Timeout error when submitting feedburner podcast feed to itunes

This is my first time submitting my podcast to itunes, I have created the feed with feedburner and I can manually subscribe and download the podcast in itunes however when i try to submit the feed I recieve the generic timout error, see below. I have tried for several days with different machines to no avail. Any suggestions?
Feed Address: http://feeds.feedburner.com/ThePortcast
Thanks in advance.

The feed appears to be OK; sometimes individual servers can behave oddly with the Store but as yours is a Feedburner feed there shouldn't be any problem, so there is no obvious reason why this is happening.
You could try the allternative submission URL:
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/publishPodcast
If that doesn't work one possibility is that there is a problem at the Store end, which does happen though it doesn't usually go on for several days. You could try emailing support at podcasts 'at' apple.com but I have to say that you likely won't get a helpful answer. Otherwise I can only suggest giving it a day or two and trying again.

Similar Messages

  • ITunes returning 404 error when submitting working podcast feed

    I am trying to submit a podcast to the iTunes Directory but iTunes is returning a "bad http result code:404" error. This is a known good feed verified by both feedvalidator.org and iTunes U. Feedvalidator shows an encoding error ("utf-8" vs. "US-ASCII"), but otherwise has no problem. Feed is here: http://itunesmedia.seu.edu/Chapel/2013_Chapel/rss.xml. Thanks.

    No obvious answer here. The feed looks fine and can be subscribed to manually in Tunes perfectly well.
    The encoding error you mention occurs a lot and doesn't normally seem to cause any problems. Error 404 is 'file not found'.
    We have seen cases where perfectly good feeds couldn't be read by the Store: I've never seen an expanation, and my guess - and I emphasize it is a guess - is that the server is for some reason not responding to requests from the Store when it does to all other requests.
    You could start by leaving it for a bit and trying again in case it's some sort of temporary glitch. If it still doesn't work I can only suggest you ask the people running your server if they can check the server logs for when this happened.

  • TS1424 error when submitting a podcast rss: byte-range requests

    Hi when I submit rss feeds now I'm getting an error message that we need to enable byte-range requests.
    I saw this article:
    http://theaudacitytopodcast.com/itunes-changes-podcast-specs-and-features/
    saying that " iTunes now requires all hosting servers to enable Byte Range Requests"
    my podcast mp3 is hosted in CDN that, as I've checked, supports range requests.
    but my rss feed contains urls that first return a redirect, to the real url (where range requests are supported)
    could this be a problem? are redirects on episode urls supported (they were until now)? should I modify the redirect response somehow to indicate that range requests are supported on the target server (I thought that shouldn't be necessary)?
    take this as a feed example: http://www.blogtalkradio.com/djsqwyd.rss
    Thanks in advance,

    URL:
    https://www.seven-thoughts.com/rss/rss.xml

  • Bad http result code 501 when submitting a validated feed to iTunes

    I have a podcast feed that I've validated at http://validator.w3.org as well as http://www.feedvalidator.org.  Both tests say that my feed is valid.  When I try to submit the feed URL to iTunes, I get the response: "We had difficulty reading this feed. Bad http result code: 501".  Any suggestions as to what I'm missing?

    Although your feed validates, and can be accessed in a browser and subscribed to in iTunes - and also the media files are correctly hosted on a server which can handle byte-range requests (a required facility) - the server hosting your feed is for some reason unable to handle requests specifically from the iTunes Store. This situation has arisen before but no obvious solution has been suggested (one poster with a similar problem found that it was a permissions issue on the server). This is something you will need to take up with the people running your server - their logs may possibly give some indication of what the problem is.

  • Error when Submitting a Podcast

    When I attempt to submit the url for my podcast to itunes I continue to receive the following error:
    We had difficulty reading this feed. Connection reset
    I am able to access the feed from IE 7, Safari, and Firefox. I also successfully ran the feed through an rss validation.
    Anyone every had this error and what suggestions can you offer to fix the problem?

    URL:
    https://www.seven-thoughts.com/rss/rss.xml

  • Getting "Read timed out" error when submitting new podcast

    http://www.therpghaven.com/podcast/?feed=podcast
    My feed is validated. I've checked it against the example feed and it seems fine. I can subscribe directly from within iTunes and it looks fine, downloads the first episode.
    I saw that there was maintenance last night. Is it possible this isn't my fault?
    If it is, any clues would be a great help!
    Thanks

    I'm using WordPress with the Podcasting plug-in, which I have admin access to. That's what generates the feed. But according to the developers, the feed is not actually a file, but something dynamically generated by WordPress when it is called. When you say "actual file" do you mean the podcast itself? Or the feed?
    I'm not familiar with WordPress: possibly what they mean is that a process takes place on the server each time a request is received for the feed: if this is so then you can't change that. By 'actual file' I did mean the feed - most systems produce an .xml file and it is that which is submitted to iTunes.
    As to log-in, normally the iTunes Store effectively keeps you logged in: I assume you would need to have cookies enabled - is this the case?

  • Error when submitting a podcast to iTunes

    We get the following error:
    "Podcast cover art must be at least 600 x 600 pixel JPG or PNG, in RGB color space, and hosted on a server that allows HTTP head requests".
    We validated the feed and tested in iTunes and the podcasts work. 
    Here is the path for our xml feed: http://positivecoach.org/common/cms/documents/Podcast%20XMLs/PCA_1-on-1.xml
    Here is the path for our image: http://www.positivecoach.org/common/cms/images/Logos/PCA_1on1_square_160px_yello w.jpg
    We are stumped on how to fix.  Any suggestions?
    Thanks!

    Your image is only 160 x 160 and so doesn't even meet the standard specified in the error message: however that message needs amending because Apple are now making 1400 x 1400 px mandatory. So your image needs to be that size, and must be a JPG or PNG and less than 500 kB.

  • Error 5002 on submitting a podcast feed to itunes

    I keep getting this error 5002 when I try to submit a Podcast to itunes here in Australia. Anyone know whats happening??? Please???

    I think I found the answer but it is not solved yet. They have a problem. Look here. http://discussions.apple.com/ann.jspa?annID=383

  • Can't submit Feedburner podcast to the iTunes Directory, possibly timeout

    I'm trying to submit my I'm trying to submit my feedburner podcast to the iTunes Directory.
    Here's the error message I'm getting.
    Our connection was interrupted to this feed possibly due to a timeout. The host did not accept the connection within the timeout of 10000 ms.
    Help!!
    Here's the error message I'm getting.
    Our connection was interrupted to this feed possibly due to a timeout. The host did not accept the connection within the timeout of 10000 ms.
    Help!!

    It's working now!

  • Re-submitting my podcast feed after it has been deleted dosen't work?

    Hi
    I had recently submitted a podcast feed for my company. However I made a mistake in asking to have it deleted so I could make some changes.
    Now having completely revised my understanding of how the feed works, I have now re-submitted my feed:
    http://www.shogunaudio.co.uk/podcast.xml
    When the podcast was up before it ran fine, and was very popular. My feed is valid, I can subscribe using the 'advanced - subscribe to podcast' in iTunes. But for some reason it won't register. I have re-submitted the same feed 3 times and I don't get a 'duplicate feed' warning, it just says that it is submitted and I will be getting an email, but nothing happens.
    I desperately want to get this up and running asap, what is wrong here?
    Thanks

    I can't really say what is going on, but I don't think submitting from another account or changing the IP number will have any effect. Normally in this situation you should change the title slightly, and also rename the feed - as I suggested, you could call it podcast1.xml (so that the URL changes) - these are the parameters affecting it. The only other possibility I can think of is that you have managed to introduce some problem into the feed which is causing it not to be accepted (though if you can subscribe from the 'Advanced' menu this seems unlikely).
    Would you like to post the URL of the revised feed?

  • Error when submitting responses

    Some respondents receive an error when submitting survey results.  Could there be a timing issue with the server if many responses are coming in at the same time?  Or could the error be caused at the senders location?

    we are trying to catch it.  It flashes quickly before results are submitted (via iPad) and communication is ended.  It may be a timing issue.  Let me look into this further.  Could be the user too!!!!!!!!!!!!!!!!!!
    Donna Dowdle
    IT Manager
    Dr. Scholl Foundation
    (847) 559-7430 - office
    (847) 602-0709 - cell
    DISCLAIMER!  The information contained in this e-mail message is confidential and is intended only for the use of the individual or entity to whom it is addressed.  If the reader of this message is not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on the contents of this communication is strictly prohibited.  If you have received this e-mail message in error, please contact the sender at (847) 559-7430 and delete this e-mail message.

  • Error"There was an internal error when submitting the form" URM Disposition

    Hello
    I get the following error - "*There was an internal error when submitting the form*" - when i allocate a Retention Disposition to a Retention Category.
    Any Ideas how this can be solved?
    Thank you

    Not based on the minimal information provided.
    Error messages in 11g, from a UI standpoint, are severely deficient. How about looking in the content server logs and posting some more information?

  • I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

    I cannot buy a photobook with IPhoto since I always get an error when submitting... any idea ?

    May depend on which version of iPhoto you have installed.
    Check out this thread >   https://discussions.apple.com/message/15324917#15324917

  • Symbol error when submitting form

    experiencing a symbol error when submitting form.

    Hi Gen,
    Unfortunately, the error came from a client who was submitting a form via Mac OS.  He stated that when he attempted to submit he received a symbol error.
    On another note, I did experience issues with periods (.) within another form such as 2009.01 and 2011.25.  When I downloaded the files corresponding to the numbers, it wouldn’t allow me to save it with the period (used an underscore instead).
    Warmest regards,
    Delia
    Delia Boyd
    Program Manager, Standards Development
    Executive Office
    AOAC INTERNATIONAL
    481 N. Frederick Avenue, Suite 500
    Gaithersburg, MD 20877-2417
    301-924-7077 x126
    301-924-7089 - Fax
    [email protected]<mailto:[email protected]>
    www.aoac.org<http://www.aoac.org/>
    cid:[email protected]
    127th AOAC Annual Meeting & Exposition
    Palmer House Hilton
    Chicago, Illinois
    August 25-28, 2013
    For more information visit our website
    at: http://www.aoac.org/meetings1/127th_annual_mtg/main_2.htm
    þ Please consider the environment before printing this email.
    ...you will see it when you believe it!

  • I get this error when submitting the issue to DPS

    Hi am using Woodwing Enterprise to publish folios to the Adobe DPS and it has been okay, I have finished creating of a new issue and I get this error when submitting the issue to DPS : Adobe Distibution Server returned error while calling "createIssue". HTTP code: 401. HTTP message. " Unknown error.". Adobe results message: " Unauthorized for access. See logs for further details." Adobe results status: " UNAUTHORIZED." The DPS account was recently renewed

    Please contact gold support about this issue.

Maybe you are looking for

  • Tried all the suggestions but still aint working PLEASE HELP!!

    I got my nano in january but it hasnt been turning on for about a month. Its fully charged and sometimes makes a beeping noise when it plugged into the computer. Two icons keep appearing a folder with a ! mark and a black and white battery. Ive tried

  • Parallel development with ClearCase and Jdev

    I am looking for information on "best practices", howtos, etc for configuring a ClearCase VOB repository to support parallel development of J2EE applications/components using JDeveloper in a large development team. In particular, I am not sure how to

  • IPhoto Cannot Be Launched!!!!

    My iPhoto application was working fine until I enabled Photo Stream and tried to move some pics. to Photo Stream. Now when I try to launch iPhoto, I get a screen that the says "iPhoto application unexpectedly quit while trying to restore its windows.

  • H E A P   C O R R U P T E D - and smd agent shows not running

    Hello Gurus, My SMD agent is goes down every day when i check the status: I found the heap corroupted everyday with the below warnings: nbcsaplpa018:nedadm 19> tail hs_err_pid1888352.log   H E A P   C H E C K  - Suspension of other threads succeeded.

  • Twain drivers interface under photoshop CC with Epson Products

    Could i ask if there is solutions to get back the twain drivers we have in the past into photoshop where this one is going away,   why does we have to use no WIA extensions ( not able to do multiple scan) i could understand that it can be solved when