Timeline progressive with media interlaced - Pro App?

It's been 6 years since I work with FCP and i found something very bad about FCP with progressive timeline and media interlaced.
If you want a use interlaced materials like DVCPRO interlaced but you want edit your movie in progressive. You have to change the sequence properties like that :
But with interlaced media you loose one field even if you use the deinterlaced filter.
Exemple with progressive timeline and interlaced source : FCP Loose one field you can see the stairs on the hand.
Exemple with progressive timeline and interlaced source but with Desinterlaced video filter option anti-flicker max :
The only solution i found was to modificate the interlaced tag from the source properties to "Progressive". Insert the clip and applies the desinterlaced vidéo filter. But we must change the tag for each source clip independently.
I don't understand this situation. Do you ?!
If you have any question ? My english is not very good.
Sincerly

Your English is fine, it's our French (or Japanese) that is no good.
You need to think of interlaced material differently. Interlaced video is not made up of 30 individual frames like progressive media; those 30 frames can be thought of individual photographs take 1/30 second apart. Interlaced media consists of 60 individual photos taken 1/60th of a second apart. If you combine one odd and one even field to create a progressive frame, the resolution diminishes dramatically because the fields occur at different points in time. If those hands are moving at all in your shot, the progressively combined fields will bother you more than the discarded field. Then consider a cut between two clips. The cut may require an odd filed from the first clip and the even field from the second clip. That is a visible glitch.
That is one of the fundamental reasons deinterlacing filters discard one field. They must.
Some deinterlacers can combine the adjacent fields but they must be used carefully and are generally not reccomended for media that includes significant movement.
bogiesan

Similar Messages

Help with photo studio pro app purchase

Hi purchased the photostudio pro app , but when the device restarted it was nowhere to be seen when i search on app world for it there is no button to re-download and in my app world it shows up as unistalled, but again no option to re-install
Please help, how can i get my money bqck from these rob dogs

Hello!
I suggest that you clear the AppWorld application cache:
1. Open App World
2. Go to My World
3. Follow one (and only one!) of these steps:
3a. For keyboard-based BB's -- Hold down the ALT key and then press, in sequence R, then S, then T
3b. For Touch Screen Only BBs -- Hold the num-lock (!?123) button so it locks and then press, in sequence 3, then 4, then (
3c. For newer (e,g., OS6 and 7) BB's, see this KB:
KB24714 How to clear the BlackBerry App World cache
4. AppWorld should close.
5. If your BB locks after issuing the cache clear, perform a battery pull reboot
6. Return to AppWorld/MyWorld (it may be sluggish while it re-synchronizes).
If step (4) does not happen as listed, then the clear cache did not work.
As for refund request, you seek that via your formal support channels, which always begin with your mobile service provider, who can escalate cases into RIM at no cost to the end user.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Troubles with Circuit Wiz Pro app crashing

I have an instructor that purchased Circuit Wiz Pro app and every time he tries to run it crashes

mrobumc wrote:
I mean crashing 3-4 times per event and losing ALL of my work. Today is about my last straw . . . I've worked for a couple of hours and it crashed and I lost all of my work YET AGAIN.
Final Cut X saves your changes as you make them, so how have you lost any work? Final Cut sometimes hangs and I have to restart it but I have never lost any work.
AND LET ME ADD THAT PAID SUPPORT WILL COST ME $800!
What paid support is that?

Office 2013 Std (local) in combination with Office 2013 Pro (App-V)

Hello,
I have multiple RDS servers, that have Office 2013 Std installed locally. I did this on purpose, after reading some blogs pointing out Office 2013 is a complicated applicatie to stream well. And of course Office 2013 is highly critical to my clients.
So I have a local installation of Office 2013 Std on every RDS server.
The catch is, that the client also has an open license for Office 2013 Pro. This is because some users need to work with 'Access 2013'.
So I thought it would be nice to use App-V to stream Access 2013 to the RDS servers. I have created the package for Office 2013 Pro, with Access in it. And I succesfully published Access 2013 to the group of users. So I can use Access on the RDS servers.
The problem is, that when I click on the appliation "MSACCESS.exe", the application pops up in taskmanager and is immidiatly shut down again. So it never launches. No error, no nothing.
I can't find any directions in the server, applicatie or App-V logs in the eventviewer. Does anyone have a clue where to look?
Thanks in advance

I think to be on a safe side, using a 'true' control system like AppSense or using dedicated RDS servers would be the only legally valid option.
Even when Office (or at least Access) is virtualized, the licensing part and product key handling is done natively on the RDS servers by the 'Office 2013 Deployment Kit'. Besides others this includes a locally installed 'licensing stump'. Therefor there
can be only one Office Suite product key be assigned to a RDS server machine.
In fact you could tell the Deployment Kit to use the Office Pro key (allowing a virtualized Access to run), but then also the locally installed Office Version would (attempt to ) be licensed as 'Pro'. That potentially won't work. In fact you could re-configure
the local Standard Office installation to consume Pro licenses, but that doesn't fit to your legal licenses.
As Aaron write, legally an Office license is bound to the endpoint device, so you'd have to make sure that your Access App-V package can only be access by permitted client machines. And while App-V can filter application on the accessing user and the executing
machine, it can't filter on the accessing end-point.
Though we don't like it... 3rd party or a server silo seem the way to go.
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

I Guess I'm Playing with a Real Pro App, Now!

iMovie it isn't! Wow, what did I get myself into? Final Cut Express 4 is a different animal!
How do you set this up? I got an easy setup screen, and it isn't easy. What do I do? I have an HV20, but now what?
Please, help!

Hi Scott! Welcome to the Final Cut world!
I also have an HV20. For the easy setup, you're going to want to select the quality settings to HD 1080i. If you have an external hard drive and want to store captured video there, change the scratch disk in one of the toolbars. Just search around the easy setup window, fix the above, and you're off! Check out Apple's tutorials at: http://www.apple.com/finalcutexpress/tutorials/
They should help you get started capturing and editing.
Good luck (and don't worry, I felt the same way when I purchased Final Cut Express 3.
J

Image size problem with Retina Macbook Pro

I exported raw images to Jpg and then resized as 1200 x 800 resolution images through "Easy batch Pro" app. When I uploaded them, they were extremely large. I've tried it several times and the result was always the same. Is it a problem with "Easy batch Pro" app, or something with Retina Display resolution? I also resized them as small size like 600x400, but the image was totally broke, and apparently had different look when I saw the original via aperture. What should I do?

What's the problem exactly? Call and complain. It's up to them on how they want to handle it, but if it's something normal or minor, they'll just fix the issue under warranty and send you on your way. That's how warranty works. In instances where a user has had repetative failure of the same kind or others with the same system, a complete replacement was done, but those were issues that border on the "it's a lemon" idea.

Informant Pro app issues.

Has anyone had any issues with the Informant Pro app for the ipad. Mine freezes the Ipad and shuts down the program, I uninstalled the app and restarted the ipad but it still does the same thing. When it did work for 5 minutes i saw that it started to sync with my google calendar and possibly my outlook but then it shut down. Can anyone help?

http://www.pocketinformant.com/wp/

Interlacing with Adobe Premiere Pro CS5

Today I have noticed a problem when settings the fields of a piece of video in my timeline to "interlace consecutive frames". In CS4 this worked perfectly but in CS5 it makes my video twice as fast and becomes out of sync with the audio. Anyone else having this problem?
My project setting is DV Pal 25fps 4:3.

Welcome to the forum
I copied this from the help.
Interlace Consecutive Frames
Converts each pair of consecutive progressive-scan (non-interlaced) frames into the two interlaced fields of a single frame. This also results in the clip running at twice its original frame rate. This option is useful for interlacing clips created by animation applications not capable of generating interlaced frames. Ideally, you could use it to convert 60-fps progressive-scan animations into 30-fps interlaced video.

Interlace problem with Final Cut Pro

Hi,
I have been using Final Cut Studio now from September and I am still learning things. I still have one problem that is persistent and have not found a solution anywhere, not in help or anywhere:
- I shoot my videos with Canon EOS 5D mark II DSLR at 1920x1080 30p.
- I want to keep the resolution and 30p, with no interlace spoiling the image
- I have been recently successful avoiding the disease called interlace, however now I started trying out the SmoothCam filter and each time after using it my image is ruined with interlace. It is in the rendered video as well, no matter if I use Compressor or FCP Quicktime conversion to render, despite I have selected 1920x1080 30p as output.
This is very aggravating because I don't want to know where the interlace is needed since I have no displays that would support interlace and don't know anybody who still would have (everybody is using FullHD something, so I try to create FullHD progressive content only, no tube television support of any kind is desired).
Here is a short example video how the FCP forces interlace. Look at the eyes on 1080p display:
http://www.katix.org/karoliina/media/aki.mov
Everything in my chain is 1080 30p progressive. I don't have anything interlaced anywhere. Still after smoothcam rendering the result ends this crappy. How can I fix this or is this a bug in the software?
Karoliina Salminen
Finland

I can't answer the question about MXF.
To the second question, are all parts of the FCS suite inside the top level of the Applications folder?
You must not rename, move them elsewhere or place them in a sub-folder. The updater will not see them.

Problem with interlacing when exporting with Media Encoder CS 5.5

It seems that when exporting a Video with interlacing in Premiere 5.5 with Media Encoder 5.5, the exported video is still interlaced although it is rendered with progressive settings. When rendering with the same settings through Premiere 5.5 without Media Encoder 5.5 (Button "Export") it is correct and progressive.
I tried this with H264 and MPEG2. Anyone experiencing this problem too?
Thanx!

Were the field interpretted correctly in the first place? Even if you think they are, try reversing them. I've just been through hell doing something similar with a mishmash of client material from around the world.
In some instances I switched field order (In the File>Modify) although it didn't seem logical. In others, I used AE CS5.5 to added the Reduce Interlace Flicker filter.

Will LaCie D2 QUADRA with firewire restore my apps back onto my MacBook Pro if I upgrade to Lion and then restore from the external drive?

I ordered the disk to update to Snow Leopard. Did that so I could get the App Store. Did that so I could download Lion. After I installed Lion my MacBook is super sluggish. Takes like 6 seconds just to open a drop-down menu in Finder.
I have been backing up. Will LaCie D2 QUADRA with firewire restore my apps back onto my MacBook Pro if wipe my drive using the USB Lion OS stick (which I think I'll have to buy even though I downloaded the new OS online)? I have been plugging my laptop into the Lacie drive set on "auto" and it's been working great.
One Genius said yes "you will get everything back" but my Mac buddy says "say goodbye to most of your apps". Then a guy at the university I asked "do you have a disk image". And I said "what the **** is a disk image?".
Is the problem that I installed an OS on top of new OS without wiping the drive? Or, is my MacBook Pro too old? Do I need to buy a new one?
15-inch, Late 2008
Processor 2.4 GHz Intel Core 2 Duo
Memory 2 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
Software Mac OS X Lion 10.7.3 (11D50b)
Any help?

SA will indeed transfer accounts, files and apps at first start. Can do so even faster if you clone the internal HDD onto the external (just split into a partition large enough to contain it) and then use it as the source. Probably faster than Time Machine too. The safest and quickest way to do a disk image or clone is using CarbonCopyCloner (free), and it will preserve the Lion Recovery Partition too.
Since you'll have to re--download the Lion installer again, note that you can concoct your very own Lion Installer USB Stick with it prior to reinstalling and not have to pay for the Apple-branded version. See Kappy's tutorial: https://discussions.apple.com/thread/3786371?tstart=0
As for the sluggishness, I believe that a great part of the cause is that you only have 2GB RAM. Don't know if your Mac can take more but try at least to get to 4GB, if not 8GB. Should attempt this before messing with the reinstall, as this may get you what you want.

I have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

i have a problem with my MacBook Pro is the almost of my app not working at all like a app store and terminal and other important apps please if u can help me as fast as you can cuz i don't wanna format it that's why am on Mac now not win ?

Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

NO profiles on Windows 8.1 Pro with Media Center?

Hello,
We have one desktop and on laptop running windows 8.1. We purchased two copies of Microsoft Windows 8.1 Pro Pack and upgraded them to Windows 8.1 Pro. After joining the domain, it seems to be working fine for one day. Over the weekend,
the user tried to log back on, it doesn't have any profiles. Do a Ctrl+Alt+Del, there is nothing to enter the username/password. It just have the left arrow. When clicking on the left arrow, it goes back to the screen that says "Press
Ctrl+Alt+Delete to sign in." We have run chkdsk /f and look at the profile list in the registry and they look correct. The only way to look in is using Safe Mode. We have disable all the non-MS services and startup items and
still have the same issue with NO profile and cannot log in.
Also, in Safe Mode, we were able to leave the domain but still have the same issue.
We have system image and try to restore it, it says something about not having an admin account. Seems very strange since there are two admin accounts.
We have other Windows 8.1 PRO (with NO media center) workstations joining the domain and do not have this issue. This seems to happen Windows 8.1 Pro with Media Center upgraded from 8.1. We could reformat the drives and reinstall everything but
it happens twice on one computer an once on the laptop. It will probably happen again.
Created new admin accounts, and enable the default administrator account but still cannot see anything in normal mode.
Does anyone know how to fix this issue and know why this happened?
Thank you!

Hi,
Did you mean the sign in input box without problem under Safe Mode?
If yes, sign in with one administrator account to create a new administrator user in safe mode, and then boot into normal mode to check the result.
If it could sign in the new user without problem, follow this guide to fix your another user profile.
Fix a corrupted user profile
http://windows.microsoft.com/en-in/windows/fix-corrupted-user-profile#1TC=windows-7
If you have no any administrator account, no method unless do an in-place upgrade installation to fix:
This article applied to Windows 7 is a reference for you:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Karen Hu
TechNet Community Support

Changing From Windows 8.1 PRO with Media Center To Just Windows 8.1 PRO

Hi,
I am trying to convert my windows to Windows 8.1 PRO from an unactivated version of Windows 8.1 PRO with Media Center (a free trial I got when I purchased my computer that expired). I am having an issue where it says to "Activate Windows."
I purchased a Windows 8.1 PRO key and when I try to enter it into the "Activate Windows" under PC settings, it tells me that "This key can't be used to activate this version of windows." What do I do?

Check with MS activation support : http://support.microsoft.com/kb/950929
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Upgrad from Windows 8 Pro on Windows 8.1 Pro with Media Center!

Hello,
I did upgrade from Windows 8 Pro on Windows 8.1 Pro with Media Center. Now the problem is when I press on any file with the right mouse button is normally open curtain menu, but when I press on any folder, right-click, the system crashes after a few seconds
and back up.
Best regards!

Hi,
Go Start>Control Panel>Administrative Tools>Event Viewer and scroll through the logs for System and Applications to see if anything shows up in red as Error or Warning.
Meanwhile, going to HKEY_CLASSES_ROOT\Folder\ShellEx\ContextMenuHandlers
in regedit.exe, backing up the whole ConxtentMenuHandlers folder, and then start deleting all of them one by one and continuously testing the right click. Of course import the Context folder after you find it, test once again by right clicking
to make sure you found the problem, and delete the file that caused the problem.
Karen Hu
TechNet Community Support

Timeline progressive with media interlaced - Pro App?

Similar Messages

Maybe you are looking for