Timer problem

Hi there,
I have a strange thing with some timers.
I have a main timer: This one is running during a specific time: Set time. When he reaches the Set time is stops. This is ok
This timer activates 2 other timers: 1 - Run timer
2 - Stop timer
The first timer which has to start is: Run timer
After the run time is expired the Stop timer should be running
and on and on
After The main time is expired all the sequences are stopped. This is ok
See sample code
William Strijks
Running with Labview 6.1
Fieldpoint hardware
Attachments:
timersample.llb ‏192 KB

Hi William,
If you change the case value in the main -loop according picture the counter runs. Does this help ?
Attachments:
change.jpg ‏225 KB

Similar Messages

Hi , any body can send real time problems they faced

hi every body this is siva from banglore, any body can send the real time problems they faced in sap crm and how they solved if any body kindly send to my id : [email protected]

hi Siva,
All the issues in the forums are the real time issues
YOu can just go through them .
Also why do you need real time issues.
If you have any issues post it here and some one can help you

Message sent time problem

i have message sent time problem on my N73
the time is not correct in my message detail whenever i try to check it,note that it is message SENT time not RECEIVE time.however,other phones operate correctly even other brands of nokia like 1110.
please help me how can i get the correct time ?
moreover i iam in iran and set my time for iran

It's a bug that every N73 owners have.
Don't know why they didn't fix this until now, perhaps the didn't noticed this bug yet.
Feel free to hit the KUDOS button if you think I deserved it.........

X301 post BIOS / Model Number update System Time problems

Dear community,
I recently updated my BIOS using the thinkvantage flash BIOS utility for no reason other than it appeared on the update utility. I also updated the model number, once again for no real reason other than update pleasure. Now, everything works perfectly fine on the system, and I have no problems EXCEPT:
I use New York Times Adobe Air product called "Times Reader". Since the update, when I try to log into the Times Reader I get an error that states "Authentication Error. Check that your system time is set correctly." In the pre-boot set up screen the time seems to be set right, and in the windows utility the time is set correctly. So my questions is,
after a BIOS flash / Model # update, does the system time function need some re-boot / update?
Thanks!

Well I still dunno what the problem was. It seemed as if the system would have to be running for a day or two before it would start to speed up, as if it was actually gaining a few milliseconds cumulatively every second...
Anyway, through other testing (OC & such) I flashed to 1.5B5 and it is running pretty good, and seems to have fixed the time problem.
On a side note, 1.5B5 is the first BIOS that actually makes Cool 'N Quiet work (to underclock to 1GHz at idle & dynamically OC when needed).
If anyone has experienced this time issue, please post findings! For now, it's fixed for me, so I'm not going to worry about it

Window 2008 R2 datacentre server time problem

Hi Team,
I have one window 2008 R2 data centre server, which having time problem, I have setted IST time zone but time coming 15 minute delay, I have tried to correct time by manual but time goes again 15 minute delay itself.
Please guide how to solve it and but i don't want to use NTP, as this server is on workgroup.
Regards
Inder Singh Rawat

Hi ,
I followed following step to build NTP in window server 2008 R2.
Enabling & Configuring NTP Server
1. Change the server type to NTP.
Click Start, click Run, type regedit, and then click OK.
Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Parameters\Type
In the pane on the right, right-click Type, and then click Modify. In Edit Value, type NTP in the Value data box, and then click OK.
2. Set AnnounceFlags to 5.
Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\AnnounceFlags
In the pane on the right, right-click AnnounceFlags, and then click Modify. In Edit DWORD Value, type 5 in the Value data box, and then click OK.
3. Enable NTPServer.
Locate and then click the following registry subkey:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer
In the pane on the right, right-click Enabled, and then click Modify .In Edit DWORD Value, type 1 in
the Value data box, and then click OK
4. Specify the time sources.
Open a command prompt and type the command as below: w32tm /config /manualpeerlist:peers /syncfromflags:manual /reliable:yes /update
peers: time.windows.com or time.nist.gov
eg: w32tm /config /manualpeerlist:time.windows.com /syncfromflags:manual /reliable:yes /update
5. At the command prompt, type the following command to restart the Windows Time service, and then press Enter:
net stop w32time
net start w32time
i run following useful command.
1. To resynchronize time : w32tm /resync or w32tm /resync /rediscover
2. To verify the configuartion : w32tm /query /configuration and w32tm /query /status
3. Display the current time zone settings : w32tm /tz
Now what problem i am facing , when server goes restart "Window time service stoped" and ntp corrupted.
Even Window time service is set automatically, when i do configure again then NTP work proper.
Please help how to resolve this problem, if server restart NTP goes corrupted becuase of window time service stopped.
Regards
Inder Singh Rawat

TS3899 I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

I can receive, but not send emails on iPad. All settings checked several times and with internet provider. imap settings confirmed as ok. Account deleted and set up under guidance of service provider several times - problem not solved - help!!

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Occasional time problems?

i have my iphone set to automatically set the date and time. a few times since i've had it, the time is ahead one full hour...it seems to happen when the phone is shut down then turn back on, but i think one time it had the wrong time after being left on standby. any thoughts? is this an AT&T issue? i can't think of anything that could be wrong with the phone (or phone setting) which could contribute to this, since i'm chosing the automatic option for setting the time. small issue i know...just curious.

I have had a weird time problem also. The other night my husband was snoring and I couldn't get to sleep so I decided to get up and go into one of the other bedrooms. There is no alarm there, so I opted to use the alarm function on my iPhone to give me a wake up call. I set the alarm for 5am and sure enough, at 5am the alarm went off as expected. I went to the kitchen to make a pot of coffee and noticed the clock on the coffee maker said 5:11am. I looked at my iPhone and it said 5:01am. I then looked at my atomic clock and also the one on the cable box, both of which should be correct, and they both agreed with the coffee maker - now 5:12 while the iPhone said 5:02. I have the iPhone set to automatically update the time. Being in a rush to get ready for work, I did nothing about setting the time on the iPhone and decided I would reset it later. When I got to work, I remembered the time was off on the iPhone and decided to reset it, but when I looked it was now synced back to the correct time! I don't know if this was an iPhone, ATT issue or what, but I won't be depending soley on the iPhone alarm to get me up on time again. I haven't used the iPhone alarm since then so don't know if it is reproducable. Anyone else run across this problem?

Null Date and Time Problem

I created my entity classes from a database by using netbeans 6.0 and I'm using H2 as a database. I've the following table in my database.
CREATE CACHED TABLE OPEN_TABLE ( ID INTEGER GENERATED BY DEFAULT AS IDENTITY(START WITH 0) NOT NULL PRIMARY KEY, TABLE_ID INTEGER, WAITER_ID INTEGER, OPEN_HOUR TIME DEFAULT CURRENT_TIME, OPEN_DATE DATE DEFAULT CURRENT_DATE );
and here is the entity class netbeans created for me.
import java.io.Serializable; import java.util.Date; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.Id; import javax.persistence.NamedQueries; import javax.persistence.NamedQuery; import javax.persistence.Table; import javax.persistence.Temporal; import javax.persistence.TemporalType; /** * * @author Yupp */ @Entity @Table(name = "OPEN_TABLE") @NamedQueries({@NamedQuery(name = "OpenTable.findById", query = "SELECT o FROM OpenTable o WHERE o.id = :id"), @NamedQuery(name = "OpenTable.findByTableId", query = "SELECT o FROM OpenTable o WHERE o.tableId = :tableId"), @NamedQuery(name = "OpenTable.findByWaiterId", query = "SELECT o FROM OpenTable o WHERE o.waiterId = :waiterId"), @NamedQuery(name = "OpenTable.findByOpenHour", query = "SELECT o FROM OpenTable o WHERE o.openHour = :openHour"), @NamedQuery(name = "OpenTable.findByOpenDate", query = "SELECT o FROM OpenTable o WHERE o.openDate = :openDate")}) public class OpenTable implements Serializable { private static final long serialVersionUID = 1L; @Id @Column(name = "ID", nullable = false) private Integer id; @Column(name = "TABLE_ID") private Integer tableId; @Column(name = "WAITER_ID") private Integer waiterId; @Column(name = "OPEN_HOUR") @Temporal(TemporalType.TIME) private Date openHour; @Column(name = "OPEN_DATE") @Temporal(TemporalType.DATE) private Date openDate; public OpenTable() { } public OpenTable(Integer id) { this.id = id; } public OpenTable(Integer id, Date openHour, Date openDate) { this.id = id; this.openHour = openHour; this.openDate = openDate; } public Integer getId() { return id; } public void setId(Integer id) { this.id = id; } public Integer getTableId() { return tableId; } public void setTableId(Integer tableId) { this.tableId = tableId; } public Integer getWaiterId() { return waiterId; } public void setWaiterId(Integer waiterId) { this.waiterId = waiterId; } public Date getOpenHour() { return openHour; } public void setOpenHour(Date openHour) { this.openHour = openHour; } public Date getOpenDate() { return openDate; } public void setOpenDate(Date openDate) { this.openDate = openDate; } @Override public int hashCode() { int hash = 0; hash += (id != null ? id.hashCode() : 0); return hash; } @Override public boolean equals(Object object) { // TODO: Warning - this method won't work in the case the id fields are not set if (!(object instanceof OpenTable)) { return false; } OpenTable other = (OpenTable) object; if ((this.id == null && other.id != null) || (this.id != null && !this.id.equals(other.id))) { return false; } return true; } @Override public String toString() { return "OpenTable[id=" + id + "]"; } }
The problem is when I try to insert a new OpenTable to the database, Open_Date and Open_Hour columns stay as null. I want them to get the automatic CURRENT_DATE and CURRENT_TIME values. I can't see where the problem is because I used CURRENT_DATE and CURRENT_TIME words when I created the table. I don't have any problems when I use standart SQL statements to insert a new row. I just use INSERT INTO OPEN_TABLE(TABLE_ID, WAITER_ID) VALUES(2,3) and get current date and hour values automatically but JPA doesn't do that for me. What should I do to solve the problem?

Those database defaults are only applied when you use an INSERT statement that specifies a list of columns excluding the ones with defaults. Presumably your persistence code always sets all columns when it does an INSERT, so the defaults won't apply. You'll have to find the way to set the defaults in the persistence layer, not in the database.

Date/Time Problem Results In Spinning Wheel

My mom's eMac recently was shutdown during a power outage, and came back with the date/time reset problem (I'm familiar with this when my battery comes loose on my iBook).
Only problem is, if I try to launch System Preference or Open Date & Time I get the spinning wheel that doesn't allow me to reset the date/time. On top of that, I can't seem to get anything to launch right now b/c it seems Finder is what's getting the spinning wheel. The only thing that launches is AIM (which is on autolaunch), but it can't be accessed at all from the computer (though it does show up as signed on when I'm signed on to AIM at work).
I've tried a force quit to relaunch finder with no results, and have also blasted the PRAM and tried the instructions for resetting the PMU (if I'm doing that right).
One thing I can across is the possibility I need to replace the internal backup battery. Could that be the problem, or have I run into soemthing much more serious.
Any help would be appreciated.

Hello! A power outage often damages the disk's directory information. Boot from the install disc ("c" key down at startup with disc inserted) and right after the language screen navigate through the drop down menus to the disk utility and repair the disc. Run the repair multiple times if it reports errors until it doesn't report errors. Tom

One more time - problems with fans

I realize this is but one of hundreds or possibly thousands of cases of Mac users being plagued by fan noise problems, but to me it has been a long and extremely frustrating saga. I have been a Mac user since the very beginning, through different versions of Macs and iMacs, and this is the first time I ever refer to a Macintosh as a "piece of junk."
I bought my iMac G5 in August 2005, a 20-inch ALS with 250 GB hard drive and 512 MB RAM. It worked perfectly until January this year, when all of sudden it shut down by itself. Freaked me out completely. Turned out to be power supply problem (EMC 2056) which Apple never informed me about.
I brought it to a repair shop that fixed the intermittent shut-down problem. I also added 1GB memory. But then the fans started to go berserk. Before the power supply problem, I only heard the fans whenever I used a large program like Photoshop. For the most part, it was a very quiet machine. After the power supply was replaced, within minutes of turning the iMac on, I could hear the fans spinning faster and faster, stabilizing at around 4400 rpm and did not stop spinning until I put the iMac to sleep or turned it off, regardless of CPU usage or software being used.
I checked the discussions at this forum (over 500 posts, no real answer) and did every "voodoo trick" suggested: I reset the SMU dozens of time, cleaned the inside of the iMac and around the fan area, did apple hardware test (everything was fine), monitored temperature and activity with XRG (average CPU at 160F, hard drive at 113F), cleaned out caches, tested for corrupt preferences, re-installed the original OS 10.4 (which only made the fans louder), upgraded it back to OS 10.4.9. I also removed the additional 1 GB memory, thinking it might be a bad piece. It didn't help.
Finally, I requested fan replacement from Apple and got them. I installed them last Sunday and now the problem is even worse! Within SECONDS of turning it on, the CPU T- Dio soars to around 170F, even while the machine is still stone cold to the touch. The hard drive temperature now averages at 117F, CPU fan is never below 4000 rpm (4400 rpm 98% of the time), even at 5-8% CPU usage.
The fans themselves are much quieter because they're brand new. But you can still hear the hums and whirs and it drives me nuts. More seriously, my iMac is now narcoleptic. If I use it too long (a few hours on a stretch) it will put itself to sleep, apparently because it thinks it is overheated. And when I use Photoshop or Illustrator, the awake time is even shorter. Depending on the outside temperature, at the most I can only use them for about an hour at a time. Two days ago we had heat wave, and even with the air conditioner running full blast in my study, the iMac kept falling asleep within minutes of using Illustrator.
Right now I am using TextEdit and no other program is running. Uptime is 59 minutes, average CPU 9.6%. CPU T-Dio is at 168.8F, hard drive 117.5F, CPU fan at 4400 rpm. I am out of ideas and before I do something drastic to this machine, if anyone knows what's going on with my iMac (I know every case is different), please help!
iMacG5 ECM 2056 Mac OS X (10.4.9) 20"/2.0GHz Power PC/1.5GB DDR SDRAM/250GB
iMacG5 ECM 2056 Mac OS X (10.4.9) 20"/2.0GHz Power PC/1.5GB DDR SDRAM/250GB

I do not have the solution... but the same problem with a nice iMac G5 purchased in July 2005.
My Mac operated very silently untill 6 month ago;problem MAY ( I am not sure) have started when I upgraded to 10.4.10 ; even with few applications and low CPU usage (80% or more inactive), it seems that I have the following regrettable chain of events;
==> the CPU temperature is quite high ( 60°c to 72°c most of the time, ie 140-160 °F)
==> resulting in fan turning at high speed ( 2.000 for CPU and system, 2500 for HD), and changing speed all the time
==> resulting in a noisy computer
I am SURE this was not the case 6 month ago, and I suspect it is linked to my upgrade to 10.4.10.
I did all sorts of reinstall, authorization repair, SMU reset, fan clean-up with no sucess.
iMac G5 (2005) Mac OS X (10.4.10) POwerbook G4 Titanium (2001)

Creating timer problem in oracle forms

Hello,
        I am using oracle weblogic 10.3.5 with oracle forms 11g at windows 7.I am trying to make a trigger but getting frm 40738 argument 1 to builtin GET_APPLICATION_PROPERTY cant be null error. I am using code at when-new-form-Instance trigger:
declare
    timer_id TIMER;
    one_second number:=1000;
    st varchar2(100);
begin
    timer_id :=find_timer('CLOCK_TIMER');
    If not id_null(timer_id) then
        delete_timer('timer_id');
    else
        timer_id := CREATE_TIMER('CLOCK_TIMER',one_second,REPEAT);
        --timer_id:=create_timer('CLOCK_TIMER',one_second,repeat);
        st:=Get_application_property(TIMER_NAME);
        message(st);
        end if;
        select to_char(sysdate,'HH24:MI:SS') into :EVENTS.CURRENT_TIME from dual;
        exception when others then
        message(TO_CHAR(SQLCODE)||''||SQLERRM);
    end;
and at When-Timer-Expired trigger:
declare
    timer_name varchar2(30);
BEGIN
   timer_name := GET_APPLICATION_PROPERTY(TIMER_NAME);
IF timer_name = 'CLOCK_TIMER' THEN
      SELECT TO_CHAR(SYSDATE,'HH24:MI:SS')
      INTO   :EVENTS.CURRENT_TIME
      FROM   DUAL;
END IF;
   EXCEPTION WHEN OTHERS THEN
      MESSAGE(TO_CHAR(SQLCODE)||''||SQLERRM);
END;
        Thank You
regards
aaditya.

The problem is that you have a local variable with the same name as the CONSTANT "TIMER_NAME". Therefore, your call to GET_APPLICATION_NAME is passing the value of your Local Variable to the built-in instead of the value of the CONSTANT 'TIMER_NAME."
declare
    timer_name varchar2(30);
BEGIN
   timer_name := GET_APPLICATION_PROPERTY(TIMER_NAME);
IF timer_name = 'CLOCK_TIMER' THEN
Change your code so your variable TIMER_NAME is unique (different) from the constant TIMER_NAME variable. A common programming standard prefix your variable names with the data time. Following this concept, rename your variable to V_TIMER_NAME.
Craig...

Windows 7 64 bit giving BEx Problems. Big time problems (!!)

Hi there, i just got through an issue with BEx connecting to SAP on a laptop using Windows 7. After googling and sdning and SAP noting for a while did not find any suitable answer to this issue which seems strange to me as Windows 7 64 bit is not really a brand new product. The full specs are as follow. Anyone bringing some light into this subject would be very much appreciatted.
=> SAP Logon 720 with 0 Patch Level.
=> MS Office 2007
=> Windows 7 64 bits
In C:\Windows i got:
     -> SAPMSG.ini
     -> Saproute.ini
     -> saplogon.ini
in C:\Users\username\AppData\Roaming\SAP\Common i got:
     -> Sapgrph
     -> saplogon
     -> SapLogonTree.xml
     -> saprules.xml
     -> Saproute
     -> services
The issue is that i am not able to logon either via BEx 7.x or 3.x. The Error message is:
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect to message server failed
Connect_PM MSHOST=/H/172.17.255.194/H/XXX.intranet.xxxxxxx.com, R3NAME=XX, GROUP=PUBLIC
LOCATION    CPIC (TCP/IP) on local host my-pc
ERROR       timeout while pending for route completion
TIME        Wed Jul 27 10:56:44 2011
RELEASE     720
COMPONENT   NI (network interface)
VERSION     40
RC          -12
DETAIL      NiErrSet
COUNTER     1

Hi Alex ,
SAP GUI for Windows 7.20 and all related applications including SAP Desktop Office Integration / BI Frontend / BW Frontend do not support Office 2010 64bit, only 32bit versions of Office are supported.
This means that when using 64bit operating sytems with SAP GUI for Windows and related components you have to use a 32bit Microsoft Office version .
For your issue , you can check these Notes.
1. 1442028 - SAP GUI for Windows 7.20: No support for Office 2010 64bit
2. 1264857 -   BExAnalyzer 7.X does not work on 64 bit Windows PCs
3. 1503786 - Precalc server is not created correctly in TA:RSPRECADMIN
4. 1589565 - Connection problem in Precalc server and Excel hangs
Regards,
Lokesh

Exchange Server e-mail only works on 4G or 3G 1% of the time - problem started suddenly

I've been receiving Exchange Server (Outlook) e-mail on my DROID RAZR through 3G and 4G since I got the phone last November. All of a sudden, over this past weekend, I am unable to send/receive on that account using 4G/3G except very very sporadically (once or twice a day for a few seconds). GMail is noticeably slower but appears to work, at least better than the Outlook account.
Internet through the browser on the phone works perfectly fine. However, I was unable to sync GMail contacts today, also. Further, I just tried to check for System Updates through the phone and was told that "check for update is not available at this time." I have no trouble making telephone calls or getting voice mail or texting.
Any ideas? "Sync e-mail over wi-fi only" is NOT on.
I have changed nothing on my phone. Nothing has changed with these e-mail accounts. The ONLY thing that has changed recently (of which I am aware) is that I had a non-functioning phone (not this one!!) removed from my Verizon Wireless account about a week ago, and they said it would take a few days, which would coincide with this past weekend. Is there some parameter that they could have changed at that time that would affect me receiving e-mail over 4G? Again, it is not affecting my internet connection.
My wifi is usually OFF because it runs the battery down, so that is how I know how bad e-mail over 4G suddenly became. The phone shows that it is getting 4G LTE. (I'm beginning to think this is a hardware problem.)
Thanks for any help you can offer.
Loyal (for many years) Verizon Customer

I understand how critical is to get emails while on our cellular network etymomel.
First I recommend removing your exchange server email completely, then power off and on to reset your device and then add email back. I also recommend to clear Data and Cache from your email application Menu>SystemSettings>Apps>All>EmailAccoutns(may be more than one)>ClearData/Cache as applicable. Keep us posted.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

Real time problems

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. no interview questions please. >
pls answer to the following questions,if it will be useful then you will be appreciated.
1 suppose in f-02 you didnot fill any thing in profit center field ,then it will gives the error,what you have to do?
2 dummy profit center is mandatory/not?
3 in a/r how can you enter the cash against customer?
4how can we deliver the stock to customer without invoice creation?
5 can you change the payment terms in vendor master record?
regards
jana

Hello Pramod,
There are many common problems during implementation / rollouts and these are mentioned in FAQs on OSS also SAP has suggested way on how to handle this so search with FAQs in OSS in the area of Material Management.
Also, you can go through success story on SAP website which will give you some highlights on Challenges.
There are some books available on implementing SAP sucessfully which explains the tips on how to handle SAP implementation.
here is some information
http://www.sap-img.com/sap-implementation.htm
<a href="http://amazon.com/s/ref=nb_ss_gw/102-7813067-4131348?url=search-alias%3Daps&field-keywords=sap+implementation">Books on Amazon</a>
If you have some particular query, please let us know.
Regards
Arif Mansuri

Indices configuration for XML document analysis (indexing time problems)

Hi all,
I'm currently developing a tool for XML Document analysis using XQuery. We have a need to analyse the content of a large CMS dump, so I am adding all documents to a berkeley DB xml to be able to run xqueries against it.
In my last run I've been running to indexing speed problems, with single documents (typically 10-20 K in size) taking around 20 sec to be added to the database after 6000 documents (I've got around 20000 in total). The time needed for adding docs to the database drops with the number of documents.
I suspect my index configuration to be the reason for this performance drop. Indeed, I've been very generous with indexes, as we have to analyse the data and don't know the structure in advance.
Currently my index configuration includes:
- 2 default indicess: edge-element-presence-none and edge-attribute-presence-none to be able to speed up every possible xquery to analyse data patterns: ex. collection()//table//p[contains(.,'help')]
- 8 edge-attribute-substring-string indices on attributes we use often (id, value, name, ...)
- 1 edge-element-substring-string index on the root element of the xml documents to be able to speed up document searches: ex. collection()//page[contains(.,'help')]
So here my questions:
- Are there any possible performance optimisations in Database config (not index config)? I only set the following:
setTransactional(false);
envConf.setCacheSize(1024*64);
envConf.setCacheMax(1024*256);
- How can I test various index configuration on the fly? Are there any db tools that allow to set/remove indexes?
- Is my index config suspect? ;-)
Greetings,
Nils

Hi Nils,
The edge-element-substring-string index on the document element is almost certainly the cause of the slow document inserts - that's really not a good idea. Substring indexes are used to optimize "=", contains(), starts-with() and ends-with() when they are applied to the named element that has the substring index, so I don't think that index will do what you want it to.
John

Spry menu response time problems with IE

We implemented the spry vertical menu for showing the
categories of a products catalog. It has almost 1400 categories
organizad at about 5 levels, some categories have about 20
subcategories. These categories are in a coldfusion session
variable.
It works perfect in mozilla, but in IE7 and IE6 in some
computers, present this problem:
- The response time is slow when you change from one category
that has subcategories to ahother. If you see the Windows Task
Manager of the computer while you use the menu, the processor use
go up to the top level.
And the effiecience of the menu decrease.
See in
http://edit.panamericana.com.co/
Thanks,
Alejandro

mdr4win wrote:
i dont think you understood my question, wasnt about body background, but abut the spry image slideshow to work properly in IE
I was not talking about body background, but about having markup that screws up your document when using a browser. Body background just happened to be there. Perhaps you would do well to have a look here http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Flittletreats.org%2F.
I have noticed that you ignored my solution; your document still shows two bodies.
Perhaps I should have mentioned that I tested in IE6 through to IE9 using IETester and the above was the only thing stopping IE from performing properly.
How did you determine that the slideshow was not working correctly in IE and which versions of IE?
Grumps

Timer problem

Similar Messages

Maybe you are looking for