Timeline moving when I make a Speed change!! Can this change?!?

As I'm sure everyone is aware, when you change the Speed of a clip to either slow it down or speed it up the entire rest of the time changes with it. For example, if I speed up a clip I am editing at the beginning of my sequence every clip after it moves forward on the timeline to affect my speed change. This is VERY annoying because it means that when you go back to adjust the speed of a certain clip and you have cliped placed after it (that need to stay where they are) ALL OF THEM MOVE. Does anybody know of a setting or perference where this can be changed.....? Please, I'm desperate!

This is the way it works, and you need to adjust your workflow around it. If it didn't work this way, if you sped up the shot, you'd have a hole, and if you slowed it down, it'd overwrite your footage after it. It adjusts the section it is in because that is how it is designed. Don't like it, do things differently.
1) load the clip in the viewer and slow it there first, THEN cut it in the timeline.
2) drop the clip at the tail of the sequence, double click on it, then adjust it, then move it to where you want.
#1 is the way to go...and is the way FCP was designed to work. It is just something you have to get used to.
Shane

Similar Messages

When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic, I use the voice recorder all the time and I have no problems w FaceTime. My headphones and Bluetooth do the same thing as far as not being able to be hea

When I make a call, I can hear the person on the other end but they can't hear me. It's not the mic bc face time or voice recorder are not affected. I can't even use my headphones or Bluetooth to get around the problem. This has stumped 2 geniuses, they just try to swap it out for $150.

I am having the same issue with my iPhone 4. I can hear everyone but they can't hear me. Visited Apple Store and they said speakers were out, both bottom mic and top one for speaker phone. Said they were busted. Reloaded all software and didn't work. Got in parking lot and worked for 1 call. Now it's out again. Wanted $150 for new phone, haven't done it yet. don't know what to do.

When I make a call, i can't hear the other person, when I get a call, I can hear them and they can't hear me. What's up?

when i make a call, i can't hear the other person but they can hear me. when i get a call, i can hear the caller, but they can't hear me. what's up?

Hello there, Maribelita.
The following Knowledge Base article has some great steps to work on resolving the exact issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

I connect my iphone5s to my 2015 Terrain using Bluetooth, when I make a call I can hear the caller but they can't hear me. Anyone else have this problem? How did you resolve it? Other phones connect and work perfectly.

NNeed help I connect my iPhone 5s to Bluetooth in my 2015 GMC Terrain. When I make a call i can hear them but they can't hear me. Anyone else have this issue? How did you resolve it. Other phones work fine, just not my phone.

Hello Sandylynn,
After reviewing your post, it sounds like you can connect the device with Bluetooth and make and receive calls but they dont hear you. I would recommend that you read this article, it may be able to help the issue.
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
People can't hear you during a phone
Thanks for using Apple Support Communities.
Have a nice day,
Mario

When i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5

when i make calls, all i can hear is static, and when i plug in headphones or turn the speaker on, it still doesnt work. but facetime, music, an apps sound still work. help? iphone 5

Hello Delaney1130,
It sounds like you are getting static on both the receiver and the speaker when you make a call. I would use the troubleshooting from the following article to help resolve the issue named:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling

When i make a call they can hear me but i cant hear them

when i make a call, they can hear me but I can't hear them. If I put it on speaker, then I can hear them. I have reset my phone-that doesn't solve the problem.

If there's no obstruction in front of the headphone speaker and the volume is pumped up to max, the component may be kaput. So yeah, a trip to the Store will be inevitable.
My boss got an i5 in mid--Jan. Not a week later, her callers started complaining they couldn't hear her. She eventually ended up in the carrier's customer center (no Apple Stores over here), where they gave her a new-from-the-box replacement, no questions asked. You may get lucky too.

When I make A call I can barely hear the ring or the voice on the other end, but the person i called can hear me ok

when I make a call I can barely hear the ring or the voice of the person on the other end, but they can hear me fine

iPhone Volume Controls
iPhone Sounds & Silence
ÇÇÇ

I have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

i have an iphone 4s, when i make a call i can hear them but they cant hear me so i have to put it on loud speaker

Hi gallimore1998,
It sounds like you may be having an issue with one of the microphones on your iPhone. Here is an article that will help you address this:
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

When I make a call I can hear the other person but they can't hear me? Tried everything.

When I make a call, I can hear the other person but they can't hear me? Tried everything. Took it to the local ATT store and all they could tell me is it shouldn't be happening and to take it to an apple store? Any ideas?

Try to isolate the issue. Use earphone and if the issue still happens then it might be the phone issue.
- If earphone works fine then it may be the mic on the iPhone. Try cleaning the debris on the iPhone. Finally a restore of the device and try to set it as a new device. Tha will isolate if it is a software or hardware issue.
- You can take the phone to Apple store once you have tried all this.

When I make a call, I can hear the other person, but they can't hear me. If I put it on speakerphone, we can both hear each other fine. What is wrong?

When I make a call, I can hear the other person, but they can't hear me. If I put it on speakerphone, we can both hear each other fine. What is wrong?

take a look at the link
Iphone: hardware troubleshooting
http://support.apple.com/kb/TS2802

TS1631 When I make a call others can't hear me?

When I make a call others can't hear me?

If your microphone is not blocked (at the bottom right) try this:
1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
3. If the issue persists, Your iPhone need repair.

HT201229 When I make a call I can't here any thing

When I make a call I can't here any thing

Hey jackie8457,
Thanks for using Apple Support Communities.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Have a nice day,
Mario

When i make i call they can't hear me? what i need to do?

I have Iphone 4. it was working well but now when a make a call nobody can't hear me. i need to press any bottom?

Hello Californiapink,
It sounds like the ooVoo app on your iPhone is not playing audio. I recommend following the steps in the article below for an issue like this (you can skip step 3 since it is not related to this issue):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have cs4. Had to rebuild my mac OS after malware infected it. Now getting an error code 150:30 when trying to open PS. Can this be fixed or do I have to upgrade to cs6?

I have cs4. Had to rebuild my mac OS after malware infected it. Now getting an error code 150:30 when trying to open PS. Can this be fixed or do I have to upgrade to cs6?

150:30 means licensing is broken. It's a common CS4 error. On Macs it usually happens when Photoshop is retrieved from backup or migrated from another Mac. Photoshop is never meant to be moved that way. As advised, you should uninstall and reinstall from your discs.
Sine reinstall only apply the base install and the CS4 Help > Update function is outdated, you will have to manually download and install your updates from here: Product updates for Bridge and Photoshop.
Gene

How do You Make Accurate Speed Changes To Clips?

How do you apply a speed change to an audio clip in with frame accuracy? I have 2 audio clips, one from a camera and the other from a cheap solid-state recorder. The latter has audio drift and needs a one-off, constant adjustment to sync it with the camera audio.
However, FCP only wants to execute clip speed changes down to 1/10th of 1%, which is not small enough. Does anyone know what to do here - either within FCP or Sountrack Pro? Thanks.

I just know that often when capturing long segments of DV tape for our shows, we occasionally get a clip that comes in at 47.998 or 48.002, instead of the solid 48kHz.
When I export to aiff, it seems to clear up any sync drifting we experience with the original clips.
Might give it a go.
STPro is a solid option as others pointed out. I simply suggested a quick fix to a possible sync/drift issue. (quicker than learning a new interface...though that's something that should be done anyway, for the tools STPro offers).
K

Timeline moving when I make a Speed change!! Can this change?!?

Similar Messages

Maybe you are looking for