*** Timeline doesn't playback properly

New problem here - ugh.
I was editing fine in this FCP project but then all of a sudden the image appears to be frozen but I can hear the audio as the timeline plays out, even though the playhead isn't moving. If I have the playhead in the timeline and press the spacebar, I can here the audio and when I press the space bar again, the playhead is now magically 3 inches ahead and the image under it is stopped at that point.
What gives? Anyone know how to solve this one? It happens in every one of my sequences and I've tried re-starting and trashing preferences with still no luck...
HELP!

#15 White or Black Canvas or Viewer
Shane's Stock Answer #15: White or Black Canvas or Viewer
Make sure the canvas or viewer are selected then go to VIEW>CHANNELS and set it to RGB. It might be set to ALPHA.
Shane

Similar Messages

  • ITunes takes hours to import CDs and doesn't playback properly

    I recently bought four CDs (all by the same artist) and only one of the four will import to iTunes.  The first CD imported in about five minutes, and there were no problems.
    Despite iTunes still recognising the track titles and other info, the other three CDs took literally hours each to import just the first track, and when I tried to play them back, the music was practically inaudible because there was some kind of strange white noise over the top.
    I have checked the discs and they're all clean, and none of them are pirated either, so I'm really confused as to what could be causing the problem. I couldn't see anybody else having this exact problem so I'm not entirely sure what to do about it! Any help would be really appreciated!

    First of all - songs do go to the Music app for playing on the iPad - not iTunes. Look in the Music app. If it's not there - this may help ....
    When you sync the iPad with iTunes - you have to select the music to sync within the Music Tab of iTunes. the Sync Music Heading must be checked and the albums, artists, playlists, etc must be selected as well in order to sync.
    These kb articles should be of some help. It works the same way on the iPad.
    Syncing music to iPod or iPhone
    iOS: Syncing with iTunes

  • When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?

    When I import video and place it into timeline as a raw file with no fx or any added processing I get the message that the video is unrendered and therefore it doesn´t playback?

    FCE can use DV or AIC video formats natively.  Any other format will need to be converted to one of those two if you want to avoid constant rendering.  The clips you use must match the Sequence settings.
    -DH

  • Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

    Hello!
    I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
    Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
    I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
    things I have tried and they still not help:
    # drivers replacement, original were released in 2004. I installed recent version.
    # driver settings, low latency, high latency
    # asio and different settings
    # pluging the interface to another usb socket.
    # trying what happens when I use battery and when I use adapter
    # updated bios
    # turned off onboard units such as wifi card, sound card
    # checked IRQ list
    pops still appear.
    my config:
    Toshiba Satellite Pro L20
    Win XP Home SP3
    Celeron M 1,5GHz
    896Mb ram
    M-Audio Fast Track USB, drivers: 6.0.2
    Kind regards

    Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
    I installed Windows on this computer end set it to best performance possible.
    Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
    Message was edited by: lidia.pochron

  • When I compress my movie to quicktime, the audio doesn't sync properly, even though it looks fine in iMovie. How do I fix this?

    When I compress my movie to quicktime, the audio doesn't sync properly, even though it looks fine in iMovie. How do I fix this?

    Audio on the timeline, especially stream, tends to play very reliably. Is this project under any NDA or can you provide a FLA to examine? Let me know if you want to private message it and I'll shoot you a message.
    What version of Flash Player are you targeting and is this AS2 or AS3?

  • My palm m105's touch screen doesn't work properly after a sync.

    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    My palm m105's touch screen doesn't work properly after a sync.
    I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
    Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
    Thanks in advance!
    Post relates to: Palm m105
    Post relates to: Palm m105

        Maldoman578,
    Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • The first page doesn't open properly

    When I updated Fireforx to the 5th version, it now doesn't work properly. To open th1st page it takes ages and then the small window comes out with the message that scenario: chrome:/tavgp/content/libs/include/js:595 is busy or doesn't answer, then I close this window and the page opens.

    ''getting Unresponsive Script -- Script: chrome://tavgp/content/libs/include.js:595''
    Script busy /AVG tavgp /
    * https://support.mozilla.com/en-US/questions/843822
    * https://support.mozilla.com/en-US/questions/854642
    * http://kb.mozillazine.org/Problematic_extensions

  • Since itunes 2.0.4 has been downloaded. My ipod doesn't synchronize properly/ at all.The LED screen shows  "copy 1 or 2 from 101" and it will remain like that. It looks like sync but there's nothing to happen. It doesn't stop by it self. How to solve?

    Since itunes 2.0.4 has been downloaded my ipod doesn't synchronize properly/ at all. The LED screen shows çopying 1 or 2 from 101' and itt will remain like that.
    It looks like sync but nothing is happening. The sync doesn't stop by itself. Is there anybody to solve this problem? In previous versions never a problem.

    I have exactly the same issues with my new 80G iPOD. I have found that when connecting to my PC, the iPOD does not start iTUNES 7. This can be resolved by stopping the iPOD Service in Computer Management, connecting the iPOD and then starting it again. Then when you start iTUNES it finds the iPOD. - http://docs.info.apple.com/article.html?artnum=93716
    Seems like a stupid long-winded way to do things, but at least you can get some stuff on to your iPOD.
    As far as using Restore goes - I just get the restoring iPOD message you described, which it blatantly isn't :((
    DELL   Windows XP Pro  

  • My Safari doesn't work properly after installing Lion.  Don't like it, how can I uninstall? (Cloud not worth it)?

    I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac.  My Safari doesn't work properly anymore.  Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall?  Thanks,

    Wipe the drive clean and install Snow Leopard from your install disk.
    Might be less work fixing Safari. Try Resetting Safari.

  • I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

    I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
    Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

    Hey, There are afew things you can try.
    - Simply turn your phone off and back on again
    - Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
    - Back up your iPhone to your PC, then restore it..
    this ones last cause I think you may have tried it already..
    - Close all open applications
    Hope this helps!
       Kieran.

  • Apple tv 3 airplay doesn't work properly on Itunes 10.6.1

    So me and my dad recently bought the new apple tv and everything works fine except for a few things, he doesn't connect properly with Itunes so I can't use Airplay and Homesharing. Is there a solution for this? I've seen more discussions on the community but haven't discovered a good solution yet.
    Another strange thing about airplay is that sometimes it does show up in itunes but you can't connect cause of unkown fault (-150006), sometimes it can't connect but it's trying to for a long time and the connection window just dissapears and you can try again but still nothing is going to change and in very rare occassions it works?
    We've tried a lot of things: resetting wi-fi router, resetting and restarting apple tv, turning on and off wi-fi on macbook, restarting itunes or macbook, we've bought an ethernet cable but still that doesn't make any difference, I've turned firewall off but that didn't work either.
    My dad went to a local authorised Apple reseller and the only thing they said is that it should work so that didn't help us much.
    So what can we do about this?

    Also, the solution of using an Ethernet cable is no good for me.  I live in a shared house, the router is in the landlords room.  So I can log into the router and make changes, I have also tried rebooting, and resetting the router.  But can not permanently use an ethernet cable.
    Anyway, my friend is using his (unupgraded) apple tv just fine in the next room.
    As I mentioned, it was just fine the way the router is now BEFORE the firmware upgrade.  Straight after it connects for a few minutes at most.  And in the last few hours it has refused to connect at all

  • HT1923 The sync function on my iPod Touch 3rd generation doesn't work properly.  My OS is up to date, but some of my podcasts won't transfer onto the iPod, and it won't delete ones I've already listened to.

    The sync function on my 3rd gen iPod Touch doesn't work properly.  It won't sync all the podcasts I've downloaded, and it won't delete ones I've listened to and deleted on iTunes.

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • What can I do if my CD or DVD drive doesn't work properly in Windows 8?

    QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
    AnswerNote: For help with this issue in Windows 7, please see this article.
    To get your CD or DVD drive working correctly, try these suggestions in the order listed.
    Reinstall the Driver
    Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
    Power Cycle
    Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
    Ensure the laptop is turned off.
    Unplug the laptop's AC power cable.
    Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
    Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
    Hold down the power button for thirty seconds.
    Reattach the battery if removed.
    Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
    Connect the other end of the AC adaptor to your computer.
    Start the computer and test the drive
    Microsoft Fix-it
    Your computer may exhibit one or more of the following symptoms:
    Your CD or DVD drive no longer appears in Windows
    Your CD or DVD drive does not read or write and is shown as disabled
    The media in your CD or DVD drive cannot be read
    The media cannot be written to a CD or DVD inserted into the drive
    You receive an error message about your CD or DVD drive
    If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
    System Restore
    Try using System Restore to restore to the most restore point from before the problem arose.
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    System Recovery
    If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
    For more information on performing a recovery, see the following article:
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    Contact Customer Support
    If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

    See this Microsoft article - http://support.microsoft.com/kb/314060/en-us  For ways to fix manually
    and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
    (these are from the Microsoft article)
    Resolution 2: Use the CD/DVD Fix it troubleshooter
    To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8   
    The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                    This troubleshooter fixes many problems. learn more
    Run now
    Windows 7, Windows Vista and Windows XP
    The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                    This troubleshooter fixes many problems. learn more
    Run now
    If your problem is not solved, try the next
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Hp laserjet P1006 doesn't work properly

    my Hp laserjet P1006 doesn't work properly on my windows 7(64-bit) and whenever I try to print a page the orange light just flashes and then the green light flashes and then it doesn't print at all.I've tryed everyway including reinstalling the software or even turning it off and then turning it on.Pleaseeeee.............help!!!!!!!!!!!

    Hello
    I understand you are no longer able to print with the P1006 on Win8.1.
    Did you uninstall the P1006 first?
    If not uninstall and reinstall the printer software again.
    Both drivers are the same if you look at the version on the website and should still work with the Win8.1.
    If you need more assistance just let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Lightroom 5: start button in the presentation module doesn't work properly

    Hi. I purchased LR 5 last week but the start button in the presentation mudule doesn't work properly. I get a black screen and nothing happens. I have to press the esc button several times to return to LR.Can you help me please
    Regards Eugene

    start button in the presentation mudule
    Can you clarify?
    There is no start button nor a presentation module.
    Do you mean the Play button in the Slideshow module?
    Which operating system?

Maybe you are looking for