TimeMachine leaving out virtual systems

During backup I wondered that it was so fast. Cant be since I have worked with and therefore edited several 10GB plus virtual systems. So i checked the files at the TimeMachine Drive vs. the iMac-Disk, user/Tom/virtualBox VMs.
It seems the TimeMachine is not backupping Virtual Box systems, only their folders. This is not a file size issue, the files since as well the big .vdi as well the smaller vbox / vbox-prev files are left out during backup.
Any idea what went wrong and how to fix it?

Hi Jan
please see:
http://help.sap.com/saphelp_smehp1/helpdata/en/9c/efa9068cce4149a40d7991ad2113f3/content.htm
Goto SMSY
Systems
Select your SAP XXX (like SAP ERP or SAP Netweaver)
Click on your SID
On the right hand side you go to the tab "Header Data"
Here you can aktivate planned or production
If you are unable to see the planned button that this is because your setting for data source is not set to manual.
Than please click on the button "Other object" (SHift + F5), for System enter your SID and click on the lock "Set Datasource to Manual input CTRL+F9)
This will set your SID-System to manual adjustment - just confirm.
Than you can mark your system as planned
You will be able to add clients manually yes.
regards
Nesimi

Similar Messages

Virtual systems in SMSY? (Change Control Mgmt. & Change Request Mgmt.)

Dear all,
We plan to implement Change Control Management (CCM) and Change Request Management (Charm).
At the current stage of the project, we do not have all satellite systems ready (e.g. production system is missing, Dev and QA are setup).
Nevertheless we want to start setup of Charm and CCM.
We understand that we have to "register" the missing systems in the STMS as virtual systems.
But how do we do that in the SMSY?
Do we enter the data manually? or can we "load" the data out of the STMS?
And what are the typical traps and errors we can make (i.e. hopefully avoid making). Anyone to share his/her experience?
Thanks and Regards,
Jan
Edited by: Jan Krüger on Jun 30, 2009 9:34 PM

Hi Jan
please see:
http://help.sap.com/saphelp_smehp1/helpdata/en/9c/efa9068cce4149a40d7991ad2113f3/content.htm
Goto SMSY
Systems
Select your SAP XXX (like SAP ERP or SAP Netweaver)
Click on your SID
On the right hand side you go to the tab "Header Data"
Here you can aktivate planned or production
If you are unable to see the planned button that this is because your setting for data source is not set to manual.
Than please click on the button "Other object" (SHift + F5), for System enter your SID and click on the lock "Set Datasource to Manual input CTRL+F9)
This will set your SID-System to manual adjustment - just confirm.
Than you can mark your system as planned
You will be able to add clients manually yes.
regards
Nesimi

Virtual system Name

Hello Friends,
We are doing EHP4 upgrade in our production system. Our production system is configured as follows
Example
Physical System: ABC
Virtual System:XYZ
Now the scenior is as
1.)When we log in to XYZ it goes to ABC . and when we log in to ABC it goes to ABC.
2.)the Profile - START and INSTANCE profile .
Its for the virtual system XYZ
and the Physical system is a soft link to this virtual system.
My query is
1.) What different approch should we take during the upgrade.
2.) I just started the upgrade and in the initial screen of INITIALIZATION we get the error that the
UNABLE TO DETECT AN ABAP AND/OR AS JAVA INSTANCE OF THE SAP SYSTEM ON HOST ABC.
Please Suggest
Anthony

Hi
For the issue encountered in Initialization phase of upgrade:
1. Ensure to download the latest EHPi tool from the service marketplace.
There were recent corrections to instance detection.
2. Make sure, the naming conventions for profiles are followed
as explained in SAP notes
96317 Host names during R/3 upgrade, tips & tricks (section 4)
962955 - Use of virtual TCP/IP host names;
23538 Problems due to inconsistent host name notation
3. Cleanup the profile directory and only leave the actually
used profiles in there. Move old profiles to a backup directory.
4. Use the niping -v command to verify the hostname used by the
system.
5. Make sure old instances of EHPi are not running any more.
Kill old EHPi processes as necessary.
6. Also add two parameters to the instance profile:
saplocalhost and saplocalhostfull
Regards,
Aidan
Edited by: Aidan McKiernan on Nov 3, 2010 10:28 AM

Deleting files out of system preferences desktop background.

Does anyone know how to delete files out of system preferences>desktop & screen saver?
Some how when adding one photo to the file for the desktop background it took the entire photo file. So that instead of one photo for the file it has over 200 now. Read everything and tried everything. Still can't figure out how to delete that file from the list.
I know how to add photos or whatever to use as desktop background just no idea how to remove them from the list.
Any ideas?

Doug,
When you go to system preferences>desktop & screen savers>desktop. On the left is a window with the names of the images listed. Apple Images, Nature file, Plants file, Picture Folder, Choose Folder and so forth. The ones that come with Apple products. Not sure what all else is native to Apple.
Iv been using my own desktop background since the day I got the iBook. Normally I just get one photo or image and more it there to use. But, last week I did something different or wrong. Maybe holding a button to long, not sure. Instead of moving the one photo it moved the entire photo file. That file had over 200 (2,500x1,800 in size & over 550KB for each) and probably closer to 250 photos in it.
Way to many to be there. And I simply can't find a way to remove that file from the desktop list. I can high light it, but it doesn't delete with the delete button. I can high light it, but it doesn't change anything in system preferences banner to edit, view, etc....to remove it either. It won't click & drag to trash.
Being very careful because I don't want to delete the file and by error delete it totally off the computer. I could creat a new file with only 1 photo in it for use as the desktop background. Then try to choose that file. However, since the last big OS-X update it's been doing this. Everytime I choose a file or photo it's adding the entire file not just the 1 photo. And Iv managed to add 3 files so far to that list.
Any ideas? Thx, Mike

ICloud and Twitter are greyed out in Systems. Can't access them.

iPod Touch Model PC544LL Version 5.1 30GB
Why are my iCloud and Twitter icons greyed out in Systems?
Found the answer.

A little more info is needed. How are you trying to access iCloud (via contacts, calendar, mail app)? Also check Settings>Restrictions. Not sure if turning it on would cause this, but check to be sure its not turned on.

Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion.

Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information.
Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
The path already (unsuccessfully) taken;
Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
This did not work because the correct date was greyed out. Restore key was greyed out.

Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information.
Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
The path already (unsuccessfully) taken;
Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
This did not work because the correct date was greyed out. Restore key was greyed out.

Activate CHaRM using Virtual Systems in Landscape

Is it possible to activate a CHaRM project against a landscape that
contains virtual systems?
We currently have a Development system (DEV) with a virtual Test system
(QAS) and virtual Production system (PRD). These systems are marked as
Virtual in TMS and SMSY System Landscape. We have added these systems t
o
the Logical Components and created a new Solution Manager project and
want to activate CHaRM against this scenario. .
The TMS routes are defined with Dev -> QAS(virtual) -> PRD(virtual). Is
this scenario possible? Do the standard CHaRM activation checks (RFC's,
Authorizations, etc) get bypassed because these systems are virtual?
When activating CHaRM, we still receive the error that no consolidation
system exists for our Dev system even though the TMS routes have been
defined properly. However, since these systems are virtual, we cannot
add client information to them.
Thanks

Hi,
>
Thiago Luttig wrote:
> Is it possible to activate a CHaRM project against a landscape that
> contains virtual systems?
> The TMS routes are defined with Dev -> QAS(virtual) -> PRD(virtual). Is
> this scenario possible?
A virtual system cannot export any TR. So any request imported to QAS cannot be exported
So
>
Thiago Luttig wrote:
> The TMS routes are defined with Dev -> QAS(virtual) -> PRD(virtual). Is
> this scenario possible?
is not possible.
Hope this answers your question.
Feel free to revert back.
--Ragu

Warning: Leaving out empty argument '-windowtitle'

When I generated a javaDoc for my project I received the following
Warning: Leaving out empty argument '-windowtitle'
Could someone please explain to me what is that warning and how to fix it?
Thanks in advance

I too am generating my javadoc files from Netbeans and I get the same message. However, my javadoc is generated fine, so my advice is not to worry about it!
The documentation says:
-windowtitle
Specifies the title to be placed in the HTML <title> tag. This appears in the window title and in any browser bookmarks (favorite places) that someone creates for this page. This title should not contain any HTML tags, as the browser will not properly interpret them. Any internal quotation marks within title may have to be escaped. If -windowtitle is omitted, the Javadoc tool uses the value of -doctitle for this option.

Duplicate Finder Items, but leave out a folder

Okay, this is probably way over Automator's head, but I figure I'd give it a shot.
I have a folder (Let's say it's called FolderA). Inside FolderA is a bunch of other folders, (for simplicity let's say it's A1, A2 and A3) and those three folders have files inside of them.
What I want to do is duplicate FolderA, but leave out the contents of A3, but I still need a folder called A3 inside this duplicate FolderA. Is this possible?
So, it will go something like this:
FolderA
- A1 > Files
- A2 > Files
- A3 > Files
What I want Automator to do is duplicate FolderA as such:
FolderA copy
- A1 > Files
- A2 > Files
- A3 >

As I am dealing with very specific folder structures, the FolderA structure will always be the same. Actually, there will ALWAYS be six folders in FolderA and they are always named the same (lets say A1-A6). What I want is ALWAYS A3 to be duplicated without it's contents (the contents will be replaced at a later time with a different version of the files).
So, it will look something more like this:
FolderA
A1 > Files
A2 > Files
A3 > Files
A4 > Files
A5 > Files
A6 > Files
and dupe should look like:
FolderA copy
A1 > Files
A2 > Files
A3 >
A4 > Files
A5 > Files
A6 > Files
Does that make sense?

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

Why is the mail, calendar, and contacts grayed out in system preferences

why is the mail, calendar, and contacts grayed out in system preferences?

Your card isn't a CUDA card.
Read this in detail:
http://blogs.adobe.com/aftereffects/2012/05/gpu-cuda-opengl-features-in-after-effects-cs6. html

How can i configure STMS with out physical systems

Dear Experts ,
please solve my doubts
here i installed one system in AIX and named it as DEV system in that system i need to perform post-installaion Activities
and i started some activities also
presently my doubt is in STMS configuration
here i have only one system (DOMINE CONTROLLER) and we need to other systems while configuration but we dont have other systems like quality and production how can i configure that systems in my landscape
this is my first implementation Experience please suggest me with some valuable suggestions
my doubts:
while creating systems we need to take for virtual systems or Extended systems
which transport routes can i prefer for Dev to Qly systemand also Qly to Prd
please reply me
Regards

Hi,
If you have decided the SID's of the QUA and PRD systems then you can configure TMS with the virtual systems. Here are the steps to do so.
Login to the domain controller
Execute tcode STMS
Goto the menu overvie --> systems (Shift+F6)
SAP SYStems --> Create --> Virtual system
Enter the SID and description and then save ur entries.
Now the new virtual system will be created. Do the above for the others systems in the landscape.
Again execute STMS and then click SHIFT+F7. You will goto the transport route window. Now you can configure TMS for the systems in the list as usual.
Hope this helps.
Regards,
Varadharajan M

Where do i find cofiles/datafiles for virtual system

Hello,
Here is my setup
at our site there was a development system DEV, and a production virtual system PRD was created.
After everything is ready in DEV we make a system copy to remote production system (PRD)and need to add the transports there, as this is the real life production system. I copy the buffers, but in the cofiles/datafiles i can not find anything in /usr/sap/trans/ in DEV which is the old domain controller and holds sapmnt
Any idea how to solve this?

Dimitar
You may want to check in other directories since you inherited this system.
Also, if you are using Unix, or related OS, it may be possible that /usr/sap/trans was mounted over the local directory containing the cofiles and data files.
You may want to unmount and check locally.
Just a thoughtu2026
Hope this helps.
PJ

Firewall tab greyed out in System Preferences - have I been hacked?

Hi,
I am running 10.4.11. In System Preferences, under Sharing, the Firewall tab is greyed out, suggesting my firewall is not running or has been tampered with.
So I did some poking:
brendan% sudo ipfw show
02000 844220 100107534 allow ip from any to any via lo*
02010 0 0 deny ip from 127.0.0.0/8 to any in
02020 0 0 deny ip from any to 127.0.0.0/8 in
02030 0 0 deny ip from 224.0.0.0/3 to any in
02040 0 0 deny tcp from any to 224.0.0.0/3 in
02050 388115 29754604 allow tcp from any to any out
02060 690200 900600320 allow tcp from any to any established
02065 0 0 allow tcp from any to any frag
02070 0 0 allow tcp from any to any dst-port 123 in
02080 0 0 allow tcp from any to any dst-port 135 in
02090 0 0 allow tcp from any to any dst-port 8135-8137 in
02100 0 0 allow tcp from any to any dst-port 21 in
02110 0 0 allow tcp from any to any dst-port 500 in
12190 0 0 deny log tcp from any to any
20000 0 0 deny log icmp from any to me in icmptypes 8
65535 92033 23684897 allow ip from any to any
Does this look suspicious? I also tried:
brendan% /usr/libexec/FirewallTool
Firewall Tool: Error, sysctlbyname(net.inet.tcp.blackhole): 1
Firewall Tool: Error, sysctlbyname(net.inet.tcp.loginvain): 1
Firewall Tool: Error, sysctlbyname(net.inet.udp.blackhole): 1
Firewall Tool: Error, sysctlbyname(net.inet.udp.loginvain): 1
Firewall Tool: Error, sysctlbyname returned: -1
Firewall Tool: Error opening socket
Firewall Tool: Error 1, Error setting up V4 Firewall!
Firewall Tool: Error opening socket for V6!
Firewall Tool: Error 1, Error setting up V6 Firewall!
Should I be concerned? Am I being paranoid?
If I want to reset and restart my Firewall, how do I do that, if the tab is greyed out in System Preferences?
If I want to load a backup copy of my firewall configuration, what file do I need to copy from my backup disk? There is no /etc/firewall.conf on my system.
Thanks.

As I recall, if you do any sort ipfw stuff in command line under Tiger, that that made Sharing > Firewall gray out. Try doing a sudo ipfw flush then see if that lets you reconfigure from Sys Prefs.
This article discusses Tiger's default firewall settings with web sharing turned on. That will give you a start in seeing what you should have on. This article may help a little, too, if you are running services or have certain softwares doing different things (gaming, etc.)
Hope this helps some; sorry I can't help you more.

System.out and System.err

Hi all,
This is a stupid newbie question, but I could not find the answer on the Web
site, so here goes: Where do System.out and System.err get written to? I'm
trying to deploy some plain-vanilla stateless session beans that do a bunch
of println() calls, but I can't see the output anywhere! The WebLogic
Console shows no messages, /myserver/weblogic.log has nothing interesting,
and there are no .log files anywhere that I can see. I even searched /tmp
and found nothing of interest. What am I missing? Do I have to explicitly
open a file for System.out and/or System.err? That doesn't sound right...
- danz

The simple answer to your questions are no and no.
I recently logged a problem with BEA WebLogic technical support regarding
this issue and their response is:
You have two choices. You can either use standard Java file i/o to write
your output to a file, or you can use our t3loggingservices to append
messages into the weblogic.log
The "jump point" for the logging services is at --
http://www.weblogic.com/docs51/classdocs/javadocs/weblogic/common/LogService
sDef.html
It is actually very easy to use -- after you import the proper packages into
your web application it is just as easy to use as System.out.println.
John J. Feigal Voice (651)766-8787 (main)
Sr. Technical Consultant (651)766-7249 (direct)
Ensodex, Inc. Fax (651)766-8792
4105 N. Lexington Ave., Suite 150 email [email protected]
Arden Hills, MN 55126 WebSite http://www.ensodex.com
"Jon Wynett" <[email protected]> wrote in message
news:[email protected]...
I'm running WebLogic as an NT Service. Is there any way to see the
System.out.println messages? Can they be redirected to the weblogic.log
file?
We were running through a DOS Window and saw all the messages, however we
ideally want to run Weblogic as a service.
"Rob Woollen" <[email protected]> wrote in message
news:[email protected]...
I'm guessing that you started the server with the .exe file on Windows.
If you're debugging with printlns, it's generally more conventient to
use the startWebLogic.sh or startWebLogic.cmd files to start the server
from a shell.
By default, you'll see stdout and stderr in the window.
-- Rob
Dan Zivkovic wrote:
Hi all,
This is a stupid newbie question, but I could not find the answer on
the
Web
site, so here goes: Where do System.out and System.err get written to?I'm
trying to deploy some plain-vanilla stateless session beans that do abunch
of println() calls, but I can't see the output anywhere! The WebLogic
Console shows no messages, /myserver/weblogic.log has nothinginteresting,
and there are no .log files anywhere that I can see. I even searched/tmp
and found nothing of interest. What am I missing? Do I have toexplicitly
open a file for System.out and/or System.err? That doesn't soundright...
- danz

TimeMachine leaving out virtual systems

Similar Messages

Maybe you are looking for