Timeline for event starts

Any idea for a lingo code that checks the time (for example every 15 sec.) in the background ?  I use a list with numbers ( 1448:1; 1524:4;) meaning 14:48 h start prog 1, 15:24 h start prog 5 ect.  to compare to the system time.  not a big problem if i use a slideshow with 5 sec. duration. but on Mpg movies comparsion stops the movie/slow down. and if the movie loops it will not even check the routine!

try
nexttostart = timeout.new(.......)  see manual
Wolf

Similar Messages

  • I want to create a timeline for events which have occurred in my past life

    IT would be better if I could run several at a time for example Work Life, Personal life, health events etc
    I would like to tie documents, pictures etc to them
    I would like to be able to present the timeline in either printed or projected form or both
    it is to help explain a sequence of events over a ten year period
    i do not mind paying but as this is not a commercial enterprise i do not want to pay to much

    Try going to the App Store, and search on things like timeline, other teams that come to mind.  A quick look turned up several programs that track timelines, calendar timelines, for various prices.  The default Calendar program is not designed to do this.
    You can use other programs, also, such as Keynote to create graphics of events.

  • Scroll/swipe events controlling timeline for DPS

    Hi,
    Actually I am trying to controlling my timeline with events that I can use in my ipad. I export html from to Edge Animate, and I insert in Indesign to digital publishes (DPS).
    I found this example:
    https://www.dropbox.com/s/2mvc6l667nq79av/parallax_edge_demo.zip
    I would like to know if there is a way to make the scroll smooth. I mean, if you give a little push with your finger and it just scrolls by itself and goes slower at the stop (don´t stop suddenly like in the example). Is this possible?
    thank´s,
    Rubén Afonso

    Glad it worked for you, Graeme.
    Note that I've updated both Example and Source links, with a constraint so that if you swipe up, the "timelinePos" variable is constrained to 0, rather than becoming negative (line 25 @ Stage.compositionReady). You might want to re-download my example.
    Adding ease to the end of the swipe/timeline scrub is possible in Edge, but it would be a bit unwieldy. Here's the psuedo-code I'd start with:
    1) create a variable, "onTouchEndEasePosition", which you'll use to add/subtract from the "timelinePos" value
    2) run a setInterval on touchend (be sure to clear it when your value goes down to 0, or a touchstart fires!!)
    3) on each tick of that setInterval, decrease (or increase- depending on swipe direction) the "onTouchEndEasePosition" value, and position your playhead on the timeline based on the "onTouchEndEasePosition" value.
    Another thing you can try, and this would prob be cleaner than using setInterval, would be to leverage the powerful GSAP library to set the "onTouchEndPosition" variable. On touchend, you could create a Tween with the ease of you choice, and on "tick" of that Tween, increase/decrease your "onTouchEndEasePosition" variable, and position your playhead on the timeline based on that value. See FAQ #15 at bottom for how to listen to the "tick" of a Tween: http://www.greensock.com/get-started-js/
    The biggest challenge, I think is to figure out how fast the user was scrolling before lifting their finger. You would need this in order to get the "after scroll" to feel right.
    There are a lot of really good jQuery touch scroll plugins, but since you're not actually scrolling content, not sure if they apply to your project. Here is a list of good scroll plugins, but they operate on an actual scroll, so you'd have to make your content scrollable:
    http://jquer.in/category/jquery-plugins-for-awesome-scrolling-and-scrollbars-on-websites/

  • Is there a way to enter an event time in Calendar as a reminder for me and NOT have Calendar erase it in the info as it reads it into the event start and end times?

    Calendar can recognize and derive event start and end times from the text description entered.  However, when it seizes on a time (start and/or end) and automatically enters it as the start and/or end time, it also (sigh) deletes the time from the text.  I enter the times as reminders for me, how can one prevent them from being deleted by Calendar??

    I am having the same darn problem. I really dislike this auto feature in Calendar.
    Can anyone help us please?

  • The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    Hi,
    Can any one help me on the below issue ?
    while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
    explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
    progress, after  2 or 3 min  some of  test cases getting passed and some are failed.
    Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3  links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
    Error Message :
    The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
    installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    (mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path 
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
    the message resource is present but the message is not found in the string/message table
    Thanks
    Suresh
    Suresh

    Hi,
    Can any one help me on the below issue ?
    while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
    explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
    progress, after  2 or 3 min  some of  test cases getting passed and some are failed.
    Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3  links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
    Error Message :
    The description for Event ID 0
    from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    (mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
    Could not find a part of the path 
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
    temporaryDirectory)
    the message resource is present but the message is not found in the string/message table
    We are using VS 2013 (premium) and IE 10.0,  scripts have been created on the same versions. It is working fine  on
    developers command prompt but the same tests are getting failed in lab center test agent machine
    test agent log:
    QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
    QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
    QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
    QTAgentService.exe, AgentPro
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    QTAgentService.exe, AgentService: Connection to controller is up.
    Thanks
    Suresh

  • Process chain Error: This AND process is not waiting for event RSPROCESS

    Hi All,
    I am facing an error in the process chain in PRD.
    Error message: This AND process is not waiting for event RSPROCESS.
    We had a process chain which had two sub chains which run parallel and below of this we had AND process type and below of the AND process we had 4 more jobs.
    Once the two subchains got successfully loaded, the and process should turn to green and further 4 jobs should start.
    It is a daily load , it worked fine from past years,but suddenly the AND processtype is getting failed.The thing is in the two subchains if one got completed, the AND process process is not waiting for 2nd subchain to get completed.The AND process is turning to RED (status: cancelled) . I tried to repeat the AND process once after above 2 subchains loaded, but it didnt worked.
    And i removed the existing AND process and created a new one and placed it in same place and activated and schedules again.but still it is getting failed with same error.
    Thanks in advance,
    Sai Chand.S

    Hi,
    If you did any transports related to that metachain we face similar kind of issues.
    not only the AND process , we need to remove all the process before executing the AND process and create it again.
    It helps you, you said your in production So you should take the proper approvals and do it.
    Regards,
    Yerrabelli.

  • How can I remove default alarm for events in iCal on devices ios?

    Whenever I add an event to my iCal calendar in Mounain Lion it will automatically add one default alert only on my iphone and ipad. These default alarms are not displayed on my macbook or icloud.com
    Default alarms are disabled in macbook, icloud.com, and my ios devices.
    How can I remove default alarm for events in iCal on devices ios?
    Thanks and sorry for my english.
    MacBook Pro, Mac OS X 10.8

    OK, so I have had this issue for the past several months. I think it all started when I upgraded to ML from SL and migrated my calendars and contacts to iCloud. That was a couple months ago. But now I am running 10.8.2, and about two weeks ago I upgraded my iOS devices to 6.0.1.
    I don't seem to be having any issues with events that I create now, but all those old events that were migrated to iCloud a couple months ago, many of those sound alerts on the iOS devices even though there was no alert defined when the event was originally created. I have always had alerts off by default both in iCal and on the iOS devices.
    So here's the question: is there a way to go through and disable all these spurious event alerts? I've been disabling them as the event reminders come up, but it's irritating. It would be nice if there was a way to turn them off all in one shot somehow.

  • Which method is used for event creation

    Dear All,
    My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.  
    I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for  BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
    As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
    Can some one guide me, how can I found that which method is used for event creation in different pur org?
    How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation. 
    For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module'  for all the workflow - WS92000030, WS92000021 etc.
    Thanks in

    Hi Sahu,
    I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
    Istead what i think is, they might have given the Event Condition for each workflow.
    In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
    Please check this.
    Regards,
    Gautham

  • Error in Workflow wait for event node

    Hello Experts,
    I am working on one QM notification. I shall explain the scenario first:
    1) User will take the usage decision on inspection lot in QA11. When user will take decision and save inspection lot BUS2045 event USAGEDECISIONMADE will be triggered and initiate my workflow here.
    2) After workflow initiation system will create notification and send to approver, but here i have wait step in my workflow for BUS2078 - Created (Notification).
    wait for Event step
    BO: BUS2078
    EV: CREATED
    I am posting error below:
    Error when starting work item 000000294361
    Error when processing node '0000000060' (ParForEach index 000000)
    Error when creating a component of type 'Wait Step'
    Error when creating an event item
    Error within method CL_SWF_RUN_WIM_EVENT->_CREATE_WORKITEM_CONTAINER
    Error within method CL_SWF_RUN_WIM_EVENT->_GET_INIT_WORKITEM_CONTAINER
    Workflow 000000294361 wait step 0000000060: No valid object ID in container element 'Notification
    Node 60 - wait for event step.
    Re.,
    Guri

    Hi,
    Based on your description what I felt is you are making use  of a wait step in which you have choose to wait till BUS2078 event CREATED is occured ... right.. Now can you please clear me that where and how this event will triggered.
    or is it some thign like you are making use of event creator step and in this case, When ever you are making use of the eventcreator  step and a BOR object inside it make sure that specific BOR object is already instatitaed in the workflow container , if it is instantiated then only it will try to identify the instance  or the BOR and it will try to rasie the event.
    Regards
    Pavan

  • Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

    Hi All
    I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Exception occurred - Error when starting work item 000000007031
    PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
    CREATE - Error when creating a component of type 'Step'
    CREATE_WIM_HANDLE - Error when creating a work item
    CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
    Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
    Points to be noted:
    1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
    2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
    Appreciate your valuable suggestions.
    Thanks
    Ragav

    Hi Ragav
    did you try to debug this? maybe something is missing in config of P&F?
    Since you are on 605, the following note would be there in your system....use it to debug:
    1422496 - Debugging background workflow tasks in HCM P&F
    This will help you find the root cause.
    regards,
    modak

  • Message being sent and wait for event - BPM help.

    Hi Experts,
    I am doing BPM interface, in that i am receiving two files. Between these two files, i have set the coorelation in the BPM and included in the BPM's receive step1 and receive step2. After execution, when i look into the sxmb_moni, message status shows processed successfully, but when i look the Process engine status, it shows Message Being Sent and when i look into the BPM monitoring it shows message wait for event in the coorelation object.
    I have gone through the following forum :
    Link:[https://forums.sdn.sap.com/click.jspa?searchID=27600139&messageID=7561954]
    but everything is green and messages are set to Message being sent status.
    Experts kindly advise me.
    Regards
    Mani.

    Hi Abhishek,
    Here i have given my BPM design,
    Start
    Fork - two branches
    Branch1 - Receive File1
    Branch2 - Receive File2
    Transformation
    Send
    End.
    In coorelatin editor, i have specified container,involved messages and properties clearly.
    I have gone through the SAP basis contents as per your previous reply.
    One thing is, i have used the same design for my other interface, it is going through, but specifically for this interface i am getting error. If you could send me your mail, i will send you the exact screen shots, so that you can advise me.
    Pls i need to complete this in a short period, kindly help me to come out.
    Regards
    Mani..
    Edited by: mani_sg on Jun 18, 2009 10:21 AM

  • Problem with wait for event

    Hi everyone,
    I'm using wait for event step in my workflow of a custom event called zevent2.
    I'm not using the event as a start event of the workflow.The event is getting triggered at a certain point of the workflow programmatically.
    So for that what should be the entry in SWE2? I've maintained the following entry for zevent2 at swe2 tcode.
    Object type: BUS2000126
    Event: ZEVENT2
    Receiver type:
    Receiver function module: SWW_WI_CREATE_VIA_EVENT_IBF
    In swel I'm finding out that event got triggerd but it is giving error "No Receiver Entered".
    And the workflow is getting stuck at 'wait for step event'.
    So can anybody please tell me what is the step am I missing? is the swe2 correct?
    Thanks & Regards,
    Anirban

    HI....
    you have to specify RECIEVER TYPE without which you will be getting this error
    goto SWE2 and give the value and your problem will be done
    regards
    Edited by: Mohit Kumar on Feb 20, 2009 10:50 AM

  • NiDCPower Wait For Event

    Hello,
    I am using the PXIe-4139 SMU to source a current sequence that starts when a trigger is received and takes about 40 seconds to complete.
    After the niDCPower Initiate VI I have inserted the niDCPower Wait For Event VI with a timeout set to 300 seconds to allow for enough time to receive the trigger and complete the sequence. This VI waits for the Sequence Engine Done Event.
    Now this works fine, however, when the user wishes to stop the programm for whatever reasons, they have to wait the full 300 seconds until the Wait For Event VI produces a timeout error and stops the programm. This is rather inconvenient. How can I change the programm so that the user can stop it even when the Wait For Event VI hasn't reached its timeout?
    I tried this:
    But this doesn't work. For some reason, I get a timeout error with code -200474 but the boolean operator returns FALSE.
    Any other ideas?

    If there an output on the wait for event VI that flags a timeout? If so, set the timeout short (like 100 msec) and wait for 3000 timeouts before continuing on.
    Oh, and use an event structure. Timeout event (timeout=0) checks the wait for event, value change event for button breaks out of loop.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Wait for Event not being picked up by workflow

    Hi,
    We have a purchase order workflow that has a parallel branch with a wait for event of 'Released' on it. The theory is that if a PO is released the workflow will finish. We have a situation where POs are created then released straight away by an idoc. In the event log we can see the release step created event and it correctly starts the workflow however the released event follows at exactly the same time and the workflow does not seem to notice this so it sends a released PO to a user to be released. I hope this makes sense. Can anyone think of a reason why this might be happening? Does it need a slight delay between the two events?  In SWEINST the linkage is active and when I look at the entry for one of these POs it tales me to the correct workflow.
    Thanks
    Rob

    Hi,
    You could possibly create a check function module for the event. In the check function module you check some specific variable (if there is something you can use) - for example if the event was created by a certain user or if the PO is a certain type(?). Then if your condition is fulfilled, you raise an exception and no event will be triggered => no workflow.
    This is just one possible solution.
    Regards,
    Karri

  • Wait for Event FIPP - Completed Logically Deleted

    Hi WF Experts,
    We have a WF for Release of payments.
    It has 1 Fork with 2 parallel branches (both necessary).
    1 Branch has the approval process for Amount release and the other branch calling the Account assignment approval Subworkflow.
    The approval process branch has the until loop with increment counter and it picks the agents within the loop until a loop condition is reached and thereby till no more approvals required.
    The other branch, before calling the subworkflow, it checks a WAIT FOR EVENT FIPP->COMPLETED with container element FIPPID.
    Both these branches needs to be completed so that the forks gets ended and the wf comes out of the fork.
    The approval process branch is working perfectly. But in the other branch the WAIT FOR EVENT FIPP->COMPLETED  gets logically deleted and thereby, this branch does not go firther to start the Account assignment approval Subworkflow. This way the Fork with the 2 necessary branches does not end, and thereby, the WF stops here and could not go further to set release indicators (Which is a backgorund task).This will confirm the end of WF process.
    When I pass the WI ID for this Wait event in the SWIA, it shows the status as CANCELLED.
    The WF User log as a whole shows the status as COMPLETED as all the approvers has approved the release.
    Why is the Wait for Event gets logically deleted ?Please advice.
    Edited by: Sameer Anwar on Jun 12, 2011 9:17 AM
    Edited by: Sameer Anwar on Jun 12, 2011 9:21 AM

    Dear Experts,
    Any update on this . I am unable to sort this out why the Workflow is getting stopped.
    -Anwar

Maybe you are looking for