Timeline viewer problems

When I watch my project in the timeline viewer it doesn't play properly, it skips sections and stops. It's impossible to do anything but it works fine in the clip viewer.

It will be interesting to see your system configuration. I think it is a question of processor capacity with iMovie requiring a little more in the timeline viewer.
It will perform better if you also minimise the number of applications running at the same time.
In any case I'm sure it will be fine when you export it.

Similar Messages

Can't see clip preview in clip or timeline view

This may be a simple problem, but I am brand new to this. I am making a movie out of photos, and the process seems simple. I drag a photo from my iphoto library (from the photos pane) into the clip view (or timeline). The image is imported and the movie looks correct when played, but in the clip (or timeline) view below all imported clips are just black. So I can't really easily edit the clips because I have no idea which one is which (besides looking at the filename!). The images I am importing are jpegs and like I said it has no problem playing the movie correctly I just see what I am working with in the clip view. Any suggestions?

Welcome to the forum!
The image is imported and the movie looks correct when played, but in the
clip (or timeline) view below all imported clips are just black.
Very strange.
To make sure we understand what you see... The imported image plays okay on the timeline after it's imported, but its thumbnail in the timeline is black. Instead of the thumbnail showing the imported image, the thumbnail is black. Correct?
Does the imported clip play black too?
The only thing I can think of that makes a clip play black is when the Ken Burns Effect is set to pan above/below the image or left/right of the image. Then, instead of importing the image, Ken Burns imports the black border along one side of the image.
To unset the pan so Ken Burns is centered over the image, do this:
1. Click on any image in the iPhoto library.
2. Turn ON the Ken Burns checkbox.
3. Click in the "Start" half of the Start/End thingy.
4. Drag the zoom slider (the slider with the small/large face profile) a bit to the right, then all the way to the left.
5. Click on the "End" half of the thingy and repeat #4.
Now the import is centered. If the pan was causing the problem, that should fix it.
Karl

Audio tracks missing in the timeline viewer

Hello,
I am using Imovie 4.0.1 and have been working on a project for several months and now towards the homestretch, I have lost the ability to see the audio tracks that I added to the project. I am referring to the 2nd and 3rd tracks on the timeline viewer. This isn't a killer as I have completed all of my editing and am ready to export it to my camera (to then reimport, seperate audio, and then lock--to make sure audio and video matches up) The problem is that when I export to the camera, the audio comes and goes, and some of the video stutters at times. It seems that this all might be related. Has my imovie become corrupted? All of the projects that I have worked on in the past--that are still on this computer--exhibit the same thing i.e. I can't see the audio tracks and the editing arrows (and other items) have disappeared from underneath the viewing area.
I would appreciate any help.
jg

com.apple.imovie3.plist is what you should have found because you are using imovie 4.
And, a new .plist should have been made by imovie when you re-launched it-so that's OK.
Sounds like you have enough HD space...are you sure you are using the Timeline viewer and not the Clip viewer?
The Clip viewer looks like this:
And the Timeline viewer looks like this:
(But these are screen shots from imovie 5 so don't let that confuse you).
Sue

CS4 - scroll timeline view to playhead

I am in process of updating my systems from PPro2 to CS4.
With the timeline selected:
I mark both in and out points in the timeline. I use the hot key for "Go To In Point", then zoom in and the timeline view stays centered on the in point, moving the out point outside of timeline view. If I use the hot key for "Go To Out Point" with the timeline selected, the playhead disappears as it moves to the right but the timeline view does not follow... it remains at the in point.
With the Program Monitor selected:
If I use the "Go To" buttons on the Program Monitor, the zoomed timeline view does jump to the playhead position as expected.
Also If I have the Program Monitor selected instead of the timeline, the hot keys for the "GoTo' functions work as expected and the zoomed timeline view does jump to the playhead.
It appears that with the timeline selected, a hot key command to "Go To' in or out does not scroll the timeline view as in PPro2.
Am I missing something?

It appears that with the timeline selected, a hot key command to "Go To' in or out does not scroll the timeline view as in PPro2.
Sad, but true. I've taken to slapping the Space Bar twice to get the zoomed-in timeline view to move to general vicinity of the outpoint, after using the Go To Outpoint key command. Very annoying. It is a bug, I would say, so be sure to file a bug report. Not likely we'll see another update for CS4, but perhaps they'll see fit to rectify the problem for CS5 (or 6...).

Timeline view restrictive on the end of the movie

Hi Folks,
I love Imovie and have been working with it for just two weeks. However, I am frustrated by how little room the timeline view gives you to work with on the right hand side. Meaning, the last clip bumps right up against the end of the timeline instead of leaving you a little space to put in your next clip or transition. Anyone know how to give yourself more room to work with at the end of the movie timeline?
Thanks in advance
IMac, 17" Mac OS X (10.4.6)

Hi kloeffert:
Welcome to discussions.
I guess I have never seen that as a problem.
Unfortunately, there is no way to show anything past the end of the timeline, but you can switch over to the "Clip-View" instead of "Timeline View". That way you will be able to see farther down.
Sue

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Maintenance view problem "No data maintenance Authorization; Display only"

Maintenance view problem
Question 1>>>>
> I have created a table with Display/maintenance allowed and technical setting Data class - APPL0 (master data, transparent tables).
>> Then I have created a maintenance view thought utilities->table maintenance generator where i have specified the Authorization group as &NC& (w/o auth. group)
->and also created a function group and specified in the maintenance screen-> I have selected maintenance type as one step-> i have given the overview screen number->and in Recording routine i have selected - no, or user ,recording routine.
>>> Now when i go to transaction SM30 and put the table name and press on maintain button I get a information box saying "No data maintenance Authorization; Display only".... and it only displays the data.
my problem is I want to enter data through maintenance view (SM30).
2nd Question >>>> once i create a function group for maintenance view how can i assign a transaction for this. (as if i do it as we do for a module pool program it gives me error)Thank you.
kailash

SE93. Enter a transaction name. Create. In the pop up enter a title and select 'Transaction with parameters'.
Next screen fill the following;
Transaction 'SM30'
Check 'Skip first screen'
In the table control at the bottom of the screen
Name of screen field 'VIEWNAME'
Value <your table name>
Name of screen field 'SHOW'
Value 'X'
Save.
Job done.

Adobe Content Viewer problem. Please Help me...

Hi after updating online. Folio, I tried to update the trial version of the publication on my iPad but I get this message: "the issue isavailable for dowload, but new signing for an application version. Update the application from the App Store. "I went to the AppStore and was not any update of the Content Viewer ... I deleted the version on my iPad I downloaded again ... but without success gives me the same problem ... Please help me ... how can I do??
thanks

Hello Bob and thank you for responding so quickly ... Would you be kind enough to send me the link where I can download older versions of Folio Builder and Folio Producers Panel tools for InDesign 5.5. I'm looking for them but I can not find them.
Thank you for your patience.
Il giorno 21/gen/2012, alle ore 16:18, Bob Levine ha scritto:
Re: Adobe Content Viewer problem. Please Help me...
created by Bob Levine in Digital Publishing Suite - View the full discussion
As discussed in numerous threads already, the new viewer has not been approved by Apple yet.
If you’re a pro or enterprise customer you can create your own viewer app. If not, you’ll have to wait or roll back to the older tools.
Bob
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4155907#4155907
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4155907#4155907. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Flash Player viewing problems

I'm having full screen video viewing problems on facebook which I hope to get resolved.When selecting a video to view on Facebook the video goes to about a 2" high strip across the bottom of the player. When this happens I have to click the full screen icon on the bottom right corner of player to view the video, so far this problem is only happening on FB. I would like to know what's causing this problem and how to get it resolved. I've got the current player version and all my Computer Software and Drivers are up to date
My System Info
Gateway Laptop
Windows 7 HP w/SP1
IE11
Flash player current 15.0.0.233
Norton 360

Yes, it says it is enabled:
Name:
Shockwave Flash Object
Publisher:
Adobe Systems Incorporated
Type:
ActiveX Control
Version:
10.1.82.76
File date:
Date last accessed:
Today, March 08, 2012, 20 minutes ago
Class ID:
{D27CDB6E-AE6D-11CF-96B8-444553540000}
Use count:
24711
Block count:
0
File:
Flash11e.ocx
Folder:
C:\WINDOWS\system32\Macromed\Flash

My illustrator CS6 is having screen viewing problems. Everything is blurry

My illustrator CS6 is having screen viewing problems. Everything is blurry

All files look almost as if they are in a draft mode. Doesn't matter witch file I open they all look the same. but very thing is printing out fine. Also I tried creating a test user and down loaded the trial version and it works fine.

Cover Flow view problems

Hello Everyone and congratulations for the Support Forum!
I am experiencing Cover Flow view problems since I installed iTunes 10 on my windows based laptop.
I here enclose address of a picture to let you better understand which the problem is.
http://img684.imageshack.us/i/itunescoverflow.jpg/
I kindly ask you for providing a solution on the issue.
Thanks and Regards,
Antonio

Hi,
I found the solution here : http://discussions.apple.com/thread.jspa?messageID=12623727&#12623727
I rebuilt my library...
Enjoy :-D

E 63 Youtube viewing problem

E 63 Youtube viewing problem.
When i click on the youtube movie clips first Real Player opens for a second and then it shows
First tries to connect.
"Unable to connect" after that it shows
"Rtsp Temp" not saved. Save now? and gives a Yes and No option.
If you press Yes , it shows saves to Galary
If you open the Galary u will find the file is saved in Galary Stream links.
When u try to open it, it says Define defaulat access point and stops.
Please let me know how to solve this.
Regards,
Chritopher

i had this on my phone
try this
go to menu > media > real player > options > settings > streaming > network > default access point
change it to the access point u would use to connect to the internet
u will have to keep changing this option if u plan to use different wlan connections
if my post helped u out, please click the Star next to it to add some KUDOS to my name

Open in Timeline-how to return to timeline view?

If you select a clip in the timeline and want to see it in close detail, you can right-click to open a menu of options that include "Open in Timeline." Once there, you are seeing a complete view of the whole clip with the trimmed section clear and the ends grayed down.
But this has me stumped. How do you jump right back to the full Timeline edit view? That menu has no ability to return you from whence you came. I have to click on the Project Library, select the current edit again and only then does it open the regular Timeline view.
I can't find anything in the scant Help document and "Open in Timeline" doesn't find anything here.
Any clue as to how to dismiss it?
Escape doesn't work. Undo doesn't work. Well, it does, but it undo's any changes I make, first. None of the other ideas in that drop-down menu seem to help.
Is this a left turn into a one-way cul-de-sac?

Thanks a bunch.
Is that hiding in the docs somewhere?
I found an alternative. Command+0 (zero), twice makes a round trip to the timeline index.

Where is timeline viewer mode in iMovie 11 like iMovie HD?

I only have clip viewer mode? Where is timeline viewer mode in iMovie 11' like iMovie HD? for audio and video timing I would just click on the clock symbol. HELP?

Hi
Bad news - There are non (Exactly as in iMovie 1 to HD6 or FinalCut)
Good news - There are sort of - at least project is presented in ONE row.
• Click on a specific iMovie PROJECT
• In this window - top right hand there are two small symbols - one blue three squares and one with two brown red symbols. Click on the three blue squares one.
• to get the Audio - under this there is a small wave like symbol - Click on this.
But still this view has so many quirks that a person familiar with iMovie 1 to HD6, FinalCut, Adobe Premiere and Avid can feel a bit of serious frustration. (at least I do)
Yours Bengt W

How do change the timeline view in PE9 to see all frames?

In PE9 I notice that many frames in timeline view appear blank. at the clip transitions the frame have images. How do I change this to see all the frames? In PE 2 I never had the "feature". I assume that most are blank to reduce file handling,etc. But I'd like to toggle the frame images on/off on command.
p.s. when I imported a short 8 munutes series of clips direct from my HD sony camera the timeline frames were complete... but most video i'm using is old anlaog tape conversions to DVD...than dvd files imported for PE editing.
thanks
david

I was only half-correct. In PrPro, there is a drop-down menu, while in PrE, it's a toggle through the three possible display states:
Sorry for that, and good luck,
Hunt

Timeline viewer problems

Similar Messages

Maybe you are looking for