TimeOut Exceeded in SMQ2- queue Block
Hi all,
I am having an issue with my production PI BOX. Not sure if there is any solution for this.
I have some interfaces in PI which expects huge payload data.Sometime the messages are getting failed in SMQ2 with error message " Time Limit Exceeded ". This is not happening with one particular interface message.Sometime teh queue got blocked for one interface and then the other day with some other interface.
When i tried to resend the same messages by selecting Execute LUW option, all of them have gone through fine. But we cannot do this manually everyday. I just wants to know where exactly the time out parameter has been maintained for pipeline processing.
The messages are getting timed out in receiver grouping pipeline step.
I have gone through the = Michal Blog : 3802 about the time out. But nothing helpful on that.
Could anyone of you help me out here?
Hi
We are using JDBC communication channels for all these interfaces. But messages are failing in SXMB_MONI .ideally it means that messages are still in Integration engine. right?
It doesn't send teh message to adapter engine
If we increase timeout level at adapter level, does it really help? If yes how come? Could you please explian?
Thanks
Rajesh
Similar Messages
-
SMQ2 - Queue blocked EVENT??
Hi there,
I am working on an SAP XI system and was wondering if anyone knows of a way to catch some sort of EVENT when a queue in SMQ2 gets "blocked"? I have looked for a Business Object but now luck......I know I can possible schedule a background job to "poll" the ARFCASTATE table I think? I think the table is something like that.....
I have also tried to find a user exit / BADI / enhancement spot that I may be able to trigger my own event from.....but no luck yet.....
Any ideas on how this could be done? I want to trigger a workflow when a queue gets blocked......
Thanks for the help
LyntonYou can write your program using this FM QRFC_LOG_CHECK which will check the queue log. Trigger the event using FM SAP_WAPI_CREATE_EVENT or if you want to just to notify someone, the simple Use FM SO_NEW_DOCUMENT_SEND_API1,if there a specific queue log found. Schedule this report on a periodic basis.
-
SMQ2 queue is blocked and messages are in u201Cwaitingu201D status in RWB
Hello,
A SMQ2 queue is blocked with XXX data and these messages are in u201Cwaitingu201D state in RWB.
What could be the reason?
Im sure its not because of the space because all the messages which flow after that was there in the directory.
Regards,
MathangiHi Mathangi,
double click on the queue and click on the first message which will direct to MONI
--> check what exactly the error is and try to resolve the error accordingly
if you are unable to do that
Right click on the first message and save LUV it will be saved in SMQ3
then unlock the queue and execute again it will process successfully..
later you can process the message which is saved
Regards,
Naveen -
Message Queue Blocking / MSGMNI Setting
Hi All,
Firstly, many thanks to all that can assists. I am currently getting Message Queue
Blocking messages in my ULOG files in my Tuxedo Application. (Tux ver 7.1 in Unix).
I am not sure what is causing this, but started to look into the Tux Config (UBB.MP)
and System message queue setting. Detailed as follows:
1)
Listed below is the system message queue setting:
set msgsys:msginfo_msgmni=2000
set msgsys:msginfo_msgmax=128000
set msgsys:msginfo_msgmnb=100000
set msgsys:msginfo_msgssz=256
set msgsys:msginfo_msgseg=25088
set msgsys:msginfo_msgtql=1550
set msgsys:msginfo_msgmap=1000
According to the BEA site, the MSGMNI is determined by this formula:
MSGMNI = MAXACCESSERS + 7 + (no. of servers with REPLYQ) + (no. MSSQ sets) - (no.
of servers with MSSQ sets)
The following is my current Tux. Config (UBB.MP) is set as :
- MAXACCESSERS = 2300
- Each servers (4 types in total) has its own REPLYQ and RQADDR.
- The same type of servers are set the same across 4 application servers.
Hence, my MSGMNI should be a minimum 2339 (ie. MSGMNI = 2300 + 16 + 16 - 0 = 2339).
But my current MSGMNI is 2000.
Would this contribute to my Message Queue Blocking?
Is my understanding correct and is this something I should change to avoid Message
Queue Blocking? Any helps and advice is much appreciated.Malcolm,
Your information and explanations behind these error messages are very useful.
It allow me to further understand Tuxedo internal processing and at the same time
give me a chance to start analysing these fields.
I am reluctant to ask further questions at the mean time. I will use your suggestions
as a starting point.
I will certainly keep you posted of the outcome when I have made the changes in
my UBB config and machine parameters.
Many thanks with your help/explanations Malcolm. It helps alot!
Cheers.
David.
"Malcolm Freeman" <[email protected]> wrote:
>
Hi David,
The MSGTQL reference you give (Solution S-00488) refers to the BEA MessageQ
product
and is not relevant to Tuxedo.
The error messages indicate that the queue buildup is probably due to
a restartable
server failing. What happens is this:
When a restartable server fails its IPC queue remains in place and continues
to
receive messages (which will be processed when the server restarts).
Depending
on the time taken to restart, the queue could become full and unable
to receive
any more messages, and this is probably why you got the message CMDTUX_CAT:1380
indicating that the BRIDGE process was unable to put a message on the
server's
queue.
A server is only restarted when the BBL does a SANITYSCAN check. If,
for example,
your SANITYSCAN interval is 300 seconds and your server fails immediately
after
the previous scan, then there will be a delay of almost 5 minutes before
the failure
is detected and the server restarted - plenty of time for the queue to
fill up.
There are a few things you could do:
The key thing would be to find out why the server is failing, and fix
the problem.
If this is not possible immediately, consider some of the other ideas
below.
Have several servers form an MSSQ to service this queue; then if one
fails the
others will continue processing the messages while the failed server
restarts
(this assumes, of course, that your application does not require the
messages
to be processed in strict order through the server).
Reduce the SANITYSCAN interval (but don't make it too small). This would
reduce
the average time taken to restart the server.
Increase the size of the IPC queue (MSGMNB) so that it can hold more
messages.
I'm not sure why you got a LIBTUX_CAT:1485 message, but this could be
due to a
BRIDGE failure as a result of the congestion.
The NETLOAD parameter would reduce the number of messages going to the
remote
machine, but only if the local machine offers the same service. If the
remote
machine is the only source of the service then NETLOAD will have no effect.
I
recommend you do a search of this newsgroup for postings on "load balancing"
there's some good stuff which will explain how load balancing works.
Depending how things go, it might not be a bad idea to open a case with
BEA Support
and ask for guidance (remember to submit your ubbconfig (or preferably
do a tmunloadcf)
together with the complete ULOGs from both the master and the slave machine).
Hope this helps some.
Regards,
Malcolm.
"Dave" <[email protected]> wrote:
Hi Malcolm,
Thank you for your reply. Interesting point you have made about theMSGTQL
value.
Based on your suggestion I went hunting around the BEA site and found
the following
snipplet:
"- The MSGTQL parameter must be set to a value greater than or
equal to the MSGMNI setting."
(http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_solution&answerpage=solution&page=msq/S-00488.htm)
If the above point is valid, then my MSGTQL is definitely way too low.
IF this
be the case, would you know of a method to work out what my MSGTQL bytes
value
should be?
Additionally, I have looked at other parameters which I could tune,and
would
adding a NETLOAD parameter in the *MACHINES section will reduce remote
servers
call? Which potentially, maybe reduce message queue blocking?
FYI:
The error messages I am seeing in my ULOG file are:
"LIBTUX_CAT: 1477 : ERROR .SysServerDied
LIBTUX_CAT: 1476 : ERROR: .SysServerRestarting"
Which then leads to message queue blocking
"CMDTUX_CAT: 1380 : ERROR: Message queue blocking prevented delivery,
Qaddr=..."
and potentially "LIBTUX_CAT: 1485 .SysNetworkDropped."
Many Thanks. Hope to hear from you (Malcolm) or other parties out there
that can
assists.
Thanks.
David -
Message Queue Blocking/MSGMNI Confirmations
Hi All,
Firstly, many thanks to all that can assists. I am currently getting Message Queue
Blocking messages in my ULOG files in my Tuxedo Application. (Tux ver 7.1 in Unix).
I am not sure what is causing this, but started to look into the Tux Config (UBB.MP)
and System message queue setting. Detailed as follows:
1)
Listed below is the system message queue setting:
set msgsys:msginfo_msgmni=2000
set msgsys:msginfo_msgmax=128000
set msgsys:msginfo_msgmnb=100000
set msgsys:msginfo_msgssz=256
set msgsys:msginfo_msgseg=25088
set msgsys:msginfo_msgtql=1550
set msgsys:msginfo_msgmap=1000
According to the BEA site, the MSGMNI is determined by this formula:
MSGMNI = MAXACCESSERS + 7 + (no. of servers with REPLYQ) + (no. MSSQ sets) - (no.
of servers with MSSQ sets)
The following is my current Tux. Config (UBB.MP) is set as :
- MAXACCESSERS = 2300
- Each servers (4 types in total) has its own REPLYQ and RQADDR.
- The same type of servers are set the same across 4 application servers.
Hence, my MSGMNI should be a minimum 2339 (ie. MSGMNI = 2300 + 16 + 16 - 0 = 2339).
But my current MSGMNI is 2000.
Would this contribute to my Message Queue Blocking?
Is my understanding correct and is this something I should change to avoid Message
Queue Blocking? Any helps and advice is much appreciated.Hi All,
Firstly, many thanks to all that can assists. I am currently getting Message Queue
Blocking messages in my ULOG files in my Tuxedo Application. (Tux ver 7.1 in Unix).
I am not sure what is causing this, but started to look into the Tux Config (UBB.MP)
and System message queue setting. Detailed as follows:
1)
Listed below is the system message queue setting:
set msgsys:msginfo_msgmni=2000
set msgsys:msginfo_msgmax=128000
set msgsys:msginfo_msgmnb=100000
set msgsys:msginfo_msgssz=256
set msgsys:msginfo_msgseg=25088
set msgsys:msginfo_msgtql=1550
set msgsys:msginfo_msgmap=1000
According to the BEA site, the MSGMNI is determined by this formula:
MSGMNI = MAXACCESSERS + 7 + (no. of servers with REPLYQ) + (no. MSSQ sets) - (no.
of servers with MSSQ sets)
The following is my current Tux. Config (UBB.MP) is set as :
- MAXACCESSERS = 2300
- Each servers (4 types in total) has its own REPLYQ and RQADDR.
- The same type of servers are set the same across 4 application servers.
Hence, my MSGMNI should be a minimum 2339 (ie. MSGMNI = 2300 + 16 + 16 - 0 = 2339).
But my current MSGMNI is 2000.
Would this contribute to my Message Queue Blocking?
Is my understanding correct and is this something I should change to avoid Message
Queue Blocking? Any helps and advice is much appreciated. -
"ORA-01144: File size (7680000 blocks) exceeds maximum of 4194303 blocks.
Hi Team,
While increasing the tablespace i am getting below error. How to handle this any one please suggest.
SQL> set lin 300
SQL> col TABLESPACE_NAME for a25
SQL> col FILE_NAME for a65
SQL> select TABLESPACE_NAME,FILE_ID,FILE_NAME,AUTOEXTENSIBLE,sum(BYTES/1024/1024) MB
2 from dba_data_files where TABLESPACE_NAME='SYSAUX' group by TABLESPACE_NAME,FILE_ID,FILE_NAME,AUTOEXTENSIBLE order by sum(BYTES/1024/1024) DESC,file_name;
TABLESPACE_NAME FILE_ID FILE_NAME AUT MB
SYSAUX 3 /ora2/oradata/dbname/sysaux_01.dbf NO 300
SQL> Alter database datafile 3 RESIZE 60000M;
Alter database datafile 3 RESIZE 60000M
ERROR at line 1:
ORA-01144: File size (7680000 blocks) exceeds maximum of 4194303 blocks
Regards,941829 wrote:
Hi Team,
While increasing the tablespace i am getting below error. How to handle this any one please suggest.
SQL> set lin 300
SQL> col TABLESPACE_NAME for a25
SQL> col FILE_NAME for a65
SQL> select TABLESPACE_NAME,FILE_ID,FILE_NAME,AUTOEXTENSIBLE,sum(BYTES/1024/1024) MB
2 from dba_data_files where TABLESPACE_NAME='SYSAUX' group by TABLESPACE_NAME,FILE_ID,FILE_NAME,AUTOEXTENSIBLE order by sum(BYTES/1024/1024) DESC,file_name;
TABLESPACE_NAME FILE_ID FILE_NAME AUT MB
SYSAUX 3 /ora2/oradata/dbname/sysaux_01.dbf NO 300
SQL> Alter database datafile 3 RESIZE 60000M;
Alter database datafile 3 RESIZE 60000M
ERROR at line 1:
ORA-01144: File size (7680000 blocks) exceeds maximum of 4194303 blocks
Regards,You must know that its really important to mention your db version and other details so that we can answer in a more proper manner. Since you haven't mentioned your db size and block size so here is a generic reply. If you are using 8kb Blocksize,you should be able to go till 32gb of one file(8192*4194303/1024/1024=>32G). So your solution would be to either go for a different file or use Big File(if you are on 10g and above) .
HTH
Aman.... -
ORA-01144: File size (4194304 blocks) exceeds maximum of 4194303 blocks
Hello all,
Wen i try to add new datafile(32GB) to tablespace i found the below error. I have space available in my disk, why i am not able to add new datafile to tablespace?
ERROR at line 1:
ORA-01144: File size (4194304 blocks) exceeds maximum of 4194303 blocks
here is my db_block_size information:
NAME TYPE VALUE
db_block_size integer 8192
How can i add new datafile with out any issues.
Regards,
RHKThanks,
I minimise the size, now i am able to add new datafile.
From long time back i am getting below error,
ORA-1653: unable to extend table PQB_ADMIN.RPT_TR by 128 in tablespace USERS
ORA-1653: unable to extend table PQB_ADMIN.RPT_TR by 8192 in tablespace USERS
to avoid this error i added new datafile. Now the data will sync automatically? (it may be nearly 2 months data)
Regards,
RHK -
Hi,
We are live with our PI7.1 system as of 11/6 and are seeing serious issues when a data error causes a sysfail for a SMQ2 queue. At this point the queue is locked for further processing. We have monitors setup which page us for this situation. However, we really need to prevent the queue from locking so other messages are sent even when one item is in sysfail status.
Notes 813209 and 1118297 do not seem to offer any help is this situation.
Is there a way to prevent the queue from locking due to sysfail status messages?
Any help is greatly appreciated.
Regards,
Rick TaylorRick,
Check out this blog..
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID1371322850DB11715461650132929943End?blog=/pub/wlg/2728
"For automatic qRfc failure recovery, schedule the report RSQIWKEX to run periodically. This report enables automatically resets the queues. "
I remember there is a way to put error messages in different queue so that current queue wont b lock anymore...I'll check and let you know.
Hope this will help.
Thanks,
Nilesh -
Hello Everyone,
Is there a way to delete the SMQ2 queues in SRM? We have thousands of records and we do not want to delete each queue manually.
Any help to get this?
Regards,
Khushbu.Hi Kushubhu
See the following link it may be helpful for you.
Re: Mass Delete of BDocs in SAP CRM system
with regards
Manjunath -
HI all,
In CRM system SMQ2 queue name R3AD_ACCOUNTING is getting system failed.
When iam trying to unlock,activate and Execute those queue entries(5677) its not working i am getting the Message that FUNCTIONAL MODULE DOES NOT EXIT for this iam deleting the queue entries one by one after checking each one.
This queues are coming from R3 because of sale/service billing document post. when i check in SMW01 i didnt get any information related to this queue.
Is it any other way to solve this issue. How to resolve ?
Do the needful..
regards,
shoki.HI,
when i check the queue entries i got the Functional module BAPI_CRM_SAVE,and queue name R3AD_ACCOUNTING, STATUS TEXT says that " Bdoc status failed,Bdoc not found".
system doesn't have dump errors too.
I came to know that when ever you get the message "Function module not found for this exception" for Queue entries we can delete that queue entry, but the problem is i have so many entries, Its not possible check one by one and delete?
sould i delete this all entries at once? Is it any solution?
Thanks,
shoki -
CMDTUX_CAT:1380: ERROR: Message queue blocking prevented delivery
Today, I changed a Tuxedo application (server) to the product systems(One master and two slaves). Only a small changes in code. But after a period of running, there are many errors in ULOG:
CMDTUX_CAT:1380: ERROR: Message queue blocking prevented delivery, Qaddr = 583902
And then, the server is died. After restart the server, this will happen again later.
I don't know why this happens? Thx.Hi Bill,
This is happening because the BRIDGE process received a message from the network and was unable to place the message on the intended IPC queue. This could be because the server handling that message is backed up, or the system IPC resource settings are too low. Please check the recommended actions in:
http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/messages/cdtux/cdtux013.html
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
.SysMachineMsgq: message queue blocking
Hi,
I am getting the following error message:
064222.hostname!TMSYSEVT.14351.3071440608.0: WARN: .SysMachineMsgq: hostname message queue blocking
Is there anyway to pinpoint exactly which application and or which service is causing the blocking?
Thank you,
IvanIvan,
You can look in the userlog for a "LIBTUX_CAT:672 ERROR: Message operation
failed because the message queue or the system is full" message. That will
tell you the process in which the msgsnd() failed, although it will not tell
you the specific queue that was full. If the queue full condition is not
something transient, you can use the "ipcs -q -a" command to examine the
number of bytes currently on each queue on the machine.
If you need to automate the process of searching the ULOG, the T_ULOG class
in TM_MIB(5) can be used.
The event message for the SysMachineMsgq event deliberatly contains very few
details, since the process where msgsnd() failed uses a message to inform
the event server of the failure and if a message queue is full, then there
might be a problem with sending a large message to the TMSYSEVT server.
(There is a check to prevent looping if the message send to TMSYSEVT fails.)
Ed
<Ivan Novick> wrote in message news:[email protected]..
Hi,
I am getting the following error message:
064222.hostname!TMSYSEVT.14351.3071440608.0: WARN: .SysMachineMsgq:
hostname message queue blocking
Is there anyway to pinpoint exactly which application and or which service
is causing the blocking?
Thank you,
Ivan -
Hi Experts,
The BASIS team has configured the CCMS alert for XBTI* and XBTO* queues in development system.
Hence we need to test the same.
Possibilities tried:
1. Huge payload
2. Stop and start of BPE this blocks the XBQ which is not needed as of now
3. Deregistering the specific queues. The queus is set to ready state until we register the same. Once registered the queue block is cleared. Hence this option is not helpful.
Kindly let us know the various ways to block the queues in PI.
Thanks
Suganya.Hi,
If you have any interfaces using EOIO queues then try failing the same at mapping level and check...
Another option is try failing the interface at mapping level by sending some invalid data for normal interfaces (EO) only and check...but in this case runtime may not block the queues all the times only few times and few circumstances it will block the queues...
HTH
Rajesh -
IO Exception: Lock timeout exceeded for documents , wait time = 60014
Hi,
We are getting an error while uploading any document on portal in KM content area. The full error details as follows
#D27E2001B003002500000D210005D0D20004520E6FF2B6FB#1216121868039#com.sapportals.wcm.repository.service.accessstatistic.AccessStatisticManager#sap.com/irj#com.sapportals.wcm.repository.service.accessstatistic.AccessStatisticManager#BMERRON#71986##<host name>_7664450#BMERRON#3f730c80526211ddb0fcd27e2001b003#SAPEngine_Application_Thread[impl:3]_4##0#0#Error##Plain###error while handling event - com.sapportals.wcm.WcmException: IO Exception: Lock timeout exceeded for <documents>, wait time = 60006
at com.sapportals.wcm.repository.service.appproperties.PropertiesService.setProperty(PropertiesService.java:984)
at com.sapportals.wcm.repository.service.appproperties.PropertiesService.setProperty(PropertiesService.java:1203)
at com.sapportals.wcm.repository.service.appproperties.PropertiesManager.setProperty(PropertiesManager.java:176)
at com.sapportals.wcm.repository.service.accessstatistic.AccessStatisticManager.updateLastReadDate(AccessStatisticManager.java:177)
at com.sapportals.wcm.repository.service.accessstatistic.AccessStatisticManager.received(AccessStatisticManager.java:253)
at com.sapportals.wcm.util.events.ReceiverEntry.doSend(ReceiverEntry.java:223)
at com.sapportals.wcm.util.events.EventBroker.send(EventBroker.java:86)
at com.sapportals.wcm.util.events.TransactionalEventBroker.send(TransactionalEventBroker.java:56)
at com.sapportals.wcm.repository.manager.ResourceEventBroker.send(ResourceEventBroker.java:219)
at com.sapportals.wcm.repository.manager.AbstractRepositoryManager.sendEvent(AbstractRepositoryManager.java:322)
at com.sapportals.wcm.repository.RMAdapter.sendEvent(RMAdapter.java:342)
at com.sapportals.wcm.repository.ResourceImpl.sendEvent(ResourceImpl.java:4206)
at com.sapportals.wcm.repository.ContentImpl.getInputStream(ContentImpl.java:119)
at com.sapportals.wcm.repository.ContentImpl.getInputStream(ContentImpl.java:132)
at com.sapportals.wcm.service.xmlforms.transformation.ResourceDemultiplexer.getContentStream(ResourceDemultiplexer.java:71)
at com.sapportals.wcm.service.xmlforms.transformation.Transformation.render(Transformation.java:209)
at com.sapportals.wcm.app.xmlforms.PreviewServlet.sendForm(PreviewServlet.java:165)
at com.sapportals.wcm.app.xmlforms.PreviewServlet.doGetAction(PreviewServlet.java:130)
at com.sapportals.wcm.app.xmlforms.XFBaseServlet.doGet(XFBaseServlet.java:241)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.wcm.app.xmlforms.XFBaseServlet.service(XFBaseServlet.java:134)
at com.sapportals.wcm.portal.proxy.PCProxyServlet.service(PCProxyServlet.java:333)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sapportals.portal.prt.core.broker.ServletComponentItem$ServletWrapperComponent.doContent(ServletComponentItem.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:242)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Any Help?
Regards,
SreeHi sreedhar Gunda,
Check whether the repositories are in active and running mode or not. If they are running fine. then check the authorization is sufficient from BASIS people.
points if useful
Thanks
Suresh -
Outbound queue blocked in CFM2
Hello folks,
I am trying to activate the integration model in CFM2 and I am getting message
"Outbound queue blocked"
Function/Q/SAPAPO/CIF_PROD_INBOUND
Text: NOSENDS
When I try to manually send the data in the queue in SMQ1 in the r/3, system asks me login to the SCM system and even though I give proper login, queue fails with the error message "Password logon no longer possible - too many failed attempts".But there is no issue with the login credentials.
Can you please helpme out here.
Thanks,
VikramHi
Although you may be entering the correct user and password, the user may now be locked. You need to check if the RFC user is locked and if so unlock then try again.
Regards
Ian
Maybe you are looking for
-
Memory on computer??
How can i find out or look up how much memory is used and how much memory I have left on my MacBook Pro computer?? And if, I am running low on memory on my computer how can I improve that?? Do I need to delete a few things?? check for viruses??? ect.
-
How to correct BED amount in internal excise invoice already posted?
Hello, Our client has entered an incorrect BED amount internal excise invoice. This incorrect BED amount is reflecting in RG23D. The internal excise invoice is no longer possible to change because it was already posted and the sales were already made
-
ACS v5.2 - Unable to update User integer attributes through File Operations
Hi, I have created some internal users on ACS v5.2 and added some Unsigned Integer attributes for each user. I am trying to do a bulk update of these integer attributes using the File Operation facility. However no matter what number I put on th
-
My phone wouldn't recognise unlock code so it wiped everything and when it rebooted I saw for the first time in 18 months that I needed a media card encryption code which was used to protect files so I presumed was the same as new unlock code but its
-
Where does one change the default formatting for a URL (href)
I want to have change the appearance of my href="#" tags so that they are not blue and underlined Want to do that with a CSS Do not know where to find and change the default setting in DW CS5 so that I make the changes globally Could I have different