Timeline has over 2 minutes of black added to projects?

Hi, Ive been a FCP user for 5 year and all went well but
a few months ago i started getting this weird thing where when i would export out
my videos would have 1-5 minutes of black at the end of them.
I have un and re-installed the program, i have tried to set in and outpoints, i have highlighted
what i wanted to export out, and have looked over all the settings many times but i
still cannot find a solution. Any help with this would be amazing,
even my professors in college couldnt figure this out...

I have un and re-installed the program, <
Accomplishes absolutely nothing, total waste of time.
It wasnt a waste of time, ive tried everything, so why not try this? It could have been
a preference or something like that, you cant knock it until you try it is my thought process.
First, why are you exporting at all?
Why export?? Isnt that the way to get your video into the format you want? Theres other
ways to get footage from FInal cut into a viewable form on the computer? Just wondering
as exporting is the only way ive finalized my projects in FCP.
Second, what format are you exporting to?
I was doing Apple Prores 422 HQ, but ive tried may other formats and nothing really changes.
Third, what's yoru orignal format?
Ive used many different types from, 7ds to red footage. For this, i used 60d
footage, converted it to apple prores 422 HQ and put it in my project. I did it not
for the particular project but to figure out this problem once and for all.
Fourth, what format is your sequence set to?
Sequence is set to Apple Prores422 HQ, but ive also tried it with other
sequence formats as well.
Fifth, what's your export process?
Well before when finishing the edit, i would either highlight what i wanted to export or i added in and out points.
I then go to export and do Quicktime movie, set up the settings, and go ahead with it. IVe also done Quicktime conversion export and the same thing happens.
Space on the timeline will not, generally, export since it has no content and, therefore, does not really exist.
Yeah thats true, my past professor kept asking if maybe there was a tiny clip in the gap that i was missing or
said that maybe there was something i couldnt see. At this point those things are wrong but he was pretty confused too.
I do see that the gap i get on my timeline are longer than usual. When the sequence ends there are a few seconds afterwards
but not more than a minute or so, at least from what i can remember.

Similar Messages

Thre Minutes of Black added to the end of my export from Final Cut Pro X

Title says it all. I'm editing a video that is 40 minutes long. When I export it, everything plays fine but it adds 3 minutes of black to the end of the clip. The only thing I've done differently is that I am using a beta of PluralEyes to sync all the footage so I imported an XML file to start.
Has anyone else experienced this?

I am experiencing this exact same issue, both with sharing to DVD and to YouTube. I think it may have something to do with making duplicate copies of a project in the project library, and then further editing the project down in time. It seems the last version of the project maintains the original projects duration. This has happened to me twice on different projects - frustrating. I am also using the latest plural eyes beta for syncing 3 cameras and an additional audio source. When I "show all" of the project, only the edited project shows in the timeline like above. I have noticed that there is a time duration metric at the bottom of the project window, which includes the "added black" feature ;-)
Any solutions? This is happening on both my laptop and desktop systems.

Apple IMac 27 has a problem. Random black screen. Over 1 year without any fix

Apple IMac 27 has a problem.
Random black screen.
Over 1 year without any successful fix.
IMac 27 10.8.4 (12E55) - bought in 2010
3.06 GHz Intel Core 2 Duo
4GB 1067 Mhz RAM
Graphics ATI Radeon HD 4670 256 MB
The IMac computer screen goes black randomly but the machine still running beyond.
In order to go back to normal i need to awake the computer by hitting with the pointer a hot corner previously created " sleep mode" ( top left ).
..the black screen would come back after one second again..and then again and then again and then again..with different intervals..sometime 2 seconds after the other, sometime as soon as appears the user login screen.
I took the machine to an Apple Store two times over one year, they opened, cleaned it but they didn't replace anything has they could not understand what they real problem was. I was happy for that because they didn't try to make me spend money on something which was not going to solve my issue for sure.
Last time i kindly asked them to inspect everything meticulously, part by part, i left the machine with them for over 2 months. They couldn't understand why this was happening..after couple of weeks, 5 more machines came in with the same problem.
On some of them., upon request of the client they changed the graphic card but apparently this was not the fix, the problem come back again. Apparently changing the graphic card or the screen or else it didn't solve any problem to anyone. I'm almost thinking to "trough it out of the window"..we all spend money for this machines and i think we need to know if Apple is looking in to this or not.
Lately i tried to do an SMS RESET and PRAM RESET, it feels it got better a little but problem still coming back.
Also, all usb devices are disconnected and the problem still there
Below you will see a copy of the console report. I honestly don't understand much of it as i'm not a computer guy.
27/07/2013 11:03:39.837 WindowServer[119]: Created shield window 0xb3 for display 0x04272d40
27/07/2013 11:03:39.837 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001)
27/07/2013 11:03:39.906 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001)
27/07/2013 11:03:41.701 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001), lock state 3
27/07/2013 11:03:41.702 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:41.704 WindowServer[119]: Created shield window 0xb4 for display 0x003f003d
27/07/2013 11:03:41.704 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c79dc0(2002), shield 0x7fad92c34370(2001), lock state 3
27/07/2013 11:03:41.704 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:45.186 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[740]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:03:45.208 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
27/07/2013 11:03:52.117 WindowServer[119]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
27/07/2013 11:03:52.118 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:03:52.118 loginwindow[43]: CGSGetWindowTags: Invalid window 0xffffffff
27/07/2013 11:03:52.118 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:03:52.118 loginwindow[43]: CGSSetWindowTags: Invalid window 0xffffffff
27/07/2013 11:03:53.763 WindowServer[119]: Created shield window 0xba for display 0x04272d40
27/07/2013 11:03:53.763 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:03:53.838 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:03:53.880 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:03:53.880 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:53.883 WindowServer[119]: Created shield window 0xbb for display 0x003f003d
27/07/2013 11:03:53.883 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c87490(2002), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:03:53.883 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:55.209 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[742]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:03:55.252 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
27/07/2013 11:04:04.482 WindowServer[119]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
27/07/2013 11:04:04.482 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:04:04.483 loginwindow[43]: CGSGetWindowTags: Invalid window 0xffffffff
27/07/2013 11:04:04.483 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:04:04.483 loginwindow[43]: CGSSetWindowTags: Invalid window 0xffffffff
27/07/2013 11:04:04.704 WindowServer[119]: Created shield window 0xbf for display 0x04272d40
27/07/2013 11:04:04.726 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:04:04.795 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:04:05.245 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:04:05.246 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:04:05.253 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[744]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:04:05.249 WindowServer[119]: Created shield window 0xc0 for display 0x003f003d
27/07/2013 11:04:05.249 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92ebdb20(2002), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:04:05.249 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
I'm now thinking to try to take the machine to its original firmware and see if it still does it, does anyone have any sugestion?
I use a lot photoshop and other image software, this computer is essential for my work. For more then one year this issue caused me problems.
Luckly i have a Macbook Pro too and i managed to do some of my work there. At last I was thinking to buy an external screen and attach it to the Macbook pro in order to work on my big images. But who wants to spend money again!!!???? This is not a fixture, this is silly. I wish to have my IMAc working again.
The warranty it's obviously over and this problem happened right after the warranty was over...
I write this post because i'm so tired of this issue and online nothing can be found apart from posts from so many people that have the same problem and no fixture has been found.
The only fixture seams to be to buy a new computer... Ole'!!!..new money flowing in in the cashier!! forget it!!! i would rather change company if apple doesn't respond to this.
For over 10 years i have been a Apple owner..
When this problem appears it's like someone it's playing a joke at you...
Comments welcome..
Thanks

Hi, I've seem to have found out the source of the problem.
The issue is related to heat, and an iMac 27" gets hot pretty fast.
If I boot the iMac straight after first start into Windows 7 I seem to get a lit built-in display at all times. I can also boot OS X first and then into Windows 7 and the built-in screen get lit every time as long as the iMac isn't hot.
Strange thing is that the monitor connected to the display port gets lit every time. So I can only assume that the heat only interfere with output to the built-in LED screen.
So this iMac is going to an Apple premium reseller for service, and I'll tell you guys how it went.

Screen goes black, shut the lid for a few minutes, open the lid the turn on chime comes on and the screen comes back to life. The computer itself has continued to update just no screen. After a few minutes goes black again. Is logic board going bad?

Screen goes black, shut the lid for a few minutes, open the lid the turn on chime comes on and the screen comes back to life. The computer itself has continued to update just no screen. After a few minutes goes black again. Is logic board going bad or graphic card issue? Trying to decide if computer is worth repairing as it was made in 2007.

It does sound like you might have a faulty video connection. See if you can make a Genius Bar appointment at your local Apple Store.

When using my new nano 7 with nike , my music stops after the 30 minute voice alert even though I have set my run for over 30 minutes.It cancels/deletes my run/workout when the music stops.This has happened several times.How can I keep this from happening

When using my new nano 7 with nike+, my music stops after the 30 minute voice alert even though I have set my run/workout for over 30 minutes. It also cancels/deletes that run/workout. This has happened several times. How can I keep this from happening?

If possible I would arrange for a good service center to go over it. Hopefully they have a variety of parts in stock. They can test and verify all is working. The previous attempts are based on guesses by the person at the other end of the phone without diagnostic tests to assess the culprit. It is extremely unlikely for a webcam to fail & for it & a Mic to fail together should be an indicator to a good technician it is something else. EG Motherboard
Take it to a servicing dealer and wait for it.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

During restore my 3GS has been stuck in Apps loading for over 30 minutes now.. Any suggestions? Thanks

During restore my 3GS has been stuck in Apps loading for over 30 minutes now.. Any suggestions? Thanks ps.. I am holding off buying 4S until bugs worked out..

The problem is twenty three people leaving or twenty three thousand leaving has zero impact on a carrier with over 100 million customers. And they have the lowest churn rate. So if 10,000 or 20,000 or more churn out it means little to the carrier.
If you have a real lawyer he/she will advise you that you have no case. The device was not lost or stolen by the carrier, you were not eligible for a new device, and like any business who employs large numbers of poorly trained personnel who make low wages what was told to you is not in writing. So a verbal exchange does not hold up.
In fact in Verizon's customer agreement it has such a disclaimer against any verbal exchanges so if you have that agreement in writing, go get them.
The posting on public forums and places like Face Book, Linkin, Google+ or a personal web site can open you up to a lawsuit for Dilution of Trade Name, and other offences. However if you have proof then go for it.
Unfortunately that is how big business works today. A pity

New update has been installing for over 20 minutes

I downloaded the new OS system update, but it has been on the installing software update for over 20 minutes with a moving blue/white activity bar.
It is obviously hanging as installation on another machine in the house installed in a matter of minutes.
Am I screwed? This is a business machine and I can't afford a loss.
Doing this question through my ipad

If you have it backed up then I would kill it. If you don't and the update is still progressing then leave it alone. Most likely it's taking a while because the system you are updating was dysfunctional.
If you stop it and are still able to boot the computer then do the following:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
After this is completed download and install OS X Mountain Lion Update v10.8.4 (Combo).

Why is Final Cut Express adding 5 minutes of black to the end of my .dv export? I've marked it out, there are no additional clips at the end, it's doing this consistantly.

I'm using Final Cut Express 4.0 and when I export to .dv it adds 5 minutes of black to the end of my export. Any ideas on why this is happening? I have it marked out and there are no additional clips at the end that it's trying to capture.

According to previous posts in this forum, Apple does not support FCE with Lion, no less Mountain Lion. Nonetheless some people report no problems using FCE with Lion, depending upon upgrade protocols from Leopard etc. You list FEC 4.0, but FCE has an update to 4.01 free download from software update.

Bug in which Premiere does not allow publishing of videos to YouTube over 15 minutes.

When I try to publish a video to YouTube over 15 minutes I get this error: "The video duration exceeds the maximum duration supported by the destination. Please reduce the duration of video and try again."
Clearly YouTube's policies change over time - they allow videos much longer than this. Shockingly, Premiere does not offer any option to override this limit which obviously should not be set in stone. Please help.

SteveNewYork
No bug.
If you are using Premiere Elements 9, 10, 11, or 12, the upload to YouTube from within the project feature is stated and is
2.00 GB/15 minutes. So no bug. The YouTube dialog in the sharing section of 9, 10, 11, or 12 clearly state that. Now, if you have a version earlier than 9, you will run into limits of 2048.0 MB (aka 2 GB) and only 10 minutes. Those earlier versions were never updated to 15 minutes when Adobe extended the time for its YouTube feature from10 to 15 minutes going from version 8 to 9.
The YouTube limits for its upload at its site are governed by YouTube and not Adobe. In fact, I have been told that you can get extended upload times there with special accounts. I do not believe that YouTube has changed its basic time 15 minutes. Rather is offering "regular" 15 minutes as well as an extended time for those who request it. See link at the end of the next paragraph.
If you have a Premiere Elements Timeline content that is greater than 2.0 GB/15 minutes, then your ONLY choice is to export that Timeline content to a file saved to your computer hard drive and then upload that file to YouTube at the YouTube web site after you make whatever arrangements so that you do not end up with just 15 minutes there. If you have not seen the following already, the following is YouTube information found online on getting more time for larger uploads
https://support.google.com/youtube/answer/4523193?hl=en&rd=1
If you need help deciding on the settings for exporting a file saved to your hard drive for upload to YouTube at the YouTube web site, I would be glad to offer suggestions based on the properties of your Premiere Elements Timeline. More specific information will be offered once we know that information and what version of Premiere Elements you are using and on what computer operating system the program is running.
We are not Adobe. Just user to user. If you want to call this matter to Adobe's attention, you might be interested in filing an Adobe Feature/ Request Bug Report Form.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
ATR

Why does it take over 2 minutes to get a database connection from the DataSource?

Hello,
It is taking over 2 minutes for my application to get a connection from a registered DataSource in iAS 6.0 sp4 on Solaris. The proper results are returned it just takes 2 minutes to establish the connection. The DataSource is an Oracle 9i database. I have the 9i drivers in the classpath. I also have a registered datasource that is an Oracle 8 database and have no problems establishing a connection quickly to that database. As an aside I have setup this application on JBOSS and both datasource's return a connection very quickly. If anyone has any ideas about what might be going on please respond. This issue is holding up a production release.
Here is the code:
try {
log.debug("getting a new initial context");
ctx = new InitialContext();
ds = (DataSource) ctx.lookup(bundle.getString("IW_DATASOURCE"));
log.debug("after looking up datasource from initial context");
} catch (NamingException e) {
log.error(e);
throw new FinstarException
(bundle.getString("E-0001"));
try {
log.debug("about to get connection");
conn = ds.getConnection();
log.debug("after getting connection");
Produces this in the logs:
2002-05-29 08:55:12,859 DEBUG org.mitre.mii.project.finstar.FinancialSummary - about to get connection
2002-05-29 08:57:24,963 DEBUG org.mitre.mii.project.finstar.FinancialSummary - after getting connection
Here is the datasource registration file:
<ias-resource>
<resource>
<jndi-name>jdbc/pdc/IWDataSource</jndi-name>
<jdbc>
<database-url>jdbc:oracle:thin:@xxx.xxx.org:1521:acisdb</database-url>
<datasource>jdbc/pdc/IWDataSource</datasource>
<username>XXXXX</username>
<password>XXXXX</password>
<driver-type>OracleThinDriver</driver-type>
</jdbc>
</resource>
</ias-resource>

Have you tried to eliminate everything extraneous. In other words, do you experience the same delays with a simple Java program (no lookups, JNDI) that loads the drivermanager and creates a connection.
Do you have access to a traciong JVM or some program that captures run-time execution timing information? Even without the source, this will tell you the specific class::methos where time is spent so you can better determine where the delay is ocurring.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Over 12 minutes required to merely OPEN a .rpt file in Crystal Reports version 8.5

Post Author: Rob Kramar
CA Forum: General
Background: Our division has 3 networked, but geographically dispersed, plants; each plant runs MS SQL Server and Crystal Reports on local servers. A rather complex (version 8.5) Crystal Reports .rpt file (main report plus 12 subreports) exists and executes in one of our distant plants against a MS SQL Server database located there. I copied that .rpt file to my local server (CTXB) which has Crystal Reports 8.5 installed and which I can access via Citrix from my PC. I "repointed" that report to our local MS SQL Server database (located on a different server [CTXA] on my local network) [which uses the same database schema as the database in the other plant] by setting up a new ODBC driver, using the Convert Database Driver function, and using the Set Location function. I applied these changes to the main report and each of the subreports individually. I dropped all the links in Visual Linking in the main report and in each of the subreports and recreated each link. I did a Verify Database on the modified report (which appeared to check the main and each of the 12 subreports). I ran the report within Crystal Reports v8.5 and verified that the output is correct based on my local MS SQL Server data (on server CTXA). I saved the .rpt file on server CTXB and exited Crystal Reports v8.5. I did all the above work on server CTXB via Citrix from my local, networked PC.
Problem: When I try to reopen the .rpt file in Crystal Reports v8.5 (via Citrix on Server CTXB) it consistently takes over 12 minutes to merely open the report. Once opened, it executes with acceptable speed within Crystal Reports v8.5 and produces accurate results.
Note: If I compile the report in v8.5 on server CTXB (via Citrix), and attempt to execute the compiled report on CTXB (via Citrix), the popup with the u201CPrintu201D, u201CDoneu201D, and u201CAboutu201D buttons appears immediately, but an hourglass also appears that prevents me from clicking the u201CPrintu201D button for over 6 minutes. Once the hourglass disappears, that popup works normally and the report executes with acceptable speed (about 4 seconds) after I click the u201CPrintu201D button for a single execution. If I then close the output display window and try to immediately rerun the report (from the u201CPrintu201D, u201CDoneu201D, u201CAboutu201D popup which is still visible) by clicking the u201CPrintu201D button, the hourglass returns again for another 6+ minutes. A third such iteration results in an u201Chourglass lockoutu201D of over 6 minutes.
Note also: I can open that same .rpt file (stored on server CTXB) in Crystal v7.0 on my local PC, and it opens in less than 5 seconds.

According to the release notes, for the JRCHelperSample to compile, you must set the target runtime for the project.
To do this, either create a project from scratch that uses the Tomcat 5.5 target runtime, or go to the properties menu and ensure that the target runtime is set to the application server you will be using.

Itunes taking over 1 minute to load

Hi,
I have over 1500 songs in my itunes library. It used to load really quickly, but it seems the more songs I put into the library the longer it takes to load now. It takes over 2 minutes from clickling on the icon to itunes loading. Is there something I can do to make this quicker. My PC is brand new. It has over 1gig of memory and dual processor, so it isn't the PC which is causing it to run slowly. Any help would be appreciated.
Thanks DAWN

hi Dawn!
hmmmmm. first check to see if either your qttask.exe or ituneshelper.exe have been disabled on startup:
Background processes installed with iTunes 6 for Windows
to do so, head into your MSCONFIG, and make sure that the are both checked in your startup items tab.
Using MSCONFIG to troubleshoot conflicts in Windows
if they were unchecked, check them, restart the PC, and try launching itunes again.
any improvement in itunes startup performance then?
love, b

Opening an Excel file takes over a minute

Anyone else notice that it takes forever to open an Excel file? I know Numbers has to import it, but it takes over a minute on a Mac Pro?
I really don't want to install Excel on my machine.

Bryan,
How large is the file? If you will be frequently opening and working with large Excel files, you may as well accept that you need Office or NeoOffice or OpenOffice on your Mac. Many of us came to Numbers to escape the grip of MS, but you have to do what makes the most sense. Remember that you can still use Numbers for non-collaborative work.
Jerry

Why is there several minutes of black running time at the end of the videos I am producing in Final Cut Pro 6?

Why is there several minutes of black running time at the end of the videos I am producing in Final Cut Pro 6?

OK, wish you luck over there, seems like somebody over there should be able to help.
If you don't get help, post back here & I'll try to find somebody in the top users that can help.

Timeline has over 2 minutes of black added to projects?

Similar Messages

Maybe you are looking for