Times moves really fast EFFECT in Final Cut Pro

I want to know how to do the effect used in Paranormal Activity. Like this (http://www.youtube.com/watch?v=F_UxLEqd074) at 0:40 seconds. This time moves really fast, implying that time is going by really fast. How do you do this?

At :40 I see the camera pointing downstairs in the living room. I don't see what you are meaning. But typically this effect is done by either shooting timelapse...meaning one frame every few seconds or minutes. If you can't shoot timelapse, simply shoot the same things for a loooooong time, then adjust the speed of the slip by a few hundred or thousand percent.
Shane

Similar Messages

When I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

when I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

Because your clip properties do not match your sequence settings.
It will help a lot if you provide details ...
FCE Easy Setup
Sequence settings (vid rate, frame size, compressor)
Source of your clips (camcorder make/model, etc)
Clip properties (vid rate, frame size, compressor)

Is there an easier way to work with adobe after effects and final cut pro x

I use adobe after effects and I am thinking about deleting motion and compressor ( I can always install again). If you have a good reason to keep those apps let me know because I don't want to be hasty. If I delete them and stick with after effects and final cut pro... Is there a secret to easy working between FCPX and adobe after effects?
Thanks

You'll go from FCP X to and from Motion a lot easier than AE. Motion does pretty much anything AE does, most of the time faster and easier. Without Motion, you can't do custom templates. You can't customize the encoding of files without Compressor. Why would you want to remove them from your system? Leave them, use AE if you want along side of them. But I'd learn Motion first. Cause AE doesn't read FCPXML, so going back and forth between them is a PITA.
And until Apple releases the round trip between FCP X and Motion fully, we have this gem:
http://www.alexnking.com/2012/02/20/fcpx-send-to-motion-app/

How do i create a spotlight effect in final cut pro x

How do i create a spolight effect in final cut pro x any help would be greatly recieved!!
all i can find is tutorials for how to do the effect in the older version of final cut
Many thanks!

In the Timeline position your Playhead at the starting position.
In the Viewport position the Shape Mask at the starting position.
In the Inspector click the Add Keyframe button.
Press Control-V to open the Animation Editor to see your keyframes.
Move the Playhead and the Shape Mask to a new position.
In the Inspector click the Add Keyframe button.
Continue adding keyframes until you have defined the Shape Mask’s movement.
Regards
Nolan

Where can I find a good, free effect for Final Cut Pro of electrocution?

Where can I find a good, free effect for Final Cut Pro of electrocution? I'm using it for a taser sequence.
Thanks!
Matthew

Open Motion, look for lightningin the generators. From there, it's a question of figuring out how it works and what you need to do to make it work for your sequence. That's about as free as it gets and it will ony be as good--even if someone else did the work for you--as the amount of time you're willing to invest.
bogiesan

New Canon EOS Movie Plug-in-E1 for Final Cut Pro

Just thought your would like to know. From canonrumors.com
http://www.canonrumors.com/2011/04/canon-updates-e1-plugin-for-fcp/
Canon today announces the latest update for EOS Movie Plug-in-E1 for Final Cut Pro – the company’s custom-developed software application that provides quicker and easier editing of EOS Movie footage in Apple’s Final Cut Pro software suite.
Launching to coincide with the start of the 2011 National Association of Broadcasters (NAB) Show in Las Vegas, EOS Movie Plug-in-E1 for Final Cut Pro version 1.2 will make the importing of EOS Movie files even easier, allowing users to transfer files from any folder, without needing to mirror the folder structure on the camera itself.
The update also enables smoother importing from Canon’s EOS 7D, EOS 5D Mark II and EOS-1D Mark IV models, allowing users to import footage without requiring the THM file generated by the camera.
Originally launched in February 2010, EOS Movie Plug-in-E1 for Final Cut Pro is designed to quickly and seamlessly convert EOS Movie footage from Canon’s leading range of EOS DSLR cameras to Apple’s high-quality ProRes 422 codec. The plug-in allows users to convert footage at approximately twice the speed of Apple’s standard conversion, creating a smoother workflow for the rapidly growing number of videographers shooting HD video content on DSLR cameras.
EOS Movie Plug-in-E1 for Final Cut Pro version 1.2 will be available to download for free from 25th April 2011.

And I just spent over an hour yesterday explaining to a client how utterly essential it was to maintain the exact folder structure for proper log & transfer:/
If I say that once a day to students, I say it a thousand times.
On top of that I just started Carbon Copy Clone today with all my updates in my editing lab. Not the end of the world but it's a little time consuming on 80 stations. Oh well.

After effects vs final cut pro?

Is comparing adobe after effects to final cut pro, a fair comparison? What I mean is, looking around on youtube, I see better... effets on projects made with projects on after effects. now, I love FCP for editing, does adobe give a better program thats can do effects. I am looking to make my videos look more profesional, and I notice after effects has effects built into its system to do effects.
After looking at this vidoe, im sold, final cut pro can not do this that quick.
http://videocopilot.net/products/action2/tutorials/guided_tour/

David Bogie Chq-1 wrote:
I am looking to make my videos look more profesion< </div>
Effects do NOT make your videos more professional. Professionalism is the only thing that can make your videos appear to have been produced, written, shot, and edited by a professional. Even faking professional video requires elevated professionalism.
Hey! Just wait one second! That's is NOT what is promised by Apple and whoever makes those promises! All I have to do is buy the computer and the software and I'm a "professional!"
But I truly and strongly encourage you to go ahead and purchase After Effects based solely on the Video Copilot tutorials. Know in advance that AE is about ten times as complex as FCP ever will be and you will want to post extensively in the Beginner's AE Forum on the cow.
bogiesan
I would also suggest extensive posting in the FCP Beginners forum on the Cow for the OP.

Quicktime 7.1.5 Doesn't Install Movie To Apple TV in Final Cut Pro 3

Quicktime 7.1.5 Doesn't Install Movie To Apple TV in Final Cut Pro 3. A bug? Or on purpose on the part of Apple?!

There has been some reports that exporting to Apple TV doesn't show up in some versions of FCP. If it doesn't show up in your version of FCP please read this thread:
http://discussions.apple.com/message.jspa?messageID=4285687#4285687

How do I turn on the GUI controls for the Focus Blur Effect in Final Cut Pro X

I can't find the setting that enables the GUI control overlay to manipulate the parameters of the Focus blur effect in Final Cut Pro X. When I have the clip and the focus effect selected I only get a center element overlay. At one point I had controls for all the other elements of this effect.
anyone know a shortcut or how I can toggle these controls back on?

I don't see any other screen controls either.
Maybe there was a change sometime, or maybe you were using a different effect?

How do you move text edited in After Effects into Final Cut Pro?

I edited text in After Effects and want to use it at the start of my movie which is in Final Cut Pro.
How do I export the After Effects editted text into FCP?
I have FCP 7
Thankyou

I suppose the way to do it is to export to Quicktime and import that into FCP X.
Use ProRes 4444 codec in order to preserve transparency (alpha channel).

Exporting from After Effects to Final Cut Pro

Hi
Could anybody tell me the best way to export from After Effects, back in to Final Cut Pro? Do I need to get Automatic Duck for this, if so which one?
Thanks for any help!
Matt

You need to add your composition to the render cue and then export to the same format and codec that you're using in FCP. Automatic Duck is a great tool for getting your FCP or Motion timelines into After Effects but most of the time I simply select a clip in FCP, export it as a reference movie, bring it into AE for processing, then render a file to use as a replacement in FCP.
Search for After Effects Final Cut Workflow and you'll find some more tips including this one. It isn't bad for organization but it misses the point of using the same codec. All my FCP projects are ProRez HQ or ProREZ 444 so that's my choice. Also, if you use the entire shot, which is not a bad idea, then you can use the replace footage option in FCP which is more efficient than the demoed technique of dragging your rendered shot into the timeline and then trimming if needed.
Hope this helps.

Exporting .Mov files at 24fps for Final Cut Pro 5

I work at an animation production house and we're trying to export .mov files from QT 7.1.2 at 24fps so they won't have to be rendered in a FCP project which is a 720p project with a frame size of 1280x720, we're experimenting with two codecs. We're using Motion Jpeg A and Photo Jpeg, selecting 24fps but for some reason they import into FCP 5 at 10fps. It's as though QT isn't outputting accurate 24fps .mov files. When I export .mov files from FCP they import back into FCP without having to be rendered. What's the difference between the ones exported from QT vs. the .mov files exported from FCP. We're using the exact same settings and files....? The reason we need to use QT to do this is because it needs to be a somewhat automated process (lots of stills to work with) and our PA's are working on Windows with QT only.

You should post your inquiry at Final Cut Pro section for better support. Anyway, Final Cut Pro does not always recognize the frame rate correctly, depending on which application (and possibly which codec) you used to compress video. For example, Snapz Pro X and Adobe After Effects don't get along with Final Cut Pro in this respect. Furthermore, compressing video in H.264 will be a bad idea. So simply adjust the size of Canvas so that it won't cover the whole screen. In this way, you can even replay video on Canvas and even send it for final production.

Melting mirror effect in Final cut pro 7

Hi Guys,
I finally managed to get a tutorial which teaches me how to make the demon face effect but its in motion not in final cut pro.. but anyways I wanted to know if any of you guys know how to melt a mirror in final cut pro??
-A

You can't -as in there's no magic button for it.
There might well be third party plugins that can do something along those lines.
But why pay for them? You already have Motion.
Time to get the Motion manual out.

Titles lose glow effect in Final Cut Pro X

Im using Final Cut Pro X and when I create a title with the glow feature after a while of editing the feature turns off and you can't make the title glow anymore without creating a new one. Still after you make a new one soon the glow effects eventually turns off but it says it's on.
The project im working on is an hour long. Also it's had one other glitch where in three clips one to two frames go blank. After I added titles to the clips the frames went back to normal and the others that i didnt want text I added blank titles to fix the frames. Any advise on what I should do?

In the Timeline position your Playhead at the starting position.
In the Viewport position the Shape Mask at the starting position.
In the Inspector click the Add Keyframe button.
Press Control-V to open the Animation Editor to see your keyframes.
Move the Playhead and the Shape Mask to a new position.
In the Inspector click the Add Keyframe button.
Continue adding keyframes until you have defined the Shape Mask’s movement.
Regards
Nolan

How to achieve the distort motion effect ala Final Cut Pro in Premiere CS4?

Newbie here.
I have just recently started with video editing. In Final Cut Pro I have the option to distort a still image in the motion/effects panel. In premiere cs4 I only find the option to scale it up/down without the option to individually distort the four corners. Does anyone know how this can be done in premiere cs4?
The effect i am going for is the same as in Apples presentation of iPad. http://www.apple.com/quicktime/qtv/specialevent0110/
I have an presentation wich I need to insert all the slides from the powerpoint presentation in the video.
Any help would be appreciated. ( I have searched around for an solution, but without results)
Regards T

Here is a resource, that deserves a bookmark, the PrPro-Wiki. Plenty of great FAQ articles and tutorials.
I see the "Distort" part of the Effect in FCP, but the "Motion" aspect was throwing me. I kept thinking Posterize Time, and that is anything but what you were looking for. That's why I was going to head to Google for the FCP Help files, or similar.
Good luck,
Hunt

Times moves really fast EFFECT in Final Cut Pro

Similar Messages

Maybe you are looking for