Timeline frequently stutters during playback after upgrade to Premiere Pro CC 2014?

I recently upgrade to Premiere Pro CC 2014 and I have noticed that my timeline playback frequently stutters on playback if I jump around in the timeline. Other times if I just hit play the sequence will start playing back fine but then it will start stuttering after a few shots? This never happened before. I'am playing back C100 AVCHD media using create sequence from clip option for my timeline settings. I recently upgraded to Yosemite OS on my mac pro and I have not noticed any improvement. Any help would be appreciated.
Thanks
Harry
My specs: Mac Pro 2009
Processor 2 x 2.26 GHz Quad-Core Intel Xeon
Memory 32 GB 1066 MHz DDR3 ECC
Graphics NVIDIA GeForce GTX 680 2048 MB
Startup disk SSD

Thanks for the info Kevin. However on doing more probing into my problem I
realized the problem was being cause by my Kona LHi card. The Kona card has
started to whining sound, so I disconnected the card. When I went back in
Premiere Pro everything in the time line played back really fast with no
stuttering. The response time in the timeline is very fast. And I can jump
around the timeline with no problem. I will be getting my Kona Card looked
at by AJA, I'm sure there is a problem with card.
Thanks
Harry
On Sat, Nov 8, 2014 at 1:31 PM, Kevin Monahan <[email protected]>

Similar Messages

After upgrading to Premiere Pro CC 2014, I can't change the render preview location

Ever since I downloaded Premiere Pro CC 2014, I cannot re-route my render preview files. I have two internal hard drives and I need the files to go to my secondary one. With CC, it did this just fine, but since I've upgraded to 2014, it will not do it. I've set it the same way I did before in Preferences/Media, then set the Media Cache Files and Media Cache Database to the new hard drive. It's eating all my hard drive space and I cannot render or export a large sequence. Is there a trick to this I'm missing that has changed?

Thanks Neil! I'm actually wondering how to change where the preview files go. I've attached two screen grabs. Right now my media cache is going to my SATA drive (my smaller of my two internal hard drives and the drive where Premiere Pro is located.) I want to re-route my render files to go to my Macintosh HD drive which is much larger and gives me more breathing room. I could do that before but since I've upgraded to 2014, even though I have it set in preferences, it STILL goes to my SATA drive. So annoying! I'm wondering if I'm doing something wrong or if it's a bug. I'm still running Mountain Lion (getting ready to finally upgrade, I've just been needing to backup my computer), could this be the reason? Any ideas? Thanks so much for the help!

Cancelling photography plan after upgrading existing Premiere Pro Annual plan to Complete Annual Plan

I was subscribed to a Single App Plan (Premiere Pro Annual paid monthly) and the Photography Plan (Annual paid monthly). I recently upgraded the Single App Plan to the Complete Plan (also Annual paid monthly) but I can still see the Photography Plan in my account. How do I cancel it without having to pay 50% for the remaining time since I've been subscribed for more than a month now?
Thanks
James

You are correct, this is a case of duplicate purchase as you can only activate the CC two times regardless of the number of CC purchased under the same Email ID.
Please contact Adobe Support:
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN
Current Plan:
Creative Cloud Photography plan (one-year)
Account Activated:
Oct 25, 2014
The above plan will be cancelled as well as the charge that you have been charged till now will be refunded too. Please let us know in case of any issue.
Regards
Rajshree

Red Giant Trapcode plugins no longer work after updating to Premiere Pro CC 2014.1 (v8.1)

I'm not sure why but after updating Premiere Pro CC to 2014.1 none of my previously installed Trapcode plugins work. I tried uninstalling Trapcode and then re-installing the latest Trapcode update (12.1.6) but it didn't fix the problem. I'm also running Windows 8.1.
I checked the plugin loading log file (\AppData\Roaming\Adobe\Premiere Pro\8.0\Plugin Loading.log) and noticed all the Trapcode plugins had the message "The plugin is marked as Ignore, so it will not be loaded."
So to fix it, I had to manually modify the registry and change "Ignore"=dword:00000001 to "Ignore"=dword:00000000 for most instances of my Red Giant plugins. Everything works now.
Here's all the ones I had to modify:
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\3DStroke.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\HairLines.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\LightFactoryLERender-64.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\LightFactorySpectactularRender-64.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RadiumGlow.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RadiumGlowEdge.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RadiumGlowLite.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RGCornerPin.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RGReflection.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RGSGrowBounds.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\RGShadow.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Screen Text.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Shine.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Smooth Tiler.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Starglow.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Text Grid.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Text Hacker.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Text Matrix.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\Text Spiral.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\ToonIt Blacklight Edges.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\ToonIt Goth.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\ToonIt Heat Vision.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\ToonIt Outlines Only.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\ToonIt Roto Toon.aex]
"Ignore"=dword:00000000
[HKEY_CURRENT_USER\Software\Adobe\Premiere Pro\8.0\PluginCache.64\en_US\TypeOn.aex]
"Ignore"=dword:00000000
-Pete

First ... have you checked that these are all updated to work with the CC versions? I'd check with the makers of each plugin, the software has MANY differences.
Next ... if say you removed all but one, do any of them work? It might be worthwhile to remove them from the folder, then add one by one until you find one that is crashing things. That would at least get you part way forward.
And ... you might list which ones you have, in what versions. Folks around here might be able to help just seeing that.
Neil

Newbie question re: upgrading to Premiere Pro CC 2014.1

Apologies in advance for having to ask such a basic question... I have recently upgraded my edit suites to PP CC 7.2.1 (4) from Apple FCP. The suite is connected to the Internet, yet when I open the Adobe Application Manager, and open the Premiere Pro drop down it doesn't mention 2014.1 ?, How/where do I upgrade?
Thanks in advance

You may need to "force" the updater by...
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

My video gets pixilated after importing in Premiere pro cc 2014. I've try to change settings but nothing happens.

My video gets pixilated (specifically the text on the video) after I import it in premiere. I don't think it's because of my editing because when i'm previewing a video after importing it the video is already downgraded and the text are so pixilated. I hope someone could help me.
Thank you in advance.
God bless

Here is the sample sir. I'm editing one of our church event and this is what i encounter.
Here is the info of the video as i click the properties of it in Pr:
Type: QuickTime Movie
File Size: 18.5 GB
Image Size: 720 x 486
Frame Rate: 29.97
Source Audio Format: 48000 Hz - 24 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:59:46:29
Pixel Aspect Ratio: 0.9091
Video:
There are 107609 frames with a duration of 1/29.97th.
Video track 1:
Duration is 0:59:46:29
Average frame rate is 29.98 fps
Video track 1 contains 2 type(s) of video data:
Video data block #1:
Frame Size = 720 x 486
Compressor = Apple ProRes 422
Quality = Most (5.00)
Video data block #2:
Frame Size = 720 x 486
Compressor = Apple ProRes 422
Quality = Most (5.00)

HEP!!!!! The video and the audio not sync after export from Premiere Pro CC 2014

when i play in premiere it ok but when i export it become not sync whith the audio

i was do a test with some player ,when i play from all this player it result is not the same:
KMPlayer :Audio not sync with video
itune :audio not sync with video and very lag
QuickTime :Can't play anymore
Windows Media Player : Very good no lag and the audio perfectly sync with video
put in Audition CC2014 (Multitrack) :Audio sync with video but very lag
put in Premiere Pro CC2014 (create new project and put the video in) :very lag but audio was sync
Nero Kwik Media :Very good no lag and the audio perfectly sync with video

Playback avchd file in premiere pro cc 2014

i have a problem when i use the letters j and l in the keyboard to fast forward and rewind
when i click the j letter to fast rewind the video almost did not move when i click again j letter
the video blay rewind but not smoothe
when i press four times the l letter to fast forward the video blay forward but not smoothe
when i applay reverse speed i have to do rinder to see the result
my camera sony nex ea50
my pc
intel xeon cpu e5-2680 v3 2.5ghz 12 core
32 gb ram
240gb ssd +3t-sata
nvidia geforce titan black 6g
windows 7 64bit pro

You likely won't get the same bitrate as an option, but that's to be expected because of the nature of the codec. DNxHD generally requires more bits than H.264, but that's part of the reason it edits so much better than H.264. So...choose 85. If the quality of the converted file is acceptable, go with that. If not, choose a higher bitrate option.
And again, if you need more hard drive space to accommodate this work flow, get it. Don't let that alone stop you from making things better.

Stuttering during Playback of .wav files

I get stuttering during Playback of .wav files in my PC music library. I am using X-Fi Elite Pro. This doesn't do it all of the time, only occasionally. @97.22.92.33

Mathew Hennessy wrote:
How do I make it play a WAV playlist continuously?
Make sure that all the little boxes (in the column at the left) have a check-mark in them.

Playback has frozen in Premiere Pro CS6, it started when I added some after effects compositions to

Playback has frozen in Premiere Pro CS6. I am running a 1080p timeline and it appeared to start when I added some after effects renders to my timeline. The playback head still runs through the timeline and audio plays normally but the video completely stops and cannot be viewed in real time.
I have plenty of memory and a very good graphics card running 64Bit Windows 7.

Red, yellow, and green render bars and what they mean
http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html

After installing Adobe Premiere Pro product CS6 in the program is not active PlayBack

After installing Adobe Premiere Pro product CS6 in the program is not active
PlayBack button setting when creating sequence.
Windows 7 64-bit. Intel Xeon 2, RAM 12 MB. Mxo2

Hi,
Thanks for posting that screenshot. It appears that you have opened your Sequence Settings for a DV-NTSC sequence and have made a circle around the "Edit Settings" button.
Since you chose to create a DV sequence, you cannot change those settings.
Do you have DV NTSC clips? If so, these are the correct settings.
If you do not have DV NTSC clips, do not be concerned. Just create the sequence.
Once you drag a non-DV clip into the DV sequence, it's OK.
You have the option of changing the Sequence Settings to match those of your clip in a new dialog box.
Click "Change Sequence Settings" in the dialog box.
I hope that helps.
Thanks,
Kevin

After upgrading my MacBook Pro, my 3rd generation i-pad will not charge. It says the accessory (the charger) may not be supported.

After upgrading my MacBook Pro, my 3rd generation i-pad will not charge. The device says, "this accessory (the charger) may not be supported. My i-phone 5 charged just fine. Thanks.

iPad: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
Also, this is the MacPro desktop forum. I requested your post be moved to the MacBook Pro forum

Unable to export Quicktime after upgrade from Premiere 7.0 to 8.0 (2014) error "incompatible video codec in preset"

In the previous version of Premiere Pro (downloaded two months ago) I was able to export QuickTime files with preset HD 720p H.264. It was very easy to do this in the previous version.
Upgraded to Premiere Pro 8.0 (2014), no when I attempt to export the same project with the same settings I see error message "incompatible video codec found in the preset. present load failed"
When I select Quicktime, the default preset appears as NTSC DV Widescreen 24p. Attempted to export with this setting, result is a file that plays audio but no video.
System is Windows, tried two different computers, including one with Windows 8, same result. Tried Media Encoder, same result.
I searched the forums for an answer, the new features page lists these presets as available however they are not working for me. Nothing else was changed on the computer, only the upgrade to Premiere 8.0 (2014)
How can I export Quicktime files in the new Premiere Pro?

Tech support helped me solve the issue - uninstall QuickTime and reinstall the newer version of QuickTime

Can't Move Audio Clips in Timeline After Expanding to View Waveforms (Premiere Pro CC 2014.2)

So, this seems to be a bit of a weird one, and I'd be pretty stoked if it ended up being something silly that I'm doing wrong, but I can't for the life of me figure out what that might be.
As the title suggests, I can't use the mouse to move some audio clips in a timeline once I expand the track to view the waveforms. This appears to only happen with independent audio clips (WAV. AIFF, MP3, etc), and not with clips attached to video. Also, it's worth noting that I don't have track keyframes turned on. I was hoping that was it, but it wasn't.
So, what happens is this:
1) I drag an audio clip down to the timeline (I can drag it onto an existing track, or drag to the bottom of the sequence and create a new track. Neither option seems to get a different result.).
2) So long as the track isn't expanded and the waveform isn't visible, I can move the clip left, right, or up and down to a different track.
3) As soon as I expand the track to view the waveform this functionality goes out the window. When this issue happens I can use the keyboard to nudge left and right, but that's about all the movement I have.
4) It's almost as though the track becomes corrupt. The lanes for the track don't redraw properly, and the track is pretty much unusable. I can't put anything into it, and I can't take anything out. All I can do is delete the track and start again.
Complicating issues is that this doesn't always happen, but instead is one of those "vast majority of the time" issues. I can't see any rhyme or reason for why it works or doesn't. I seem to do the exact same thing, but occasionally get different results. It doesn't matter what type of file I'm using (WAV, AIFF, etc), and this only happens with independent audio clips.
Once again, I don't have track keyframing turned on when this happens. Believe me, I wish that was it.
I have already filed a couple of bug reports about this over the last month or so, but haven't heard anything yet. I was wondering if anyone else was having the same issue, and if so, whether they had any workarounds.
Mandatory system info:
Windows 7 Professional SP1 (64-Bit)
Intel i7-3820
32GB RAM
Nvidia GTX 980 (350.12)
Premiere Pro CC 2014.2

Update:
I was just looking to post a screenshot of the timeline when I discovered something interesting. As soon as I use the vertical scroll bar to the right of the sequence, the tracks start to work again. Close off the waveform and the clip goes haywire. Move the scroll bar a tiny bit (or a lot), and suddenly the clip starts working.
Pretty bizarre.
The good news is that for the time being that could be a workaround, though it would be great for this to not happen at all.

Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
Specs;
Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
Processor - Intel Core i7 Processor - i7-3820 LGA 2011
Processor fan - Intel Thermal Solution RTS2011 AC
RAM - Ballistix by Crucial - 2x 8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
Power Supply - Cooler Master Extreme Power Plus 700W
Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
I have, as far as software goes...
Windows 7 64-bit SP1
Adobe Creative Suite 5, student version or what have you.
- I do have several plugins installed as well for After Effects only.
Autodesk 3ds Max 2012
-I have several maxscripts as well as a couple plugins for 3ds Max.
UDK 2-2012 & 3-2012
NVIDIA PhysX Lab 1.1
NVIDIA Texture Tools 2
NVIDIA plugin for Photoshop
xNormal
ConTEXT
UnCodeX
Quicktime
AVG Free
Malwarebytes
7-Zip
Java
Sculptris
As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
"Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

Timeline frequently stutters during playback after upgrade to Premiere Pro CC 2014?

Similar Messages

Maybe you are looking for