2, 2009

  • Text created in Premiere showing other text files in the timeline and exports.

    Hi,
    I'm creating slates with text generated in Premiere. For each new slate I am duplicating a text layer, Option + Dragging the duplicate file over the text I'd like to replace, then opening the new text layer in the text editor and updating the information.
    Things seem fine at first and then randomly text layers in the timeline will show text from other files in the timeline. If I open the text file up in the text editor I see the correct info but not in the timeline.
    The only fix I have found is to delete render files, move the text layer around in the timeline, quit and re-open. But still, sometimes when I export, the export preview window will show the wrong text and when I export the file I create shows the wrong text as well.
    It seems like Premiere is getting confused by multiple text files in the timeline and is pointing to the wrong cache files.
    Thoughts would be a huge help!

    Thanks for the tip Kevin. Anything I can do to avoid this in the future?
    I've had this happen on a number of projects. My media and project files are on a SAN, cache and previews are local.
    Thanks,
    Mike Brown
    P: (401) 743-7452

  • Poor sound quality in timeline and export; fine in Source?

    Hello all.
    Newbie to Pr but experienced pro in digital audio. I'm stumped and know I'm just missing something somewhere.
    I've made a music video for one of my songs. The graphics are all done (in AE), imported to Pr and eveything looks great. I import the final mix of the audio and it sounds very low quality when played from the timeline and in the final output, regardless of format (I've tried several presets and custom settings as well). I played around and noticed that the audio sounds fine when played from the Source window inside Premier.
    The Pr session is comrised of 18 video tracks (not all playing at once, of course) and one stereo audio track.
    I've tried re-exporting the audio from Logic at different bit depths, sample rates and file formats (mp3, wav, AAC, etc) but the results are the same every time: Source (Pr)sounds fine, Logic output sounds fine, rendered / timeline playback sounds like very low quality mp3 and final product sounds just as bad.
    I've tried everything I can think of. I hope one of you can show me what I'm missing.
    TIA!
    Mark
    Premier Pro CC
    Processor  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory  8 GB 800 MHz DDR2 FB-DIMM
    Graphics  ATI Radeon HD 2600 XT 256 MB
    Software  OS X 10.9.1 (13B42)

    Thank you for the reply!
    I was experiencing the same results no matter what export settings I used. Plus the poor sound quality was present in the timeline itself, without even exporting the project.
    I finally threw my hands up, started a completely new project, drug the same audio file in... sounded fine. Copied / Pasted the video clips from the original, broken project and boom, eveything is fixed. Yeah, corrupted Pr file it turns out. All I had to do was start a new project and import all the old components.
    I've had to do this in Logic a lot (increasingly, these days). I just wish I'd tried it 10 hours earlier! Ha.
    Anyway, problem solved, and thanks very much!

  • Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

    Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

    If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

  • The timeline  and cursor move very jerky (in a continual chattery motion) in Windows 8.1

    in my project the timeline and/or the cursor move very jerky (in a continual chattery motion )  in windows 8.1
    i have set the Windows Software Compatibility setting for their "Window 7 emulator"  and the condition still persists.
    also the "fullscreen playback"  for the project used to  be very fine resolution and now it is very mushy...
    all  this tells me there are real problem with my Premier Element 10

    Littlefeather
    You are running Premiere Elements 10 on Windows 8.1 64 bit. The program works just fine in Windows 8.1 64 bit when run Windows 8.1.
    So do not go altering to another operating system. I know this first hand.
    The immediate factor that needs ruling in or out is your video card/graphics card. Specifically "Does your Windows 8.1 64 bit use
    a NVIDIA GeForce card? If so, that may be your answer. See Announcement at the top of this forum which describe the Premiere
    Elements 10 NVIDIA GeForce problem and gives the fix of how to roll back the card's driver version to get Premiere Elements 10
    to work for you.
    Once we are assured that you are not afflicted by Premiere Elements 10 NVIDIA GeForce syndrome and also know that your current
    video card/graphics card driver is up to date, then we can move on to seek other factors that may be causing the problem.
    For your convenience, the following is a copy/paste of the Announcement about the issue as it appears at the top of this forum.
    All the links and how tos that you will need are in this announcement.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches
    specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then
    the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The
    typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA
    nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    Please do not hesitate to ask if you need clarification on any of this information.
    We will be watching for your reply.
    Thank you.
    ATR

  • I'd like to toggle between the source and timeline and bypass the program tab - what is this called in the shortcut tab?

    When editing, I have to press my shortcut twice to get back to the source window as it goes via the program monitor first. Is there an assignable shortcut just between the timeline and source? If so, what is it called?

    If so many people have the same question and concern about this, why is it consistently ignored?  I've seen countless posts like this that are told to ignore the logs or to only dump when asked to. How can those of us that have these questions get an answer?  Can I im someone who can help me or are they being ignored because it it evidence that our devices have been jailbroken without our knowledge?
    If you can point me in the direction of someone who is willing to help I would greatly appreciate it!
    Thanks in advance!

  • How do I select an area on a clip in a timeline and copy and paste it ..

    How do I select an area of a clip in the timeline and copy and paste the video track only, several times on the tracks just above it?
    Thank You in Advance,
    Sebastian

    Select the range selection tool (ggg is the keyboard shortcut), then drag through the clip to select the area you want to copy then paste... it will paste only what's selected.
    Jerry

  • In an HDV sequence can I "scrub" the timeline and record it via FW to tape?

    In an HDV sequence can I "scrub" the timeline and record it via FW to tape?
    In standard definition I used to be able to do this via Firewire to my mini-dv deck. But now I am working with the Canon Vixia30, an HDV camera. I'd like to be able to scrub the time line back and forth at varying speeds and record this scrubbing live (rather than doing it with Motion software.) Is there anyway to "record" this action, either onto tape or digitally, while maintaining the HD resolution?
    If possible I'd like to figure out how to do this without buying extra equipment. I understand I could get a Matrox MO2 Mini box ($450.) to output the live HD signal, but then how to record the HD signal from the Matrox box? (my camera only has HDMI out, not in.)
    Thank you for your input.

    And if you capture your footage as ProRes (as I see discussed in another thread), you cannot output to HDV via firewire. It would be pointless. To go from a lossy format to ProRes to edit...then convert back to HDV. Typically people who shoot HDv never master back to HDV, as it isn't a mastering format.
    And yes, the MAX is totally worth it. Compression times faster than RT (meaning less time to compress than the timeline is long...I did 90 min timeline in 75 min yesterday). Worth it? Depends how much your time is worth. TO me, I'd like to have the compression done in 75 minutes opposed to 3-4 hours.
    Shane

  • How do I revert to original footage in Final Cut Pro X version 10.0.9, for some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?

    How do I revert to original footage in Final Cut Pro X version 10.0.9?
    For some reason I have lost some audio in my timeline and would like to start again but cannot get the original footage?
    Only the edited version which is no good without the audio?
    Please  Help

    What format is your problem clip? Are there wave forms visible in the section without sound?
    Right click on the clip in the event broswer and choose Reveal in Finder; open the clip in Quick Time to confirm that there is sound throughout at that stage of your workflow.
    Russ

  • Timeline and full screen view in PSE11

    I have read as many reviews of PSE11 as I can find but none have mentioned the Timeline, which I use every day. Does it still exist in PSE11? What about the full screen view and compare side by side view? Do they still exist. If they do, can you still see the image full-size by clicking on it in full screen view?

    Timeline and Full Screen View exists in PSE11 and all the earlier functionalities present in full screen view are present. The Timeline and Full Screen View can be accessed from View menu of Elements Organizer.

  • I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but can't it won't drag to the timeline. I'm using FCE

    I'm trying to reverb an audio clip in my timeline and I can't find the effect tab in the browser to drag to my audio clip to reverb. I can reverb the clip in the viewer but it won't drag to the timeline. I'm using FCE

    You cannot drag the effects themselves to the timeline.  You add them to a clip in the Viewer, just as you have done. 
    If the clip was already in the timeline when you  opened it in the Viewer (by double-clicking it in the timeline to open it in the Viewer) and then added the reverb effect, there is nothing further to do, you have added the effect to the clip.  You don't drag it back to the timeline.
    You only have to drag the clip to the timeline if the clip was not already in the timeline (for example, if you opened the clip from the FCE Browser; or set different In and Out points in a master clip to use a different portion of the master clip in a different location in your timeline).
    Depending on the effect you add, you may have to render the timeline after adding the effect.  But I don't think reverb requires immediate rendering.  One other note, you said you were working with an audio clip ... audio clips need to be AIFF (not MP3 or something else) and preferably 16-bit stereo.

  • I have imported some studio footage to my timeline and when i play it back the playback screen is green, even the footage in the timeline is green. anybody have a solution? thanks!

    I have imported some studio footage to my timeline and when i play it back the playback screen is green, even the footage in the timeline is green. anybody have a solution? thanks!

    Exactly WHAT did you import?
    Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • Using ext monitor for timeline and laptop screen as preview?

    is it possible that when i connect my external monitor to my macbook pro i can use the external for the timeline and the laptop screen for the previewing?
    cheers

    I'm trying to do this exact same thing and am coming to the conclusion that it is not possible given my setup. I have a MacBook Pro 2.2 Intel Core 2 Duo with 4GB of RAM and a NIVIDIA GeForce 8600M GT Graphics Card. I'm running FCS 3 and all media is read from a 1TB Seagate 7200 SATA drive read through a SeriTek 2SM2 PCI card in the Express Slot.
    You can easily arrange your monitors to do what you're asking (as outlined above), but the problem is the Graphics Card is not powerful enough to run both monitors and you will experience dropped frames with any HD codecs. I've tried XDCAM, DVCPROHD and ProRes 422 -- all dropped frames immediately. In fact, even if I use the "closed clamshell" mode, so the graphics card is powering ONLY the external monitor, I still get the same dropped frames issue. The only way I can edit or play back without dropped frames is by using NO external monitor whatsoever.
    Is this a unique problem for me? Is there a solution to this? Would the new 17 inch i5's with a NVIDIA GeForce GT 330M (512MB) be able to power an external monitor?
    EDIT: And the External Monitor is a Dell 2408WFP connected through the DVI port.
    Message was edited by: Mr. Landers

  • How to break a long project in 3 smaller timelines and assembling them back

    Hi,
    I'm presently working on a big project (a 90 min long documentary). I took advantage of tips from other user to speed up FCPX but now I'm at a point where I fell in need of a radical switch to give breath to my mac (btw I just switched to a new iMac with 16gb of Ram)
    I've been wondering about an advice which was gave me from Russ H on this forum: I'm presently at minute 60, he suggested me to create another timeline for the last 30 min.
    I think I have to go further ahed, I need to break the exisiting timeline in two, so to have two 30min long TL. And then I have to create a third TL with the last 30 min.
    Here we go with my questions: 1) to have new timelines I need to create/duplicate projects? Or I can just associate more timelines to the same one?
    2) If not I think I have to duplicate my project three time and then cutting the 30'min segment which I don't need to be in that project...and then of course I have to start building my third edit in the third 30min TL
    3) Here is the point which make me worried the most...At the end of my work how can I put everything back togheter? Is there any "merge TL" function? I should just export 3 masterfile and then assemble them? I should just put the 3 file on XDCAM disc as clip to be playied in a row?
    Thank you in advance for your help,
    Nico

    As I recall, the suggestion to create separate projects was one of several to address increasingly sluggish performance as your project grew in length. The idea was that by opening and working on shorter timelines, you would place less of a processing burden on your machine.
    Now that you have a newer, more powerful  iMac, it may not be necessary to break up that project.
    If you still think it is desirable to break up the project, I would stay within the existing library and create a new project for the last part of the doc.  If you are still working on the first 60 minutes section and you want to work in smaller projects, create two more empty projects. Then select two sections of the original and paste them to the new projects' timelines. When you have finished all three sections, create a fourth project and paste copies of the three into it.
    There is no merge timeline command, but copy paste is pretty bullet proof. Click in the timeline window to make it active. Hit Command-A to select all; Command -C to copy, Open the empty project and hit Command-V to copy. Just make sure that your playhead is at the last frame of the sequence before you paste any more sections into the "omnibus" timeline and it should go quite smoothly.
    Russ

Maybe you are looking for