Timeout during allocate / CPIC-CALL: ThSAPCMRCV
We have the error: "timeout during allocate / CPIC-CALL: ThSAPCMRCV" when test our RFC "MDX PARSER". Windows 2003 x64 Server, SAP NetWeaver 7.0 Unicode. We read notes about this error (for example 1032461) but we have another problem. Our problem concerned librfc32.dll registration (we doing this using command: regsvr32 C:\Windows\system32\librfc32.dll) because of this we can't starts mdxsvr. Anybody doing same operation on Windows 2003 x64 server?
Hi
I think you should post this in basis and security forum.
Cheers
Chanda
Similar Messages
-
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck. -
STMS distribution error - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Hello All
i am trying to confugreu STMS but i am facing this error when i am tryin to distribute the same,
System EC2 Command TMS_PM_DISTRIBUTE_PROFILE
Client 000 Service tp Profile Service
User TMSADM Start Online
Date 20.10.2009 Function TMS_PS_WRITE_PROFILE_TO_DISK
Time 17:36:23 Message SET_CODEPAGE_FAILED
description : Could not start transport control program tp
detail error is as below if i press on more information
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
some of the posts on forum suggested i should try from same domain i tried but in vain, then i updated the SAP kernel from 7.01 sp 14 to sp 55. but i am still facing the problem.
i created this system recently using system copy based upon export image of a system (ABAP stack ) but using ABAP+Java during export process (by mistake). then we tried to build system using import (ABAP stack only i know its weird but its up and running). I assume we should have builf export imgae using ABAP method but some how due to lack of time we proceeded this way.
The main problem i see is TP RFC . The output from prgram RSTPTEST is as below
everythign is fine except below entries
under RFC destination
EFC ping - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time out during connection setup (check that partner exists
under TP call
RFC link and Offline Call shws me the same error as RFC ping. and there is no output from tp version and DB connect.
Can anybody please help me on the same.
ManiHello All,
thanks a lot for you reply, i want to clear some point here
- I have no other physical attached to the system, i created other system as virtual system.
- to Sunny - i allready went through that thread and upgraded my Kernel also accordign to thread but problem still persist.
- to Anil .. i did as u said but nothing changed after that.
here is the log from trans log file
4 ETW000 r3trans.exe version 6.14 (release 701 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 20.10.2009 - 17:37:33
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans.exe -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Oct 20 17:37:37 2009 12584 0.012584
4 ETW000 [dev trc ,00000] db_con_init called 65 0.012649
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 401 0.013050
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 160 0.013210
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
i have dbms/type = mss in profile parameters
I am still getting the same error.
Mani -
Hello everyone,
while trying to execute an MDX Statement on NW 7s SAP BI i ran into the "timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'" error.
I searched these forums for a solution an found SAP Note 1032461.
The Problem is: it only applys to older versions of the NetWeaver. NW 7 seems to have a new RFC library.
Is there another solution for this problem in NW 7?I found the solution.
The note was right, but i used the wrong .dll. -
STMS error - Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Dear Experts,
We are facing issue in releasing or importing TRs.
1.When releasing TRs in DEV server, it is showing error message "Could not start control program TP" on status bar. But repeating the same process went successful.
2. While Importing TRs into QAS, at the time of refreshing queue/adjusting import queue, it pops-up error " timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' .But after repeating same process, TRs were impoted successfully.
We had performed the following in DEV & QAs:
1. Upgraded kernel to patch level 137.
2. After that replaced TP & R3trans with latest patch levels 169.
3. Re-configured STMS
4. Restarted Server.
Also checked,
(i). Report RSTPTEST in se38- sometimes successful; sometimes error :"timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (ii). RFC "CALLTP_WindowsNT" in sm59 Connection is OK.
Please help.
Thank you in advance.
RegardsHi,
Check below link if it helps:
Re: STMS
Pls also check below things :
- check that the "Gateway Options" are maintained in SM59 and the sapdp00/sapgw00 are maintained in the etc/services files. SAP Note 52959
- Please check SAP Note 773830 if you are on a cluster environment.
For the error regarding timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' please check SAP Notes 581509, 566566.
Thanks,
Rupali -
RFC error: timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#
Hi folks,
We experienced this error while trying to carry out transport into the Production Server- RFC error:timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#.
I have checked connection tests,RFC, they look fine.
Anyone experienced this before?
Thanks.hi,
please check :
SM59 > R/3 Connection > TMS Communication Interface generated --> is the connection OK ?
also check in :
STMS --> is the transport configured properly ?
rgds,
alfonsus guritno -
ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
nareshhi,
i have query data in BI report and that is released for external access. I want to show that data in frame of managment cockpit based on key figure and characterstic. Simple query(region wise sales) with one char, two keyfigures & one time char and created mesure also. I want to show data in column chart.
when i checked in frame, error log: system says:
Error: ODBO error
Details: Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
ours is bi7 system. issue not resolved ..pls suggest me steps to resolve this.
thanks,. -
Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (managment cockpit)
Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
nareshNaresh,
Couple of suggestions...If this thread is still relevant....or please close this thread...
1) Make sure you are not having any issues with running the query, try running it directly in BEX/RSRT.
2)Once we know that there is no issue with teh query...try running the Trace on the user (ST05) to get further details on the error by trying to run it from management cockpit..
3) Check Note 1285242 - CPIC-CALL: 'ThSAPCMRCV' no data received.
Hope this helps..
Vishal. -
Hi,
We have BO XI 4 running on BI 7.0 running on same 64 bit windows server. We intergrated with BI and tried creating the Web Intelligence reports on top of a universe sitting on cube. The Web Intelligence produces results/report when we used one dimension.
When we use more than one dimension, we get the following error.
Database error: The MDX query SELECT { } ON COLUMNS , CROSSJOIN( [0D0CUMENT].[LEVEL01].MEMBERS, [0MATERIAL].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM [$Z02_C01] failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (IES 10901) (WIS 10901)
Can someone please help with this?
Thanks,
BristonHi,
I tried placing the librfc32.dll in the usr\sap\BI7\SYS\exe\uc\NTAMD64 folder. Could it be that I might have used the wrong version of dll?
Thanks,
Briston -
Dear Expert,
Please your advice about the problem PI connection RFC, ECC to PI
first I trying add the parameter RZ10 PI:
gw/sec_info = 0
gw/reg_no_conn_info =1 ( for gw SLD_UC, worked) if im not give parameter RFC SLD_UC error.
gw/acl_mode =1
This RFC name SAPSLDAPI,
type RFC H.
I check SLD not have problem.
Please your advice master..
Regards
~RuhulHi Ruhul,
Please follow the below link and see if it helps:
http://help.sap.com/saphelp_nw70/helpdata/en/78/20244134a56532e10000000a1550b0/content
Regards,
Sriram -
Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 th Rc=456
hi,
i have just install SAP solution manager(windows2003 64bit+maxdb) and kernel is221. when i execute the t-code DB13 is got this error...
pls help to solve it.Hi Madan,
I Hope upgrading your kernel will do it.
I did not get exactly for your kernel level , but similar error was there in older kernel level.
Note 1027826 - SAPDBMRFC terminates
Regards, -
Dear all
When i using SE51 to open any screen , the screen painter can't give me the graphical layout editor and shows the following message:
EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. 37033
Anyone knows what is the problem?
Detail information :
SAP GUI Version : 710 for window
Fatch Level : 11
thanks for your input.Dear All... I had same problem for many mounths... My solution has been the "NAME" of my computer. My name contains a special char ( ì ) and the server didn't answer at my "request" to launch the screen painter SAP.
So try to change your "PC-Name" without special char (ex: "office") and try again to launch the Screen Painter.
I'm sorry for my bad english and i hope this reply will be usefull for You.
Paolo
ITALIAN VERSION:
Ciao a tutti, io ho avuto questo problema e non sono riuscito a trovare risposta; nelle innumerevoli ricerche in rete, con colleghi e persone più esperte di me sono riuscito a capire che lo Screen Painter di SAP in realtà è una sorta di "richiesta" che viene fatta al server. Se il Nome del PC contiene caratteri speciali, il server sembra non rispondere e quindi si va in timeout.
In pratica ho risolto formattando il PC ed in fase di re-installazione de S.O. ho dato come nome solo il mio nome di battesimo ed ho risolto. Ho dovuto effettuare un Format perchè nonostante avessi cambiato il nome del PC da schermata di Windows, la modifica non sembrava essere effettuata correttamente.
Ho testato questo problema su diversi computer e il problema si è sempre risolto in questa maniera.
Spero che questo contributo sia utile a tutti Voi.
Rimango a disposizione per qualsiasi chiarimento.
Paolo -
Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'
Hello experts.
When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
This is what we've tried so far:
replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64) with the new version mentioned in Note 413708.
tested the connection in SM59 - non successful
tested the report query with transaction MDXTEST - non successful
tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
We have the following config:
MS server 2003 SP2 x64 ed.
SAP logon 7.20
MS SQL server 2005
CR 2008
new librfc32.dll version 7200.1.39.6461
Any ideas on what to try next would be highly appreciated!
Cheers, IngAHi Ingo.
We have only one application server.
I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
--IngA
Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM -
Using RS with SAP Netweaver - Timeout during allocate /CPIC 'ThSAPCMRCV'
Hi All,
I am trying to connect to a remote SAP BI server from my local SQL server 2005 Reporting Services. I was able to view all info objects in the query builder but when I try to drill down and view members / drag and drop to create a query / preview the RS report, I get the following error ,
u201CError occurred retrieving child nodes - error occurred when starting the parser - timeout during allocate: /CPIC-CALL 'ThSAPCMRCV' u201D.
I have SAP front end and business explorer installed on my system. We also have the latest patches on SAP BI server.
I tried changing the timeout value but dint help.
Any help is appreciated.
Many Thanks,
ChitraHi
I think you should post this in basis and security forum.
Cheers
Chanda -
RSTPTEST , RFC ping failed RFC error text: timeout during allocate / CPIC-C
Hi all,
I was transporting the request in my landscape last week and all of sudden transports in acceptance system is not working and I am getting a error message as
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< [gwr3cpic.c 6135]
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 [gwr3cpic.c 6148]
, This is the 3 system landscape, common transport directory in development system.
Actions taken:
Restarted the systems (PRD queue is working but not acceptance queue)
DIR_TRANS and Permission were given already and able to ping from all the sytem
Host and service entry were maintained already.
RFC connections were woring fine without errors
I have seen many threads but none of the thread is solved my problem.
Please suggest
VijayHello,
Thanks fpr your reply and I tried the steps which you said and the result is same error for both the options.
1 & 2 Answers :
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< http://gwr3cpic.c 6135
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 http://gwr3cpic.c 6148
I think this is not able to contact the domain controller.
But I can see the checks are fine from checking the transport directory.
Vijay
Maybe you are looking for
-
hello every body , i have a vacation list in sharepoint 2013 i need to calculate the difference between start date and end date excluding the holidays but no such a way to do it in infopath list so i found an article to use an excel service instead
-
XML String as input parm for WS?
Hi All. This has probably been asked and answered a few times, but I can't seem to find a exact answer to my scenario: I have a java method that accepts a string as a input parm. However, the string will contain a fully formatted XML string eg: <?xml
-
What is the application use controls in eCATTS?
Hi, whats the use of TCD & SAPGUI .What type of scripts used for TCD? and also what type of scripts used for SAPGUI. Thanks, Raji
-
How to walk through tabs?
Hello, I can walk through Applications by Command Tab and through windows by Command > How can I go to other tabs? Thank you, Karl
-
Mail crashes and cannot delete outgoing message with large attachment
Tried to send an email with too large an attachment. Now it is stuck in Outgoing Mail. I cannot delete it. It just causes the spinning ball and then eventually mail crashes. I need a way to delete the outgoing message. Any ideas would be appreciated.