Timeouts/page not found/disconnect on xbox live

Hi all,
Any ideas as to how i can find why my previously stable connection is now constantly timing out on trying to view web pages/connect to xbox live.
hub (3a) is not disconnecting from the internet but i cant browse the internet from my computer/phone/tablet without having to constantly refresh pages due to timeouts.
i have tried to run tracert when i am having a problem but it just timeouts at the 1st step.
it will even timeout trying to access the homehub when it is having one of its now frequent moments.
Solved!
Go to Solution.

have you tried a different router just because it says its conected with the lights on the front doesnt mean it is. I had the same problem swapped the router out and bobs your uncle .

Similar Messages

E2000 Constantly disconnects from XBOX Live

I'm not having an NAT issue, but my e2000 is constantly disconnecting from XBOX Live. About every 3-5 minutes I get disconnected. My wireless is working perfectly, this is only an issue with XBOX Live.
I've followed all the examples on the forums here, like:
http://homecommunity.cisco.com/t5/Wireless-Routers/Need-HELP-to-change-NAT-type-to-open-on-Linksys-E...
and
http://homecommunity.cisco.com/t5/Wireless-Routers/Open-NAT-xbox-live-problems/td-p/337375
and I have double checked every setting. I'm not sure what is causing this issue.
I've set the MTU, unchecked UPnP, entered port forwarding range to XBOX's static IP address, and set the DMZ to my XBOX's MAC address.
So, what is causing my router to constantly disconnect?

Try the following steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
1] Open the software and go to the option which says "Router Settings"
2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
3] Then Click on wireless Tab select Channel Width to 20 MHz only and Channel to 6, 9, and 11. Click Save Settings....
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

OC4J AJP13 Firewalled Connection, Page Not Found and Action Cancelled

I have a J2EE application that works fine within the company intranet, however the live internet available version is plagued by Action Cancelled and Page Not Found Errors. We also get some queries that hang.
Having recently switched from Apache2/Tomcat to OHS/OC4J (10gR2), through a halfway house of Apache2/OC4J, I can also state that the problem occurs on these platforms as well. The operational application only uses SSL connections.
According to our Firewall team idal connection timeouts are in the order of six hours, and we have tried opening all ports between the Web Server and Application Server, just in case we were blocking something, all to no avail.
We also sometimes get the ie popup for changing between secure and unsecure objects, or displaying secure and unsecure objects, despite having those popups disabled in the browser. The only HTTP call shown within the HTTP trace is a random call from the browser to CONNECT to the application secure base URL which points to a splash page. I have no idea where this is coming from.
The application concerned is Business Objects.
Any thoughts.
Interestingly, when I activate Fiddler, the Microsoft IE HTTP(S) monitor the problem goes away, except for the page hangs which occur when a jsp script requests data.
I can modify any parameters relating to mod_oc4j, OHS, and the application container.
Message was edited by:
thephona

check your web.xml and struts-config.xml file . Are they correct ? . i mean validate them.
also are you facing this error in a particular request or in every request.

Page not found error getting while access endeca application

Hi All,
I am trying to create an application in endeca. Created application , ran neccessary scripts and created pages in experience manager.
but when i try to call the application in browser . i am getting page not found error. There are some other application which is created by copying discover electronics ,
which works fine. Please help me how can i resolve this issue. I am using endeca 3.1.0.
Thanks
Mark

There's not much to go on here, but it sounds like you're trying to view changes in a "live" application. To confirm this, you should execute the configuration promotion script and then check the same application URL. You can run the promote script from inside workbench. Log in as admin, then look under "Workbench Home > Administration > Admin Console > Scripts." You should execute the "PromoteAuthoringToLive" script. Once this script is complete, then test your page again.
If this works, then it means that your application is configured such that it doesn't get immediately notified of new configuration changes, i.e. it's configured in "live" mode.

"Page not found" error while trying to run a page

Hello all,
I tried to run a page in JDeveloper(9.0.6.6_606) and after the browser page pops up, it is displaying "HTTP 404 : Page not found" error.
Please find the log below:
C:\jdevbin\jdk\bin\javaw.exe -ojvm -classpath C:\jdevbin\j2ee\home\oc4j.jar -mx256m -Dhttp.proxyHost=proxy -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=10.200.152.236|localhost -Xverify:none com.evermind.server.OC4JServer -config C:\jdevhome\jdev\system9.0.3.1.1107\oc4j-config\server.xml
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
[waiting for the server to complete its initialization...]
Embedded OC4J startup time: 7047 ms.
Oracle9iAS (9.0.3.0.0) Containers for J2EE initialized
Embedded OC4J startup time: 16 ms.
Target URL -- http://10.200.152.236:8988/OA_HTML/runregion.jsp?page=%2Foracle%2Fapps%2Fpos%2Faccount%2Fwebui%2FNonPoInvCreatePG&akAppShortName=POS&akDbcFile=FIN1DEV2&akDevMode=1&akDiag=1&akPassword=pwd4dev2&akRespKey=ISUPPLIER_PORTAL_RESP&akUsername=dpsdx48&JRAD_XML_PATH=C%3A%5Cjdevhome%5Cjdev%5Cmyclasses%5CJRADXML%5C&JRADStartTime=1152606872484
ApplicationServer: appName = bc4j
ApplicationServer: appName = current-workspace-app
ApplicationServer: appName = soap
Error creating the ORB :
Starting an OA Core session ...
ICX DIAGNOSTIC: application_id = 177
ICX DIAGNOSTIC: responsibility_id = 23075
ICX DIAGNOSTIC: security_group_id = 0
ICX DIAGNOSTIC: APPS Web agent = http://app-fin1dev2.albertsons.com:15160/pls/FIN1DEV2/
FIN1DEV2=C384A6C2A84C8E63FAA51365BA91681A;path=/;domain=.albertsons.com
ICX DIAGNOSTIC: mCookieHeader = FIN1DEV2=C384A6C2A84C8E63FAA51365BA91681A;path=/;domain=.albertsons.com
ICX_DIAGNOSTIC: mEncryptedSessionID = C384A6C2A84C8E63FAA51365BA91681A
ICX_DIAGNOSTIC: mSessionID = 687703439
TIME: runregion.sessionBean.createSession [87296 ms]
ICX_DIAGNOSTIC: mTransactionID = 78453
ICX_DIAGNOSTIC: encryptedTransactionID = C974A13EBB894B23
TIME: runregion.sessionBean.createTransaction [9672 ms]
TIME: runregion.rest [0 ms]
Is there anything you think I am missing in the configurations?
Kindly help.

I am also using OA Framework Jdeveloper....for ADF BC development.. Please find the log below:-
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\config>
E:\jdeveloper\jdevbin\jdk\bin\javaw.exe -client -classpath E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar;E:\jdeveloper\jdevbin\jdev\lib\jdev-oc4j-embedded.jar
-Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true
-Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config
E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Oct 18, 2007 11:56:47 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Oct 18, 2007 11:56:47 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\xml.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml) has the same filename but is not identical to
/E:/jdeveloper/jdevbin/lib/xml.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it
contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\jazn.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml) has the same filename but is not identical to
/E:/jdeveloper/jdevbin/j2ee/home/jazn.jar (from <code-source> in META-INF/boot.xml in E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it contains different
versions of the same classes, it will be masked as the latter is already visible in the search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevbin\jdev\appslibrt\jazncore.jar (from manifest of /E:/jdeveloper/jdevbin/jdev/appslibrt/jazn.jar) has the same
filename but is not identical to /E:/jdeveloper/jdevbin/j2ee/home/jazncore.jar (from <code-source> in META-INF/boot.xml in
E:\jdeveloper\jdevbin\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the
search path of loader default.root:0.0.0.
WARNING: Code-source E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib\uix2.jar (from
WEB-INF/lib/ directory in E:\jdeveloper\jdevhome\jdev\system\oracle.j2ee.10.1.3.39.81\embedded-oc4j\applications\datatags\webapp\WEB-INF\lib) has the same
filename but is not identical to /E:/jdeveloper/jdevbin/jdev/appslibrt/uix2.jar (from <library> in
/E:/jdeveloper/jdevhome/jdev/system/oracle.j2ee.10.1.3.39.81/embedded-oc4j/config/application.xml). If it contains different versions of the same classes, it
will be masked as the latter is already visible in the search path of loader datatags.web.webapp:0.0.0.
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 19594 ms.
Target URL--- http://hydhtcl33997.ad.infosys.com:8988/SRTutorialADFBC-UserInterface-context-root/faces/app/SRList.jspx
07/10/18 11:56:56 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized

Login 404 Page not found error

I am having problems with my login mechanism.
I have form based authentication configured in my Web.xml. I have implemented the login mechanism from the SRDemo Example therefore I have a index.jsp which does a redirect to my first jspx page and a login.jsp which contains a form with username and password input types and a button which submits the form to the action="j_security_check".
When a user accesses the application, the index.jsp is called which does a redirect to the first page in my application "Customers.jspx". When the authentication fails, then the login page is displayed, and I think the redirect URL (Customers.jspx) is placed into the session by the framework for later use i.e. until the user authenticates. Once authenticated, the user is directed to the Customers.jspx.
The login pages works fine except for the following condition. When I sit at the login page until the session timeout occurs, then when I try to log-in, I get a 404 error "Page not found". I am guessing that the forward URL to my customers page is lost when the session times-out.
A lot of guessing but is any of this true. Can anyone shed some light on this one and suggest where I am going wrong or if there is a fix to the problem.
Many thanks,
Michael.

Hi,
correct. The server keeps track of the redirect page and if the session is lost, this information is lost too
Frank

Sign on screen up, but trying to sign on returns page not found

Hullo,
had this issue on a LIVE instance running 11.5.10.2 (11.2.03 on RHEL 5.5) last week
Users could not connect (or work) to or in i Expenses. The sign on screen was up, but trying to sign on returned a page not found error.
I checked Apache processes and there were around 20 of them.
Apache was running.
I decided to bounce Apache and this resolved the error.
I suspect that it wasn't Apache that was the problem (since there were many Apache processes running). What was the real issue? A module?
Any helpful tips will much much appreciated.
Happy Christmas.
PS: Is simply grepping for Apache enough to confirm that it is running (as well as checking adapcctl.sh status)? Why are there over 25 Apache processes running - even when I check on an instance that no one is using??
Thank you again.

Hi,
Please review the below notes:
Servlet and JSP Pages return a "Page Not Found" Error After Install of Applications (Doc ID 372096.1)
"Unrecognized Option: -Client,Could Not Create The Java Virtual Machine." With Applications 11i (Doc ID 358061.1)
Getting Http 404 Error On Punchout To External Supplier Oracle XML method (Doc ID 264471.1)
Thanks &
Best Regards,

"Page not found" error after 5 minutes of see "processing" on the screen

We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
Thanks,
Jim

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

Page not found in ABAP Workbench

Hi,
I have installed ABAP Development Workbench included in "ABAP Objects" book. When I do SAP logon and bring up ABAP Development Workbench, I do not see the Object lists in the object navigator and instead "Page not found" error shows up. Can anyone help please ?
Thanks
Abdulla

We trialled upgrade of sapgui from 6.40 to 7.10 +patches.
One my laptop and another one with 710 I get se80 unable to display page in dev, quality, live 4.7 systems.
On another laptop with 710 se80 ok on my login and another userid in live, but not in quality, dev.
Similar problem with "title" area of ALV grid when FB00 line items + Grid option active, eg fbl5n.
On reverting to 6.40 gui se80 ok.
Suspect other software on pc, eg IE, .Net, Java, and settings per SAP system.
Can anyone clarify?

Page not found error after logging into oiddas

Hi all,
I have configured reverse proxy setup for my application server. from external portal is accessible( with proxy hostname externally and internally after login from internet) and also sso server administration site (same as portal ) but when i am trying to access oiddas page i am not able to login and i am getting page not found error. for ssocfg.sh i have given proxyHostName and proxyPort with https and i can see external name and it is redirected with external name for sso authentication but when i logged in i am getting page not found with http 404 msg and i have followed many docs in metalink w.r.t this error but couldn't resolve after too many trials and registrations. could someone help me on this. let me know if you need any information my internal address is http://localhost.localdomain.com:7777/ external(proxy)- https://portal.localdomain.com/
Thanks

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

Page Not Found ! Export/import translater app

Hi,
I really need some help since we are supposed to go live today or tommorrow.
1- Can I open TARs for issues concerning HTMLDB ??
2- I have an application that is translated 105-2105
When I import 105 into another application ID, and try to run it , it gives me a page not found ??
Thanks
Francis.

Hi Kirk,
1. Do I understand correctly, you cannot export the application from the server you originally developed it on?
Exact.
It does not work on same server when I change the appid
It does not work on my test server when I replace the same application
2. What OS are you on?
In dev : Windows 2K
In test : Linux RedHat
3. Is the workspace name the same from development to production?
No
4. Is the parssing Schema the same from development to production?
No
5. If you run the app as admin do you get the menu at the bottom of the page that displays the Page not found error?
No
I am able to export/import all the other applications without problem.
The only difference is that the one that I cannot import/export is translated.

"Page Not Found" Err after arnd 5 mins of processing on SAP Trans iView

Hello All,
We are facing an issue related to a SAP Transaction iView on our portal.
This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
We have tried the following parameters without success:
icm/server_port_0 = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
icm/keep_alive_timeout (sec.) = 3600
icm/conn_timeout = 5000
rdisp/plugin_auto_logout = 1800
Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
For the current on-going discussion for the same issue, please refer:
["Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView;
Thank you for your time!
Regards,
Gaurav
Edited by: Gaurav Shah on Dec 9, 2008 7:22 PM

Hi Gaurav,
I know this thread is old. but i am getting the similar page cannot be displayed after 600 seconds.
I changed the ICM timeout to 1800 from 600 but it still doesnt seem to work. Were you able to resolve the issue. If yes then please let me know the fix.
Regards
Aditya

"Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView

Hello All,
We are facing an issue related to a SAP Transaction iView on our portal.
This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
We have tried the following parameters without success:
icm/server_port_0     = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
icm/keep_alive_timeout (sec.) = 3600
icm/conn_timeout                = 5000
rdisp/plugin_auto_logout       = 1800
Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
Thank you for your time!
Regards,
Gaurav

Hello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
    Kernel parameter:    rdisp/gui_auto_logout
    Kernel parameter:    rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

'Page Not Found' wifi login issue after ios6 upgrade on iPad2

After upgrading my iPad2 to ios6 and trying to connect to my wifi, my iPad2 tries to login for some reason to the Apple site but all that comes up is a 'Page Not Found' notification. I can browse the Apple site while in this browser but I can only go back, forward or cancel which then disconnects my iPad2 from my wifi.
Is there a solution to this issue? I've already tried clearing my browser history and data and resetting the iPad2 but to no avail

This one works for me...
Reset networks settings: Settings>General>Reset>Reset Network Settings

Page not found error - Session Termination

Hi
We are using SSL termination at web dispatcher (version 720 - patch 85).
The link is like
User < https> WD < http> Consumer Portal <https> WD <http> Producer
Portal <https> WD <http> Backend ABAP system
MSS > team > performance management and when they click on the overall
performance rating we get the "Page not found or not available"
Please note this happens intermittently
Our Dev Consumer portal has two server nodes, when we shutdown one node (say node0) and tested it out with node1 it works fine, then we switched off the server node1 and started server node 0, it works fine.
When both the nodes are up, it fails intermittently. From the session cookie we can find that if the request does a node hopping it fails and it happens intermittently.
Also when we tested the same directly on the producer portal it works fine.
We checked the parameters for both the server nodes, its the same.
Has anyone faced this kind of issues?
Regards
Senthil

Usually in this tortuous route, limited Timeouts Parameters will trigger 404's and some times when you use Web Dispatcher caching but I don't think you have WD Caching.
icm/conn_timeout -
> From ICM to Client, this should be large enough , our Value 10000 (10 seconds)
icm/keep_alive_timeout --> Network timeout 180 ( 3 minute)
icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=600,PROCTIMEOUT=1800 -
> Session timeout.
Can you post your values here.
Thanks
SM

Timeouts/page not found/disconnect on xbox live

Similar Messages

Maybe you are looking for