Timeout error in Proxy

My file to proxy interface was working fine but suddenly I am getting Time Out error in XI side.
I am gettign a short dump in R/3 side
Termination occured in the ABAP progroam "CL_XMS_HTTP_HANDLER=========CP"
in  "IF_HTTP_EXTENSION~HANDLE_REQUEST"
In the socurce code you have the termination point in line 526 of the (include) program "CL_XMS_HTTP_HANDLER====CM001"
Source Code Extract
lv_status_reason = 'Error during conversion of xi message' . '#EC NOTEXT
This message I got in Short DUMP  in R/3 side . I got this error suddenly in successful file to proxy interface .
Please help me how to resolve this issue.
Regards

in SXMB_ADM -> Integration Engine configuration -> Specific configuration, check if the time out parameter has been modified.
Provide a proper time out value there

Similar Messages

  • Editing vpn connection causes timeout error+ssh proxy error, related?

    Using plasma5, nothing fancy in my setup.
    When i try to edit openvpn connection initially connection window is all blank but the connection name. After a good while controls appear and im greeted with this message:
    Also when i try to connect to ssh that uses proxy i get this:
    ~ % ssh server
    Pass a valid window to KWallet::Wallet::openWallet().
    The kwalletd service has been registered
    Invalid DBus reply:  QDBusError("org.freedesktop.DBus.Error.NoReply", "Message did not receive a reply (timeout by message bus)")
    QDBusConnection: name 'org.kde.kwalletd5' had owner '' but we thought it was ':1.10408'
    FATAL: Cannot get password for user: bit
    ssh_exchange_identification: Connection closed by remote host
    Proxy is configured as:
    ProxyCommand connect -5 -S localhost:9050 $(tor-resolve %h localhost:9050) %p
    Briefly i can see kwallet dialog asking for credentials but then it is replaced by ksshaskpass dialog asking for proxy password. When i start kwallet application window is basically frozen, can resize it only in small bits as if it was waiting on something for second or so and only processing GUI messages for a moment. After a while window can be resized easily but it is still blank, no controls, menus also get stuck until i terminate application forcibly.
    Any idea what am i missing here?

    Hi
    There are many reasons for the error and they are as follows:
    The user is behind a firewall that is blocking ports UDP 4500/500 and/or ESP.
    The VPN client is using connecting on TCP and the default TCP port 10000 for NAT is blocked.
    The internet connection is not stable and some packets are not reaching the ASA or the replies from the ASA aren’t getting to the client, hence the client thinks the server is no longer available.
    The VPN client is behind a NAT device and the ASA doesn’t have NAT-T enabled. In this case the user will not be able to send or receive traffic at all. It will be able to connect but that’s all. After some time the software client deletes the VPN tunnel.
    Suggested solutions:
    If you are using wireless, try to connect with cable
    Turn your firewall off, then test the connection to see whether the problem still occurs. If it doesn’t then you can turn your firewall back on, add exception rules for port 500, port 4500 and the ESP protocol in your firewall
    Turn on NAT-T/TCP in your profile ( remember to unblock port 10000 in your firewall)
    Edit your profile with your editor and change ForceKeepAlive=0 to 1

  • Crystal report server2008 (XI R2): CMC session timeout error

    HI
    Crystal report server2008 (XI R2): CMC session timeout error
                Accessing folders, scheduling reporting or running reports are working fine with Central Management Console (CMC) within the Crystal report server or accessing CMC within VPN machine.  But when CMC is accessed through browser from client desktop i.e through proxy URL, users are not able to access folder or personal folders to view any reports even admin user is not able to access folders. When users try to access folder or personal folders it gives session-timeout errors. Within less than a 1 or 2 minutes it is showing session timeout error. Appreciates any one help on this quickly.
    Regards,
    Patrick Raths

    Please post your query to the [Business Objects Enterprise Administration|BI Platform; forum. This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
    BTW., if thi is an important issue, I'd recommend creating a phone case.
    Ludek
    Edited by: Ludek Uher on Aug 11, 2010 1:58 PM

  • Timeout error in ECC "INTERNAL.CLIENT_RECEIVE_FAILED Error while receiving by HTTP (error code: 402 , error text: ICM_HTTP_TIMEOUT)"

    Dear Experts,
    I am very critical situation due to this timeout error in ECC, please help me as much as you can. Go-live date is very near, but I am not getting any clue why this error is occurring. our ECC system is EHP 4, and PI is dual stack 7.4
    My scenario is synchronous ABAP proxy to HTTP_AAE. request is triggering from ECC via proxy and reaching to third party (bank) through PI, I am reviving the response back in PI from bank. But from PI to ECC the response is not reaching. So in ECC after the defined Timeout limit its getting timed out.
    I have tried everything by increasing the timeout in ECC more than 15 minutes in HTTP_TIMEOUT under SXMB_adm in ECC, but nothing worked, even if I am increasing for half an hour then also its getting timeout after half an hour.
    response from bank to PI is coming within 30 to 40 seconds, but PI is not sending the response back to ECC.
    This is classical scenario, and I have checked the trace via SXMB_Moni in PI as well as in ECC, in ECC its showing the timeout error, but in PI i did not see any trace for this error.
    I have read many thread on SCN for the same error, and everywhere it has been suggested to increase the timeout, and I have tired that, it didn't help me.
    All ABAP proxy configuration has been done as follows.
    RFC destinations in ECC
    LCRSAPRFC(TCP/IP)
    SAPSLDAPI ((TCP/IP))
    G type destination to path "/sap/xi/engine?type=entry"
    G type destination SAP_PROXY_ESR to path "/rep"
    All the destination connection test is working fine.
    but i have a doubt on G type destination(AAE_XDJ) to path  "/sap/xi/engine?type=entry" which is returns the status code 500 with message "Empty HTTP request received", is it ok with 500 ?
    Configuration in ECC Integration Engine configuration is as follows
    Questions
    How the message gets pushed to ECC from PI, once the message received in PI, I believe by G type RFC destination on path  "/sap/xi/engine?type=entry" , please clarify.
    How to trace this, if message is not getting pushed to ECC, I mean I have checked the trace in PI XSMB_MONI, but didn't get anything for this error. In ECC SXMB_moni only I am able to the timeout error.
    Please expert help me as soon as you can, this error really effecting me badly in front of management
    Thanks,
    Farhan

    Hi Hareesh,
    I configured the scenario based on ICO, and again I received the same timeout error in ECC.
    I am really sick with this error, and I have raised the OSS message to SAP. Meanwhile I just want to double check my entire configuration with you. Please see the below configuration (for classical) for ABAP proxy to HTTP_AAE, and let me know if anything is wrong.
    Request structure (ECC->PI->Bank)
    <?xml version='1.0' ?>
    <PaymentInfoMessage>
    <PaymentInfoRequest>
    <CompanyCode>Partner01</CompanyCode>
    <BankCode>BSFRSARI</BankCode>
    <StartDate>2006-07-09T00:00:00</StartDate>
    <EndDate>2006-07-09T00:00:00</EndDate>
    <TransactionType>940</TransactionType>
    </PaymentInfoRequest>
    </PaymentInfoMessage>
    Response Structure (Bank->PI->ECC)
    <?xml version="1.0"?>
    <PaymentInfoMessageResponse>
    <PaymentInfoResponse>
        <TransactionType>940</TransactionType>
        <SequenceNum>1</SequenceNum>
        <ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
        <ProcessStatus>1</ProcessStatus>
        <Comment>No Comment</Comment>
        <TransactionData>:20:MT940-1007200601
    :25:3210000079901
    :28C:190/0001
    </TransactionData>
        <CompanyCode>PARTNER01</CompanyCode>
    </PaymentInfoResponse>
    <StatusCode>OK</StatusCode>
    <StatusDetail>OK</StatusDetail>
    <ResponseItemCount>2</ResponseItemCount>
    </PaymentInfoMessageResponse>
    ESR Configuration
    Please see the below screenshot for ESR config. I have created 4 data types, 4 message types, 2 Service interface (synchronous), 2 mapping and one operation mapping.
    I just want to clarify about selecting the Request and response message type in inbound and outbound service interface.
    <?xml version='1.0' ?>
    <PaymentInfoMessage>
    <PaymentInfoRequest>
    <CompanyCode>Partner01</CompanyCode>
    <BankCode>BSFRSARI</BankCode>
    <StartDate>2006-07-09T00:00:00</StartDate>
    <EndDate>2006-07-09T00:00:00</EndDate>
    <TransactionType>940</TransactionType>
    </PaymentInfoRequest>
    </PaymentInfoMessage>
    Response Structure (Bank->PI->ECC)
    <?xml version="1.0"?>
    <PaymentInfoMessageResponse>
    <PaymentInfoResponse>
        <TransactionType>940</TransactionType>
        <SequenceNum>1</SequenceNum>
        <ReceiptTime>2002-01-02T18:01:00</ReceiptTime>
        <ProcessStatus>1</ProcessStatus>
        <Comment>No Comment</Comment>
        <TransactionData>:20:MT940-1007200601
    :25:3210000079901
    :28C:190/0001
    </TransactionData>
        <CompanyCode>PARTNER01</CompanyCode>
    </PaymentInfoResponse>
    <StatusCode>OK</StatusCode>
    <StatusDetail>OK</StatusDetail>
    <ResponseItemCount>2</ResponseItemCount>
    </PaymentInfoMessageResponse>
    ESR Configuration
    I have simply created 2 data types for requests(ECC->PI->Bank) and did one to one mapping. Similarly for response(Bank->PI->ECC) 2 data types, one to one mapping for this as well.
    But I just want to clarify about selecting the Request and response message type in inbound and outbound service interface. please explain me this for synchronous interface.
    Please see the below structure from ESR and inbound and Outbound service and let me know if the selection of Request and response message types is correct or not.
    OutBound service interface
    Inbound service interface
    Thanks,
    Farhan

  • Webservice Connection Timeout Error in Sun Java System Application server

    I have a java code to connect to Ebay Shopping Webservice that uses the client stub generated through Axis. The code works fine when I run it from the main method of a stand alone Java application. Which means there is no issue with the Proxy settings or any other network setting that could block the webservice from my system. However when I use the same code inside a JSF based Web Application, a connection timeout error comes up. The Web application is deployed on the Sun Java System Application server. The stacktrace of the exception is
    java.net.ConnectException: Connection timed out: no further information
         at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
         at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:527)
         at com.sun.enterprise.server.ss.provider.ASClientSocketImpl.connect(ASClientSocketImpl.java:206)
         at java.net.Socket.connect(Socket.java:520)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:153)
         at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:125)
         at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
         at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
         at org.apache.axis.client.Call.invoke(Call.java:2767)
         at org.apache.axis.client.Call.invoke(Call.java:2443)
         at org.apache.axis.client.Call.invoke(Call.java:2366)
         at org.apache.axis.client.Call.invoke(Call.java:1812)
         at com.ebay.api.soap.ShoppingBindingStub.findProducts(ShoppingBindingStub.java:1217)
         at com.shopping.ebay.EbayServiceUtility.performEBaySearch(EbayServiceUtility.java:66)
         at searchProduct.SearchProductBean.search(SearchProductBean.java:98)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at com.sun.el.parser.AstValue.invoke(AstValue.java:151)
         at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
         at javax.faces.component.MethodBindingMethodExpressionAdapter.invoke(MethodBindingMethodExpressionAdapter.java:77)
         at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:96)
         at javax.faces.component.UICommand.broadcast(UICommand.java:383)
         at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:450)
         at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:759)
         at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:97)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
         at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:113)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:244)
         at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
         at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
         at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
         at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
         at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
         at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
         at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
    The JDK version on my machine is 1.5.0_14. Can somebody point me as where I should be looking for errors?

    You need to delete all the files under the 'generated' directory to force the server to recompile them after the JDK upgrade. Also check in domain.xml and make sure the JVM parameter is pointing to the JDK that you have installed. It is also worthwhile to check asenv.conf to see which JDK that file is pointing to as well.

  • Crystal report server2008 (XI R2): InfoView Request timeout error

    HI
    Crystal report server2008 (XI R2): InfoView Request timeout error
                Some reports which are taking more than 10 to 15 minutess while running through InfoView gives error as follows:
    An error has occured: Request timed out.
    This error appears within the crystal  report server and when user tries to access through browser client desktop also. Sometimes it  prompts the error as follows when users try to access through browsers from there desk i.e through proxy connection.
       The proxy server received an invalid response from an upstream server.
       The proxy serer could not handle the request POST/report/CrystalReports/Viewrpt.aspx.
        Reason: Error reading from remote server
    The timeout setting of all web.config files under infoviewapp, infoviewappactions, platform services, crystal reports folders have been checked and the default timeout 20 minutes is changed to 30 minutes and IIS is restarted, but still users are getting request timeout error within 10 to 15 minutes while running a crystal report. Even admin user.
    Regards,
    Patrick Raths

    Please post your query to the [Business Objects Enterprise Administration|BI Platform; forum. This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
    BTW., if thi is an important issue, I'd recommend creating a phone case.
    Ludek
    Edited by: Ludek Uher on Aug 11, 2010 1:57 PM

  • InfoView Request timeout error for Crystal report server2008 (XI R2):

    HI
    Crystal report server2008 (XI R2): InfoView Request timeout error
    Some reports which are taking more than 10 to 15 minutess while running through InfoView gives error as follows:
    An error has occured: Request timed out.
    This error appears within the crystal report server and when user tries to access through browser client desktop also. Sometimes it prompts the error as follows when users try to access through browsers from there desk i.e through proxy connection.
    The proxy server received an invalid response from an upstream server.
    The proxy serer could not handle the request POST/report/CrystalReports/Viewrpt.aspx.
    Reason: Error reading from remote server
    The timeout setting of all web.config files under infoviewapp, infoviewappactions, platform services, crystal reports folders have been checked and the default timeout 20 minutes is changed to 30 minutes and IIS is restarted, but still users are getting request timeout error within 10 to 15 minutes while running a crystal report. Even admin user.
    Regards,
    Patrick Raths

    Also try the below changes for IIS,
    Right-click default website --> properties
    Go to the Home Directory tab and click on Configuration
    Change the Session Timeout to 30 minutes
    Click OK
    Right click the BOBJAppPool121 Application Pool --> Properties
    Go to the performance tab and change the idle timeout to 30 --> Click OK
    Right click the DefaultAppPool Application Pool --> Properties
    Go to the performance tab and change the idle timeout to 30 --> Click OK
    Restarted IIS
    Thanks,
    Hari

  • Timeout Error in a Synchronous XI - SOAP scenario

    Hi All,
    I have developed a Synchronous ABAP proxy to SOAP web service scenario.
    ECC sends an ABAP proxy request to PI, PI forwards the request to the target system as SOAP message.
    I have checked the interface via SOAP UI and it works fine but when we run the end-to-end flow it always ends with a Synchronous timeout error.
    The Target system confirms that the response is sent from there side but in PI we are not receiving any response and the system throws a  timeout error.
    As both PI and the Target system are in same Landscape there is no firewall in between.
    Please suggest what can be the possible reasons and the approach to resolve the same?
    Thanks in advance,
    Shashank

    Hi,
    "The target system needed credentials for one  inbound interface, so for this synchronous scenario(PI<->Target) should the target system maintain credentials some where when the response is sent back to PI as the SOAP channel is on Java Stack?"
    Generally for receiver channel we get the user name and password from target system ie web service.
    How did you test in SOAPUI? did you test it with providing username and password or not?
    even if web service requires user/pwd then it will throw 401 unauthorized error.
    check this
    can you go to RWB-->component monitoring-->adapter Engine-->communication channel monitoring-->your channel
    check if the channel has any errors/exceptions logs.
    Regards,
    Muni.

  • XI timeout error

    I sent some synchronous messages from ABAP client system and got the error in XI and ecc client.
    scenario:ECC(ABAP proxy)>webdispatcher>XI(XI adapter)-->(ABAP proxy)ECC.
    The message started at 17:17:00 and stoped at 17:22:05.The message
    processed over 5 min. According to the error message(The error occurred while receiving it by http,error code:110),i think it is a timeout error.But i have set the icm timeout in client
    system,webdispatcher and XI for 10 min as below.
    icm/server_port_0 = PROT=HTTP,PORT=8000,TIMEOUT=600,PROCTIMEOUT=900
    I want to know where returns the 5 min timeout.Could you help me?

    Hi all,
    Thanks for your solutions.
    My XI version is XI7.0 SP10.
    I have set the timeout parameter like:
    icm/server_port_0     = PROT=HTTP,PORT=8000,TIMEOUT=600,PROCTIMEOUT=900
    So ,i think i don' t need to set HTTP_TIMEOUT in sxmb_adm and also don't need to set keep alive timeout to 30sec.
    TIMEOUT = icm/keep_alive_timeout in case of XI 7.0.
    The parameter
    icm/server_port_0     = PROT=HTTP,PORT=8000,TIMEOUT=600,PROCTIMEOUT=900
    means that the processing timeout is 900sec and the keepalive timeout is 600.
    Brand

  • Recieving CORE7740 IO timeout error

    We have an issue were under load we are receiving connection errors attempting to connect to one of our middle tier servers. We are receiving a CORE7740 error - and I cannot find out any info on it. What exactly is this error? How do I increase the timeout for this? Any ideas for alleviating this? Any help would be welcome.
    Our configuration:
    Sun-Java-System-Web-Server/7.0 update 2
    Middle tiers: JBoss - 4.2.2.GA - http connector over tcp
    <Object name="reverse-proxy-/">
    ObjectType fn="http-client-config" timeout="3600"
    ObjectType fn="http-client-config" connect-timeout="3600"
    Route fn="set-origin-server" server="http://lpmid.examen.com:8080" server="http://lpmid1.examen.com:8080"
    </Object>
    From the error logs:
    [24/Jul/2008:07:17:27] fine (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, attempting to connect to 10.10.15.21:8080
    [24/Jul/2008:07:21:11] fine (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, error connecting to 10.10.15.21:8080 (IO time
    out error)
    [24/Jul/2008:07:21:11] fine (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, service-http reports: CORE7740: unable to con
    tact lpmid1.examen.com:8080 (IO timeout error)
    [24/Jul/2008:07:21:11] info (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, set-origin-server reports: HTTP7751: server l
    pmid1.examen.com:8080 offline
    [24/Jul/2008:07:21:11] fine (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, set-origin-server reports: received sticky re
    quest for server lpmid1.examen.com:8080
    [24/Jul/2008:07:17:27] fine (17169): for host 67.99.63.186 trying to POST /matter/billing/LegalBillSubmit.serv, attempting to connect to 10.10.15.21:8080
    G

    >
    If you were to disable failover but keep load balancing on, Web Server would return an error for any request destined for an offline origin server. (I think maybe you misunderstand how failover works; Web Server will only failover a request with a sticky session to another origin server if the sticky origin server is truly down. The fact that an earlier request failed will not prevent Web Server from trying to send a request with a sticky session to the correct origin server.)
    >
    We are definitely seeing subsequent calls to that server getting shunted over to other boxes after that TIME-OUT....
    [07/Aug/2008:05:17:22] fine (18310) cl-production-ssl: for host xx.xx.xx.xx trying to GET /reports/exec_overview_result.jsp, reusing existing persistent connection to lpmid:8080
    [07/Aug/2008:05:22:23] failure (18310) cl-production-ssl: for host xx.xx.xx.xx trying to GET /reports/exec_overview_result.jsp, service-http reports: HTTP7768: error reading response body (IO timeout error)
    [07/Aug/2008:05:22:23] info (18310) cl-production-ssl: for host xx.xx.xx.xx trying to GET /reports/exec_overview_result.jsp, set-origin-server reports: HTTP7751: server lpmid:8080 offline
    [07/Aug/2008:05:22:23] fine (18310) cl-production-ssl: for host xx.xx.xx.xx trying to GET /reports/exec_overview_result.jsp, set-origin-server reports: received sticky request for server lpmid.examen.com:8080
    [07/Aug/2008:05:22:23] warning (18310) cl-production-ssl: for host xx.xx.xx.xx trying to GET /reports/exec_overview_result.jsp, set-origin-server reports: HTTP7753: received sticky request for offline server lpmid:8080 (using server lpmid2:8080 instead)
    [07/Aug/2008:05:22:25] fine (18310) cl-production-ssl: for host yy.yy.yy.yy trying to GET /images/tab_documents_inactive.gif, set-origin-server reports: received sticky request for server lpmid:8080
    [07/Aug/2008:05:22:25] warning (18310) cl-production-ssl: for host yy.yy.yy.yy trying to GET /images/tab_documents_inactive.gif, set-origin-server reports: HTTP7753: received sticky request for offline server lpmid:8080 (using server lpmid2:8080 instead)
    [07/Aug/2008:05:22:40] fine (18310) cl-production-ssl: trying to OPTIONS http://lpmid:8080, check-http-server reports: received HTTP response code 200 from server lpmid:8080
    [07/Aug/2008:05:22:40] info (18310) cl-production-ssl: trying to OPTIONS http://lpmid:8080, check-http-server reports: HTTP7750: server lpmid:8080 onlineNotice that client yy.yy.yy.yy never got the timeout, they just tried to go to "lpmid" which had been marked "offline" by the webserver, so they got shunted to lpid2. They were an innocent victim of the timeout for xx.xx.xx.xx...right? At 5:22:40, the health check thread runs against lpmid and all is right with the world again.
    That is why we think that there are "innocent victims" of this TIME OUT issue.
    I used to have a bunch of <IF></IF><ELSE></ELSE> statements in my obj.conf files for some other things, but had to pull them out as the GUI would consistently scramble the lines up and cause major problems...so I am more than a little leary about using them again. (But that's a whole different subject.) :-)
    -JN

  • TimeOut error while running a report on the report server

    Hi,
    One of my report is taking 30 minutes to generate the output. It works fine when I run it locally, but when I run it on report server I encounter the following error message. Its a timeout error. Any solution other than tuning the query, please.
    500 Internal Server Error
    org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
         at java.lang.Class.newInstance0(Native Method)
         at java.lang.Class.newInstance(Class.java:237)
         at com.inprise.vbroker.orb.SE.read(SE.java:28)
         at com.inprise.vbroker.orb.DelegateImpl.handleReply(DelegateImpl.java:711)
         at com.inprise.vbroker.orb.DelegateImpl.invoke(DelegateImpl.java:606)
         at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:459)
         at oracle.reports.server._ConnectionStub.getMainFile(_ConnectionStub.java:1283)
         at oracle.reports.client.ReportRunner.getMainFile(ReportRunner.java:488)
         at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:121)
         at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:95)
         at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1322)
         at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1139)
         at oracle.reports.rwclient.RWClient.doPost(RWClient.java:328)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:283)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
         at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)

    Hi Bhasker
    Try setting idleTimeOut under connection element in server configuration file to a large value.
    Regards
    Sripathy

  • Getting timeout error while updating a record from c#

    Hi,
    I have around 30k records in a tables. When I update that record inside the Transaction (Enterprise Data Library, c#) , it takes long time and throws timeout error.
    But I am able to update the same record via Toad.
    In the morning I tried same updating the record, it works without any change in the code or script.+
    is it due table lock or db related issue? please adivse, how to resolve if occurs again.
    anand

    Code:
    private static void Save()
    using (DBTransactionManager dbTransactionManager = new DBTransactionManager())
    try
    DataTableDAL.Instance.ExecuteDML("Update Voyage SET BallastBonus = 30000 WHERE ID = 'AE53B610BEA743EC8AFBAED0C8349BF8';");
    //commit database
    dbTransactionManager.Commit();
    catch
    dbTransactionManager.RollBack();
    throw;
    Table
    Column Name     ID     Pk     Null?     Data Type     Default     Histogram     Encryption Alg     Salt
    ID     1     1     N     NVARCHAR2 (32)          None          
    CALCNUMBER     2          N     NUMBER (10)          None          
    CURRENCYID     3          N     NVARCHAR2 (32)          Frequency          
    CALCTYPE     4          N     NUMBER (5)          Frequency          
    ESTIMATEDESCRIPTION     5          Y     NVARCHAR2 (200)          None          
    ESTIMATEGROUPDESCRIPTION     6          Y     NVARCHAR2 (200)          None          
    BALLASTBONUS     7          Y     NUMBER (12,2)          None          
    BALLASTBONUSCOMMPCT     8          Y     NUMBER (6,3)          None          
    ISESTIMATE     9          N     NUMBER (1)          None          
    ADDITIONALSTEAMVALUE     10          Y     NUMBER (8,4)          None          
    ISADDITIONALSTEAMPCT     11          Y     NUMBER (1)          None          
    ADDITIONALPORTVALUE     12          Y     NUMBER (8,4)          None          
    ISADDITIONALPORTPCT     13          Y     NUMBER (1)          None          
    CREATEDBY     14          N     NVARCHAR2 (32)          Frequency          
    CREATEDDATE     15          N     DATE          None          
    UPDATEDBY     16          Y     NVARCHAR2 (32)          None          
    UPDATEDDATE     17          Y     DATE          None          
    LUMPSUMCARGOCOST     18          Y     NUMBER (1)          None          
    BUNKERPRICEMETHOD     19          Y     VARCHAR2 (30 Byte)          None          
    INCCONTCALCRESULT     20          Y     NUMBER (1)          None          
    FINAL_EST     21          Y     NUMBER          None          
    SPOT_VOYAGE     22          Y     NUMBER (1)          None          
    ISRUNCOSTEDIT     23          Y     NUMBER (1)          None          
    Index
    Table doesnt have any index, except primary key index.
    Total Records
    35,000
    Hope this input might sufficient to help me.

  • Open socket timeout error

    Sometime I can write to the local shared variable through data socket. But sometime cannot. Even though, I still can read/write through shared variable monitor.
    The error is in the open socket, said connect to peer timeout. I set timeout to 10s or left blank both not work.
    I am using 8.2.1 on vista. The computer has 2 lan ports.
    I met almost same case long time ago. I solved it by diable NETBIOS and one of the lan port.
    This time, I disabled netbios already. But in vista, seems not able to disable the other lan port.
    Any suggestion?

    hi turbot,
    I had same problem of timeout error.just check if system Firewall is on or off if it is on then make it off and then run the program.i don't know how much this will help you,it helped me.
    GAK
    Gaurav k
    CLD Certified !!!!!
    Do not forget to Mark solution and to give Kudo if problem is solved.

  • Why do i keep getting the "internet connection timeout" error message?

    i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?

    yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.

  • Frame timeout error using Configure Trigger3.vi

    Hi all,
    I'm triggering the frame capture of an .avi with an RTSI connection.  However, I keep getting a frame timeout error when I use the IMAQ Configure Trigger3.vi.  I don't get any timeout errors when I just use the IMAQ Generate Pulse3.vi but I am trying to sync the frame capture to an optical switch.  If I just use IMAQ Generate Pulse3.vi, I get a .avi but the frames are completely out of sync with the switch, but if I use both IMAQ Generate Pulse3.vi  and Configure Trigger3.vi I get nicely separated images but it takes an age and ends up in a timeout error.
    I want to capture e.g. 500 frames, over the course of 2 s - so I've set my frame timeout to be 2000.   At my current acquisition rate (31680 Hz per line (1024 pixels)) 500 frames corresponds to a total of 1.578 s (images are 100 pxls in height).  This is much less than the total scanning time.  Where am I going wrong?
    Thanks in advance for your help.
    Miika
    Attachments:
    screen.png ‏32 KB

    Hey Miika
    What are the hardware you are using. These vi's only work with specific hardware and this may be why they are not functioning correctly. For example the Configure trigger3 vi only works with the following PCIe-1427, PCIe-1429, PCe-1430, PCIe-1433.
    Matthew Trott
    Applications Engineer
    National Instruments UK
    www.ni.com/ask

Maybe you are looking for