Times in Messages

Hi,
What controls the display of message sent/received times in Messages? I'm in a conversation at the moment, and there are times before each exchange until the middle of the afternoon, nothing after.
Where can I find more about this? I can't seem to find a KB, but then I'm a lousy searcher.
Thanks,
Jeff

Hi,
I find that some conversations look like every iMessages is time stamped as they are so far apart in time (Normally the ones from my wife saying OK when I have messaged her about sudden overtime at work).
Others have long periods when both sides are sending iMessages but there is not time stamp that can be fitted in (or so it seems)
It is also possible that the iMessages servers (there will be several to prevent system "crash" if one goes down) were out of sync fro a while which also would have meant time stamps would be "out".
Try http://www.apple.com/support/systemstatus/ if you see it again. It may not be reported there as the service is still working.
I do notice though that if you scroll back to Sunday there were so iCloud issues for some. Whilst iMessages only uses an iCloud ID (and check the password with the Apple Central computers for that) it might possibly had some side effects that passed on to iMessages.
9:39 pm Tuesday; November 4, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Similar Messages

Tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery

tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message

Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

Existing Apple ID is not longer working with Face Time and Message on the iPhone after iOS 6

After the IOS 6 update on my iPhone the Apple ID is not longer working with Face Time and Message. Each time I try to log in I receive the message that the password or the user is not right. But they are, because on all other devices and all other parts of the iPhone (iCloud, AppStore, iTunes) they are working. Other Apple IDs are working fine.
What's wrong? Any idea?
Thanks

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

Run time error message when I try to open itunes?

I cannot open itunes afte using it for 3 years. I receive a run time error message.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turing off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

As of version 31, why is there still no Thunderbird option to insert current date and time in message that you are writing?

As of version 31, why is there still no Thunderbird option to QUICKLY insert current date and time in message that you are writing?
Literally have seen this very-much-needed -- and used -- option "promised" for three years now, and even if there's only one or two formats that could be used, at least the option is there.
It seems only way is to link a Macro and tool to Thunderbird and do it that way.
Joe Rotello
[email protected]
Skype: joerotello

Where was it promised? A quick search of Bugzilla didn't find a functionality request bug report for it.
I assume you're aware that Mozilla stopped development about 2 years ago (just adds security/stability fixes and provides infrastructure) and all new features and bug fixes are now added by the community. They seem pretty tied up with bug fixes and reworking some hard to maintain components such as the MIME support.
Have you tried the Timestamp add-on at https://addons.mozilla.org/en-us/thunderbird/addon/timestamp/ ? The version at AMO doesn't support versions later than 2.0 so you'd need to do something like install the disable add-on compatibility checks add-on at https://addons.mozilla.org/en-us/thunderbird/addon/checkcompatibility/?src=ss, and ignore the warning message about Timestamp not being compatible. However, the author has a version at http://extensions.sanjer.nl/?page=tb_ts that supposedly supports up to Thunderbird 11.9.x so it should be "compatible by default as it supports version 5 or later and is not a binary add-on like Lightning or Enigmail.
"For Thunderbird use the context menu (right click popup) in the compose window, Ctrl+Shift+T or "Options | Insert timestamp" to inserts the date/time into a message"

HT4623 is there a way to time stamp messages?

is there a way to time stamp messages?

Hello colbaltblues,
Your messages timestamps can be viewed by dragging any bubble to the left.
See what time a message was sent or received. Drag any bubble to the left.
iPhone User Guide - Send and receive messages
http://help.apple.com/iphone/7/
Cheers,
Allen

I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.

I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic." Comcast tells me server is not down all other network activity is fine. WHat's up with this?

Starting earlier today, this also became my problem - can receive but not send in Entourage. The account settings are correct in Entourage - I even created a new account. My Mac running 10.7.5 won't read the original Office : MAC 2008 disk, so I can't do a fix or reinstall from the disk.
This is not an issue if I log onto the Comcast site.
And so, I started using Mail but, unlike Entourage, Mail won't import my Entourage info.
Argh... :-(

Migration from Access97 - Run time error message

When I am trying to migrate from Access 97 to Oracle 8i Using Migration Work Bench I am getting the following error message.
Microsoft Visual C++ Run Time Library (Message Title)
Runtime Error
Program: C:\ProgramFiles\Oracle\jre\1.1.7\JREW.EXE
Abnormal Program Termination
OK (button to click.)
Please help me with your valuable input.
null

And is a boolean operator. Try it like this instead:
Select Case ComboBox1.Text
Case "Banks"
Sector = "Bank"
Index = -0.086
Case "Mobile Telecommunications"
Sector = "Mobile Telecommunications"
Index = -0.024
Case "Real Estate Investment Trusts"
Sector = "Real Estate Investment Trusts"
Index = 0.132
End Select
Still lost in code, just at a little higher level.

Real-Time Outbound Message Time-Out

Hello,
Could anyone give advice on how to properly handle Time-out errors when sending Real-time Outbound Messages?
On the XAI Sender, I have set the HTTP Timeout context value to 30 (I'm assuming this is 30 seconds), but the server just keeps on retrying to send the message and eventually takes about 1-1.5 minutes before it eventually stops trying.
Also, does anybody have any ideas on how to indicate the page is currently busy while trying to send the outbound message?

hi andries
can i know what type of invocation type you are using in external system
If you use RTHTTPSNDR on xai sender then you must use invocation type as realtime on externalsystem( you can define xsl for both request and response)
If you use HTTPSNDR then you must use invocation type as XAI (for which you can define a request xsl but not response xsl)
so my advice is to go with RTHTTPSNDR and define both request and response xsl files
MOST Important your xai sender never gets refreshed unless you restart your ccb server this is because invocation is REALTIME
if you use HTTPSNDR then just by going to xai command you can refresh mpl refresh sender command
I think its a bug in ccb 2.3.1 sender doesnt gets refreshed with new values
Now for the purpose if you can post your request schema and then the request xsl and the response xsl ,ill clear your doubt happily.

Run time err message

when i try to print something a run time err message pops up and it wont print.

Saamy,
is this application 64bit?
If not, you need the 32bit version of the RTE....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Apache err log on http server *broken pipe* each time a message comes thru

I've noticed on our http server, each time a message comes through for B2B we consistently get the following entries in the Apache error log:
(32)Broken pipe: MOD_OC4J_0087: Got an unexpected error while calling send() to send a message to oc4j and the error code is 32.
MOD_OC4J_0053: Failed to call network routine to send out an ajp13 buffer message to oc4j.
MOD_OC4J_0027: Failed to send out an ajp13 message to oc4j.
MOD_OC4J_0026: Failed to marshal a request to ajp13 message headers or send them to the web container.
Any idea what's causing this? Everything seems to be going through OK.
I'm trying to track down an issue that occurred over the weekend. I don't think this is related, but I do need to address it.
Thanks.
[

Hello,
Here is my 2 cents.
Oracle recommends you set the Oc4jCacheSize parameter to reduce the occurrences of MOD_OC4J_0087 and
related errors in your Apache error logs. To change this parameter, follow these steps:
1. Stop the OPMN processes on the middle tier.
2. On the middle-tier computer, open a terminal window and go to $ORACLE_HOME/Apache/Apache/conf.
3. Enter the following command:
cp mod_oc4j.conf mod_oc4j.conf.pre3604573
4. Edit the mod_oc4j.conf file by adding the following line after the </IfModule> line, but before the
Oc4Jmount /j2ee/* line:
Oc4jCacheSize 0
5. Start the OracleOPMN processes on the middle tier.
I would still suggest to analyze the stack trace further for exact issues.
Rgds,Ramesh

Iam getting run time error message when i try to open dream weaver cs4

iam getting run time error message when i try to open dream weaver cs4

exact message am getting when i try to open dreamweaver cs4- this application has requested the run time to terminate in it in an unusual way . please contact the applications support team for more information.

Cannot open time machine; message on screen: time machine in backup. I want to find last 12 mos. of pictures.

cannot open application to time machine: Message on screen: time machine in backup.
Purpose to get into time machine; is to pickup lost photos

northernresort wrote:
I workedwith apple support on the phone it believe the backup is corrupt.
Yup, sure sounds like it.
It does have a .sparsebundle for the machine that is backup up. There is only 52G free on the 1T time capsule, so it seems that the data is there,
That's good, obviously. Often it won't mount at all, and you're in a very large pickle.
I'm not seeing nor beleive I'm having a hardware issue with the time capsule.
Probably not.
I'm wondering if I have some sort of version issue between 10.7.x that the Time machine on the time capsule was created with and 10.8.4
No, at least not that's been reported. A sparsebundle is a sparsebundle, as far as we can tell.
I don't use hdiutil or fsck, so bear with me. Drag the sparsebundle into Disk Utility's sidebar and try Repair Disk on it. See what messages it shows. (They may not appear in the window; click the Log icon or select Window > Show Log from the menubar.)
Do you have a copy of DiskWarrior? It can operate on a sparsebundle, and sometimes can fix things Disk Utility (and hdiutil or fsck) can't.
I haven't found any good way to parse out/copy files from a sparse bundle
If you double-click it, does the disk image (named "Time Machine Backups") mount (should appear on your Desktop and/or Finder sidebar)? If it does, can you open it via the Finder? If so, you'll find the usual Backups.backupdb folder inside, with one folder named for your Mac, and inside that all the date-stamped backup folders, each with one folder per drive that was backed-up, and inside that the full folder structure.
If so, you can probably drag & drop, but depending on what kind of damage there is, and where, that may not work well, if at all.
Best, of course, is if you can repair it and just do a full restore.

HT201210 I have updated my iphone 3 version 4.1.but in the middle of the updating time one message is coming.that is,(the iphone``iphone ``coundnot be restore and unknown error occured( 1015 )

I have updated my iphone 3 version 4.1.but in the middle of the updating time one message is coming.that is,(the iphone``iphone ``coundnot be restore and unknown error occured( 1015 )

Your phone is jailbroken. You can not get help here.

HT201413 why do i get a time out message every time i try to purchase a song

why do i get a time out message every time i try purchase a song

Did you already check this article?
iOS: Recommended settings for Wi-Fi routers and access points
More things to try:
Wi-Fi network issues
Make sure that your Wi-Fi network is set up using the recommended settings for Wi-Fi routers and access points.
If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
If you're using router, firewall, or security software that restricts Internet access, make sure that the ports documented in Using FaceTime behind a Firewall are open.
FaceTime requires a broadband connection. Performance might vary according to network throughput and usage.
copied from iOS: Troubleshooting FaceTime

Times in Messages

Similar Messages

Maybe you are looking for