Timeout-Parameter for XMLA-Interface

Hello everyone,
i am searching for a parameter like icm/conn_timeout or icm/keep_alive_timeout which applies to the XMLA-Interface.
I am sending MDX-Queries via the SAP BI Java SDK against our SAP-Server which sometimes result in "read timeouts".
Increasing XmlaConnectionConstants.TIMEOUT doesn't help so i need a server-side parameter.
icm/conn_timeout or icm/keep_alive_timeout (the values are in seconds, not milliseconds, am i right?) don't seem to work either, so there must be another parameter which applies to the XMLA-interface...

hi
Check this note 1044258.. it may help.
in case if it is MDX Query then check the Tags below
http://help.sap.com/saphelp_nw2004s/helpdata/EN/9f/9b8f3c855f0454e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/EN/9f/9b8f3c855f0454e10000000a11405a/frameset.htm
Hope it helps
Santosh

Similar Messages

  • CFQUERY Timeout Parameter for SQL2005 Fails

    Here's my test:
    <cfquery name="test" datasource="dsn" timeout="1">
      select top 20000 *
      from table
    </cfquery>
    <cfoutput>#cfquery.ExecutionTime#</cfoutput>
    I'm getting 3000+ for this value.  This shouldn't be, right?  Because I have the timeout parameter set for a second?  The driver I'm using is the one that's
    supplied with CFMX7.02, "Microsoft SQL Server", hooked into a MS SQL Server 2005 Standard.  Why is CF ignoring the timeout parameter?

    Hi,
    Anyone? I saw many articles in Metalink regarding the tx_timeout parameter - also one which a customer is demanding an explanation and enhancement on the tx_timeout parameter. Come to think of it, when will it work? only for Exchange? (found some hints on this in metalink).
    But still, is there no other way to immediately know if the port has opened or not?
    I will try the following: http://www.oraclenerd.com/2008/11/javaplsql-port-scanner-ii.html , but still would prefer a PL/SQL solution though.
    Many Thanks,
    Henry Wu

  • Display established connection timeout parameter for an ACE

    We are using an ACE Software version A2(3,5) and we try to diagnos a parameter map probleme.
    Is there a way to know what is the timeout parameter applied to an established connexion? The command "show conn address ip netmask mask detail" only show the elapse idle time.
    Thanks

    When one of our top management tries to access a particulat Dash Board in EP system for the first time in the morning
    he gets an error connection to partner timeout after 60 seconds
    He, he, he.... I wonder why thing like this always happen to the big chiefs...
    Anyhow... Does this happen to anyone else?... if not then it could be a name resolution issue... also check the exceptions on the proxy settings of IE.
    Regards
    Juan

  • Inccreasing the timeout  parameter for the Oracle R12 session

    Hi ,
    We have set profile ICX:SESSION TIME OUT to be 45. But it seems the session times out very quickly. How can this time out be increased ?
    WE are on R12.0.4.
    Best regards,
    brinda

    Hi brinda;
    Please check below and see its helpful for your issue,this topic discussed beforei belive you will get some answer(maybe more) in them
    EBS connection time out
    Re: ICX : Session Timeout
    Forms session timeout
    [Link1|http://www.solutionbeacon.com/best7.htm]
    Regard
    Helios

  • JCO timeout parameter?

    Dear all,
    We are trying to change a timeout parameter for JCO connections. We use ESS-MSS on our portal and when a user leave it without using the log off process, the system keep some RFC connections during one hour. We would like to keep those connections during only 30 minutes. Do you know how to proceed? Is there any parameter to change? 
    Please note that according to the note 947376 we know that 6 jco metadata connections are always alive to improve performance. But there are some others (for the users) that we would like to close automaticaly after 30 minutes.
    Many thanks for your help!
    Best regards,
    Olivier

    Hello Guys,
    Thank you very much for your answer. Is there a way to close all JCO connections automaticaly from the abap or java stack or should I set a timeout for each JCO?
    Thanks in advance,
    Olivier

  • Timeout parameter in Mail communication channel?

    Dear All,
    Can someone tell me if there is a option to put a timeout parameter in Mail PI channel like it is in File channel? One of my FTP channel used to stop polling abruptly, but using this parameter I fixed this problem completely. Now facing a same problem with one of the Mail channel.
    Thanks in advance for your response!.
    Best Regards,
    Kumaran

    Dear Ramesh & Bhavanishankar,
    Thanks for your response!.
    My concern is basically about the mail channel that stopped polling the source folder while the status says "Active". Due to this the interface is totally stopped working in PI and it starts working only when I restart the channel in CC monitoring.
    But yes, I have fixed this issue earlier for a diff mail channel by setting a restart every day (work around) using ATP. This really worked. But I cannot do this for every channel in my server.
    Best Regards,
    Kumaran

  • Timeout parameter in SolMan-ChaRM

    Hi,
    I need to know the parameter which decides the timeout for tcode SM_CRM in SolMan 7.1
    the ABAP gui closes after about 5 mins of inactivity whereas the web browser of tcode SM_CRM remains open for long time(about 1 hour)
    What are the parameters which decide these timeouts for both ABAP gui as well as web browser in SolMan Charm System.
    The reason behind the need to know this is the java threads in our systems are all getting consumed resulting in JAVA stack getting crashed.
    We suspect the SM_CRM is the culprit as it remains open for long time and this tcode is being used widely in our project.
    OS : AIX
    DB : oracle
    -Ujjwal

    Assuming you are talking about the timeout value for the web interface, it is in the {installdir}/ocas/conf/ocwc.conf file. The parameter you want to change is ssn_timeout. I believe you will need to restart ocas to make it effective.

  • Timeout parameter in standalone oracle calendar 10.1.2

    I'm trying to locate the timeout parameter in oracle calendar 10.1.2. I have a standalone version. Any help would be appreciated.
    Thanks.

    Assuming you are talking about the timeout value for the web interface, it is in the {installdir}/ocas/conf/ocwc.conf file. The parameter you want to change is ssn_timeout. I believe you will need to restart ocas to make it effective.

  • Format of "JMS Message Destination Parameter" for JMS Sender Adapter

    Hi,
    I am trying to use the JMS Sender Communication Channel for several Interfaces by using the "JMS Message Destination Parameter". Currently, the Comm.Channel is reading the message and puts it back on the queue with the following error:
    Fehler bei der XI-Eingangsverarbeitung für Message am bzw. um 2007-07-25|09:34:12.057+0200. JMS- und XI-Identifikatoren für die Message sind ID:414d512051535749515441302020202046a4e892201c4d04 bzw. 701ec850-3a81-11dc-8176-00306e2c36a3. Der JMS-Adapter führt einen Rollback der Datenbank und der JMS-Sitzungtransaktionen durch. Wird die Sitzung ausgeführt, geht die Message nicht verloren und wird später erneut durchgeführt. Der Ausnahme-Stack-Trace ist java.lang.RuntimeException: MQJMS0003: Destination not understood or no longer valid: UserCreateRequest
    at com.ibm.mq.jms.MQDestination.createDestination(MQDestination.java:790)
    at com.ibm.mq.jms.MQSession.createDestination(MQSession.java:1092)
    at com.ibm.jms.JMSMessage.getJMSDestination(JMSMessage.java:4127)
    What is the format I will have to fill this parameter with in order for XI to understand it? I have tried the following so far which did not work:
    1.   (as in error message above)
    Help much appreciated.
    KR,
    Colin.

    One option in BPEL is to have a mid process receive, but this would require you to handle the Correlation of the message with BPEL process instance.
    Please refer the following section in SOA Guide for the same.
    Using Correlation Sets and Message Aggregation - 11g Release 1 (11.1.1.7)
    Please note the example is with File adapter but the same can be achieved for Any Adapter.

  • How to change timeout parameter value in Oracle 10g R2

    Anyone knows how to change timeout parameter value in Oracle 10g Database R2?

    Waheed Azhar wrote:
    actually i am getting ORA-01013 exception which directly relates to the timeout value but i think it's hidden parameter...What makes you think it's a hidden parameter?
    A search of MetaLink for that error turns up a number of hits, most of which a very situational specific. Exactly what are you doing when you get this error? Are you connecting over an ODBC connection? Are you getting it on a connection request? At db shutdown? During a long-running query?

  • Is it possible to move some tools or their setting parameter from Configuration interface to Inspection Interface?

    Hi
    We use Vision Builder for machine vision. There are two interfaces in Vision Builder (Inspection Interface & Configuration interface). It is better machine vision operator would work with Inspection Interface and he should not access to all of setting and tools but he need to redefine some parameter like RIO in some tools like measuring tools for different products.
    Is it possible to move some tools or their setting parameter from Configuration interface to Inspection Interface?
    Or is it possible to define security like password to some tools and their setting but not all of them?
    Thanks
    Refa

    Vision Builder generally isn't supposed to rely on user input, but there is a step called "User Input" that allows you to get input from the user. ROI would be tricky. I think the slickest way to do that would be to create a VI that displays the image, lets the user drag a rectangle, then pass those coordinates back to Vision Builder to configure the ROI.
    Tanner B.
    Applications Engineer
    National Instruments

  • Cannot get a connection, pool error Timeout waiting for idle object

    my connection pool setting is
      maxActive="3" minIdle="2"                maxWait="10000"              removeAbandoed="true" logAbandoned="true"         removeAbandonedTimeout="30"         autoreconnection="true" 
    we have 7 people hitting the group of search functions ,
    about 3 minutes I get
    I got error like
    org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot get a connection, pool error Timeout waiting for idle object         at org.apache.tomcat.dbcp.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:104)         at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)         at Deferment.showResult.checStudent(showResult.java:135)         at Deferment.showResult.doPost(showResult.java:99)         at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)         at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)         at org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:402)         at org.apache.catalina.servlets.InvokerServlet.doPost(InvokerServlet.java:170)         at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)         at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    I just wonder
    1) Cannot get a connection, pool error Timeout waiting for idle object-> cause by connection pool leaking or other problem.
    2) Setting the maxactive to -1 ( suggestion from Google) , if I set my connection to ulimit , waht should I put on minIdle="2"
    3) How can I test my connection pool have problem or not ? is
    SHOW PROCESSLIST; tolding me someinformation? I use Mysql
    Thank you!

    I try something like ps2 = conn.prepareStatement(target);
                ps2.setString(1, UNumber); // set input parameter
                rs = ps2.executeQuery();
                sendMail = 0;//how many rows we can find.
                while (rs.next()) {
                    sendMail++;
                ps2.close();
                rs.close();
                conn.close();
      if ((count1 == 0) || (count2 == 0)) {
                    conn.rollback();
                } else {
                    conn.commit();
                    conn.setAutoCommit(true);
                ps.close();
                calstat2.close();
                conn.close();
    calstat = (CallableStatement) conn.prepareCall("{call findStudent}");
                calstat.executeQuery();
                calstat.close();
                conn.close();is that enought? what else I should do to make sure I did close all the connection, after I use it ?
    thank you

  • Timeout Parameter

    Hi Guys,
    I fi want to increase the time out parameter for the ODI to database connection, shall i have to increase it from 30 sec to a minute, where should i put it.

    The Oracle Data Integrator Timeout parameter is set in the ODI Designer and Operator tool menu bar from File > User Parameters.
    The default value is 30 seconds.
    Modifications of these "User Parameters" only impact the local ODI client on which the modifications have been performed. This is to say, the local "userpref.xml" file which is present in the local installation of ODI from which the GUI (Designer, Operator...) has been launched.
    If it is necessary to propagate these modifications to other ODI set ups (including Agents or not), then:
    * The local (modified) "userpref.xml" file must be copied to the appropriate, remote ODI "/bin" folder and
    * The ODI processes must be stopped and relaunched.

  • 403 error (forbidden) when trying to acess xmla-interface

    Hello everyone,
    when i am trying to access our xmla-interface http://server:8000/sap/bw/xml/soap/xmla
    i get this error:
    Service cannot be reached
    What has happened?
    URL http://server:8000/sap/bw/xml/soap/xmla call was terminated because the corresponding service is not available.
    Note
        * The termination occurred in system VIA with error code 403 and for the reason Forbidden.
        * The selected virtual host was 0 .
    What can I do?
        * Please select a valid URL.
        * If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:vmsk3010_VIA_00-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    Your SAP Internet Communication Framework Team
    But http://server:8000 is reachable. What could be the problem?
    Is the xmla-service unavailable?
    And if so, how can i activate it?

    Thanks for the reply - that is all good info.  Interestingly enough, I found a work-around for this issue that is directly related to your comments.  I cannot tell you much about the web server, as I do not control it.  I can tell you that my space has a public_html folder for "public" (non-password) pages and a public_shtml for "private" pages.
    Here is what I did and then had to do to work-around:
    Web site was first created using DW CS4 on a *MAC*
    I used WEBDAV to upload to my server space (FTP was not working for me)
    WEBDAV put the files in the root, I had to then move them manually to public_html
    At this point I got the Forbidden error
    On a whim, I downloaded the files to my *PC* desktop via Internet Explorer web folder using the webdav address to gain access
    I then immediately uploaded the files back to the public_html folder from my PC, overwriting what was there
    I tested again, and it works fine
    So this definitely smells like a permissions issue, but I guess I'm not sure where that issue lies.  Is it with a setting in Dreamweaver or with the server?  I am going to call their tech support to see why FTP does not work (it is SFTP with a bunch of other security).  I assume that FTP is the better/cleaner way to synch DW files to the web server?
    The second question, and maybe this is for another thread, is how to I tell Dreamweaver that when it does a webdav synch, to put it into the public_html folder and not my root folder?
    Thanks so much for your reply!  I really appreciate your time and assistance!
          -Mike

  • Increasing the timeout parameter in ODI

    Hi,
    I have got 7000 error code in a step while executing the scenario.
    I have found out it may be time out error and it can be resolved by changing the timeout parameter in ODI(File->Userparameter->Oracle Data Integrator Timeout)
    Is there any maximum limit for this timeout parameter? After changing this, should i restart the ODI server?
    Can anyone suggest me quicly please?
    Am i proceeding correctly for this 7000 error code?

    Hi,
    Please post this question in the ODI forum:
    Data Integrator
    Thanks, Mark

Maybe you are looking for