Timeout error while reading and updating in batches in a single transaction
Problem:-
In a transaction I do read and update to the database in batches. First batch it runs fine and for second batch it get hanged at
sqlCommand.ExecuteReader(). The following is not my complete code but required bits of it which will give more information about the problem. At the end of this post please find the error log. Please help me.
My guess:-
The problem i see here is with the locks acquired while reading and update still remain when it comes for the second batch which is blocking the next read. But could not find a way to solve it.
Get connection and open it.
Begin Transaction.
sqlUpdateTransaction = sqlUpdateConnection.BeginTransaction(String.Format("UpdateUsageDetailTransaction{0}", storageClassId))
Get application lock.
GetApplock
const String sqlText = @"DECLARE @result int EXEC @result = sp_getapplock Resource=@resourceName,@LockMode='Exclusive',@LockOwner='Transaction',@LockTimeout=@timeout select @result";
using (SqlCommand sqlCommand = sqlTransaction.Connection.CreateCommand())
sqlCommand.CommandText = sqlText;
sqlCommand.Parameters.AddWithValue("@resourceName", resourceName);
sqlCommand.Parameters.AddWithValue("@timeout", milliSecondsTimeout);
sqlCommand.CommandTimeout = secondsTimeout;
sqlCommand.Transaction = sqlTransaction;
Int32 lockResult = (Int32) sqlCommand.ExecuteScalar();
Seek and read the range of records.
using (var sqlReadConnection = new SqlConnection(_connectionString))
sqlReadConnection.Open();
SqlTransaction sqlTransaction = _sqlUpdateTransaction;
_cdrList = CdrOps.FetchByrecordsIdRange(_yearMonth, firstSkid, firstSkid + count - 1, sqlReadConnection);
sqlReadConnection.Close();
return _cdrList.Count > 0;
static public Dictionary FetchByrecordsIdRange(Int32 yearMonth, Int64 startCdrId, Int64 endCdrId, SqlConnection sqlConnection)
Dictionary cdrList = new Dictionary();
using (SqlCommand sqlCommand = sqlConnection.CreateCommand())
sqlCommand.CommandText = "EXEC P_GetCDRData @yearMonth, @startCdrId, @endCdrID";
sqlCommand.Parameters.AddWithValue("@yearMonth", yearMonth);
sqlCommand.Parameters.AddWithValue("@startCdrId", startCdrId);
sqlCommand.Parameters.AddWithValue("@endCdrID", endCdrId);
sqlCommand.CommandTimeout = DbOps.TwoHourTimeoutValue;
using (SqlDataReader sqlDataReader = sqlCommand.ExecuteReader())
FetchrecordPieces(sqlDataReader, cdrList);
return cdrList;
Update the records to the list by using a loop Go and check if the number of records read is equal to the batch size then write and flush.
update()
_tollUpdatedList.Add((Toll) record);
_legacyUpdateCount++;
Dispose.
Dipose()
if (_sqlUpdateTransaction != null && _sqlUpdateTransaction.Connection != null)
sqlUpdateTransaction.Rollback(String.Format("UpdateUsageDetailTransaction{0}", _storageClassId));
_sqlUpdateTransaction.Dispose();
_sqlUpdateTransaction = null;
Commit.
commit()
if(_sqlUpdateTransaction != null)
_sqlUpdateTransaction.Commit();
_sqlUpdateTransaction.Dispose();
_sqlUpdateTransaction = null;
Error log.
Error: [0x80004005] MonthlyFileDb::Seek - Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Thank you, I used beta_lockinfo and observed the following
spid=59/0/2
command = SELECT
appl=.Net SqlClient Data Provider
hostprc= 3640
dbname = DEV_ECAP_P_CAP_ENT_CMN
prcstatus= SUSPENDED
spid_ =
59/0/2
blklvl = 1
blkby = 55
rsctype =
locktype =
lstatus =
ownertype =
rscsubtype =
waittime = 785.139
waittype = LCK_M_IS
spid__ = 59/0/2
nstlvl = 3
inputbuffer = (@yearMonth int,@startCdrId bigint,@endCdrID bigint)EXEC P_GetCDRData @yearMonth, @startCdrId, @endCdrID
current_sp = DEV_ECAP_P_CAP_ENT_CMN.dbo.P_GetCDRData
spid=55
command = NULL
appl=.Net SqlClient Data Provider
hostprc= 3640
dbname = DEV_ECAP_P_CAP_ENT_CMN
prcstatus= sleeping
spid_ = 55
blklvl = !!
blkby =
rsctype = APPLICATION
locktype = X
lstatus = grant
ownertype = transaction
rscsubtype =
waittime =
waittype =
spid__ = 55
nstlvl =
inputbuffer =UPDATE UsgDetailCommon SET RunId = t2.RunId FROM UsgDetailCommon t1 INNER JOIN #UsgDetailCommon_Update t2 ON t1.YearMonth = t2.YearMonth AND t1.CdrId = t2.CdrId ;DROP TABLE #UsgDetailCommon_Update
current_sp =
But what is the solution for this...? I am googling and I found similar post but with no solution, here it is not allowing me to post html link
Similar Messages
-
HT201210 ITUNE IS SHOWING AN ERROR WHILE RESTORING AND UPDATING MY IPHONE 3G 8GB
Itune is showing n error while restoring and updating my iphone please tell me now what to do
usama1133 wrote:
Itune is showing n error...
And this ERROR would be...? -
Error while reading data for Virtual Infoprovider 0TCT_VC11 and 0TCT_VC12
Hi ,
The standard reports based on 0TCT_VC11 and 0TCT_VC12 are working fine in development system. When we moved the following objects to test system ,
0TCT_VC11 - 0TCT_IS11 & 0TCT_DS11
0TCT_VC12 - 0TCT_IS12 & 0TCT_DS12
We are not able to view data either in the MP nor at the report level.We face the following issue
There is still no data source assigned to VirtualProvider 0TCT_VC11
Error reading the data of InfoProvider 0TCT_VC11
Error while reading data; navigation is possible
Can anybody help me on this.
Regards,
Lavanya.Hello Lavanya,
Please activate the direct access for the virtual providers. Also note that it is only possible to use the BI admin cockpit in a myself system.
Please follow the below steps to activate the same:
TX: RSA1 ->Infoproviders-> Business Information-> BI Statistics->select
Virtual provider-> Go to context menu of the virtual cubes-> Activate
Direct Access. ( Eg virtual cube name )
Please also generate the reports by following the below steps:
RSRT -> Query name -> Generate Report.
Regards,
Arvind -
OS X Server 10.7.5: Wiki and Profilemanager "Error while reading settings"
"Error while reading settings" is all my Server says....great product....never had this
in the last five years with my Windows Home Server.
Error while reading settings in the Wiki and Profile Manager.
And the best is: No Support from Apple !!!!!!!! For Remaining: I've bought this server !!!!!!!!
One User helps an other......I'm getting sick.
The only solution i found: Hammering half a million commandes into the terminal......i hate it.
So what: Is there anyone out there who can help me whithout starting PostrSQL in 500 different ways ?
I've bought an Apple for not making all that ******** like in Linux
GG206
PS Excuse me for my Anger but i lost now 3 (!!!!!!!!) days (= over 30 hours) with this, and that makes me sick.I have this same problem. It is really frustrating. Have not found a single thing on the web that works.
-
Timeout error while running Report
Hi
All,
Windows 2000
Oracle Report builder 10g
Oracle developer suite 10g
when I had OLD computer i was able to run report more than 10 minutes. Now, I got NEW computer and i am getting TIMEOUT error while running report more than 10 minutes.
Any clue?
Thanks,
VishalAs Fs says it depends on how you're running the report.
If you're running via a server then you need to make the change on that server or amend the URL you are using to run the report to add the enginereponsetimeout parameter.
You can amend this parameter on the server either by using the Application Server Control as I described in my last post or by directly editing the config file. This file will be called <reportservername>.conf and can be found in the oracle_home/reports/conf directory.
In this file look for the engine tag and see if the engineResponseTimeOut property is set.
E.g:
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="20" callbackTimeOut="90000" engineResponseTimeOut="5">
</engine>
This value is in minutes so increase to a time larger than that it takes to run the report.
If instead you're running the report via Report Builder on your own PC then look for a file called rwbuilder.conf in the same location on your PC and make the same change as described above.
If this property isn't in the file then the engine isn't supposed to time out at all so the problem may well be something different. But to discount it try setting to a large value like 30. -
Error while trying to update to ios 5
I keep getting an error while trying to update to iOS 5. I update iTunes this morning to the lastest version so I know that isn't the problem. I have tried restarting both my computer and my phone, but contine getting "The iPhone could not be restore. An unknow error occurred (3194)." PLease help! Thanks in advance
I am also getting the error 43 when the update tries to back the phone up. Im using the latest version of itunes. This is on an iphone4, I am in the UK.
I tried deleting all of the historical backups to see if a fresh backup folder helps. It did not.
Ive tried running iTunes in 'administrator' mode on my Windows 7 machine. This made no difference.
Ive tried putting the phone in airplane mode. No difference.
I tried getting it into restore mode just to see if it worked on a iphone4. However it did not seem to want to do it.
Im not not too sure about proceeding with this update as I done want to loose any of the apps I have. (or 3 my 3 stars in every angry birds level on all 3 versions of the game!!)
Please someone, HELP !! !! -
Error while reading PO message when creating confirmation for PO
Hi all,
We are on SRM 5.0 SP 13. Extended Classic.
While creating confirmation for PO in the system,whenI click on the CREATE CONFIRMATION icon,I get the following error:
Error while reading PO in backend system.Inform System admin.
when I goto change the PO,I get the foll errors:
System of purchasing organization O 00000152 and purchasing group O 00000126 differ
Organization O 00000126 is not a purchasing group; Inform system administration
Organizational unit O 00000181 is not permitted as purchasing organization
Purchasing group O 00000126 is not assigned to purchasing organization O 00000152
On further analysis,I found that the issue is mainly because f the Porg /Grp assigned in the PO doesnt exist now in the org structure in PPOMA_BBP.
Can I change the Porg/grp now in the PO ?If so,how do i do that ?when i go to the dropdown for the Porg/grp it doesnt show me all of the current Porg/Grps maintained in the Org structure?How does the system determine which P org /grp to show in the value help for these fields under BASIC DATA tab in POu?
Please advise how I can get rid of this error.
Thanks!
Edited by: Rads1234 on Nov 29, 2010 7:40 PMHi Gurus,
We are on SRM 7 and we are currently facing the same issue.
In our case, when a PGroups is deleted and unassigned, an interfase from HR is raised and i the SRM PPOMA the Pgroup is not valid anymore and unassigned from the Purchasing Organization.
Once this happens, we face a blocking issue for all the documents created with Purchasing Groups that has been deleted.
These documents cannot be processed anymore and and error saying that Purchasing group is not assigned to purchasing organization... is raised.
Currently we are manually mantaining the validity of the Purchasing Group via PPOMA and transaction PP01. We put the validity to unlimited and the documents can be processed again.
Anyway we would like to avoid this manual update and to have a false information in te system where the PGroup will be shown as valid while it has been deleted in the past.
Could you please advise on the best solution on it?
Many Thanks in advance.
Best Regards,
Valentino -
Error while reading ID of own business system from the SLD for system DPI
Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PMHi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv... -
Error while reading access data (URL, user,password) for the Adapter Engine
Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
BalajiIt looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro -
Error while reading access data (URL, user, password) for the Adapter Engin
Hi all,
I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
Error while reading access data (URL, user, password) for the Adapter Engine
Is there any way I can resolve this? thanks all
Regards,
IXPossible reason is Adapter engine is not registered on SLD. Check in SLD.
You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
Lauch Visual admin go to Server > services > SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*. -
Error while reading deployment; Deployment problem
Hi,
I have written an ANT script that basically deploys a .war file to a remote
server. both the machines are UNIX based. Iam using wls8.1
My build.xml file looks like this:
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="dev" default="all" basedir=".">
<!-- This is configurations for deploying an application on wls8.1 on win2000
machine -->
<target name="deploy-mailClient">
<wldeploy action="deploy" remote="true" source="../applications/proxymon/proxy.war"
name="
myapp" user="system" password="g00db33r" verbose="true" adminurl="t3://153.2.255.51:8001"
debug="t
rue" targets="TestMon"/>
</target>
</project>
But when iam running this script, iam getting this error:
ant deploy-mailClientBuildfile: build.xml
deploy-mailClient:
[wldeploy] weblogic.Deployer -debug -remote -verbose -noexit -name myapp -source
/export/home/beamon/applications/proxymon/proxy.war -targets TestMon -adminurl
t3://153.2.255.51:8001 -user system -password g00db33r -deploy
[wldeploy] DeploymentData : Delete Files:false
[wldeploy] Timeout :3600000
[wldeploy] Targets:
[wldeploy] Files:
[wldeploy] null
[wldeploy]
[wldeploy] Unpexpected Error Initializing Deployer: weblogic.management.ManagementRuntimeException:
weblogic.management.ApplicationException: [J2EE:160029]I/O error while reading
deployment - java.io.FileNotFoundException: No such path: /export/home/beamon/applications/proxymon/proxy.war.
[wldeploy] java.io.FileNotFoundException: No such path: /export/home/beamon/applications/proxymon/proxy.war
[wldeploy] at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
[wldeploy] at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155)
[wldeploy] at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:467)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.access$000(DeployerRuntime.java:63)
[wldeploy] at weblogic.management.deploy.DeployerRuntime$1.run(DeployerRuntime.java:1499)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.checkAndPerformDeployerActions(DeployerRuntime.java:1490)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.activate(DeployerRuntime.java:186)
[wldeploy] at sun.reflect.GeneratedMethodAccessor480.invoke(Unknown Source)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
Source)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
[wldeploy] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
[wldeploy] at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
[wldeploy] at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
[wldeploy] at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
[wldeploy]
BUILD SUCCESSFUL
Total time: 9 seconds
Please give some solutions..........this is urgent for me. I really appreciate
your time on this.
-sI believe you need to go into your config.xml and add
ClusterConstraintsEnabled="false" attribute to the Domain element.
ie.
<Domain ClusterConstraintsEnabled="false" ...
Let me know if that doesn't do the trick.
-- Rob
steve wrote:
Thanks Rob. I also wanted to deploy an application to a cluster that would basically
contain 6 managed servers ....and now and as you just said, the Deployment would
fail if any one among these 6 is down......could be please recall and let me know
what is this parameter that i need to set so that even if there is any one/more
servers are down, still the Deployment could be achieved succesfully.
I really appreciate your advises on this .......thanks again.
-steve
Rob Woollen <[email protected]> wrote:
Steve wrote:
i started the server ....and everything went fine.
Question: suppose i have a cluster of 6 managed server, then do i alsoneed to
have all my 6 managed server up and runnning so as to have the Deploymentcompleted
?By default, the deployment fails if any of the targets are not running.
I believe there is an option to force it to deploy even if some
of
the targets are not up, but I don't recall the option. It isn't usually
what you want.
Question: How can i target deploying an application to a cluster usingANT script
as in my build.xml file. i.e i wanted to target to a cluster ratherthan to a
single server.Just say targets="name of your cluster". If you're unsure of your
cluster's name. Search for <Cluster> in your config.xml and you should
find it.
-- Rob
Thanks aton .....steve Gurnett
Rob Woollen <[email protected]> wrote:
That error indicates the Server or cluster TestMon is not currently
running.
-- Rob
Steve wrote:
Hi,
All I wanted to do is to deploy an application called "proxy.war"
from
a machine
called "A" to a machine called "B".
Iam running this ant script on machine "A".
Now as you just suggested.... this is how my build.xml file looks
like:
"build.xml" 13 lines, 468 characters
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="dev" default="all" basedir=".">
<!-- This is configurations for deploying an application on wls8.1on win2000
machine -->
<target name="deploy-mailClient">
<wldeploy action="deploy" source="../applications/ppmon/proxy.war"name="myapp"
user="system" password="g00db3
3r" verbose="true" adminurl="t3://153.2.255.51:8001" upload=true debug="true"
targets="TestMon"/>
</target>
</project>
This is the Exception that iam getting now:
ant deploy-mailClientBuildfile: build.xml
deploy-mailClient:
[wldeploy] weblogic.Deployer -debug -verbose -upload -noexit -namemyapp -source
/export/home/beamon/applications/ppmon/proxy.war -targets TestMon
-adminurl
t3://153.2.255.51:8001
-user system -password g00db33r -deploy
[wldeploy] DeploymentData : Delete Files:false
[wldeploy] Timeout :3600000
[wldeploy] Targets:
[wldeploy] Files:
[wldeploy] null
[wldeploy]
[wldeploy] Initiated Task: [5] [Deployer:149026]Deploy applicationmyapp on TestMon.
[wldeploy] Task 5 failed: [Deployer:149026]Deploy application myappon TestMon.
[wldeploy] Deployment failed on Server TestMon
[wldeploy] dumping Exception stack
[wldeploy] weblogic.management.ManagementException: [Management:149311]Therequest
to deploy "myapp" to server "TestMon" will be deferred till the serverbecomes
active.
[wldeploy] at weblogic.management.deploy.MasterDeployer.failTaskifServerNotUp(MasterDeployer.java:838)
[wldeploy] at weblogic.management.deploy.MasterDeployer.createTask(MasterDeployer.java:747)
[wldeploy] at weblogic.management.deploy.DeploymentTaskRuntime.start(DeploymentTaskRuntime.java:646)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethod)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
Source)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
[wldeploy] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
[wldeploy] at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
[wldeploy] at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
[wldeploy] at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
[wldeploy]
[wldeploy]
[wldeploy] Unpexpected Error Initializing Deployer: weblogic.Deployer$DeployerException:
Deployment exit status=1
BUILD SUCCESSFUL
Total time: 12 seconds
any ideas ??????Please Help !
-steve
Rob Woollen <[email protected]> wrote:
I believe remote=true means that the files should be resolved on
the
server rather that on the local client. Basically it gives you away
to
pass a relative path in and have the server use that relative pathon
its file system.
It doesn't sounds like remote=true is what you want. If the
client/server share a filesystem (eg a network filesystem) then you
don't need to specify any options.
If you want the client's copy of proxy.war uploaded to the server,then
set upload=true
-- Rob
Steve wrote:
Hi,
I have written an ANT script that basically deploys a .war file
to
a remote
server. both the machines are UNIX based. Iam using wls8.1
My build.xml file looks like this:
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="dev" default="all" basedir=".">
<!-- This is configurations for deploying an application on wls8.1on win2000
machine -->
<target name="deploy-mailClient">
<wldeploy action="deploy" remote="true" source="../applications/proxymon/proxy.war"
name="
myapp" user="system" password="g00db33r" verbose="true" adminurl="t3://153.2.255.51:8001"
debug="t
rue" targets="TestMon"/>
</target>
</project>
But when iam running this script, iam getting this error:
ant deploy-mailClientBuildfile: build.xml
deploy-mailClient:
[wldeploy] weblogic.Deployer -debug -remote -verbose -noexit -namemyapp -source
/export/home/beamon/applications/proxymon/proxy.war -targets TestMon-adminurl
t3://153.2.255.51:8001 -user system -password g00db33r -deploy
[wldeploy] DeploymentData : Delete Files:false
[wldeploy] Timeout :3600000
[wldeploy] Targets:
[wldeploy] Files:
[wldeploy] null
[wldeploy]
[wldeploy] Unpexpected Error Initializing Deployer: weblogic.management.ManagementRuntimeException:
weblogic.management.ApplicationException: [J2EE:160029]I/O error
while
reading
deployment - java.io.FileNotFoundException: No such path: /export/home/beamon/applications/proxymon/proxy.war.
[wldeploy] java.io.FileNotFoundException: No such path: /export/home/beamon/applications/proxymon/proxy.war
[wldeploy] at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:191)
[wldeploy] at weblogic.j2ee.J2EEUtils.getDeploymentInfo(J2EEUtils.java:155)
[wldeploy] at weblogic.j2ee.J2EEApplicationContainerFactory.initializeDeployment(J2EEApplicationContainerFactory.java:467)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.unprotectedActivate(DeployerRuntime.java:833)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.access$000(DeployerRuntime.java:63)
[wldeploy] at weblogic.management.deploy.DeployerRuntime$1.run(DeployerRuntime.java:1499)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.checkAndPerformDeployerActions(DeployerRuntime.java:1490)
[wldeploy] at weblogic.management.deploy.DeployerRuntime.activate(DeployerRuntime.java:186)
[wldeploy] at sun.reflect.GeneratedMethodAccessor480.invoke(UnknownSource)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:711)
[wldeploy] at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:690)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
[wldeploy] at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:947)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:908)
[wldeploy] at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
Source)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
[wldeploy] at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
[wldeploy] at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:353)
[wldeploy] at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
[wldeploy] at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
[wldeploy] at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
[wldeploy] at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
[wldeploy] at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
[wldeploy]
BUILD SUCCESSFUL
Total time: 9 seconds
Please give some solutions..........this is urgent for me. I reallyappreciate
your time on this.
-s -
DPM encountered an error while reading from the recovery point used for recovery.
Hi Guys I'm getting this error:
DPM encountered an error while reading from the recovery point used for recovery. Either the recovery point no longer exists or, if you
selected a share for recovery, the path to its contents is missing from the recovery point. (265)
The DPM Server is on Windows 2012 DPM is 2012R2 4.2.1273.0
The Server being backed up is 2012 R2 with DPM Agent 4.2.1273.0
The Server has 3 Data Volumes (C: Drive) and D and E its the D and E drive that i get this error if i try and recover data from DPM. the C Drive is fine. the D and E Drive are different
in that 1 De-dupe is enabled and 2 the Shadow Copies for these Volumes are stored on separate Disks F and G respectively.
I've removed the Protection from drives D and E and reinstated it but every recovery point created
brings up the same error message. I'm not sure where to go next do I need to Protect the Disks that have the Shadow copies on also? Many thanks in advance Gordon.Hi,
It seems you are in a configuration where the Windows 2012 based DPM server does not understand how to read Windows 2012 R2 Dedup data structure which is what the DPM replica volume is.
See the DPM supported and unsupported scenarios
here under the deduplication issues section.
We have a fix in DPM2012 R2 UR5 that will protect the Windows 2012 R2 dedup volume in a non-dedup state on the DPM Server, but unfortunately that will not allow previous recovery points to be read.
KB3021791-Description of Update Rollup 5 for System Center 2012 R2 Data Protection Manager
Backup job for dedupe-enabled volume on Windows 2012 R2 fails. For example, Data Protection Manager backup might fail for following setup:
Data Protection Manager2012 R2 is installed on Windows Server 2012.
Data Protection Manager is protecting a dedupe-enabled volume on Windows Server 2012 R2.
This also applied to restores as the above was for D2D2T backup that may fail as it needs to read the recovery point to back it up to tape.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
Unable to Log-in *SAP System Message : Error while reading a Dynpro*
Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. -
Error while reading the PO in the Backend system. Inform system admin
Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
TejaI am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna -
EHPI installer: Error while reading a dynpro. Stuck at Start Shadow First.
Hi Everyone,
I am dead in the water with my test install of EhP5 using the most current installer. This small test is on an older iseries, V5R4 with 8G memory. The SAP version is ECC 6.0 at sp Basis 23 and Applications at 19.
The install stops at Start Shadow First, but the instance and work processes are up on the server. The log- SAPehpiConsole reads:
Severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
Last error code set: RFC call to upg_is_shadow_system failed with key
RFC_ERROR_SYSTEM_FAILURE (open): Error while reading a dynpro
Please refer to these logs in the posted replys following this post for readability.
The shadow system work process wp01 log showsan RFC error as follows:
Wed Sep 14 11:29:58 2011
ABAP Program SAPMSSY2 .
Source Line 0.
Error Code DYNPRO_READ_FAILED.
Module $Id: //bas/720_REL/src/krn/dynp/dyrdypdb.c#3 $ SAP.
Function dy_dbread Line 100.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end no http/smtp
RABAX: end RX_BTCHLOG RX_VBLOG
Error while reading a dynpro.
C Wed Sep 14 11:33:59 2011
C *** ERROR => SQL-Error -204 in function db_open (dbsldb4.cpp 10630)
C {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=}_0
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
C Reopen: FALSE
B *** ERROR => dbdynpdb2: dbdd_dbtab_columns (DYNPSOURCE) failed with rc = 4
dbdynpdb2.c 2506]
B {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BZY=> unexpected return code 4 calling dbdd_dbtab [dbdynpdb 2508]
So I have a problem communicating with the shadow. Or is it a problem with the db_open?
From the test system I have an entry in SM59 to the shadow and I get this error when trying a connection test.
Error Details Error while reading a dynpro.
And trying to logon to the client sends the same message, it does not bring up the login screen.
OK. So in the 3 weeks that I have restarted, re-set and completely restored and restarted the install, I have always come to this point. I have search for similar issues and have done a review of pertinent notes etcu2026 Just as a comment, last year I successfully did the Ehp 4 upgrade without many problems on this same system using last years SAP system. In the month that I have been trying to do this, SAP has replaced the EHPI installer 3 times which indicates some problems on their part.
Any comments or suggestions would be greatly appreciated.
PatThe 2 logs from the installer are here.
The STARTSFI is as follows:
1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20110913144811")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Environment variables:
4 ETQ399 dbs_db4_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=0
1 ETQ206 Executing pre-phase DB specific actions.
3 ETQ399 Fixing IFS authorities for '/usr/sap/TEH/EHPI/abap/exe'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '15', GwService = 'sapgw15'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWI
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
repeats the rfc call with a fail until this final entry.
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
The DEVTRACE.LOG is here:
$ Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
trc file: "dev_disp.new", trc level: 1, release: "720"
sysno 15
sid TEH
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 100
intno 20020600
make single threaded, ASCII, 64 bit, optimized
profile /usr/sap/TEH/EHPI/abap/TEH/SYS/profile/TEH_DVEBMGS15_omni
pid 75851
kernel runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
length of sys_adm_ext is 376 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (15 75851) [dpxxdisp.c 1287]
#shared lib "dw_xml.so" version 100 successfully loaded
#shared lib "dw_xtc.so" version 100 successfully loaded
#shared lib "dw_stl.so" version 100 successfully loaded
#shared lib "dw_gui.so" version 100 successfully loaded
#shared lib "dw_mdm.so" version 100 successfully loaded
#shared lib "dw_rndrt.so" version 100 successfully loaded
#shared lib "dw_abp.so" version 100 successfully loaded
#shared lib "dw_sym.so" version 100 successfully loaded
#shared lib "dw_aci.so" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
rdisp/dynamic_wp_check : 0
rdisp/calculateLoadAverage : 1
Tue Sep 13 14:48:58 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >omni_TEH_15 <
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000050000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000050000010
DpShMCreate: allocated wp_adm_list at 700000050002970
DpShMCreate: allocated wp_adm at 700000050002b60
DpShMCreate: allocated tm_adm_list at 700000050006f90
DpShMCreate: allocated tm_adm at 700000050006fe0
DpShMCreate: allocated wp_ca_adm at 7000000504c6070
DpShMCreate: allocated appc_ca_adm at 7000000504d3b40
Directory: /usr/sap/TEH/EHPI/abap/log
Name: DEVTRACE.LOG
DpShMCreate: allocated comm_adm at 7000000504e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000005056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000005056e110
DpShMCreate: allocated j2ee_adm at 70000005056e150
DpShMCreate: allocated ca_info at 70000005056e950
DpShMCreate: allocated wall_adm at 70000005056e9d0
DpCommAttachTable: attached comm table (header=7000000504e1610/ft=7000000504e1620)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsStdUnamFileMapInit: ES base = 0x7000000a0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
Tue Sep 13 14:48:59 2011
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 13097]
Tue Sep 13 14:49:02 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( omni) [dpxxdisp.c 12339]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >omni_TEH_15 <)
DpStartStopMsg: start msg sent
Tue Sep 13 14:49:11 2011
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Sep 13 14:50:24 2011
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms.new", trc level: 1, release: "720"
[Thr 01] Tue Sep 13 14:48:39 2011
[Thr 01] MsSOsPrivInit: Run priority adjusted to 12
[Thr 01] ms/http_max_clients = 500 -> 500
[Thr 01] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 92
intno 20020600
make multithreaded, ASCII, 64 bit, optimized
pid 75850
[Thr 01] Tue Sep 13 14:48:40 2011
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 75850) [msxxserv_mt. 2274]
[Thr 01] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 01] load acl file = /usr/sap/TEH/EHPI/abap/TEH/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01] 1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
[Thr 01] 2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 01] MsHttpInit: full qualified hostname = omni.plastekgroup.com
[Thr 01] HTTP logging is switch off
[Thr 01] MsHttpOwnDomain: own domain[1] = plastekgroup.com
[Thr 01] *** I listen to port 3615 (3615) ***
[Thr 01] CUSTOMER KEY: >H1357713078<
[Thr 01] build version=720.2011.05.04
trc file: "dev_rd", trc level: 1, release: "720"
Tue Sep 13 14:49:07 2011
***LOG S00=> GwInitReader, gateway started ( 75855) [gwxxrd.c 1758]
systemid 327 (IBM i with OS400)
relno 7200
patchlevel 0
patchno 96
intno 20020600
make single threaded, ASCII, 64 bit, optimized
pid 75855
gateway runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
gateway (version=720.2011.04.20)
Tue Sep 13 14:49:10 2011
gw/reg_no_conn_info = 1
gw/local_addr : 0.0.0.0
gw/reg_no_conn_info = 1
SWITCH TRC-RESOLUTION from 1 TO 1
CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: Initalized shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1002.
CCMS: AlMsUpload successful for /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/log/ALMTTREE (0 MTEs).
Bind service sapgw15 (socket) to port 3315
GwIRegInitRegInfo: reg_info file /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/data/reginfo not found
GwPrintMyHostAddr: my host addresses are :
1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
2 : [127.0.0.1] LOOPBACK (LOCALHOST)
Full qualified hostname = omni.plastekgroup.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpIPCInit2: read dp-profile-values from sys_adm_ext
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000060000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000060000010
DpShMCreate: allocated wp_adm_list at 700000060002970
DpShMCreate: allocated wp_adm at 700000060002b60
DpShMCreate: allocated tm_adm_list at 700000060006f90
DpShMCreate: allocated tm_adm at 700000060006fe0
DpShMCreate: allocated appc_ca_adm at 7000000604d3b40
DpShMCreate: allocated comm_adm at 7000000604e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000006056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000006056e110
DpShMCreate: allocated j2ee_adm at 70000006056e150
DpShMCreate: allocated ca_info at 70000006056e950
DpCommAttachTable: attached comm table (header=7000000604e1
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 fro
Tue Sep 13 14:50:14 2011
GwDpInit: attached to gw_adm at 70000006056e110
Tue Sep 13 14:50:16 2011
DpSetProcessPriority: Run priority for gwrd adjusted to 12
Maybe you are looking for
-
I am having a list of problems with my phone. First, my music keeps starting and stopping and I can't get a song to play through. I went to the apple store and they told me I have some kind of damage so my dock connector thinks it's connected or som
-
Need to get rid of blue line under image
Hi, I've created a table with a row and three columns also I've placed splitted a button into three pieces and placed left portion in 1st column and right portion in last column and I've placed a piece of background image with repeat-x in middle colu
-
ICal creates hundreds of events
Hi. I just created a three day repeating all day event in April. To my horror iCal created not just the event I wanted but hundreds of other, separate events, though all in the same conferences calendar, lasting up to May 2010. Any ideas? I sync this
-
Hi, I've an anonymous right on the top tree of my directory (allow (read, search, compare)userdn = "ldap:///anyone";). I can't delete or modify this rule. I've a branch, ou=secret, with users. I want that administrators have all rights on this branch
-
Just updated to Lightroom CC but I still see Lightroom 5 on my laptop? I thought CC would replace 5?