Timer Job job-application-server-admin-service spiking CPU after every minute

Hi all,
I have an issue in my SP2010 Farm that all the servers spiking CPU to 100% after a minute or so. I have drilled down and found that the following timer jon is the culprit.
Timer Job job-application-server-admin-service. If I change the service running to 2 minutes (default is 1 Min) then the spikes comes after every 2 minutes.
Please suggest what I can do about this?

Was it working fine previously. If yes, what changes happened which caused this issue
1. Check the ULS + Eventviewer logs at the time when this issue happens.
2. Collect perflog files and execute PAL on that this will give you the complete analysis of processes and performance at that time.
Check below:
http://social.technet.microsoft.com/Forums/office/en-US/07207109-0450-47cf-b6ee-467a58eaa887/trust-relationship-between-the-primary-domain-and-trusted-domain-failed?forum=sharepointgenerallegacy
http://webcache.googleusercontent.com/search?q=cache:nJYnqC6ug8cJ:sharepointfraggel.blogspot.com/+&cd=3&hl=en&ct=clnk&gl=in
Fix the problem
Manually clear the file system cache on the local servers (fe's) on which the timer service is running (http://support.microsoft.com/kb/939308)
Stop the SharePoint Timer Service in Administrative Tool/Services.
Go to the cache folder. For Windows Server 2008: Drive:\ProgramData\Microsoft\SharePoint\Config
Find the folder that contains the file Cache.ini
Delete all the XML configuration files in the folder so that you can verify that the folder is replaced by new XML files when the cache is rebuilt.
Open the Cache.ini file, delete all content in the file and type 1, save and exit.
Start the SharePoint Timer service
If this helped you resolve your issue, please mark it Answered

Similar Messages

Application Server Administration Service Timer Job stuck at Initialized 0% . Config Cache clear doesnt Help.MOSS2007

Hi All,
One of my WFE/Query server for MOSS is showing Application Server Administration Service Timer Job stuck at Initialized 0% in CA timer Job status.
In timer Job Status in CA under the SSP Job Control service I find the Application Server Administration Service Timer Job struck at 0%
I have tried Clearing config cache of the Farm . I have tried disconnecting this server from Farm and reconnecting it with Psconfig UI, I have tried running Psconfig.exe on the affected server. But even after doing this service is stuck at 0%
If I exit the OWSTimer.exe from task manager, it shows aborted at 0% . I am using a single SSP and reconfiguring SSP is not an option right now.
Any help regarding it will be greatly appreciated.
Regards,
Rohit

Hello,
Have you changed the password recently? Also try to restart the windows timer service on all server.
You might also want to check these threads:
http://sharepoint.stackexchange.com/questions/44073/why-timer-job-stucks-at-initialized-status
http://social.msdn.microsoft.com/Forums/en-US/d238cc1c-5c41-4762-9878-020cb36679c3/wss-30-workflow-timer-job-status-stuck-at-initialized-0
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7d932581-91a9-41f2-8848-95f8a72ba19b/timer-job-initialized-0?forum=sharepointadminlegacy
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Application Server Admin??

Hi there,
am a software engineer working as an Oracle, Java, and J2EE components developer; currently, am interested to work as an Application Server Admin., and if u can guide me toward my goal; i mean, what are the requirements i got to no to start workin with AS?
what are the responsibilties of an AS Admin(web Admin)?
do u recommend a certain book, tutorial, or internet sites to start studying from ??
Also, do u recommend any resources that may help in passing the AS exam (other then oracle University Materials)??
Appreciating ur cooperation...
Mourad

Hey anwarak, I am having the exact problem again as well. I had this same issue on the previous release of j2ee and for a short time I had it working. I lost that functionality when I lost my disk drive to a (s.m.a.r.t.) type of error. I am now in the rebuilding system phase and thought the issue might be resolved in this release. My initial resolution that was suggested here was to turn off my firewall.
I am running Win-XP SP1 and I also have Norton2002 and ZoneAlarm Pro 4.5.538.001 on my system. I have attempted to allow ZoneAlarm to ease restrictions for cookies and ad blockers, just in case but to no avail! I found the following log at C:\Sun\AppServer\domains\domain1\logs\access on my system:
127.0.0.1 - - [01/Apr/2004:20:49:19 -0600] "GET /asadmin/index.html HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:19 -0600] "GET /asadmin/admingui/TopFrameset HTTP/1.1" 200 533
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/css/css_ns6up.css HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /asadmin/jsp/login.jsp HTTP/1.1" 200 6862
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/other/dot.gif HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/login/login_background.jpg HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /asadmin/images/productname.gif HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/login/login_sun_logo.gif HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:30 -0600] "POST /asadmin/jsp/j_security_check HTTP/1.1" 400 1099
The post line is the most curious one of all! I am not sure what the result codes are, or where to find a definition of them. I am still digging for that.
I am also looking for the answer!

How to configure oracle 6i report server run time component with application server

we got oracle 6i report server for developing the web based reports for our undergoing product. we r succesed in developing the web based reports using oracle 6i report server.But we r facing problems while deploying the product with oracle reports at clients place,why because the client does not have the oracle 6i report server. To solve this problem we have to configure the oracle 6i report server run time component with application server at client side , but we are unable to configure this component(that is CGI handler).

You can run multiple instances of Reports Server in 6i.
In tnsnames.ora, for each server, have a different name and each listening to different port.
For example,
server1.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1949))
server2.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1950))
Also, if you want to know about Reports Server Clustering, you may refer to "Publishing Reports" document on OTN:
http://otn.oracle.com/docs/products/reports/pdf/A73173_01.pdf

Help with connection pool at system application server admin console 9.0

Hi,
I am trying to create a pool of oracle connections in system application server admin console, but when I ping to the server, it shows me the error: invalid oracle URL: OracleDataSource.makeURL.
I have the jar file of the driver referenced in the classpath suffix field of the path settings.
I have added all kind of combinations of additional properties, like
serverName: 172.16.9.162
databaseName: oradex07
portNumber: 1521
username: usr
password: pwd
or
url: jdbc:oracle:thin:@172.16.9.162:1521:oradex07
but it still showing me the same error

Hey, I use this code to lookup session bean deployed in glassfish.
Based on the glassfish EJB FAQ.
Properties props = new Properties();
props.setProperty("java.naming.factory.initial", "com.sun.enterprise.naming.SerialInitContextFactory");
props.setProperty("java.naming.factory.url.pkgs", "com.sun.enterprise.naming");
props.setProperty("java.naming.factory.state", "com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl");
props.setProperty("org.omg.CORBA.ORBInitialHost", "localhost");
props.setProperty("org.omg.CORBA.ORBInitialPort", "3700");
InitialContext initialContext = new InitialContext(props);
SessionBean bean = initialContext.lookup(ejbName);Cheers.

Difference of Oracle Application Server Web Services and JDeveloper

As new to the Webservices my Question is what is difference of:
- 1. Web Services Assistents in JDeveloper 1.3 (JAXRPC specification, WS-Sec)
- 2. "Oracle Application Server Web Services" 10.1.2 using WebServicesAssembler (depreciated ?)
- 3. Apache Soap Server 2 based (deprecated ?)
When should I use the iAS Assistent and when the JDeveloper one for generation?
Why don't they use the same stuff?
Does anyone have some experience for projects on this?
Thx, Willi
Have not found any Topic with an explanation on this. If you know someone please point me to that.
oOracle Web Services Framework Confusion
oracle web services framework confusion
Web service Assembler Tool

Thanks a lot for clearing this things to me.
I have to start a web services projects and I am confused which tools to use - JDeveloper Assistents or the WebServicesAssembler (as pointed out before).
Because I did not find some hints on this (expecpt your ones), it seems to me that I am missing some point or criteria on that I can do such a decision when to use what of those two tools.
Do I understand you right, that in future JDeveloper and the WebServicesAssembler will use the same .jar files and also generate the same code?
Thanks a lot for such valuable hints, Willi

1Z0-312 - Oracle Application Server Admin II - Reference material.

Hi All ,
Please provide me references for the Oracle Application Server Admin II 1Z0-312. If any of you have cleard this examination, Please contact me
Thanks and Regards
Sukesha.

http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=46777&lang=US&p_exam_id=1Z0_312#3
Please contact meHow? The forums attempt to protect you by hiding your email address. (Or did you want your email address to be posted publically? If yes, remember that spammers are looking for valid email IDs on the internet. <g>)
Edited by: Hans Forbrich on Mar 22, 2009 8:18 PM

ColdFusion 9 Application Server windows service not being created

I've done multiple installs of CF9, both 32 and 64-bit versions, on Windows 2003 servers and the ColdFusion 9 Application Server windows service isn't being displayed in the Services console. If I go into the registry under HKLM\System\CCS\Services - I see the key for CF9 App Server was created, but "Description" is the only subkey value that was created. The .Net Service, ODBC Server, Search Server, Solr Service windows services are being fully created properly.
Can anyone shed some light on why the Application Server service isn't getting registered properly and any possible fixes?
TIA

fargo75 wrote: Can anyone shed some light on why the Application Server service isn't getting registered properly and any possible fixes?
TIA
Did you check out the ColdFusion Installation Log for any relevant failures?
Any possible firewall or security settings not allowing the ColdFusion installer creating what it needs to create?

Application Server Admin Console Login

I like to know the default username and password of the Application Server Admin Console. (Server Navigator>Show Admin Console).
At the end of the installation of JSC this login details are displayed but now I have forgotten. Please anyone help me.
Thank you very much.

Try "admin" and "adminadmin".

Is server or service reboot required after editing registry in 13568 event

Is server or service reboot required after editing registry in 13568 event .

Hi Below is the event log guiding me to edit registry in order to resolve replication issue, In this case i cant restart the server or even service.I just want to know will this registry edit take effect with out reboot server or service.
Event Type: Error
Event Source: NtFrs
Event Category: None
Event ID: 13568
Description:
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
Replica set name is    : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
Replica root path is   : "c:\windows\sysvol\domain"
Replica root volume is : "\\.\C:"
A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons.
[1] Volume "\\.\C:" has been formatted.
[2] The NTFS USN journal on volume "\\.\C:" has been deleted.
[3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
[4] File Replication Service was not running on this computer for a long time.
[5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state.
[1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication Service.
[2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
   "System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
   "Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

External commands fail in Background Jobs on Application server

Hi,
We are having problems with jobs that include External Commands. The jobs run successfully if on the Central Instance. But if they run on either of the two Application Server's it fails with 'Unable to connect to Target Host' error message.
I can run the External Commands from SM49 on both AS's. But as soon as its run in background it fails.
I have read the rfcexec.sec file needs to be in the .\work directory on the application so I have this in place.
This is what gets written to dev_w0 when the failure occurs :
M *****************************************************************************
M *
                                                                                M * LOCATION    SAP-Gateway on host <APP_SERVER> / sapgw75
M * ERROR       timeout during allocate
M *
                                                                                M * TIME        Fri May 30 11:20:34 2008
M * RELEASE     640
M * COMPONENT   SAP-Gateway
M * VERSION     2
M * RC          242
M * MODULE      gwr3cpic.c
M * LINE        1795
M * DETAIL      no connect of TP sapxpg from host <CENTRAL_INSTANCE.domain>
M *              after 22 sec
M * COUNTER     483
M *
                                                                                M *****************************************************************************
M
                                                                                A RFC 1446 CONVID 48742194
A   * CMRC=27 DATA=0 STATUS=0 SAPRC=242 ThSAPECMINIT
A RFC> ABAP Programm: SAPLCRFC (Transaction: )
A RFC> User: <USERNAME> (Client: 300)
A RFC> Destination: %_TCPIP_%1 (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 48741194, {C4A35AF0-2F4C-4E36-98C3-9999A6FE99D7})
A RFC SERVER> Caller host: iblonc4306_P75_75
A RFC SERVER> Caller transaction code: (Caller Program: RSBTCXPG)
A RFC SERVER> Called function module: SXPG_STEP_COMMAND_START
I'd really appreciate any suggestions on how to fix this issue??
Thanks,
Kye

Hi Siddhesh,
Thank you for your prompt response. I'm confident all of the prerequisites are set correctly.
I have enabled the trace on SAPXPG but its only writing to the log dev_cp and dev_xpg when the command is executed successfully.
For example, if I use SM49 to run the External command from one of the Application Servers dev_cp & dev_xpg are updated and the command completes successfully. However if I run the job (that has the external command as a single step) from SM37 it fails and doesn't log anything to dev_cp or dev_xpg??
Is this normally how the trace would work?
Thanks again,
Kye

IChat server admin Service Running, status not available

X-Serve running 10.6.8
I noticed the other day thaat when I look at the iChat service in Server Admin, I observed the following:
iChat service is: Running
Start Time: Not Available
Domain: Not Available
Client Connections: Not Available
The log screen says No Log Files exist
I have seen similar screens when there was a slight lag in server admin gathering information to display on screen. This stays this way indefinately. The service is working as far as I can tell, IE people can log in, add each other, and chat. A log file is in fact being used and updated (/var/jabberd/message_archive/)
I noticed this because I was trying to autobuddy.sh, I script I use often to update when I add new users to the organization so they show up in everyones group list. I attempted to stop the service from the command line using:
#:serveradmin stop jabber
#:jabber: state = RUNNING
and was never able to stop iChat. The system behaves the same after a reboot. I am not sure what to do, or what the actual problem is. The only thing besides a reboot that I tried was a permission repair from within the OS.
In the log below I removed some user specific information because they are user names for users on my network. This server and service is internal only.
the console logs I have this:
Nov 30 10:29:55 aphrodite jabberd/router[353]: message_log received a message with empty body
Nov 30 10:30:15: --- last message repeated 2 times ---
Nov 30 10:30:19 aphrodite jabberd/router[353]: message_log received a message with empty body
Nov 30 10:31:05 aphrodite jabberd/router[353]: message_log received a message with empty body
Nov 30 10:49:17 aphrodite com.mycompany.autobuddy[83710]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 11:12:34 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: mbr_check_service_membership returned 2
Nov 30 11:12:34 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: no access restrictions found
Nov 30 11:19:17 aphrodite com.mycompany.autobuddy[87010]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 11:49:17 aphrodite com.mycompany.autobuddy[90323]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 11:54:37 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: checking user "jimrumrillcotaoilcom" access for service "chat"
Nov 30 11:54:37 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: mbr_check_service_membership returned 2
Nov 30 11:54:37 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: no access restrictions found
Nov 30 12:03:14 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: mbr_check_service_membership returned 2
Nov 30 12:03:14 aphrodite jabberd/c2s[354]: od_auth_check_service_membership: no access restrictions found
Nov 30 12:03:32 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:04:26: --- last message repeated 2 times ---
Nov 30 12:05:25 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:06:26: --- last message repeated 1 time ---
Nov 30 12:06:26 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:06:57: --- last message repeated 1 time ---
Nov 30 12:07:27 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:08:28: --- last message repeated 1 time ---
Nov 30 12:08:28 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:09:26: --- last message repeated 1 time ---
Nov 30 12:09:29 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:09:59: --- last message repeated 1 time ---
Nov 30 12:10:30 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:11:30: --- last message repeated 1 time ---
Nov 30 12:11:30 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:12:00: --- last message repeated 1 time ---
Nov 30 12:12:31 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:13:32: --- last message repeated 1 time ---
Nov 30 12:13:32 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:14:26: --- last message repeated 1 time ---
Nov 30 12:14:33 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:15:34: --- last message repeated 1 time ---
Nov 30 12:15:34 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:16:35: --- last message repeated 1 time ---
Nov 30 12:16:35 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:17:05: --- last message repeated 1 time ---
Nov 30 12:17:36 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:18:37: --- last message repeated 1 time ---
Nov 30 12:18:37 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:19:17: --- last message repeated 1 time ---
Nov 30 12:19:17 aphrodite com.mycompany.autobuddy[94140]: /usr/local/Scripts/auto_buddy.sh: line 2: /usr/sbin/jabber_autobuddy: No such file or directory
Nov 30 12:19:38 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:19:53: --- last message repeated 1 time ---
Nov 30 12:20:39 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:20:45: --- last message repeated 1 time ---
Nov 30 12:21:40 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:22:10: --- last message repeated 1 time ---
Nov 30 12:22:41 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:22:47: --- last message repeated 1 time ---
Nov 30 12:23:42 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:24:26: --- last message repeated 1 time ---
Nov 30 12:24:43 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:25:10: --- last message repeated 1 time ---
Nov 30 12:25:44 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:26:45: --- last message repeated 1 time ---
Nov 30 12:26:45 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:27:16: --- last message repeated 1 time ---
Nov 30 12:28:24 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Nov 30 12:29:00: --- last message repeated 3 times ---
Nov 30 12:29:00 aphrodite servermgrd[84]: servermgr_jabber[W]: detailed service status not available until network configuration completed
Any help on what might be going on or a push in a direction would be greatly appreciated.
Thanks!

Well I searched the forums here and I found some similar issues, however the fix's I was directed too did not resolve the problem.
I did notice this today after reading a post regarding the use of the .local domain name, and fixing that fixes this issue:
When i selected my server on the left hand side of server admin, click on settings at the top (the gear) then on Network, I see:
Ethernet 1 (eth0) IPv4 192.1.1.4 Aphrodite.local
I am not sure where the .local is coming from. This is an internal server and has been configured with a FQDN for 2 years now, aphrodite.cotaoil.net. On the server, the only other place I see the .local, is in system preferences, sharing, at the top it has my fqdn, but when I click on edit, it has a local host field that says Aphrodite, with a .local greyed out after, or ghosted.
When I use the command changeip -checkhostname I recieve:
changeip -checkhostname
Primary address = 192.1.1.4
Current HostName = aphrodite.cotaoil.net
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success = "success"
the hostname not available message is new (well I know at some point in the not too distant past I did not have this message) so I am not sure if an update broke this or not but basically I am not sure where to go from here.
The DNS settings are set the same as they were when I originally set up the server. Reviewing DNS logs, I do not see anything abnormal.
additionally when I run scutil i get:
aphrodite:~ root# scutil --get LocalHostName
Aphrodite
aphrodite:~ root# scutil --get ComputerName
Aphrodite.cotaoil.net
I am a little stumped as to where to go from here. I believe based on some other posts Ive read that this may have something to do with why I cannot see any iChat status and am recieving the dreaded "detailed service status not available until network configuration completed"
Thanks for any and all thoughts. Currently reviewing Hoffs tutorials, but I used combined Hoff tutorials and apple server guides when originally set up the server. Please let me know what I did wrong (besides my internal IP range)

Application Server - Admin Console Login Problem

Hi,
I have installed J2EE 1.4 (Sun Java Application Server Platform Edition 8) on Windows 2000.
Installation was successful and the app server is getting started too.
When i am going to http://localhost:4848/asadmin (Admin Console) and enter user/password to login ..
It complains:
HTTP Status 400 - Invalid direct reference to form login page
type Status report
message Invalid direct reference to form login page
description The request sent by the client was syntactically incorrect (Invalid direct reference to form login page).
I could not find much on this in the troubleshooting guide or other documents too.
Did anyone else face this issue and if you know the reason/workaround, Pls suggest.
Thanks in Advance.
Anwar

Hey anwarak, I am having the exact problem again as well. I had this same issue on the previous release of j2ee and for a short time I had it working. I lost that functionality when I lost my disk drive to a (s.m.a.r.t.) type of error. I am now in the rebuilding system phase and thought the issue might be resolved in this release. My initial resolution that was suggested here was to turn off my firewall.
I am running Win-XP SP1 and I also have Norton2002 and ZoneAlarm Pro 4.5.538.001 on my system. I have attempted to allow ZoneAlarm to ease restrictions for cookies and ad blockers, just in case but to no avail! I found the following log at C:\Sun\AppServer\domains\domain1\logs\access on my system:
127.0.0.1 - - [01/Apr/2004:20:49:19 -0600] "GET /asadmin/index.html HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:19 -0600] "GET /asadmin/admingui/TopFrameset HTTP/1.1" 200 533
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/css/css_ns6up.css HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /asadmin/jsp/login.jsp HTTP/1.1" 200 6862
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/other/dot.gif HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/login/login_background.jpg HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /asadmin/images/productname.gif HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:20 -0600] "GET /com_sun_web_ui/images/login/login_sun_logo.gif HTTP/1.1" 304 -
127.0.0.1 - - [01/Apr/2004:20:49:30 -0600] "POST /asadmin/jsp/j_security_check HTTP/1.1" 400 1099
The post line is the most curious one of all! I am not sure what the result codes are, or where to find a definition of them. I am still digging for that.
I am also looking for the answer!

Session time out in Application server -reg

hi friends
We have Oracle Application server 10g in cluster mode in our organization. We are using Oracle Forms and Reports . But there is one issue. If the user keeps the screen idle for more than 20 min the system gets timed out and requires sdba authentication . We actually increased the time out value. But we could not able to remove sdba authentication. Our aim is to remove authentication after session time out. It is ok even if the application completely closes and comes out of the screen. But the user must not be asked to enter sdba credentials after system is idle for the time out period.
M.C.Jayanarayan

Hi,
you posted this question to the JDeveloper forum, where it may be better posted to the application server forum or the Forms forum
Frank

"System cannot connect to the application server" (Admin Client only)

Hello Experts,
I have a strange issue: I am getting "system cannot connect to the application server" when I am trying to launch BPC Admin.
I successfully connect to the same application server with Excel client on the same PC.
I am able to connect via Admin from another PC.
The installation in question is a new installation. The only difference between my PC and a troubled one is IE7 vs. IE8 - IE8 is the one giving issues.
BPC site is in Local Intranet zone. Windows Authentication is enabled. What am I missing? Local Policy? IE8 settings? Folder permissions (I'm local admin on both PCs)?
It's BPC 7.5 SP05.
Thanks in advance,
Akim
P.S. OS: Windows Server 2003 SP2 32-bit (Citrix box).
Edited by: Akim Zubarchuk on Mar 30, 2011 12:28 AM

Hi Akim,
Check client diagnostic for admin client can provide good information.
Any way if you are able to connect with excel client not with admin client I will say:
1. Check the rights of user used to connect with admin console
2. Check proxy settings
3. Disable antivorus or firewall into that computer.
4. Make sure the installation of admin client was correct done.
In my opinion it is a big probability to be point 3 or 4.
Regards
Sorin Radulescu

Timer Job job-application-server-admin-service spiking CPU after every minute

Similar Messages

Maybe you are looking for