Timeout during XLIFF export
Hi!
I'm trying now to translate my application to an other language and I've met the following problem. During "Export XLIFF file for Application" it works, works, works and after some time I see only empty page without any invitation to download...
But when I make this export for one page everything works perfect. Is my application too big to have on XLIFF for whole application and I should make that in per-page process?
Thanks in advance...
Gari,
1) When you get the blank page, is an error occurring? Are there any errors written to the Oracle HTTP Server error log? (this is typically in $ORACLE_HOME/Apache/Apache/logs).
2) You may wish to compute statistics on the FLOWS_XXXXXX schema. For example, in HTML DB 2.0, you could use SQL*Plus, login as SYS, and issue:
exec dbms_utility.compute_statistics( 'FLOWS_020000','COMPUTE');Joel
Similar Messages
-
Currently our production system SAP R/3 4.6B is having one CI and two application server. When enduser tries to upload a document from desktop to SAP, getting CALL_FUNCTION_RECEIVE_ERROR.
The CI works fine but when tried the same ftp to upload from app servers it is
giving error.
The details of CALL_FUNCTION_RECEIVE_ERROR is as follows:
Error text........... "timeout during allocate"
Description.......... "no connect of TP sapftp from host %%SAPGUI%%
after 22
sec"
System call.......... " "
Module............... "gwr3cpic.c"
Line................. 5763
The error occurs in FM FTP_CLIENT_TO_R3
000160 perform check_destination using rfc_destination.
000170
000180 set extended check off.
000190 call function 'FTP_CLIENT_TO_R3' destination rfc_destination
000200 exporting fname = fname
000210 importing error = cerror length = blob_length
> tables blob = blob.
000230 set extended check on.
I have followed the instruction of SAP note 313325 and displayed the
dev_ftp file.
trc file: "dev_ftp", trc level: 2, release: "640"
Thu Jan 04 16:26:31 2007
[1876] sccsid:@(#) $Id: //bas/640_REL/src/krn/ftp/ftpmain.c#8 $ SAP
@(#) $Id: //bas/640_REL/src/krn/ftp/ftp.c#5 $ SAP
@(#) $Id: //bas/640_REL/src/krn/ftp/ftpcmd.c#4 $ SAP
[1876] FTP Start : argc - 6 a0 - sapftp
/H/sxxxxap2 sapgw01 67900565 CPIC_TRACE=2 IDX=35
[1876] RFC DLL loaded
[1876] Environment SAP_CODEPAGE = 1100
[1876] RFC Version 640
[1876] Install server functions
[1876] Call RfcAccept
[1876] RfcError - key: RFC_ERROR_COMMUNICATION
message: CPIC-CALL: 'CMACCP'
LOCATION CPIC (TCP/IP) on local host
ERROR hostname 'sxxxxap2' unknown
TIME Thu Jan 04 16:26:31 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -2
MODULE ninti.c
LINE 336
DETAIL NiPGetHostByName2: hostname 'sxxxxap2' not found
SYSTEM CALL gethostbyname_r
COUNTER 1
[1876] FTP Stop
The error message in their to some extent matches with
SAP note solution 211365. The root cause described that "hostname is protected by router or firewall" does not coincide since Central DB server is working and not the application server scenario.
My questions is , will the instance profile parameter change will fix it?
abap/hostname_for_sapgui= hostname of APP server
How sapftp works in CI alone and not in application server?
The SM59, setting for SAPFTP is as follws:
Connection Type T
Start On : FrontEnd work station
Security options inactive.
Has anyone has experienced this before?Please check out the following SAP Note; a collection of all notes for this type of connection error:
[Note 581509 - Reasons for "timeout during allocate"|https://service.sap.com/sap/support/notes/581509]
Regards,
Dipanjan -
STMS distribution error - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Hello All
i am trying to confugreu STMS but i am facing this error when i am tryin to distribute the same,
System EC2 Command TMS_PM_DISTRIBUTE_PROFILE
Client 000 Service tp Profile Service
User TMSADM Start Online
Date 20.10.2009 Function TMS_PS_WRITE_PROFILE_TO_DISK
Time 17:36:23 Message SET_CODEPAGE_FAILED
description : Could not start transport control program tp
detail error is as below if i press on more information
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
some of the posts on forum suggested i should try from same domain i tried but in vain, then i updated the SAP kernel from 7.01 sp 14 to sp 55. but i am still facing the problem.
i created this system recently using system copy based upon export image of a system (ABAP stack ) but using ABAP+Java during export process (by mistake). then we tried to build system using import (ABAP stack only i know its weird but its up and running). I assume we should have builf export imgae using ABAP method but some how due to lack of time we proceeded this way.
The main problem i see is TP RFC . The output from prgram RSTPTEST is as below
everythign is fine except below entries
under RFC destination
EFC ping - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time out during connection setup (check that partner exists
under TP call
RFC link and Offline Call shws me the same error as RFC ping. and there is no output from tp version and DB connect.
Can anybody please help me on the same.
ManiHello All,
thanks a lot for you reply, i want to clear some point here
- I have no other physical attached to the system, i created other system as virtual system.
- to Sunny - i allready went through that thread and upgraded my Kernel also accordign to thread but problem still persist.
- to Anil .. i did as u said but nothing changed after that.
here is the log from trans log file
4 ETW000 r3trans.exe version 6.14 (release 701 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 20.10.2009 - 17:37:33
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans.exe -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Oct 20 17:37:37 2009 12584 0.012584
4 ETW000 [dev trc ,00000] db_con_init called 65 0.012649
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 401 0.013050
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 160 0.013210
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
i have dbms/type = mss in profile parameters
I am still getting the same error.
Mani -
Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'
Hello experts.
When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
This is what we've tried so far:
replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64) with the new version mentioned in Note 413708.
tested the connection in SM59 - non successful
tested the report query with transaction MDXTEST - non successful
tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
We have the following config:
MS server 2003 SP2 x64 ed.
SAP logon 7.20
MS SQL server 2005
CR 2008
new librfc32.dll version 7200.1.39.6461
Any ideas on what to try next would be highly appreciated!
Cheers, IngAHi Ingo.
We have only one application server.
I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
--IngA
Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM -
ORA-39126 during an export of a partition via dbms_datapump
Hi ,
i did export using datapump in command line everything went fine but while exporting via dbms_datapump i got this:
ORA-39126 during an export of a partition via dbms_datapump
ORA-00920
'SELECT FROM DUAL WHERE :1' P20060401
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 6228
the procedure is:
PROCEDURE pr_depura_bitacora
IS
l_job_handle NUMBER;
l_job_state VARCHAR2(30);
l_partition VARCHAR2(30);
v_sql VARCHAR2(2000);
BEGIN
-- Create a user-named Data Pump job to do a "table:partition-level" export
-- Local
select 'P'|| to_char((select min(STP_LOG_DATE) from SAI_AUDITBITACORA),'YYYYMM')||'01'
into l_partition
from user_tab_partitions
where table_name = 'SAI_AUDITBITACORA'
and rownum = 1;
l_partition := rtrim (l_partition,' ');
l_job_handle:= DBMS_DATAPUMP.OPEN
operation=>'EXPORT',
job_mode =>'TABLE',
job_name =>'EXPORT_ORACLENSSA'
-- Schema filter
DBMS_DATAPUMP.METADATA_FILTER
handle => l_job_handle,
name => 'SCHEMA_EXPR',
value => 'IN (''ORACLENSSA'')'
DBMS_OUTPUT.PUT_LINE('Added filter for schema list');
-- Table filter
DBMS_DATAPUMP.METADATA_FILTER
handle => l_job_handle,
name => 'NAME_EXPR',
value => '=''SAI_AUDITBITACORA'''
DBMS_OUTPUT.PUT_LINE('Added filter for table expression');
-- Partition filter
DBMS_DATAPUMP.DATA_FILTER
handle => l_job_handle,
name => 'PARTITION_EXPR',
value => l_partition,
table_name => 'SAI_AUDITBITACORA'
DBMS_OUTPUT.PUT_LINE('Partition filter for schema list');
DBMS_DATAPUMP.ADD_FILE
handle => l_job_handle,
filename => 'EXP'||l_partition||'.DMP',
directory => 'EXP_DATA_PUMP',
filetype => 1
DBMS_DATAPUMP.ADD_FILE
handle => l_job_handle,
filename => 'EXP'||l_partition||'.LOG',
directory => 'EXP_DATA_PUMP',
filetype => 3
DBMS_DATAPUMP.START_JOB
handle => l_job_handle,
skip_current => 0
DBMS_DATAPUMP.WAIT_FOR_JOB
handle => l_job_handle,
job_state => l_job_state
DBMS_OUTPUT.PUT_LINE('Job completed - job state = '||l_job_state);
DBMS_DATAPUMP.DETACH(handle=>l_job_handle);
END;
I've already drop and recreate the directory, granted read, write to public and to user, grant create session, create table, create procedure, exp_full_database to user, restart the database and the listener with the var LD_LIBRARY pointing first to $ORACLE_HOME/lib, and add more space to temporary tablespace.The basic problem is:
Error: ORA 920
Text: invalid relational operator
Cause: A search condition was entered with an invalid or missing relational
operator.
Action: Include a valid relational operator such as =, !=, ^=, <>, >, <, >=, <=
, ALL, ANY, [NOT] BETWEEN, EXISTS, [NOT] IN, IS [NOT] NULL, or [NOT]
LIKE in the condition.
Obviously this refers to the invalid statement 'SELECT FROM DUAL ...'. I also recommend, you should contact Oracle Support, because it happens inside an Oracle provided package.
Werner -
Unable to retrieve nametab info for logic table BSEG during Database Export
Hi,
Our aim is to Migrate to New hardware and do the Database Export of the existing System(Unicode) and Import the same in the new Hardware
I am doing Database Export on SAP 4.7 SR1,HP-UX ,Oracle 9i(Unicode System) and during Database Export "Post Load Processing phase" got the error as mentioned in SAPCLUST.log
more SAPCLUST.log
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -ctf E /nas/biaexp2/DATA/SAPCLUST.STR /nas/biaexp2/DB/DDLORA.T
PL /SAPinst_DIR/SAPCLUST.TSK ORA -l /SAPinst_DIR/SAPCLUST.log
/sapmnt/BIA/exe/R3load: job completed
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216182102
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "BIA20071101021156
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno = "0020293063"
(EXP) TABLE: "AABLG"
(EXP) TABLE: "CDCLS"
(EXP) TABLE: "CLU4"
(EXP) TABLE: "CLUTAB"
(EXP) TABLE: "CVEP1"
(EXP) TABLE: "CVEP2"
(EXP) TABLE: "CVER1"
(EXP) TABLE: "CVER2"
(EXP) TABLE: "CVER3"
(EXP) TABLE: "CVER4"
(EXP) TABLE: "CVER5"
(EXP) TABLE: "DOKCL"
(EXP) TABLE: "DSYO1"
(EXP) TABLE: "DSYO2"
(EXP) TABLE: "DSYO3"
(EXP) TABLE: "EDI30C"
(EXP) TABLE: "EDI40"
(EXP) TABLE: "EDIDOC"
(EXP) TABLE: "EPIDXB"
(EXP) TABLE: "EPIDXC"
(EXP) TABLE: "GLS2CLUS"
(EXP) TABLE: "IMPREDOC"
(EXP) TABLE: "KOCLU"
(EXP) TABLE: "PCDCLS"
(EXP) TABLE: "REGUC"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216182145
/sapmnt/BIA/exe/R3load: START OF LOG: 20090217115935
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "BIA20071101021156
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno = "0020293063"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
SAPCLUST.l/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090217115937
og (97%)
The main eror is "unable to retrieve nametab info for logic table BSEG "
Your reply to this issue is highly appreciated
Thanks
SunilHello,
acording to this output:
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
you are doing the export with a non-unicode SAP codepage. The codepage has to be 4102/4103 (see note #552464 for details). There is a screen in the sapinst dialogues that allows the change of the codepage. 1100 is the default in some sapinst versions.
Best Regards,
Michael -
Problems found during the EXPORT to specified keyin table.
Hi
I am getting this error in sending iDOC system( We have iDOC-XI-iDOC Scenario.) I tried to reregister the queues but still nothing is passing thru XI.
Thanks,
ManishAcutally I am getting this DUMP in ST22.
<i><b>ShrtText |
Problems found during the EXPORT to specified key in table.
What happened?
Error in ABAP application program.
The current ABAP program "CL_XMS_PERSIST================CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
The table " " does not contain any data records with the specified key.
The system called the internal SAP database interface because it
expected to find such a key.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"EXPORT_TABLE_UPDATE_CONFLICT" C
"CL_XMS_PERSIST================CP" or "CL_XMS_PERSIST================CM00W"
"INSERT_MSG_ALL"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Information on where terminated
The termination occurred in the ABAP program "CL_XMS_PERSIST================CP"
in "INSERT_MSG_ALL".
The main program was "SAPMSSY1 ".
The termination occurred in line 302 of the source code of the (Include)
program "CL_XMS_PERSIST================CM00W"
of the source code of program "CL_XMS_PERSIST================CM00W" (when
calling the editor 3020).
Source Code Extract
Line
SourceCde
272
IF lv_switch_mode = 2.
273
IF export_to_db_optimized = co_true.
274
CALL FUNCTION 'SXMB_EXPORT_TO_DB'
275
EXPORTING
276
iv_kind = 'P'
277
it_prop = lt_prop
278
iv_switch_mode = lv_switch_mode
279
iv_msgguid = clustkey-msgguid
280
iv_pid = clustkey-pid
281
iv_vers = clustkey-vers.
282
ELSE.
283
EXPORT lt_prop FROM lt_prop
284
TO DATABASE sxmsclup2(is) FROM wa_clup ID clustkey.
285
ENDIF.
286
ELSE.
287
IF export_to_db_optimized = co_true.
288
CALL FUNCTION 'SXMB_EXPORT_TO_DB'
289
EXPORTING
290
iv_kind = 'P'
291
it_prop = lt_prop
292
iv_switch_mode = lv_switch_mode
293
iv_msgguid = clustkey-msgguid
294
iv_pid = clustkey-pid
295
iv_vers = clustkey-vers.
296
ELSE.
297
EXPORT lt_prop FROM lt_prop
298
TO DATABASE sxmsclup(is) FROM wa_clup ID clustkey.
299
ENDIF.
300
ENDIF.
301
>>>>>
IF sy-subrc <> 0. "#EC *
303
m_syserr_raise 'PERSIST' 'MSGGUID_EXISTING'
304
clustkey-msgguid clustkey-pid
305
clustkey-vers ''.
306
lv_p1 = clustkey-msgguid.
307
lv_p2 = clustkey-pid.
308
lv_p3 = clustkey-vers.
309
310
RAISE EXCEPTION TYPE cx_xms_syserr_persist
311
EXPORTING id = cx_xms_syserr_persist=>co_id_msgvers_existing
312
p1 = lv_p1
313
p2 = lv_p2
314
p3 = lv_p3.
315
316
ENDIF.
317
318
319
320
table SXMSPRES (resources)
321
table SXMSPXRES (X-resources)
Internal notes
The termination occurred in the function "expOutDb" of the SAP
Basis System, specifically in line 3748 of the module
"//bas/640_REL/src/krn/runt/abexpo.c#8".
The internal operation just processed is "cmpr".
The internal session was started at 20060724051049.
Internal call code.........: " "
Key..................: " "
It is very likely that a constellation similar to the following applies:
Process 1: Process 2:
UPDATE x. ==> NOT_FOUND
UPDATE x. ==> NOT_FOUND
INSERT x. ==> ok
INSERT x. ==> DUPLICATE KEY
DELETE x. ==> ok
UPDATE x. ==> NOT FOUND
+ DUMP
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
[0] DoStack2 ( 0x105a4f7c0, 0x0, 0x2d1b000, 0x100000000, 0x1, 0x0 ), at 0x100471a60
[1] CTrcStack2 ( 0x105a4f7c0, 0x0, 0x100000000, 0x2d1ac00, 0x2, 0x102d1ada4 ), at 0x100471610
[2] __1cQrabax_CStackSave6F_v_ ( 0x10303b400, 0x303b400, 0x103874d10, 0x101fcfce8, 0x100000000, 0x
[3] ab_rabax ( 0x1, 0x2d1ac00, 0x0, 0x100000000, 0x3873800, 0x100000000 ), at 0x100a7fa04
[4] __1cIexpOutDb6FppCpLLInJEXPO_MODE__i_ ( 0x2, 0xe82, 0xffffffffffffffff, 0x101f97a90, 0x2, 0x38
[5] __1cTwrite_data_compress6FkpnICONNE_WR_C_i_ ( 0xffffffff7fffb038, 0x1070, 0x1000, 0x10095fa9c,
[6] __1cMab_connwrite6FIIpHIpFp0pIppnHAB_DATA_ppv_ipFppCpLLInJEXPO_MODE__i_i_ ( 0x0, 0x4, 0x10302a
[7] __1cLexpo_export6F_v_ ( 0x0, 0x960000, 0x95f800, 0x0, 0x103847980, 0x1 ), at 0x10095aa20
[8] __1cIab_jexpo6F_v_ ( 0x0, 0x5b52800, 0xd0, 0x100000000, 0x1, 0x0 ), at 0x100952df4
[9] __1cIab_extri6F_i_ ( 0x100000000, 0x5a37800, 0x2f0, 0x1, 0x0, 0x5e ), at 0x10068ccf8
</b></i> -
RFC ERROR timeout during allocate
Hi all,
We are trying to connect our ECC 6.0 system to ECC 5.0 system thru RFC we get the following error. Both the systems are available running
Timeout during connection setup. Please check partner availability
[abrfcio.c 8139]
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 2799
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
DEST =RQ3CLNT300
HOST =168.189.35.139
SERV =sapdp11
GWHOST =dcecqv1
GWSERV =sapgw02
[abrfcio.c 8139]
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M Wed May 14 05:41:59 2008
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host dcecqv1 / sapgw02
M * ERROR timeout during allocate
M *
M * TIME Wed May 14 05:41:59 2008
M * RELEASE 700
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 242
M * MODULE gwr3cpic.c
M * LINE 1872
M * DETAIL no connect of TP sapdp11 from host cpchrpq1.clorox.com after
M * 20 sec
M * COUNTER 1679
M *
M *****************************************************************************
M
A RFC 2318 CONVID 77332474
A * CMRC=27 DATA=0 STATUS=0 SAPRC=242 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: DDIC (Client: 300)
A RFC> Destination: RQ3 (handle: 2, , {482AC1FF-A0EE-2871-E100-0000A8BD2A0B})
we have mentioned the system no, hostname..every thing correctly
Any help
Thanks
SenthilHi Senthil,
I had faced a similar issue working with my previous company. Upgrading the kernel had done the trick. I am not sure of the SAP note but please check Note, 827872 - Work process waits for registered RFC server
Regards,
Atul Lotlikar. -
Timeout during allocate of Vertex RFC
Hi Guys.
Im facing this odd issue after an offline backup is completed and brings the system.
As you can see the Vertex RFC is no longer working and displays a timeout issue after a Sales programs tries to reach it.
Also when testing the RFC is unable to initialize.
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host etgrws01.entegris.com / sapgw20
M * ERROR timeout during allocate
M *
M * TIME Tue Dec 28 16:43:08 2010
M * RELEASE 640
M * COMPONENT SAP-Gateway
M * VERSION 2
M * RC 242
M * MODULE gwr3cpic.c
M * LINE 1854
M * DETAIL no connect of TP /boltons/D01/vertex/3.3/TransLink/verrfc from
M * host etgrws01.entegris.com after 22 sec
M * COUNTER 6378
M
A RFC 1448 CONVID 40614370
A * CMRC=27 DATA=0 STATUS=0 SAPRC=242 ThSAPECMINIT
A RFC> ABAP Programm: CL_XTAX_RULES_RFC=============CP (Transaction: VA02)
A RFC> User: VMESENBR (Client: 200)
A RFC> Destination: VERTEX (handle: 3, , )
A *** ERROR => RFC ======> CPIC-CALL: 'ThSAPECMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
[abrfcio.c 7933]
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1464
CPIC-CALL: 'ThSAPECMINIT' : cmRc=27 thRc=242
Timeout during connection setup. Please check partner availability
DEST =VERTEX
HOST =etgrws01
PROG =/boltons/D01/vertex/3.3/TransLink/verrfc
[abrfcio.c 7933]
That /boltons/D01/vertex/3.3/TransLink/verrfc is located on the same server as the SAP application, so i cannnot figure out why is showing partner not available/timeouts, when is pinging a program on the same server.
I have tried restarting the Dispatcher
rfc/use_gwstart =1
Increased CPIC timeout value gw/cpic_timeout =120 (Increased CPIC timeout)
I have also searched thru these notes but still no luck
Note 581509 - Reasons for timeout during allocate
Note 638701 - Starting RFC servers takes too long
Note 948636 - Starting executables locally using RFC
The only workaround for this, is restarting the SAP Application, in order to have the RFC working again, but this seems an overkill to fix an RFC Ping Issue.
All ECC Systems have the same program version and configuration but only Dev system is facing this.
The whole point of this, is why when the system is shut down in order to perform an offline backup causes this, and the only way to fix this, is shutting down/start up the system again.
If you have some ideas of what could be causing this, it's would be highly appreciated.
MartinHi Martin,
We are experiencing the same issue with SAP/Vertex. Can you let me know how you resolve this? Did you change the SAP gateway timeout parameter? If so, which one is it?
Your help on this is greatly appreciated.
Thanks much!
Best regards,
Cyanna -
Timeout during allocate / CPI-C error CM_RESOURCE_FAILURE_RETRY
Bonjour,
i receve an error message "timeout during allocate / CPI-C error CM_RESOURCE_FAILURE_RETRY"
when testing an REC destination (SM59), when i see on SM21 i find :
R49 Communication error, CPIC return code 027, SAP return code 456
R64 > CPI-C function: CMINIT(SAP)
can you help me ?
Thank'sHi,
In SM21 you try to find out the corresponding Work processor(WP) No. , as per your bellow error,
"R49 Communication error, CPIC return code 027, SAP return code 456
R64 > CPI-C function: CMINIT(SAP) "
Now you go to that corresponding WP trace like dev_w(xx) in usr/sap/SID/DV.../work directory. Check what exactly happend during that error, try to find some Notes based on that.
Regards,
Hari. -
ERROR: timeout during allocate
Dear All,
When i am establish RFC from Dev to Pro, i am getting Error in SM59 is "ERROR: timeout during allocate"
Here i am copying my dev_rd log please help me to solve this problem
Thu Oct 29 18:33:29 2009
***LOG Q0I=> NiPConnect2: connect (78: Connection timed out) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 11 / sock 21
(SI_ECONN_REFUSE/78; I4; ST; 171.31.111.98:3365) [nixxi.cpp 2823]
LOCATION SAP-Gateway on host pspdscmd / sapgw60
ERROR partner 'pspdciscp:sapgw65' not reached
TIME Thu Oct 29 18:33:29 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 78
ERRNO TEXT Connection timed out
COUNTER 4435Please check out the following SAP Note; a collection of all notes for this type of connection error:
[Note 581509 - Reasons for "timeout during allocate"|https://service.sap.com/sap/support/notes/581509]
Regards,
Dipanjan -
Using RS with SAP Netweaver - Timeout during allocate /CPIC 'ThSAPCMRCV'
Hi All,
I am trying to connect to a remote SAP BI server from my local SQL server 2005 Reporting Services. I was able to view all info objects in the query builder but when I try to drill down and view members / drag and drop to create a query / preview the RS report, I get the following error ,
u201CError occurred retrieving child nodes - error occurred when starting the parser - timeout during allocate: /CPIC-CALL 'ThSAPCMRCV' u201D.
I have SAP front end and business explorer installed on my system. We also have the latest patches on SAP BI server.
I tried changing the timeout value but dint help.
Any help is appreciated.
Many Thanks,
ChitraHi
I think you should post this in basis and security forum.
Cheers
Chanda -
RSTPTEST , RFC ping failed RFC error text: timeout during allocate / CPIC-C
Hi all,
I was transporting the request in my landscape last week and all of sudden transports in acceptance system is not working and I am getting a error message as
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< [gwr3cpic.c 6135]
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 [gwr3cpic.c 6148]
, This is the 3 system landscape, common transport directory in development system.
Actions taken:
Restarted the systems (PRD queue is working but not acceptance queue)
DIR_TRANS and Permission were given already and able to ping from all the sytem
Host and service entry were maintained already.
RFC connections were woring fine without errors
I have seen many threads but none of the thread is solved my problem.
Please suggest
VijayHello,
Thanks fpr your reply and I tried the steps which you said and the result is same error for both the options.
1 & 2 Answers :
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< http://gwr3cpic.c 6135
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 http://gwr3cpic.c 6148
I think this is not able to contact the domain controller.
But I can see the checks are fine from checking the transport directory.
Vijay -
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck. -
Hello everyone,
while trying to execute an MDX Statement on NW 7s SAP BI i ran into the "timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'" error.
I searched these forums for a solution an found SAP Note 1032461.
The Problem is: it only applys to older versions of the NetWeaver. NW 7 seems to have a new RFC library.
Is there another solution for this problem in NW 7?I found the solution.
The note was right, but i used the wrong .dll.
Maybe you are looking for
-
No list view in iPad Air calendar?
In Calendar on the iPad Air, there doesn't seem to be any way to view all your calendar events as a chronological list of events (I.e., "list view"). Can this be true? I've been trying to find it for hours.
-
RMAN Restore - continue from a failed point?
Hi All, While cloning a db using RMAN, We get RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: ================================================
-
Left outer join on linked server
Hi, I am migrating large amounts of data from Oracle database to SQL Server database, through a linked server. When I use LEFT JOIN, the SQL server execution plan shows that the query that merges tables is not executed remotely (i.e. the data from bo
-
SRM Public Sector Tendering Process
Hi Experts Have a question. In SRM 7 Public Sector Procurement (PPS) scenario, I publish the bid against which the bidders provide with their Technical Response. I publish the bid as 'Public Bid'. Question 1: How will the bidders log in to the portal
-
Parse time for OLAP SQL statements
Hello! I have built ROLAP cube and now trying to analyse performance. Most of problems are coming from SQL statements which are prepared by BI beans (Disco or Excel). These statements have a very big parse time because they use IN predicates with a l