Timeline Window will not adjust, fills ENTIRE screen, help please?

All of a sudden my timeline window FILLS my screen and I cannot get to the bottom of the timeline to adjust the size. It has tons of extra grey space on top of the video tracks, and tons of extra space below the audio tracks. It makes editing difficult as I cannot move along the timeline or anything. I wish I could attach a screenshot. Basically just imagine the timeline window extending the ENTIRE size of the screen, with no way to make it smaller. Help!

Trash your preferences
http://www.fcpbook.com/Misc1.html

Similar Messages

  • AMDS WILL NOT INSTALL!!! HELP PLEASE

    Hi everyone,
    Thanks for looking. Any thoughts would be greatly appreciated.
    -iTunes 9.0.2
    -Windows 7 Professional 64-bit
    -2 iPod Touch (Late 2009) v 3.1.2
    I am unable to get Apple Mobile Device Support to install on the computer. I have tried downloading the drivers for AMDS from outside websites and unzipping them into the correct folder (C>Program Files x86>Common Files>Apple) but unfortunately even unzipping this to this location does not help because of the fact that I have not merged them into the reg edit. Don't really want to do that because of the risk of dumping the whole computer. I saved the setup64.exe to the desktop and attempted to install as normal, compatibility mode(as Windows Vista w/SP2, as Admin), and in safe boot. None of which will install the AMDS. I have also attempted to install 9.0.1 64-Bit with the same luck. I have spent about 8 hours in all trying to get this work. When I attempted the install as normal the iPods were not recognized, but when I installed in compatibility mode the iPod was recognized as a digital camera in computer and device manager as a USB Mass Storage Device. So I went into Start>Control Panel>Hardware and Sound>Auto Play>Choose Take no Action, But the device still shows as a digital camera in computer because of course there is no AMDS. If i go into device manager and right click the device and select update it says the best device drivers are currently installed. Have also put the iPod touch into recovery mode and it will pop the new driver software bubbles in the bottom right but then it displays that the device drivers were not installed correctly and the more details sections advised you that the drivers did not install because AMDS is not currently installed. I think I'm at the end of the road here and thoughts would be greatly appreciated. Thanks again.

    Bump...Help Please?

  • Itunes Store Will Not Open!!! Help Please

    Hi everyone, I am having trouble trying to open my iTunes Store, whevever i click on it a msg keeps coming up saying, "iTunes could not connect to the iTunes Store. The network connection was refused. Make sure your network settings are correct and your network connection is active, then try again." I have tried everything to fix it but it is not working, it is not the internet connection because i am on the internet now, I HAVE NO IDEA, please help.
    Thanks
    LG   Windows XP  

    Hey everyone I was having the same problem but apple sugested to completely remove itunes,quicktime and also any ipod software my computer. Not just doing an uninstall will fix the problem yu having to also go into program files and remove anything in there as well. I just did a search on itunes and quicktime and ipod and deleted all the file except the ones that say itunes libary. And then you restart and download latest itunes. and it worked I could get into the itines store again WOOO HOOOO. But wait it only lasted until the following day. since about an hour ago I am having the same problem as before. GRRRRRRRRRRRRRRRRRRRRRRRR Not happy and if you think it is just Windows it is not cause I have a friend running same on MAC and same problem.. Lets see if apple pull the finger out and fix this annoying problem...... so far they will not admit there is a problem.

  • My satelite L455-S5975 will not restore using restore discs Help please

    I have a L455 that I tied to restore to the out of box state using the internal restore partition.
    After starting the process mid way I received a fatal error message and the computer now doesn't reboot past the windows 7 icon before displaying another error message and only allowing me to shut the system back down.
    I called the help line and they said it sounded like my hard drive crashed.  I then ordered the restore discs from Acclaim and was told that after installing a new hard drive these discs would get the system back up and running and back to factory out of box status.
    I ran the discs and towards the end of using the second recovery disk I received another error.
    this was using the new hard drive.
    I tried this twice and it didn't take.
    I then put the old hard drive back in and started the restore process again.
    I received this error mid way through the second disk.
    10-FC12-0241
    after selecting the o.k button to shut down I received this error
    F3-F200-0002
    again I selected the o.k. button to shut down and it did but still will not start up past the windows 7 logo.
    Any idea what the issue is or what the error codes mean so that I can get the computer back up and running.
    Thanks
    Jason

    Assuming your install media isnt damaged and your hard drives are good, in order of most problematic to least, you could have an issue with your motherboard, CPU, RAM, or optical drive. 
    Optical drive: attatch an external optical drive (USB) and try to install from there.
    RAM: If you have multiple DIMMs, pull all but one and see if it goes. If it still doesnt work, try the other one.
    If you only have one DIMM module then you can either swap it out or run a full memory test using MEMTEST86.
    CPU: Obtain a replacement CPU and replace it.
    Motherboard: time to buy another computer.

  • I'm new to Mac, I recently downloaed steam for my husbands football manager game, having run ok for a few weeks it will no longer allow him to start up his game.I got help once it worked once but will not again....help please!!

    We're retired,new to IMac, I downloaded Steam for my husbands football manager 2011.It ran successfully for few weeks, but now will not allow him to start up his game.I got help from the mac team and it worked for one day but again has the same fault....help please

    Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
    If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
    http://www.etresoft.com/etrecheck

  • Everything I download will not open... need help please

    I just got my iMac G4. It is used but for the most part works fine. But I am having problems downloading. The internet explorer that was on it was not loading right so I was told to download firefox. I downloaded it everything went smooth until I tried to open it. It flickered and then nothing. I tried reinstalling my Mac OS X 10.2 but that changed nothing. So I tried downloading a few different games to see if it was just the firefox ap. But everything I tried downloading did the same thing. I checked all the system requirments and everything matches up fine.I don't know what else to try. If anyone can help it will be greatly appreciated. Thanks

    I am using my husbands pc to get on here. My mac will open everything that was already installed on it. All of the applications open fine except internet explorer. It only peices parts of ech web site together. It still logs onto the internet just halfway loads all pages and some pages will not load at all. So My grandpa suggested firefox. But my problem is not firefox anymore. its that nothing will download right. I downloaded the application it went through the install process correctly and popped onto the desk top. I copied to my applications folder like it said. when I was done downloading I double click the icon to open and by flickering I mean it shows a square outline as if its about to open but the the outline disappears and nothing else happens. I can redownload all day anything but the same thing happens everytime. And I know the 10.2 version is older so I have been downloading what will work with the 10.2 But I also have not touched a mac for over 6 years so I don't intirly know what I doing anymore. I hope that helps a little. Here are all the stats that I know about my computer... System version Mac OS X 10.2 (6C115) Machine speed 700 mhz bus speed 100z Boot ram info 4.4.1f1

  • Premier Pro 5.5 - Sound will not resume after pausing video - HELP PLEASE !

    Hi everyone.
    I have a co-worker that is having a very strange problem. After he pauses a video and tries to restart it, video works fine but the sound will not resume. This doesn't happen all the time but it does happen often.
    Please help.
    Here is the system specs:
    MacPro 2.6 Xeon
    8 GB RAM
    Kona Capture card
    OSX 10.6
    Thanks for you contribution.
    JC.

    Hi Todd.
    I just finished running all the updates for adobe and it did not find any updates for Premier Pro, so the current version I have is 5.5. I'm going to check to see if there is any update I can download from Adobe that is not been detected by adobe updater so I can upgrade to Premier 5.5.1.
    Thanks Todd.

  • Canon ip4700 amber lights blink 5 times will not print, 4 years old, help please

    Canon ip4700, amber lights flash 5 times, printer will not print, any advise appreciated

    This issue has been resolved - my Support Advisor, Edgar, was able to discern what was causing the problem.
    It appears that, despite years of never experiencing this, one of the latest ipod updates actually altered my device's personal settings and changed it to "Manual" for all synchronizing; even performcing Factory Restores did not change it back to being automatic.
    My ipod is working as good as ever now thanks to Edgar. If anyone else is having this problem, please make sure you check your device's settings in iTunes and see if "Manual" is checked - even if you never changed the settings yourself and have no reason to suspect that to be the problem, as was the case here. If it is checked - uncheck it to enable automatic syncing.
    So relieved this was not a much more serious problem. I've missed having my music on the go. Thanks, Edgar!

  • Since updating to this new version my facebook game farmville will not work properly can you help please

    i have farmville on my facebook page.since updating to this new version of firefox it will not load certain things from farmville.can you please advise

    Hi
    Are you still facing the same error ? If yes, are you getting this error everytime you are trying to export ?
    Please try again and check.
    This is basically a compilation error , where files are not converted into proper format correctly.
    Thanks,
    Sanjit

  • My iPad will not download aps can anyone help please ?

    Hi can anyone help, my iPad will not download aps ?
    Just keeps saying unknown error ?

    I have tried signing out and back in again, no joy. I have also reset the iPad as suggested. Desktop and 2netbooks are working fine on the wireless connection. Apps won't download, initially I was able to disconnect from wifi and reconnect and that would solve it but not anymore.
    I am also getting an error message intermittently advising no Internet connection. This is all since the upgrade to 5.1.1 so it has messed with something.
    From a google search looks like I am not alone either.

  • My firefox will not open up at all help please?

    My firefox will not open at all I even tried to uninstall it to reinstall it and it won't let me uninstall either nothing works on it Please help I love my firefox

    This first thing that comes to my mind is that the battery is completely drained. But you say you left it plugged in to charge over night. Was the iPad plugged in to the charger or to your computer? If it was connected to th computer try plugging it into the wall charger. Wait 30 minutes then reset the iPad. Press and hold both the Home button and the Sleep/Wake button continuously until the Apple logo appears. Then release the button and let the device restart. You will not lose data doing this. It's like a computer reboot. But it the iPad was plugged into the wall charger overnight and it still doesn't respond, the iPad most likely has a hardware problem Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • I'm using an iMac running OS X 10.9.2 and since i installed mavericks my iPhoto will not open.  Can anyone help please?

    my iPhoto will not open since I installed Mavericks.  Can anyone help with this please?

    Do you have one of the versions that are shown here with the forbidden symbol over them:
    If so you'll need to upgrade iPhoto to 9.5.1 from the App Store.  It'll be a free upgrade.
    OT

  • My firefox browser window will not stay in full screen mode, it keeps reducing itself so I can't use the scroll down button on the side, so I have to constantly minimize and maximize to get to the scroll bar, How can I stop this?

    Like I said it happens every few minutes... It is annoying when you are on the internet for more than a few minutes because you constantly have to either minimize it or reduce the screen manually by hitting the button and then maximize it again to get the scroll bar to be in view to use it.

    Delete the localstore.rdf file at the following location:
    C:\Users\'''USERNAME'''\AppData\Roaming\Mozilla\Firefox\Profiles\'''PROFILE NAME'''
    I did this and it fixed it for several days, but it broke again eventually.

  • Firefox window will not adjust in size, the window is either Maximized or no window displays.

    Environment is Windows XP Professional.
    Opened Firefox (3.6.8) and an icon displays on the task-bar, but no window.
    Rt click on icon and options are "Maximize" or "Restore". Clicking on either produces a full locked window. Cannot re-size or drag by top bar.
    Clicking on the "Maximize" icon in the upper right corner of the window and the window disappears. Window may be reopened by a Rt click on the task-bar icon and selecting "Maximize" or "Restore"
    Opened another session of Firefox at the same time, and a small window (as small as it can be) appears in lower left corner. Can be re-sized, "maximized" and "un-maximized" and appears to be normal.

    Need to add that PC was rebooted multiple times, and error occurred each time Firefox was started up, after the reboot.

  • Windows 7 64 Bit system will not update to iTunes 7 - Help please!

    Hello -
    I've been trying to update my iTunes since July and have been unable to do so. I think the last time I installed a version of iTunes was in May. I've tried everything and anything I could find on the web but nothing works!
    I have a Windows 7 PC 64 bit laptop.
    Everytime I try to update I get the error message "the installer encountered errors before the installation could be completed".
    I've already tried:
    - Downloading directly from apple site
    - Downloading the update only then installing
    - Made a new user account on my computer to try install
    - Uninstalled everything and started fresh
    - Disk Clean up's
    - Turned off Anti-Virus
    - Restarting computer and more...
    Does anybody have any suggestions!? It's driving me crazy not being able to sync my iphone 4! I'm starting to think it's just not compatable...
    PS - I am able to install older version of iTunes, but my iphone 4 is not compatable since i've upgraded to iOS6

    Hi rrfhp,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand none of the HP drivers will fully install.
    I will be happy to help you.
    Are you signed in as the Administrator of the computer?
    I would turn off all start up programs to make sure there isn't something blocking the printer.
    Click on start, in the search box type in run, enter, then type in msconfig, click OK.
    Click the Services tab.
    Click to select the Hide All Microsoft Services check box.
    Click Disable All, and then click OK.
    Then click on the start up tab at the top.
    Click on disable all.
    Reboot the computer.
    Temporarily turn off any Antivirus software.
    Then run the installation again by right clicking on the setup and selecting run as Admininstrator.
    Don't connect the USB cable until prompted.
    Try printing now.
    Then go back into msconfig and enable the All Microsoft Services and enable all on the start up tab.
    Turn the Antivirus software back on again.
    Please let me know the results if you are still having issues.
    Are you getting any error messages?
    Thank you for posting on the HP Forums.
    Have a nice day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for

  • Error in Module pool:Function code

    Hi All, I am using IW52 transacion for which I have activated the Screen exit and inserted table control on it. The table control entries has to be deleted for which I have added a Delete button with function Code 'DELE'. When trying to delete the en

  • Creating a web service for F4 help

    Hi All, I want to create a web service that I can consume using JavaScript and thus can integrate with normal HTML web site. I want to achieve this by two ways Pass table name and field name to the service and it will return the default search help I

  • Workforce Planning "Status" Formula

    In Workforce Planning, the "Status" formula has a couple of lines that don't make sense to me. I'm wondering if anyone knows what this code is trying to accomplish. Here's the member formula: IF (@ISDESC("New Employees")) IF ("BegBalance"->"Start Mon

  • How to view the code in MV5AFZZ

    hi, i want to view a code from user exit MV45AFZZ, because i have to restrict list of customers basing on account group and sales area. regards, balaji

  • Contact Form misaligned

    Published test site. Contact form misaligned on page. Chrome and Safari. Need fix for client review. Solutions??