Times of events change from mobile me to touch

When i sync mobil me to I touch the event times change

OK, I think I have it figured out--at least my problem seems to be solved.
I noticed that each event was off by exactly 5 hours, that is, my iCal event (on my MBP) was 5 hours earlier than the time shown on my iPod Touch. I am in New Orleans, and I happen to know (because I was a blue water sailor for many years) that here we are 5 hours behind GMT. So I went looking on the iPod for something that might make that adjustment.
Sure enough, if you go to Settings/Mail, Contacts, Calendar, then scroll down to Time Zone Support--turn that OFF. That solved the problem for me. Calendars are synching perfectly now. Hope this helps you and others with similar problems.

Similar Messages

Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time. You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up. Like it

Why is does my apple run SLOW.you go to open a program and the circle thing just spins for a delayed period of time. You change from typing in a word doc and go to say email or internet and it takes several minutes to allow you open anything up. Like it is frozen. I have tried rebooting the computer and it works for a few minutes then gets stuck.

Which model iMac do you have?
How large is your HD and how much space do you have left?
Check out the following & do the necessary:
User Tip: Why is my computer slow?
What to do when your computer is too slow
Speeding up your Mac
OS X (10.6.6)
Use Software Update or the OS 10.6.8 combo update to update your OS. Also, update everything SU has to offer for your computer. When done, repair permissions and restart your computer.

1ms Time Loop / Event Trigger from Counter

Hi. I'm pretty new to LabView so I'm am hoping this is an easy question:
I need to read the pulse signal from some reluctors (toothed wheels that pulse a signal with each passing tooth). The amplitude of each pulse is above 2.2V so I was planning on using TTL counters.
I need to record the status of 5 counters with each increment of one of the counters For the RPM and tooth count, I can do this with a 1ms timed loop.
Question: Can windows successfully give a 1ms (accurate) timed loop? I know this depends on how much I am doing inside the loop but, for now, I just need to read 5 counters and store the data with a timestamp.
Is it possible to make a counter throw an event? If the counter is incrememented, can LabView be notified to then go off and handle a block of code?
Thanks for any help you can offer!

I assume you also have an analog input card for the chasis?
So, it's probably possible to get 1ms timing with software timed loops, however based on my quick check of the manual for your chasis
http://www.ni.com/pdf/manuals/372780c.pdf (see section 2-2 for example)
You can use an Analog Comparison Event or a PFI channel to trigger a sample (i.e. your generated pulse is the sample clock). This could allow you to use your pulse to trigger an analog sample. Now, this doesn't get you timing information (it just gets you the value of the analog input at the time the event occurs). To get a time, you can use the counters on the digital card in the same way. You have the counters be driven by a fast sample, on-board clock. Then you can use your pulse events again to sample that clock. So each pulse, you get one analog voltage sample and one time sample from the counter. The resolution on this counter will be great, depending on how fast your counters can be driven (sometimes NI counters can actually be driven faster than the fastest available clock on the card or chasis).
Or you can just do the software loop.

Time measure has changed from frames to centesimal.

After upgrading from QT 7.2 (or 7.1) to 7.5 today the time measument in the film info window has changed from showing the time in frames to showing it in seconds with decimals.
Now shows time as 00:00:03:96 instead of 00:00:03:24.
I have looked around in the settings but can't find anything related to this.
I use QT-player for animation production, I need to have time displayed as frames.
Is there some way to change this or do I have to revert to my old version (not working with Firefox3)?

Yes, thanks, I've noticed that change which is nifty.
But it doesn't change the time display in the info window where before, I could have the time displayed as minutes:seconds:frames. With the new display I can have frames only, not seconds:frames.

When syncing calendars between mountain lion and ios6 on iCloud, the times of events change

When I sync calendars between my iphone 4s running ios6 and my macbook pro running mountain lion 10.8.2 using icloud, the start times and end times of my events change ... very frustrating !!!

This is usually due to one of the two devices having the wrong time or being in the wrong time zone.

HT1338 My MacBook Pro is running OSX 10.6.8. I understand that to change from Mobile me to the Cloud I need to run 7.1. There are no updates outstanding. After reading this update page, I do not know what to do next to get to 7.1, or am I ok with curre

I am trying to move from Mobile me to The Cloud which requires version OSX 7.1. My version is 10.6.8 and is fully updated using the instructions provided on how to perform the transfer to the Cloud. What do I do next to get to the 7.1?

Welcome to Apple Support Communities.
If your computer meets the minimum requirements, you can purchase and download OS X 10.7 'Lion' from the Mac App Store online. It is also available on a flash drive at about double the price of the download.
http://www.apple.com/macosx/
Specs, minimum hardware requirements, and upgrade paths for OS X 10.7 'Lion' are also listed here:
http://www.apple.com/macosx/specs.html
Even though Lion runs in 2GB system RAM, 4GB or more is highly recommended.
Also be aware that Apple recently announced the next version of OS X, 10.8, called 'Mountain Lion', but no firm date for availability, other than 'coming this summer.'
http://www.apple.com/macosx/mountain-lion/

ISync receives changes from mobile phone but stopped sending changes

Trying to sync this morning with my Nokia 6682. Everything has been working perfectly until today. iCal receives changes from the phone and makes them on the calendar but the changes in iCal are not being sent to the phone. All the iSync log says is that the sync failed. The phone connects to iSync and starts to apply changes to the phone and then just zips to the end and gives me the error.

Hello, I've read that you have write about "iSync agent" what is it?
I would like to say that the address book start to run (but I don't know why) but the calendar still not...
Very strange...
G5 dual 2.3 - 2.5RAM / PB 17" - 1GB RAM Mac OS X (10.4.4) Three Cinema Display Monitor
G5 dual 2.3 - 2.5RAM / PB 17" - 1GB RAM Mac OS X (10.4.4) 3 Cinema Display Monitor 20"

The TIME & DATE are changing everytime I synch my touch(((( How to fix it

hi,
The TIME & DATE are changing every time I synch my touch by pluging it into the computer (not if I sync manually).... AND the time is not the same as on my computer...
I searched the INTERNET and a very BIG number of people are having the same problem as me.... WHY APPLE can't do anything about it?!!? it drives me crazy like ****
My Ipod is not jail broken and my current version is 2.0.2
................................

I had this same problem when I first got my iPod touch. The solution is simple. When you use iTunes and don't close it when your computer sleeps/hibernates, the time on iTunes stays the same as when you put your computer on sleep.
Try to open up iTunes, and close it when your computers sleeps, and then open up iTunes again and sync your iPod touch. Don't forget to close up iTunes when you put your computer on sleep.
Hope this helps!

Slow loading time of cdn assets from mobile

our requests to cdn got very slow in our mobile version (about 5-15 sec for picture)
in our "regular" site the cdn is working ok. (the devices located in the same place in the same network)
any idea?

Is the loading time in mobile device specific to this image? Just trying to understand if there is a lag attributed to device or mobile browser performance. I've not experienced any lag for CDN content in the mobile in the same WiFi my laptop was
connected to.

The Creator of an Assigned Tasks is not Updated when Changed from Mobile Device

We have a Shared Mailbox where we create Tasks and assign them to the appropriate engineer. In Outlook, if they open and modify the assigned task, after they have accepted it of course, and then save it, a message is received in the Shared Mailbox with the
update. When that is opened and closed, the task on the Shared Mailbox is updated.
However, if that Task is updated on a mobile device, WP8.1 in this case, the creator does not get a new message with the changes. If the assigned user looks at it in Outlook, he/she will see the changes. But the originator never receives a message
with the changes.
Am I missing something or is this by design? Thank you in advance for any assistance.

Anyone?

Find my iphone - picture has changed from a black ipod to a white one

My son's black ipod touch has gone missing, and we've tracked it using Find My Iphone to a house 15 miles away.
Strangely, the picture of the ipod has changed from a black ipod touch to a white one.
Is there something that the person who has "found" the ipod can do to affect this, or is it possible that the tracking has gone awry?
Any help would be appreciated.
Cheers
jb

I noticed the same thing on mine. The Apple Store Genius informed me that after the white iPod touch came out, they began using that as the stock photo. If you asked Apple to check their records for devices registered to you, it would show up as the proper color - black.

Why do I get the spinning beach ball when I try to change from Events to Photos. How do I fix it?

Why do I get the spinning beach ball when I try to change from Events to Photos. How do I fix it?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

'CHANGE' event not triggering for BTE 2214 on park/change from FBV1/FBV2

I have designed a workflow template for FI parking. If the parked document is rejected, i need to trigger FIPP 'CHANGE' event for sending workitem to approver when someone changes the parked document. In SWEL event trace, the 'CHANGE' event is not getting raised.
So i implemented a BTE 000002214 and now i am able to raise 'CHANGE' event and capture it in workflow. But this is only working when i park a document using FV50 transaction and later change it.
But when i park a document using FBV1 and then make changes from FBV2, the 'CHANGE' event is not being triggered in SWEL. Should i implement some other BTE like 2218 etc? Can you please help?

Hi Gokul,
You can try handling the SAVE event instead of the CHANGED event.
T-code FBV2 will not allow you to save the document unless you make some changes.
Try implementing BTE 2218 and revert.
Thanks,
Sreekanth

I need to change from Japan App Store to Australia App Store. I get this every time I try using My MacID: "This Apple ID is only valid for purchases in the Japanese iTunes Store. You will be switched to that Store." What next TY. JohnCahill

I moved from Japan to Australia. I need to change from Japan App Store to the Australian App Store. I get the following message every time I try using My MacID which was set up in Japan: "This Apple ID is only valid for purchases in the Japanese iTunes Store. You will be switched to that Store." At one point... by which path I do not remember... I was instructed to created a new ID. I fill out the new ID forms, but the address is rejected each time... quite confusing. Does it want a new name? But it says I cannot use an apple domain (tag?) even though I guess it has to be an apple address... ? So I have iTunes crdit cards purchansed in Australia, can't spend in AUstralian iTunes Store, get directed back to Japan each time, and can't open a new ID... What am I doing wrong? Thank you in advance. John. Australia.

You must have a separate Apple ID registered in the other store along with a valid bank-issued charge card in the other country, and a legal billing address in the other country.
Sorry... But... You cannot use other countries itunes stores.
You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country..
iTunes Store Terms of Service
http://www.apple.com/legal/itunes/us/terms.html#SERVICE

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this?

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Times of events change from mobile me to touch

Similar Messages

Maybe you are looking for