Timer option changed to 'Stop Playing' from 'Sleep iphone'. Any idea on how to get the Sleep ipone.
In the iPhone 4S under the Timer, for the Option, When 'Timer Ends' it used to be a 'Sleep iphone'. After the iOS 5.1 update, I think, it is now changed to 'Stop Playing', which only stops the Music. Any idea how to - put the phone to Sleep mode.
Thanks again Norman.
I desperately set about checking the option you provided, but good to know that you have noticed the same thing.
Yes we might need to wait for the update from Apple, but I am not sure how will this be noticed and acted upon.
The sleep option was very good to have, because it took care of the other apps for streaming music etc, and would stop all of them. Would you suggest anyway of raising it to the Support people?
Similar Messages
-
I-photo: I used 2 cameras to take pictures on a trip --- i have put the pictures from both cameras into an album --- when i click on view and then sort by date, the pictures do not sort by date --- any ideas on how to get the pics sorted by date?
Select all the photos that you need to change, then click the "Photos" menu and choose "Adjust Date and Time".
If you add a year, it will adjust all the photos that you selected by adding a year (so if you accidentally select one of the photos that already has "2012", that will change to "2013"). -
My iPod touch camera just stopped working its brand new any ideas on how to get it going again?
Anyone ever has there camera just stop working in mid use? Can't get it going again any ideas?
Try the standard fixes:
- Reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Restore from backup
- Restore to factory deaults./new iPOd
also see:
Camera shutter issue: Apple Support Communities
An appointment a the Genius Bar of an Apple store may be in order -
Does anyone have any idea why one week I could lose my playlist then this week lose most of my music from ITunes? How can I get it back without having to download it again
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Hope this helps,
JD -
Downloaded from "clean" cd from store but some songs only play partway even though total time shows.
Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks only from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
If you don't see them straight away it may help to restart iTunes. While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2 -
The audio on the site is in MP3 format. The site is coded in PHP.
I'm not sure if the current Firefox release is supporting MP3 in an audio or video tag if that is what is used to play this media file.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=851290 bug 851290] - Use GStreamer on Mac for H.264/MP3/AAC playback (instead of AV Foundation)
<i>Please do not comment in bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html</i> -
Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!
This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly. -
Got my new itouch and after some minor issue syncing, i was able to get everything set up. However I just noticed that soem of the album artwork is not matched up to the song that is currently playing. I also sometimes, after syncing, I get a message stating "iTunes unable to load data class information from Sync Services. Reconnect or try again later." Any ideas on hwo to get the artwork realigned to the correct songs?
Try this, it has worked for me.
1. Make a new, empty iTune library by launching iTunes while holding down the Option key.
2. Choose create new library; do NOT have iTunes scan for music.
3. Enable iTunes Match on the empty library.
4. Find the tracks with the wrong artwork, highlight them, Get Info and paste the correct artwork into the "artwork" field.
5. When finished update iTunes Match, then re-launch iTunes while holding down the Option key and chose select library to get back to the "master" library. -
i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?
On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed. -
When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, WI'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster. -
I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!
The pdf is loading as html code. If you save it, it will download as :
605124.pdf.html
Change the extension to .pdf
And it opens and works perfectly, I just tested it:
Use this link to download it automatically:
http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4 -
Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device? -
Okay i had to install Itunes onto my new OS because window's Vista messed up on me and i can't get any of my old purchases back from my account such as music and movies any ideas on how to get them back (i do not have the folder that contains old items from the last itunes or anything from that OS because it had a virus and i just wanted windows 7)
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Hope this helps,
JD -
one of my kids changed my password, and now i can't access my mail accounts. Any ideas on how to override the password and set up a new one?
A mail account password or you login password?
Which OS by the way?
Maybe you are looking for
-
Hi I was working on an info package routine. I have to load somw documents based some some criterias. My question is how may values can i append for loading Document No. i have somwhere about 400,000 records. I'll have all those doc no's in an Intern
-
My iPad keeps restarting itself.
I turn my iPad 3 on, it shows me the apple logo and then starts to restart itself and does that over and over again. It never ends.
-
Can you change what phone number is passed over Caller ID?
Here is my scenario. I do not want to have two separate phones. My android phone has a MN phone number that I need to keep. My new job requires that I have a CA phone number. I can hard forward the CA phone number to my MN phone....but....when I'm ma
-
AE Not Rendering when minimized
So i usually need to have AE render projects overnight but lately there has been this thing where my computer keeps asking me to UPDATE something and it just keeps popping up and whenever i write my admin password and click yes it just appears anothe
-
I created a company code by copying existing company code. How can I delete the copied company code?