Timeout on Client Proxy

Hi
When running an ABAP client proxy in an ECC system I get the following error message:
HTTP Response Contains status code 500 with the description of Timeout.
I have increased the HTTP timeout parameters to according to the blog (Points 1 & 2):
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
but with no success. Can anyone please advise further ?.
A point to note that this does not happen with all messages only larger ones.
Thanks in advance ...

hi,
>>the timeouts were increased by basis team on the R/3 backend and there was a restart following this.
I'd stay with my initial answer - it's http timeout parameter
maybe it was not done in a proper way by your basis
HTTP timeout is HTTP timeout - unless there is some more errors
which you did not see
BTW - about packages
I've never heard about anything like abap proxy packages
I don't think he meant any XI functionality
Regards,
Michal Krawczyk

Similar Messages

ABAP Client Proxy Timeout

Dear all,
A ABAP Client proxy has been generated to connect non-SAP web service. It runs successfully except it may time out when the web service method is running too long (over 1 minute).
We know timeout/keepalive value can be set at the ICM timeout parameter by using Tcode RZ11. However, can we set it at ABAP code? It is more convenient to override server settings.
Thanks!
Regards,
Thomas

Hi,
do changes as below
In SXMB_ADM
go to Configure Integration server
in change specific identifiers Set Runtime parameter: HTTP_TIMEOUT and then restart XI server, changes will be updated.
Regards,
Sukarna.

ABAP Client proxy authentification

Hi,
I created a client proxy via SPROXY that executes a webservice on SAP XI. I also created a logical port via LPCONFIG for the generated proxy class.
In my report i execute the generated method but when execute the report i always get a popup to enter user and password to make the connection to XI.
Is it possible to make a connection without having the popup to enter user and password? Is it possible to use a default user and password?
Thanks a lot,
Vincent.

Ravi,
I created a RFC of type G with following data:
Technical settings tab:
Target host: my_server
service no : my_serverno
path prefif : /rep
Logon & security tab:
basic authentication
ssl inactive
user username
password userpassword
*Special options tab
icm default timeout
http 1.0
compression inactive
compressed response yes
accept cookies no
Is this correct or do i have to make additional settings?
What is strange is that in SPROXY i can navigate thru the services on XI without any popup for userdata, but when i'm testing the generated client proxy in SPROXY i also get the popop for userdata.
Is it possible to give additional user data in the definition of the logical port?
Regards,
Vincent.

Scenario:client proxy

Dear experts,
-here my scenario is client proxy(file to file)
-Error is internal error
http_resp_status_code_not_ok
-when we check it in sxmb_moni sysyem cannot identify the receiver business system and receiver message ineterface
-how to solve this problem.
plz help me
regards
somesh

Hi,
1.Go to SM59 -
> INTEGARTION_DIRECTORY_HMI -
> Connection Test.
You should not get any error! If you get an error the consult with your basis team.
2.The server encountered an unexpected condition which prevented it from fulfilling the request.
Check whether you have given the right credentialsand also check the conditions which you have given whether any condition is false... If you are very sure that you have given right credentials then your problem will be solved by restarting J2EE engine
steps to restart J2EE engine
1) run transaction SMICM
2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
for more details on error code follow the link
http://www.web-cache.com/Writings/http-status-codes.html
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
http://www.helpwithpcs.com/courses/html/html_http_status_codes.htm
3) Check Pipeline URL-
should be
http://<hostname>:<port>/sap/xi/engine?type=entry
and not type=execute.
Need to check this value in your SLD> Business system> <yourIntegrationServer> --> Pipeline URL
4) Go to SM59 and check the Http destination -test connection-
Also check this blog-
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
For timeout check this-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Please reward points if it helps
Thanks
Vikranth

Client proxy from user exit

I am invoking a client proxy from user exit (user exit is invoked in update task). Is there any red flags I need to be aware of.
Proxy takes a while to execute and till that time, My original document does not get updated.

Hi Kris,
If it gives u Timeout error then only data will not be posted and it will be an issue.
If data posted from proxy then check in SXMB_MONI in Ecc side.
Regards,
Phani

Client proxy Null pointer exception

Folks,
I have a problem with ABAP client proxy. The scenario runs fine, but a few messages does not enter XI pipeline with a null pointer exception in RWB. When I click on Message Content of these errored messages, I get
500 Internal Server Error
SAP J2EE Engine/7.00
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: null], with root cause [java.lang.NullPointerException: null].
Exception id: [00096BDD38BA00480003206B00002EE7000447B40745C832]
The strangest thing is if I retrigger the same message for processing from ABAP proxy, the message gets processed successfully.
Even in the successfully reprocessed errored message, I am not able to view the message content. I am able to view the message content in SXMB_MONI with out any problem.
Any ideas what could be the reason.
Thanks in Advance.
Regards,
Jaishankar

Hi Ramakrishna,
I doubt Timeout is the cause for this problem coz. we used to get Time out errored messages apart from the Null pointer Exception messages. When I resend a Timedout message from RWB it gets processed sucessfully. But when I resend a null pointer exception message from RWB, the same error occurs again. Only if I resend the message from R/3 it is getting processed successfully.
I will try this setting too. Thanks for sharing.
Regards,
Jaishankar

Error in creation of client proxy.

Hello all,
I try to consume a webservice in SAP ABAP. When i create the service consumer proxy it is giving an error message llike
"Incorrect value: Unknown QName http://wholesale...........................sendeWholesaleMeldungRequest"
Have anyone come across this error scenario.
I m using SAP ECC 6.0.
Regards
Sandep.

Hi Sandeep,
--->While creating client Proxy object to consume the webservice a pop will raise with 4 radio buttons options,i think you had selected any one of that depending upon your requirement,rite,If not do that and try.
-->If you have the WSDL file in your local system select the Radio Button WSDL and import it into your Client Proxy.
-->Also create the Logical Port.
Thanks

** Logical Port in Client Proxy

Hi Friends,
I am doing proxy to web service scenario. My proxy is client proxy. After I created proxy, I checked that. There is no standard method 'EXECUTE_ASYNCHRONUS'. I read the Michal's blog /people/michal.krawczyk2/blog/2009/06/20/pixi-abap-proxies-say-goodbye-to-executeasynchronous-method and understand that this method is not created. The reason is that SAP_BASIS support package level is 15. (Release 700) in our R/3 ECC 6.0 system.
Now, I am not able to test my proxy from SPROXY tcode. It asks Logical Port.
1. Can you tell me, what is logical port ? How do I create this in LPCONFIG tcode ?
2. Once this is done, can I call the class with the method like in older version ?
3. Currently I am getting the information 'No vendor specified' while test proxy withe empty logical port.
Expecting your reply.
Kind regards,
Jegathees P.

Hi Rene,
If a logical port is not configured, the X/PI Runtime will be used instead.
In Jegathees' case, this is probably what happened. If you want to route your message through PI then you need to make sure that you are pointing to your Integration Server (i.e. PI), on ECC use transaction code SXMB_ADM --> Integration Engine Configuration. Role of Business System should be "Application System" and "Corresp. Integration Server" should be your PI server.
You will see when you test your client proxy (using TCode SPROXY) you have the option of choosing XI Runtime - or - Logical port too.
Regards, Trevor

Error at creating Client Proxy of external webservice (WSDL)

Hi Experts,
I try to create a Client Proxy Object out of an external webservice. Here is the WSDL URL:
[http://www.webservicex.net/CurrencyConvertor.asmx?wsdl]
I try to create it with this URL and then I get the error message
Not implemented
Exception of class CX_SIDL_INTERNAL_ERROR
I found two other threads with a similar problem:
cunsuming external webservice in ABAP
Problem while consuming external webservice
But there is no solution that worked for me. In the first thread it is mentioned, that the code between
<wsdl:binding name="XXXXHttpGet" type="tns:XXXHttpGet">
and it's closing brackets should be removed in a local file. I tried that and was able to create a client proxy object out of this local wsdl-file. But then I called the webservice with the folling coding for testing:
report z_currency_converter.
data: convert type ref to zzzco_currency_convertor_soap.
try.
    create object convert
exporting
    logical_port_name = 'Z_LP'
catch cx_ai_system_fault .
endtry.
   data: output type zzzconversion_rate_soap_out .
   data: input type zzzconversion_rate_soap_in .
   input-from_currency = 'EUR'.
   input-to_currency = 'USD'.
try.
call method convert->conversion_rate
exporting
    input = input
importing
    output = output
catch cx_ai_system_fault .
catch cx_ai_application_fault .
endtry.
write output-conversion_rate_result.
The same code worked fine in another system. In this "older" system could also create a client proxy, I think because it has a newer Support Pack version.
SAP says the following:
The problem is that this WSDL uses two bindings different from SOAP
binding which is not in conformance with Basic Profile 1.1 -
http://www.ws-i.org/Profiles/BasicProfile-1.1.html#WSDLBINDINGS .
I looked in the document, but I do not know where the problem in the WSDL file exactly is. What have I to change? Or can somebody give me the URL of a free webservice, that you used for creating a client proxy with a new support pack standing? In the "old" system there is not yet the SOAMANAGER but in the one where it doesn't work.
I hope you have an idea.
Thanks a lot in advance!
Best Regards,
Ingmar

I think it is the problem of version.U need to ask SAP to release some patch levels to correct it.
Regards
Snehasish

Error while creating a client proxy for CBR.RU

Hi!
I need to consume web service. Here is the link: http://www.cbr.ru/DailyInfoWebServ/DailyInfo.asmx?WSDL
I tried to make an own client proxy with SE80 transaction. (edit object->enterprise services -> client proxy -> create) After completing wizard an error occurs with text:
Incorrect value: Unknown Namespace http://www.w3.org/2001/XMLSchema
The same schema works perfecrly with this web service:
http://www.deeptraining.com/webservices/wsStrings.asmx?WSDL
In this case proxy class is created with no errors and everything is fine.
Could anybody let me know what's the reason of such bug, please? I'm not competent with XML schemas so it's kind of difficult to understand what's wrong with WSDL file from CBR.RU

Late response I know, but I have solved a similar problem recently and thought I would share.
Firstly, the problem is not with the namespace. The "Namespace ..." part is just stating the namespace the "Incorrect Value" has. So this error is complaining about the value "Unknown" - which isn't very helpful.
It appears the SAP SE80 importer does not like elements like the following because it can't understand <s:element ref="s:schema" />. It appears this is a common thing to be included in .NET generated WSDLs.
<s:element minOccurs="0" maxOccurs="1" name="GetCursDynamicResult">      <s:complexType>          <s:sequence>               <s:element ref="s:schema" />               <s:any />          </s:sequence>     </s:complexType></s:element>
SAP will also not like this example as it does not support mixed content (see: http://www.w3schools.com/schema/schema_complex_mixed.asp)
<s:element minOccurs="0" maxOccurs="1" name="SaldoXMLResult">
     <s:complexType mixed="true">
          <s:sequence>
               <s:any />
          </s:sequence>
     </s:complexType>
</s:element>
You can "Fix" the problem in both cases by removing the offending text in a local copy of the WSDL file so remove line 4 in the first example and change line 2 in the second to <s:complexType> the proxy can then be generated. No idea if the resulting service will be fully operational though!

Error while creating Client Proxy from SE80

Hi all,
I am trying to create Client Proxy with WSDL through SE80. There is no involvement of XI to create the Proxy.
I am using the option 'Local file' and uploading the wsdl file.
But I am getting the following errors.
"Proxy-Generierung: Fehler aufgetreten"
"Exception occurred in library handler"
"Illegal syntax: Element header has invalid enhancement attribute
http://schemas.xmlsoap.org/wsdl/:required"
If any one could understand them and worked in a similar scenario, pls help me out.
regards,
teja.

hi,
you might want to post the WSDL in question for us to have a look at.
but actually, the error message tells a lot:
http://schemas.xmlsoap.org/wsdl/:required
the second colon(, the one between wsdl/ and required, makes this expression an illegal one in any kind of a URI-like meaning (namespace, ref-URL, ...)
anton

Error while deploying Java Client Proxy

Hi Experts,
I developed a java client proxy.Since i do not have access to visual administrator, i uploaded the ear file to a folder in the XI box and asked the basis folks to deploy it.
On trying to deploy it on to the server they got the following error.
Details:
========
1) Error loading archive
    /usr/sap/XS1/put/R3Ear.ear
    (server side name is: /usr/sap/XS1/put/R3Ear.ear)
    com.sap.sdm.util.sduread.IllFormattedSduFileException: Error during attribute reading: received exception: invalid stored block lengths
What could be the reason for the error?

Hi
recreate your ear file and try to redeploy it.
it could be a zipping problem
Regards
Vishnu

ABAP Client Proxy from ECC 6.0 to XI message irregular recieving

Hi Gurus
Any one has come across issue whereby the ECC 6 system trigger ABAP Client proxy to SAP PI 7.0. The first time the PI is able to recieve it in the SXI_MONITOR. But subsequent trigger from the ECC 6.0 system the SAP ABAP program to trigger the Client Proxy, the PI seem to lost connectivity and did not recieve any message. This is pretty strange and hopefully someone in SDN and enlighten me.
Thanks
Regards
On behalf of malcolm

Hi Santosh
I went to SMQR and register the queue, but it still did not reflect the locked queue when i trigger the ECC 6 to SAP PI 7.0. The green flag - schedule still appear in the SXMB_MONI queue. But i am quite puzzle as why the ABAP client proxy after sending message the first time and second time, the third time it stuck? And also it is not practical to everytime go to the SMQ1 or SMQ2 to unlock the queue. I don't think it a good solution for solving my problem, it is just a temporary solution.

Error while generating client proxy

Hi All,
I have got a WSDL file for which I am generating the client proxy. It is giving me a dump saying that, memory is not sufficient while generating the proxy.
I have also contacted the basis team, even after increasing the memory... we are facing the same issue. Can anyone suggest any solution or SAP Note if there are any???
Thanks in advance.
Bhargava.

Hi,
Please find the dump details below:
ST22 DUMP:
Short text
    No storage space available for FORM stack.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    Try to find out (e.g. by targetted data selection) whether the
    transaction will run with less main memory.
    If there is a temporary bottleneck, execute the transaction again.
    If the error persists, ask your system administrator to check the
    following profile parameters:
    o ztta/roll_area            (1.000.000 - 15.000.000)
           Classic roll area per user and internal mode
           usual amount of roll area per user and internal mode
    o ztta/roll_extension       (10.000.000 - 500.000.000)
           Amount of memory per user in extended memory (EM)
    o abap/heap_area_total      (100.000.000 - 1.500.000.000)
           Amount of memory (malloc) for all users of an application
           server. If several background processes are running on
           one server, temporary bottlenecks may occur.
           Of course, the amount of memory (in bytes) must also be
           available on the machine (main memory or file system swap).
           Caution:
           The operating system must be set up so that there is also
           enough memory for each process. Usually, the maximum address
           space is too small.
           Ask your hardware manufacturer or your competence center
           about this.
           In this case, consult your hardware vendor
    abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each dialog process.
    Parameters for background processes:
    abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
           Restriction of memory allocated to the heap with malloc
           for each background process.
    Other memory-relevant parameters are:
    em/initial_size_MB:         (35-1200)
           Extended memory area from which all users of an
           application server can satisfy their memory requirement
Error analysis
    You attempted to extend a stack, but the required storage spac
    not available.
    Storage request..............: 8450048 bytes.
How to correct the error
    Please check whether uncontrolled recursive calls caused this
    runtime error.
    Try to decide by analysis whether this request is
    reasonable or whether there is a program error. You should pay
    particular attention to the internal table entries listed belo
System environment
    SAP-Release 701
    Application server... "dcr"
    Network address...... "10.1.105.112"
    Operating system..... "AIX"
    Release.............. "6.1"
    Hardware type........ "00C834224C00"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 4

Creation of client proxy for a WSDL with 2 port types??

Hi,
I am trying to consume an external web service from SAP - ECC6.0. The WSDL file has 2 porttype definitions - one for i/p and one for o/p
When I proceed with SE80 to create a client proxy, it asks me to select any one port type to generate the client proxy. If I select only the input port, it generates proxy for the input port alone.
In this scenario, how do I create proxies and configure logical ports, and call it from a single program to invoke the whole web servie with both i/p and o/p?
TIA,
Regards
Deepthi

Hi,
i. Import your message schemas from external definitions, or RFCs or IDocs from SAP systems. These definitions already contain data types.
ii. Create a message interface and reference the messages of the external definition, or the RFC or IDoc message.
Check this, it may help you
http://help.sap.com/saphelp_nw04/helpdata/en/3f/01623c4f69b712e10000000a114084/content.htm
REgards
Seshagiri

Timeout on Client Proxy

Similar Messages

Maybe you are looking for