Timeline: Move all rightward clips to right

I discovered a useful keyboard shortcut or tool or something which allowed me to select, or point to, a clip in the timeline and then get it and all clips to its right, up to the end of the sequence, to move rightward, so creating a gap, even when the end of the sequence was off the right hand end of the timeline. But I can't find it. Any clues please?

I believe you're referring to the track select tool.
Hit the 'T' key on the keyboard to select the tool, then keep hitting it till your cursur looks like two arrows pointing to the right. Then you can click on one clip and it will select everything on all tracks to the right of that clip. You can drag this selection wherever you want to put it.

Similar Messages

Adjust end of clip and move all other clips accordingly

having found this help topic about trimming clips: Adobe Premiere Pro Help | Trimming clips, i figured i might be able to figure out how to adjust the end of a clip and move all subsequent media content accordingly.
the situation would be: adding a word to dialogue, cutting out a word, something like that -- where you have to shorten or lengthen a clip, and you need to move all subsequent content accordingly.
i used to know the name of the folks that did the study in the late 90's regarding help file "readability," which then resulted in the trend that help files don't offer the ability to dig deeper into the definitions of a software's vocabulary, but i forgot.
at any rate:
i don't know what the blue thing is called with which one moves around on adobe's timeline.
now, i'm assuming i'll be able to dig that up.
but i have a series of graphics -- and i want to move adjust the length of time graphic1 appears (let's say extend it's length). i'd like to "bump" or "move" or "ripple," or "roll," or "regular edit," the graphic so that -- when i move the right side of the graphic -- all subsequent graphics get "bumped" to the right (later in time).
while i appreciate the alliteration of regular ripple and rolling edits, i did need to try them out to see what they do.
and none of them appear to "bump" all subsequent content.
i gather that i could "lasso" all of the subsequent content and nudge it and/or move it around -- but really -- i'd like to be in clip 19 -- adjust when that clip ends -- and move all subsequent content either later or earlier in time -- accordingly.
ideally that "desire" would extent into: i am just going to move visual content, and "i am going to move visual and audio content."
please have compassion for my "negative" tone, because i am having a bit of a "losing faith in humanity" moment right now - because i took about a 5 year break from tech and am now returning to tech -- and i expected user procedures to have improved.
i'll be OK and will likely blog about it, but for now: can you either tell me some keyboard shortcuts or direct me to help files or just explain -- how to edit the various types of content in premiere the way i've outlined?
i want to move all of the subsequent content over to the right. i do not want to just move the end of the last clip and the start of the next clip -- keeping the end of the next clip in the same place (which is apparently what the red double double arrow does).
i seem to have tried out "regular, ripple, and roll," and maybe i'm almost there -- or one of those methods actually works -- but the word that is coming to mind is "bump."
bump or nudge or adjust...
anyway -- got any tips?

hey Michael, your reply helps restore my faith in your humanity -- but seriously -- i need to use the "ripple delete tool" to NOT delete -- but extend and push?
really?
that is as obnoxious as going to the start button to shut down.
how about going to the shut down button to start? how about that Bill Gates.
and we still can't tell the difference between a lowercase l and an uppercase I online. Good job humanity. Sometimes even the 1 is the same as l and I -- so you have 1lI all looking the same.
My 8 year old daughter thought I live in LLLinois? She was trying to read Illinois.
Of course I have to go to "delete" to extend. What else? I have to go to start to shut down.
ps --- that is why humanity has gone through the effort to call those thingies on doors: handles. See a handle can be used to open AND close a door.
it is not the "close knob" it is the "door knob." why? because you can use it to open and close.
it is not the on/off button -- though some call it that -- it is the "power" button.
You go through the effort to create vocabulary that makes sense if you are going to create and sell software. I understand that sometimes it can be hard, but there are plenty of people, myself included, who have the intellectual capacity -- to find or create these kinds of cohesive procedural flows -- to a large extent due to our linguistic abilities.
it's not rocket science, but it is, in a particular way -- quite difficult. it requires mental effort or some kind of "capacity," to realize that a "handle" often moves us between two or even more states -- like: open and closed.
that is why we do not call it the "on" button.
what does my HP printer have? oh it has an "on" button.
dumb dumb dumb dumb
more dumb
and then -- i am even accosted with dumb -- from adobe?
like awesome software industry standard adobe?
like "we made PDF files" adobe?
are you serious?
ugh -- ok i will go to "delete" to NOT delete and extend
i don't even care what that yellow thing is called anymore. i am just going to press command and click and get this project done for now...

How to move all footage to the right

I need to insert some clips in the middle of my timeline, but can't stumble my way through it.

Hi
Use Your arrow pointer and select it by making a square over it and move slightly to the right.
If You don't have all TimeLine visibly - then {Shift+z} and all will fit to be viewed.
Yours Bengt W

How to move all thumbnail clips into project library for editing?

Hi there ...
I haven't used imovie 08 for quite a while ... and I've forgotten how to do a major step .. which is leading to a lot of frustration. I need to drag all my thumbnails into the project library and have them available for editing. ANy way I try it now .... it seems to create one big clip in the project library .. so when I want to add a title or something ... when I drag it over to the clip ... it selects to add to the whole movie. Somehow I need to retain the individual thumbnails or clips ... so when I try to add effects it is just added to one clip ... not all of them ...
I had this problem before and I can't remember how I moved all the separate clips from the event library to the project library and had them retain their individual clip format available for edit...
CAn anyone help me .... thanks ....

Hi,
This is a shot in the dark but: if it is anything like 09 there is a little slider in the bottom right hand corner of the project window which, if it is all the way to the right will only give you the whole movie.
Pull it to the left to give you different thumbnail settings.
Hope this works.
DM

How do I move all clips from an event into the edit line...

If I have an event of tons of clips that comprise an hour of footage, how can I select all of those clips at once from the event library and transfer them to the edit line above?
There is no Select All feature, that I can see, and it takes forever to highlight each chunk of clips, one at a time, and drag them up.
I'd like to drag the whole 1 hour's worth of clips in one event in my library up to the edit line at once.
Thanks!

Hi Rich,
I am trying to somehow "select all" clips, (not just all shots within a clip), but all 100 or so slips from an entire tape, from the first clip, to the last clip, and everything in between, and move them all up to the edit pane at once.
As it is now, I have to click on a thumbnail, select the entire clip, and move one clip at a time up to the edit pane.
I want to move all the clips up at once.

Move all clips to the right of the crt in cs5

this shortcut used to be shift-m, but that no longer seems to work on cs5.
how do you move all clips to the right of the crt?

It's been moved to the A key.

How do you move a sound clip in the timeline?

I have not had this problem before. I have put many songs into the timeline, and repositioned them. Today I pulled up a project and attempted to reposition a song to fit in better with the clip, and I'm unable to do so. I can't select the song, or anything else. Obviously I have set or locked up this track, and I can't figure out how to unlock if that is what I have done. I have 6 songs on that track, Audio track 2, and I can't reposition any of them. I can't even remove them from that track. What am I doing wrong?

Hunt, most of my music files, over 9000 songs, are mostly mp3 files and a few are wma, and because of copyright laws I wouldn't use them in a commercial project I'm working on anyway. When I am working on a project for a client I will generally use higher quality WAV files. This project was being done just to learn some new techniques, gain some more experience with PPCS4, and expand my knowledge with the program. I have this huge number of music files and styles to work with, so I can do a great deal of experimentation to see what different songs can do to the mood of the video.
As a test, I did put the exact same songs into the timeline on a different audio track. The problem track is audio 2, and I duplicated those songs on audio 3. I did the exact same editing. I faded them in and out the same as before. Split one song into 3 sections had parts of it come in and out over a video section of 9 minutes duration. They are working perfectly. I was just working on one section of that project a half hour ago, and I was still able to select and move each of the four songs on that track any way that I wanted to. However, the track just above it in that same timeline, Track 2, is still frozen.
Hunt, just a moment ago I solved my problem. Still not being that familiar with the program, two days ago I know that I was playing with all of the controls, and I obviously hit one of them without knowing one of its side effects. I hit the show "show track keyframes". I'm sure that you know it, but I didn't realize that when that function is selected, you can't do much else with the track but play with those keyframe. Even though I didn't have the track locked, in the traditional way, it was still, for all practicall reasons, locked. I unchecked that function and now everything is back to normal again on that track.
Something very simple, as many things turn out to be when you understand it. However, maybe someone else will make the same mistake, and my posting here will help them.
I will use your suggestions for using .WAV files. Thank you again.
Terry Lee Martin
Date: Mon, 7 Sep 2009 14:29:37 -0600
From: [email protected]
To: [email protected]
Subject: How do you move a sound clip in the timeline?
Terry,
What is the purpose of using the .WMA files? I'm sure that you have a good reason, but they can be problematic, at best. I only use them as a trasfer medium, when I need to get a DD 5.1 SS soundtrack into Audition for editing. There, I break them out into 6 discrete .WAV files, edit in Multi-track Mode and then usually Export as the 6 discrete WAV's to be encoded to DTS, or similar.
If you do not have a compelling reason for using the .WMA, try PCM/WAV @ 48KHz 16-bit and see if the issues go away.
Good luck, and let us know how it goes please,
Hunt
>

How to move all clips over

Is it possible to move all audio/video clips over to insert a new clip for example. Right now, I'm highlighting all the clips and dragging them.
For the above, is there a way to get more precise by using the keyboard?

Thats weird.
Why would anyone want that behaviour for a ripple insert edit.
When I use it (CS4) ....it inserts the clip and ripples the clips to the right..towards the right. ie later in the program.
I dont understand why it would want to change the start time of a program.
Wondering if I have the wrong grasp of what the OP is wanting to do.
Maybe its because I am in the Southern Hemisphere

I was almost done my project. I hadn't published it anywhere. Then, the next day, the clips from my timeline went all grey and there was an "out of date" icon. My project was lost. What happened? It's not the first time it's done that!

I was almost done my project. I hadn't published it anywhere. Then, the next day, the clips from my timeline went all grey and there was an "out of date" icon. My project was lost. What happened? It's not the first time it's done that!

You can undo your permission changes. Probably the most relevant one is cookies. Try one or both of these methods:
(1) Page Info > Permissions tab
While viewing a page on the site:
* right-click and choose View Page Info > Permissions
* Alt+t (open the classic Tools menu) > Page Info > Permissions
(2) about:permissions
In a new tab, type or paste '''about:permissions''' and press Enter. Allow a few moments for the list on the left to populate, as this information needs to be extracted from a database.
Then type or paste ''rcn''' in the search box above the list to filter it to the most relevant domains. When you highlight a domain, you can adjust its permissions in the right pane.
Any luck?

Move all scene markers along with clips

My project is about half completed, and I realized I want to add another clip to its start, before the main soundtrack starts. I can easily select the soundtrack and all of the clips on the Video 1 track to move them all at once, but is there any way to move the scene markers at this same time? I've already spent the time to put in a bunch of markers at key points in the soundtrack, and I don't want to have to completely redo this when I move the soundtrack.

In PE, I do not believe that there is. Hope that someone will prove me wrong.
In PrPro, there are several types of Markers. The true Scene Markers are referenced to a frame in a Clip. These move with that Clip. Other Markers are all referenced to a time on the Track, so they do not move with any Clip. I believe that this will be the case of the Markers available in PE. If I'm still in the editing phase, I will only use the Scene Markers (PrPro), so that they DO move with their respective Clip's reference frame. It's not until I'm done and the client has given approval, that I will add other types of Markers.
Good luck, and I hope that I am wrong about PE's Markers.
Hunt

Move all fields and grid lines to the the right

I have a report where I want to insert two new fields to the left of all the existing columns. Can I move all of my fields and grid lines to the right at once? I don't want to start at the right and drag each field out to the right two inches, etc. Hoping there is an easy way to accomplish this at once. Thanks.

Thanks - that I know. Really would like to see the grid lines move with it. Kind of like when you adjust columns in a table in ms-word. You can move a left most column and shift the others right of it in one motion.

While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips?

While trimming a clip in my timeline, the entire timeline moves with my trim. How can I stop that and leave a gap in-between clips? Also when I use my blade it only leaves a dotted line in the clip. How can I make that a solid line? I do a lot of flickering in my videos and don't need that some what of a snapping effect while I edit. Please help me someone. I believe i upgraded from FCP 10.0.1 to 10.0.3 and before it never did this.

Mark an In point and an Out point (which creates a Range) and hit the forward delete key (Replace with Gap.) On a MacBook, you'll probably need to hold down the Fn key and type the Delete key (or, I think you might be able to use Shift-Delete as the same command). On an iMac/Mac Pro keyboard, it's the key just to the left of 'end' or the next key above the left arrow key.
You can use the Range tool (hold down the R key and click drag over your clip) or the Blade tool to cut at the in and out (then select the cut and replace with gap).
You can also go into Commands > Customize (command-option-K) and assign a different key to Replace with Gap.
If you need to ripple edit the ends (cut), create a small section that is Gap, and hold down the T key while you use the mouse to click drag both ends (double sided trim cursor) of the cut.
Don't worry about the dotted line blade... That just lets you know that the frames on either side of the cut are continuous, or sequential — nothing has been moved yet. Once frames from either side of the mark have been cut, it becomes a full fledged cut resembling a separate clip.

When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.

When I move high quality clips into my timeline in Final Cut Express HD, they look and export low quality. I have tried converting the clips and de-interlacing them, but they always look the same, What is the problem? Thanks so much.

You should check that the Project settings match the clip settings before editing them to the Timeline.
Only newly created Projects will change not existing ones by adjusting the Project settings.
If, for example, you have a Project set to NTSC DV you can only end up in trouble if the clips are PAL 1920 x 1080i.
Al

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, just one big clip,,,pls help, i need to make some changes to the project..thanx

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx

Hi Stephen, thanx...
Yes, we are talking about FCP X...this is the thing:
I worked on a project a few days ago and went to share - export movie.
Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
I tried to import the saved .mov file, but it opens the same....as one long clip...
Pls help...thanx.

Can't move set of clips together in timeline

Hi there,
I wish to move around a set of several clips together by selecting all of them and draging.
Each time I proceed, the clips are highlighted, but then when I want to move all of them, by moving the pointer, only one remains highlighted and moves.
I must have changed a setting but I can't figure which one...
Could someone please help ?
Many thanks
Ivan

A transition is the reveal, over time, of one picture by removing the other. So yes, some effect that you would have included.
If, for example, you have a dissolve between a shot you want to leave in place and a shot you want to move, you won't be able to without removing the dissolve first.

Timeline: Move all rightward clips to right

Similar Messages

Maybe you are looking for