Times displayed in graphs are 2 hours behind

Hi,
Not sure where to adjust this, but all performance graphs within OPSCenter on every asset is two hours behind (also the live graphs) time on the system is configured as CEST. The only time i needed to specify something in relation to a timezone was during installing OPSCenter configuring ASR credentials.
Cannot find any info in the documentation in regards to this.
Thanks in advance
Kind regards
Patrick

Updated to 12.1.1 issue solved

Similar Messages

How do I change the new iTunes play list total time display from 1.5 hours format to exact display of 1hr 31min 12sec.

In the new iTunes the play list total time displays in 1.5 hours format, how do I get it to clearly show 1hr 31min 12sec like before, I want the exact time so I can properly fit all the songs when I want to burn this playlist to a disc. You can no longer just click on it to change the display format. Nor can you right click, control click, or change it in options. If anyone knows I would very much appreciate your imput. Thank You.

Actually, that's the problem ... in iTunes *11* it has stopped working. I have the status bar displayed, and it is stuck on the 1.x hours format.
That is very, very strange !!
I can't get that to happen on mine. It worked in 11.0 and I updated today to 11.0.1 and it's OK.
I've tried making a new playlist, I've tried changing an old playlist, smart playlist ...... all OK ????

A Verizon cellphone tower in my area is feeding multiple Verizon Customers / Devices with the incorrect time (one hour behind) when we are in range of this tower

A Verizon cellphone tower in my area is feeding multiple Verizon Customers / Devices with the incorrect time (one hour behind) when we are in range of this tower (in this specific area). Our phones show the correct time in other areas. Is there a way to fix or report this?

The zip code that this is occurring in is: 87102
Specifically when I am at
1001 Woodward Pl NE
Albuquerque, NM 87102
Upon further investigation, it is happening to anyone with a Verizon handset, regardless of specific device. I have a Samsung Galaxy Note 3, and my co-worker has a Motorola Droid Turbo and we are both having the issue. Anyone on a different carrier (T-Mobile, AT&T) is fine, and is not experiencing this issue.
It actually looks like the cell tower is feeding us the correct time, but its like it forgot daylight savings happened. So it is feeding us the incorrect time zone/day light savings information.
When I goto Settings -> Date and Time on my Android device, I have both "Automatic date and time" and "Automatic time zone" checked.
the "Automatic timezone" it is pulling from the Verizon cell tower is "Mountain -7". It is correct that we are in the "Mountain" timezone, but we are currently "Mountain -6" (also known as day light savings). So the Cell Tower things it MST when it should be MST DST
When I uncheck "Automatic time zone" and select my own, suddenly it lets me select "Mountain -6" and doesn't even give me the option of "Mountain -7".
So in conclusion, some cell tower in the area of zip code 87102 forgot that daylight savings ever happened, and is telling cellphones they are in the "Mountain -7" timezone, instead of the correct current timezone of "Mountain -6 DST"
Edit: Oh, sorry, and to answer your question, it began happening about 3 weeks ago. We started noticing around March 25th, maybe a little after that.

Agent Real Time Displays 1 hour ahead

Greetings all,
Agent Real time display are showing 1 ahead hour of clock system.
Anyone have a suggestion if this is a bug or configuration issue ??
I have attached a screenshot to simplify
UCCX: 7.0

Hello Leonardo,
Could you please check if the time display by the Real Time Reports is the same time of the server??
Also I would like to know if the server and the agents are configure to use the same time zone??

Server time one hour behind

Running CF 7 on a Fedora Core Linux system that has the
system level time zone updates applied. A shell command of 'date'
returns the correct date and time.
However, we have some CF services and webpages that rely on
times and
#timeFormat(now(), "short")# returns the time one hour
behind.
I'm sure it has something to do with the new daylight savings
time changes ... but as I mentioned above, I have those applied to
the server and they are working correctly. Is there something that
needs to be patched to the CF server?
Any assistance is greatly appreciated - thank you.
Alan

Believe I found the issue .. this tech note indicates that
the JVM needs to be updated for CF to get the correct daylight
savings time
http://kb.adobe.com/selfservice/viewContent.do?externalId=d2ab4470&sliceId=2

24-Hour Time Display not allowed

Why on my iphone in settings>general>date and time. Is the 24-Hour Time slider (on|off) greyed out, and i can only display 24hour time format at the top of the iphone? I like am/pm display

b_behringer wrote:
24 hour is the only available setting in the UK right now. Why? No idea.
Are you inferring that there are multiple versions of the system software available (not firmware) for UK iPhones vs. US iPhones? If this is the case, this is a nightmare waiting to happen.
Can you imagine a 3rd version of the software for Germany a 4th version of the software for France, etc., etc.

How to display current time when the inputs are added together and display intervals every sec?

Hi, I added the values together but the time in the graph is not showing the present time.
The one that is not displaying the current time is the voltage graph.
On the x-axis of the voltage graph i want it to display every second interval.
Thanks.

You also shouldn't be using the local variables. Instead, actually add up the signals from the wires. What you have there is a race condition since you can be reading from the local variables before the terminal is written to.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

I'm attempting to migrate files from iMac to new MacBook air. The estimated time shown on the display is over ten hours. Is that correct? Is there a way to do it quicker?

It's quite possible, since you are using an MBA without Firewire, that it could take that long.
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
>Classic Environment, and subsequently any Mac OS 9 or earlier applications
>Screensavers written for the PowerPC
>System Preference add-ons
>All Unsanity Haxies
>Browser and other plug-ins
>Contextual Menu Items
>Applications which specifically require the PowerPC G5
>Kernel extensions
>Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
>MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
>MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
>MacBook Air- Migration Tips and Tricks;
>MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
>In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
>
>In your /Home/Library/ folder:
>/Home/Library/Application Support/AddressBook (copy the whole folder)
>/Home/Library/Application Support/iCal (copy the whole folder)
>Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
>
>/Home/Library/Keychains (copy the whole folder)
>/Home/Library/Mail (copy the whole folder)
>/Home/Library/Preferences/ (copy the whole folder)
>/Home /Library/Calendars (copy the whole folder)
>/Home /Library/iTunes (copy the whole folder)
>/Home /Library/Safari (copy the whole folder)
>
>If you want cookies:
>
>/Home/Library/Cookies/Cookies.plist
>/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
>
>For Entourage users:
>
>Entourage is in /Home/Documents/Microsoft User Data
>Also in /Home/Library/Preferences/Microsoft
>
>Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

Jvm time 1 hour behind system time

hi
I'm running java on hp-ux 11.11
since the system time has changed to dst, the java applications are still showing the old time (1 hour behind)
for example
now.get(Calendar.YEAR)+"/"+now.get(Calendar.MONTH)+"/"+now.get(Calendar.DATE)+" "+now.get(Calendar.HOUR)+":"+now.get(Calendar.MINUTE)+":"+now.get(Calendar.SECOND)+":"+now.get(Calendar. MILLISECOND)
will give the output
2005/7/16 1:28:58:905
and the tcsh date command will give the output
Tue Aug 16 13:28:58 IDT 2005
any ideas on how to synchronize the jvm time with system time?
thanks
Yiftah

I can only confirm that's its true for me too. I was ok on Win98 but shows up on WinXP with summer time (during winter time it was ok. )

Photos. They are on my macBook, backed up on time machine. Copied them (hours and hours) to external hard drive. They are now in alphabetical order (19,000 of them) NOT IN THEIR EVENTS or date order-and have been taken with different cameras- help!!!!!!

Photos.
They are on my macBook, backed up on time machine. There are 19,000+ of them, some rescued from a pc crash- which I used the nifty iPhoto to put back into date order.
I want to take them all off my laptop, now............as I need to use it for WORK!!
Copied them (hours and hours) to another external hard drive.
They are now in alphabetical order (all 19,000+ of them) NOT IN THEIR EVENTS or date order. (-They have also been taken with different cameras over the years and some of the generic camera numbering remains.)
I have tried to copy them (only a few as an experiment) one event at a time, but that again "opens up" the Event "folder" and tips them out as individuals and therefore just lists image letters and numbers alphabetically.
How can I copy
the whole library still in "Events" to an external hard drive?
the folders/albums I have already made on to this hard drive?
and how can I add to this back up monthly, again keeping events and folders separate and updated?
Mac is so user friendly - there must be a way.........
Thanks

UPDATE : I have re-installed from disk, various apps that were no longer functioning such as iLife, iWork etc. So, I now can access my photos again.
Also, I had to re-install all the software for my printer ( Stylus Pro 4880 ) and reset it so the printer is working again.
Photoshop CS4 won't open. I think I will have to get in touch with Adobe as basically, I guess they have a built-in "blocker" which prevents me from opening the app as the license is for only 1 user and having re-installed the OS, there are now, in effect, 2 users ( Me and Me 1, I think ).
So, having added on a new external HD, Time Machine has made a copy of most of the files, folders, apps etc onto the external HD. The internal HD is still nearly full ( 220 GBs out of 232 GBs ).
I am guessing the way to go now in order to free up space on the internal HD is to delete/trash older photos from my iPhoto library and hope that if needed, I will be able to access them on the external HD.
Am I correct ? Please advise before I do something I will regret.
Thanks, Sean.

I am looking for an app that can unmute my iphone after a preset time, eg 1 or 2 hours. Does anybody know an app with this feature?? The apps I have found are linked to a calendar or a place, I just need the timer function..

I am looking for an app that can unmute my iphone after a preset time, eg 1 or 2 hours. Does anybody know an app with this feature?? The apps I have found are linked to a calendar or a place, I just need the timer function..

thanks. yes i am aware of the VoiceOver feature but it is NOT the solution to my problem. as you said, it is a solution to a different set of issues. i want the text to speech ability because i there are books i need to read but do not have the time to sit down and read them and have become used to listening to them read to me either by a professional human reader or with the text to speech software on the Kindle.
I think Apple makes the best audio devices but i am really disappointed in this inexplainable shortcoming. if apple can give us siri they ought to be able to design a nice little button that i can push to turn on text to speech while i am in a document, book, magazine or webpage. clearly it is possible as apple has added the "reader" button in safari to have web pages dropped into the reader format.
thanks for your suggestion though, it is what everyone suggests but it does not address the issue.

The server clock on a website I use is 5 hours behind. When I use Internet explore, the time is correct.

The server clock on a website I use to make t-times (FORETEES) is 5 hours behind the current correct time. The time has always been correct until this morning. It is necessary for the server clock on this web site to be the same as my current time. I used IE to get into the FORETEES web site and the clock was correct on the FORETEES web site. What happened between yesterday and today on the Foxfire servers...

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

HT4576 My time zone is 3 hours behind and won't allow me to change it. Even when I turned it off the clock time is 3 hours behind!

The instructions given did not work, I'm still 3 hours behind. What do I do to get it back to Eastern Standard Time? It changed when I updated yesterday

The instructions given did not work, I'm still 3 hours behind. What do I do to get it back to Eastern Standard Time? It changed when I updated yesterday

Time display goes to minus 22 hours

This has happened 3 times now in 2 different projects. I'll be in the middle of editing and the time display will suddenly show MINUS 22 or 23 hours and it'll be impossible to reposition the playhead on the timeline. So far the only way I've found to recover is to restart the computer. It's been so random I'm not able to diagnose what kicks it off yet.
Just wondering if this has happened to anyone else?
I have all the latest versions of everything; 2012 MBP, working off an external LaCie RAID via TB.

Despite what it says in the post I have OS X 10.10.2 (Yosemite)

Create an absolute time display that can be paused and scrolled

I have 3 waveform graphs that are scrolling by as the data is collected. They represent past events that can be paused, scrolled back, and printed. It represents 8 hours of data. I do not have a time stamp associated with the data going into the graphs at this time. I dont want to reinvent the Field Point code that is gathering the data just tweak the Host program that monitors the data (this would require flying to the customer site). I need to have a absolute time clock that will keep up with the data that is scrollong by and pause when the graphs are paused (that is the easy part). Here is my challenge. I am using a property node from all three graphs. I have the x scale-range-all elements tied together so they will all scroll together with 1 x scroll bar. I need to be able scroll the absolute time clock with the other information.
Any ideas?
AUTOM8

Hi,
You can use the Get date/time function to get time when the data is recorded. However be advised that this time would only be close to the actual time of data acquisition. It will not be the actual time when the data was acquired.
As for scrolling the time display, I think yout best bet would be to tie in a time stamp (Get date/time function ) with the Y values that you are already acquiring. Then when you scroll to a particular point in the graph, you can programmatically unbundle the waveform at that point to get the time value.
Regards,
Ankita

Times displayed in graphs are 2 hours behind

Similar Messages

Maybe you are looking for