Timeline imported from Pluraleyes is corrupt

Hi
Im trying to open a timeline I exported from Pluraleyes 3. It's all messed up. Every other timeline in the project is ok and works fine. It looks different every time.

This issue is discussed in the following thread: Update 7.2.2 PP CC problems with PluralEyes (With video)
We are aware of the issue and working on a fix for the next release.

Similar Messages

Audio popping between clips with timeline imported from final cut xml file

So i imported a final cut timeline that was synced with pluraleyes into adobe and between all the cuts there is an audible popping noise. I've tried using audio cross fade but it seems to make it worse. How can I fix this??

If anyone else has this problem - you fix it by making sure you pan the audio to the center, not left or right.

Imported MP3s (mostly from Amazon) getting corrupted by iTunes?

I have a relatively large collection (~12000 songs) managed by iTunes. Recently, I have been having major problems with MP3s, mostly downloaded from Amazon, getting corrupted by iTunes. By corrupted, I mean that the song has skips and weird digital artifacts that I haven't had problems with since the very early (pre-1999) days of using Napster. If you've heard this before, you'll probably agree that it's hard to describe, but the song basically goes off-beat for a split second, can sound like a warble machine, and sometimes has very harsh ear-popping noises.
This issue just recently started happening - I want to say within the last 3-4 weeks. I don't want to think that it's the recent upgrade to iTunes, but here is my thought:
I think that iTunes is modifying my MP3s, particularly the ones with star ratings, but also other files. Once edited, many seem to be corrupt. For the ones from Amazon, I've been able to download replacement versions (after getting their cust. service to re-enable the download) and the songs play fine in Winamp and WMP, until I play them in iTunes. Then they skip and blip all over the place in all 3 programs! The file size is changed by iTunes, often to a smaller file size (seems weird, if it's adding tag info?).
ANY help is appreciated. I'm about ready to stop using iTunes, change all my files to read-only, and find another way to upload to my iPods.
Thoughts?

Are you positive they didn't import, or is it just that there aren't where you expect to find them? The thing about wav files is they don't accept tags, so if you import them they will just get added under the filename.
I would just copy across the whole media folder with libraries and all, then start iTunes with the option key held down and point it at the media folder. This will just use the library in its new location and you don't have to import, etc.

Corrupted files on import from eyefi

I am not sure this is an aperture problem or an eyefi problem but I have noticed that about 1 in ten pictures I import from my eye fi card are corrupted, they look fine in the camera, and on the initial priveiw, but after processing, they are corrupted, sometimes just the bottom, sometimes the entire image, I have gone back and looked at the .nef raw file and it is corrupted also.
I have the pro 8 gig eyefi card, and before I go screaming to them, I wanted to make sure that they are the problem
I don't seem to see this on any of my other SD cards.
Anyone have any idea?

Hello I did buy a Eye Fi mobi a few weeks ago, but i am using Lightroom and is the same problem, and using a ricoh gr and a nikon d800 and is the same. and i sue a regular sd card, and no problem.

Importing from iMovie 06, lose capture dates

When I import old iMovie 06 movies, the capture dates gets lost. Here is one of the original clips in iMovie 06:
However, after importing in iMovie 11, the capture dates are lost. I tried many variations, like import the iMovie 06 project, or cd to the *.iMovieProject directory and import the actual clips, etc.
Now, good iMovie11 clips have the capture date imbedded in the file name (as in clip-2010-03-14 hh;mm;ss.dv). However, the ones imported from iMovie 06 end up in iMovie 11 with simple names such as clip55.dv. So it's not surprising I cannot see the capture dates in iMovie 11.
So I looked inside the *.iMovieProject directory hoping to find the capture dates either in the file name or in a plist, but I couldn't (nothing in the plists below)
... Jan 23 2010 Cache/Thumbnails.plist
... Jan 23 2010 Cache/Timeline Movie Data.plist
... Jan 23 2010 Cache/Timeline Movie.mov
... Nov 8 2009 Media/Clip55.dv
etc
Finally, I opened Clip55.dv in QuickTime and looked at MovieInspector, but I could not see any capture date (similar to exif in jpegs).
So obviously I missed them. My question is where in the iMovie 06 project can I find them? If accessible, I can write a script to fix the clips imported in iMovie11 by changing their names. I tried it manually, and it worked.
Thanks in advance

Hi - Couple of things.
Click on the offending clip that you imported from iMovie in your FCP Bin and type Command + 9 to see the item properties. Either report those item properties, or if easier, take a screen shot of the item properties and post that.
Then click any where on the timeline you are having trouble with and type Command + 0 (Zero) to see the sequence settings. Either report those settings or take a screen shot of the Sequence Settings window and post that.
In order for FCP to use the video without rendering, both the items properties of the source clip, and the sequence settings must match - and both must be within standard production parameters.
Also, you can click on the source clip in the FCP Bin, then control-click on the clip and select Reveal in Finder from the drop down menu. Once that file is revealed, open it in Quicktime 7 and see if if plays correctly there.
Hope this helps.
MtD

IMovie HD won't import from Sony HDR-HC1

iMovie HD 5.0.2 (111) on my G5 desktop controls, but won't import from, my new little Sony HDR-HC1 1080i DV camcorder. Same was the case with my 12" 1 GHz PowerBook until, at the advice of a Manhattan Beach Genius Bar tech, I did an archive reinstall of 10.4 and a reinstall of iMovie HD on both my G5 PowerMac and G4 PowerBook and then downloaded all the updates. Now my PowerBook works, but my PowerMac still won't import. On an empty second HD in my PowerMac I installed OS 10.4 and iMovie HD ONLY (to create as sterile as possible of an environment), made the 2nd HD my startup drive, and still iMovie HD on my PowerMac will not import from this camera (although it will from an older Sony VX-1000 regular def camcorder).
Does anybody have any solutions, or any idea why iMovie HD now imports on my PowerBook but after the same makeover still won't on my PowerMac?
Per earlier posts, I tried playing some piano notes in Garage Band, trashing the iMovie preference files, and reinstalling QuickTime (the tech had heard QT 7.0.3 could be at fault from becoming corrupted in certain updating combinations), all to no avail.
HELP!
PowerMac G5 2 x 2.67 GHz Mac OS X (10.4.3)

I have had import/capture problems using FW drives with FCE/iMovie5 and my 2gig iMac. My canon GL2 works fine but only when no other FW devices are connected to the FW port I use the computers internal drive to capture. If your using the G5's internal SATA drives this (below) may not apply.
http://discussions.apple.com/thread.jspa?threadID=277702&tstart=0
http://discussions.apple.com/thread.jspa?threadID=277704&tstart=0
Some G5 users have had to purchase a FW PCI card or have the G5 front FW port replaced. Check this link.
http://www.xlr8yourmac.com/G5/G5usb_firewirereports.html
Cheers!
Steve

Import from Final Cut Pro not working correctly

I have a very simple project in FCP. (Ver 6) It is a HD clip that is about 5 min long with 7 chapter markers.
I exported the project as an XML file and imported that into Premiere Pro empty project.
I wind up with two assets, a .mov with same name as the .mov in FCP and a sequence with the same named sequence in FCP.
Right clicking on the .mov and selecting "New sequence from clip" creates a new sequence with the .mov on the timeline.
There are no markers.
Right clicking on the sequence asset and selecting "New sequence from clip" creates another sequence with the same name and the .mov on the timeline.
The markers are inside the .mov and audio tracks, not up on the top ruler line where markers appear when manually adding markers.
The keystrokes to move to markers do not work.
The "Clear all Markers" function is greyed out , like it is when no markers exist.
If a "Dynamic link to Encore is performed, there is no markers in Encore.
If you enter chapter markers manually and look at the project file (an XML file) you will see indexes with the chapter points , durations and names as children named "Markers" with attribute"ObjectID='22'.under "//PremiereData"
Following , in sequential order, are subsequent objects "Markers", ObjectID='23" through "ObjectID=n
However, if you look at the project file after importing a FCP project, this same function occurs, except that it is "Markers" "ObjectID=30 with the indexes and marker data 31 through n (further down in the file). This area is empty when adding the markers manually in Premiere Pro.
FYI , the project file is littered with the word "Marker" and "Markers" throughout the file, only their attributes make any node unique.
I am at 99.9 &% finished with a VB program to create / modify nodes, values and attributes, except that the XML date changes format at the node named "//WorkspaceSettings" so I am not able to edit values to make a file that will not crash when opening.
I would very much like the import from Final Cut Pro to work, or someone explain how to work with the nodes under "//WorkspaceSettings"
Thank millions for a solution.

It's a 2007 iMac with 2.4 GHz Intel Core 2 Duo. I had been using Final Cut Pro without any problems right until I upgraded to Yosemite. I'm hoping that upgrading to Yosemite doesn't mean I can't continue using Final Cut Pro - that would be extremely frustrating.

Import from catalog problems

Cannot import from catalog, LR quits and I get about 2 or 3 photos imported.
Adobe was no help, they had no idea why.
Have tried to "import from Cat" twice. Moving two different catalogs into my main desktop catalog. Both did not work.
All three catalogs ( two from laptop and my main LR cat) work fine and I can import photos no problem.
Would like to import all the changes of photos that I have made with these two catalogs that I did on my laptop. (Both cats are on an external hard drive).
Thoughts anyone?
I am having some issues with my video card. Screen right now is a bit pink. This would be the fourth video card I will need on this Mac Pro. Would this be the cause?
Thanks.

flyboys911 wrote:
Do I need to export the laptop cats if thy are already on a separate hard drive?
It might help. Exporting a catalog sometimes cures corruption in the original catalog. Try exporting into a new catalog and then importing the new one on your desktop.
Never heard of the last thing you mentioned. Can you describe more?
Lightroom has a preferences file, which sometimes gets corrupt and can cause all kinds of weard behaviour. You can delete (or rename away) the preferences file, and LR will build a fresh one when started. If you rename it, you will still have it if you decide you want it back.
To rename the preferences file, rename the file
"[username]/Library/Preferences/com.adobe.Lightroom3.plist"
to something like
"[username]/Library/Preferences/com.adobe.Lightroom3.plist.old"
while LR is closed and restart LR.
Beat

PE 9 lockup after HD import from camcorder

Hi folks, I've been using PE for many years. Currently have PE9 installed, all the updates, drivers, QuickTime, etc. up to date. No problems at all, I've produced many videos. But all of a sudden on the last few times I imported from the camcorder (Canon HV20), it imports fine but when it's done, PE9 locks up. It has the video on the timeline, but doesn't show it in the video display window. I have to Ctrl/Alt/Del, which then brings up the "PE9 stopped unexpectedly" Windows error.
When I start it back up, the video is there and saved and everything works fine. So I can work around this, but not sure why all of a sudden it's hanging after I import video, the same way I've been doing it for years? And like I said, no problems doing this with PE9 until recently. No other changes to the computer, so I'm not sure what's up, any suggestions? (I searched around in the forum but didn't find anything).
Thanks.

There are quite a few things to check, and many are included in this ARTICLE and in its links. For driver updates, do not trust Windows, or any update utility. Go to the mfgr's. Web site, plug in your audio, or video card make/model, plus your OS, then download and install the latest driver.
Next, if the situation does not improve, please post the full details of your system. See this ARTICLE. Pay special attention to the I/O sub-system. This ARTICLE will give you background and tips.
Good luck, and please report back,
Hunt

Empty mailboxes after importing from panther to tiger - can't solve

Dear all,
I have been happily using my ibook G3 300mhz for seven years now, running system nine first then jaguar then panther (currently 10.3.9).
I have nearly all my emails from 98 onwards, which I first imported from eudora to eudora (8600 to ibook) and then from eudora on ibook to mail on ibook. I have a pop account and a mac account with an alias (.mac and IMAP therefore). I probably have about 10.000 emails scattered in many folders and subfolders. Some of my mac mails are even saved in folders belonging to my pop account (thus located on my mac).
I've been waiting for the new macbook for a couple of months, had it for FOUR days now and seem unable to transfer my mail from my ibook to my macbook. I have tried both copying the whole mail folder and importing mailboxes from within mail.
With the first option when I open mail it says it needs to import my messages and is then stuck on message 659. May be a corrupt message but I have no way of knowing which one it is and delete it from the library. With the second options it imports all boxes alright, even displaying a numebr of messages whcih appears realistic, but I get the usual "You need to take this account online in order to download it" message. The only messages I can actually see are those in my inbox for my .mac account and those still on the server for my pop account. Any and all messages in any of the other mailboxes (even the .mac ones which are definitely on the server) seem to have disappeared.
I have even tried backing up from the ibook with mac backup and then restoring to the macbook (has worked for preferences, itunes playlist etc) the result is the same: boxes are there but appear empty.
I think I have read all threads concerning similar problems but don't seem to find a suitable solution. I was so looking forward to getting my new computer and being able to use mail 2 and now I've been stuck for days, with a huge waste of time. Why can't my intel core duo with tiger do what my little ibook with panther did so successfully and faithfully, albeit admittetly really slowly?
Needless to say I need to have all my messages exactly in the same mailboxes as I have them on my old comp, I certainly can't throw them into one huge box and sort them from there!
Any help will be greatly appreciated. I am even willing to spend a few bucks on any conversion program that can do the job (although after just purchasing the macbook I shouldn't have to spend anything more) just to avoid this incredible waste of time.
A faithful apple user who is getting kind of frustrated
Diana

Hello, Diana.
I think I have read all threads concerning similar problems
Have you read this in particular?
Help! "You need to take this account online in order to download it."
You won't find the solution to your problem there, but it should let you better understand it. In particular, if using Mail on the iBook under Mac OS X 10.3.9 is still an option, you may want to try to clean up your mailboxes there first, using the following article as a guidance:
Overstuffed mailbox is unexpectedly empty
Before start troubleshooting this, you should make a backup copy of the ~/Library/Mail folder, just in case.
Post back with your observations.

Generating a PDF from a OTF (imported from CLOSE_FORM) and send it by mail.

Hello!
I have a problem.
I'll try to explain it toy you.
I have a SapScript that the user has the option to send it to the printer or have a Print Preview. I need to send it by mail in PDF format.
If the user select PRINT, a spool id is created, I can get the OTF, generate the PDF and send it by mail. Everything OK with that.
The problem is if the user select PRINT PREVIEW I don't get a spool id. So, what I did is to get the OTF from the CLOSE_FORM MF and generate de PDF from there. I tried several FM to generate the PDF but for sure I'm doing something wrong, because or the PDF is corrupted or I have a problem with the parameters in the SO_NEW_DOCUMENT_ATT_SEND_API1 FM.
So, what I need it: Generate a PDF from a OTF imported from CLOSE_FORM FM and send it by mail.
Examples or the FM I can use are welcome.
I tried to do search here, but I couldn't find anything that may help me..
So, please... Show me the light!!!
Thanks!!!
Bettina

Part 3
* Send Report
clear:    maildata, mailtxt, mailbin, mailpack, mailhead, mailrec.
refresh: mailtxt, mailbin, mailpack, mailhead, mailrec.
* Creation of the document to be sent File Name
maildata-obj_name = 'REPORT'.
* Mail Subject
maildata-obj_descr = 'Your Report'.
describe table mailtxt lines tab_lines.
read table mailtxt index tab_lines.
maildata-doc_size = ( tab_lines - 1 ) * 255 + strlen( mailtxt ).
* Creation of the entry for the compressed document
clear mailpack-transf_bin.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'RAW'.
append mailpack.
* Creation of the document attachment
loop at solisti1.
    move-corresponding solisti1 to mailbin.
    append mailbin.
endloop.
describe table mailbin lines tab_lines.
mailhead = 'REPORT.OTF'.
append mailhead.
** Creation of the entry for the compressed attachment
mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 1.
mailpack-body_start = 1.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'OTF'.
mailpack-obj_name = 'ATTACHMENT'.
mailpack-obj_descr = 'Some Report'.
mailpack-doc_size = tab_lines * 255.
append mailpack.
mailrec-receiver = lv_email_address. "<-- a valid email address
mailrec-rec_type = 'U'.
append mailrec.
* Sending the document
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = maildata
            put_in_outbox              = 'X'
       tables
            packing_list               = mailpack
            object_header              = mailhead
            contents_bin               = mailbin
            contents_txt               = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            operation_no_authorization = 4
            others                     = 99.
Regards,
Rich Heilman

Why is my import from DVD-R going soooo SLOW??

OK, I'm very new in the Mac world and am still trying to move my photos from my PC. I burned all of the photos to a DVD-R using the Kodak gallery program. I have 3 DVDs of photos.
Now I am in the process of importing into iPhoto. I opened iPhoto, inserted the DVD #1, and then selected import to library. The first thousand photos imported fine, but the last hundred or so have taken FOREVER...like several minutes per photo.
Should I let this just go overnight, or stop the import and try again?
Has anyone ever experienced this slowness when importing from DVD?
Thanks!
CC

CC:
You would be better off copying the files to a folder on the desktop and then into iPhoto as copying from a disk the file first has to be copied to a temp file and then into iPhoto. I don't know how far you are in the current disk import but for the future ones I'd definitely copy to a folder first and then into iPhoto.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Can't Import from iphoto

Today I was attempting to import from iphoto and a message window popped up stating,
"Invalid I photo Library" Importing library versions earlier than iphoto 6.0.6 are not supported. Please upgrade your iphoto library.
I believe I have the latest version, Iphoto 09 version 8.1.1. It was all working fine yesterday. Is it time to call Apple care?
27" imac SL 10.6.2
Any help or ideas will be greatly appreciated.
Jeff

Your problem with iPhoto is seems like an issue with some library corruption. +In iPhoto+ Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
As to the licencing issue:
Aperture can be installed on two machines but can only be used on one at a time. You asked the salesman ""Can I run the already purchased app on the new mac?" and you can, but not legally. You don't have to purchase another licence, you can simply remove Aperture from one of the other machines.
Regards
TD

Importing From Canon Vixia HF M30 to Final Cut Pro

Hey there, I have been trying to import to final cut with some success. Importing From Canon Vixia HF M30 from my sd card.
I used the easy setup.
FORMAT HD
USE HDV APPLE INTERMEDIATE CODEC 1080I60
I go to log and transfer select the clips I need and click add to que.
So perfect there are my clips in my bin, I bring them to my timeline and a green line appears above my video, uugggggh. I know this is a rendering issue but why.
Please help does anyone know why this is happening.
This is very frustrating, I have been trying to read the other discussions I didn't see anything on it let alone the info on the net, trying different things just not working for me.
Thanks Gang

Your camera records AVCHD. Convert to prores 422 or prores 422(LT) on log and transfer and make sure your sequence matchs your footage.

BI Admin Tool crashes when importing from Essbase

Hi folks,
I'm trying to import an Essbase cube into my OBIEE RPD and it is causing the Admin Tool to crash with a generic Windows error msg that "BI Admin Tool has stopped working and Windows is looking for a solution"..
I'm using OBIEE 10.3.1.4 with all components, including BI Server installed on my local machine which is Windows 7 32-bit. The Essbase server is on a different machine. The RPD is working fine for several other data sources, and crashes only when I try to import from Essbase. The Essbase server is also working fine. The crash happens regardless of whether I'm in online or offline mode. I even tried to create a new RPD in case the other one was corrupted, but even the new one crashes.
I have Essbase client installed on the same machine as BI Server and my environment variables seem fine. All ports on the Essbase server machine are open and I can ping it from the BI Server machine, so it is not a network issue. I know this version of OBI is not officially supported on Windows 7, but it's working fine in all other respects. Has anyone had a similar problem in the past?
Appreciate any advise.
thanks,
Axe
Edited by: axe1 on Oct 19, 2010 5:54 AM

I wonder if cube import only works when using a 32-bit Essbase client?

Timeline imported from Pluraleyes is corrupt

Similar Messages

Maybe you are looking for