TIMESTAMP container element in ALRTCATDEF

I have tried to use with the below mentioned container elements from alrtcatdef but nothing was getting displayed in alerts
I need the timestamp container element in alrtcatdef to configure as longtext/shorttext, where it can carry the alert triggered timestamp
1. &TIMESTAMP&
2. &TIMESTAMPL&
3.&/ISCER/TIMESTAMP&
Thanks

Hi,
have a look into this document, you will get the answer.
http://sapdocs.info/wp-content/uploads/2009/01/alert-configuration-in-xi.pdf
Regards
Aashish Sinha

Similar Messages

BPM Alert Container Elements Not Filled

Hi All,
Another problem i am facing when i am raising alert from BPM.
In inbox i see alert message being raised but with no text.
I have also subscribed to email alerts.
In the email the subject is Process 000000008058
and the content is the first alphabet of the AlertMessage container element.
Ex : In BPM my container element is AlertMessage and the message assigned is Error . Then in email message i only get E. where as in alert inbox i get nothing.
ps : im using XI 7.0 SP 9. there are no notes which are applicable for this release.
Regards,
Rahul
Message was edited by:
Rahul Jain

Hi Bhavesh,
>When you select Dynamic text in the Alert category, the Container tab will no longer be available in ALRTCATDEF for your Alet Category.!
the container tab is available but the Long& Short text tab is disabled.
I did not mean that..
What i meant was see next to the Properties tab in Alert Category defination there is a Container tab where we define our own container elements.
Do i need to define the names there..or i can directly use in the BPM?
Regards,
Rahul
Message was edited by:
Rahul Jain

Alert inbox - Alert Categories - Container elements

Hi all,
I have configured alerts in alrtcatdef tcode. I am able to receive the alerts in the alert inbox. But the container elements are filled in. When tried with checking the Dynamic Text there is no long text in the alert received in the alert inbox.
We r on SP 17.
Did any one try this.
reg,

naveen
If u had typed the container elements then u may need to delete those and again insert thru the std option (an icon where you can fetch it). Also check the corresponding data type for the container element. If you are using a wrong data type, which is not valid for that container element, you might face problems.
Check Note : 947738 to solve this issue. Also check Troubleshooting Note specifically 913858.

Container element is not being displayed in email

Hi Experts,
I inserted an element from container into email text as below
The task has been pending in inbox for more than &ins_num& days.
The value of &ins_num& in container is 9
In output I get
The task has been pending in inbox for more than days.
Please let me know what is wrong. The binding works fine. No error in workflow.
Thanks.

Hi Miak,
Greetings..:-)
> I inserted an element from container into email text as below
> The task has been pending in inbox for more than &ins_num& days.
> The value of &ins_num& in container is 9
> In output I get
> The task has been pending in inbox for more than days.
> Please let me know what is wrong. The binding works fine. No error in workflow.
Check on the Following things:->
1> The Container Element has Initial Value defined, If Yes - it should symbolise in Green Colour.
If 'Not', then check the WF Log and see whether this Container Element is fetching the Values orr not.
2> If the Values are not being Fetched, then the Problem lies with the Binding of these WF Containers.
Let me know if you are still facing Issues.
Regards,
Kanika

XML DB: is it possible to get a row for each element in a container element?

I have an XML document containing a container element (collection). If I query, using an XPath expression, the contained elements I get a row for each container element with the contained element concatenated. Is it possible to get a row for each contained element?
I run this simple query:
select extract(xmltype('<colors><color>Red</color><color>Green</color></colors>')
, '/colors/color/text()').getstringval() from dual
And get this result:
EXTRACT(XMLTYPE('<COLORS><COLOR>RED</COLOR><COLOR>GREEN</COLOR></COLORS>'),'/COL
RedGreen
1 row selected.
What I would like to have is:
Red
Green
2 rows selected.
Wishful thinking or possible? Many thanks!

Sure. This is where our XMLSequence() function comes in. It allows you to treat the top-level nodes in a nodeset as if they were rows in a table when combined with the TABLE() operator. Here's an example.
First, to make the SQL look a little cleaner, I like to define a function like this:
create or replace function testdoc return xmltype as
begin
return xmltype('<colors><color>Red</color><color>Green</color></colors>');
end;.
To break out the nodeset of <color> elements as a table, we use the following query:
select value(list_of_color_elements).extract('*/text()').getStringVal() as color
from TABLE( XMLSequence( extract(testdoc(),'/colors/color'))) list_of_color_elements.
Or, using the new-in-9.2 extractValue() operator so we don't have to remember the text() part:
select extractValue( value(list_of_color_elements), '.') as color
from TABLE( XMLSequence( extract( testdoc() ,'/colors/color'))) list_of_color_elements.
Here the TABLE(XMLSequence(...)) combo produces a table of XMLType, with one XMLType object in each row of the table.
In general, if the XMLType instance were coming from an XMLType table xmltab the query would look like this:
select extractValue( value(colors), '.') as color
from xmltab x, /* Important that this table comes earlier in the FROM clause! */
TABLE( XMLSequence( extract( value(x),'/colors/color'))) colors.
And if the XMLType were instead in a column of XMLType named doc in a table xmltab, then we would have the syntax:
select extractValue( value(colors), '.') as color
from xmltab x, /* Important that this table comes earlier in the FROM clause! */
TABLE( XMLSequence( extract( x.doc ,'/colors/color'))) colorsOnce you get the hang of it, you'll see that the combination of TABLE(XMLSequence()) to "shred" XML nodes into rows, and XMLAgg() to aggregate fragments of XML across multiple rows back into a single document, is quite powerful.

Hiding a container element from a standard applicaition

hi,
i have a requirement to remove the UI elements in a transparent container from a view of a standard webdynpro component HRRCF_C_PREFERENCES_UI. This component is being used as a sub component in a main application.
The transparent container within has a drop down list and a few buttons.
So i created a component configuration for the component HRRCF_C_PREFERENCES_UI and changed the property of the UI element in the configuration to invisible. This worked, the container element was invisible in the application. But two other containers next to the UI element that was hidden did not move to the left . No proper alignment.
Is this the standard behavior of a component configuration? i don't think so.
Now in my option, the other only possible option is to hide the button by changing the attribute in the WDDOMODIFYVIEW method of the view.
Could someone please help me how to set the attribute problematically? Is there a different way to meet this requirement?
Need some help.Thanks.
Best Regards,
Sridharan

Hi,
Just go to enhancement mode in your webdynpro component and delete that button from UIElement hierarcy.
If you want your button back, delete the enhancement.
Regards
Vishal kapoor

Assigning a value to container element in rule defination

I am using a rule to determine an actual agent. I am using a function module containing actor_tab and ac_conatiner in TABLES parameter. the agent determined is appended to internal table actor_tab. I want this agent to be available in a container element(say: APPROVER) to use it further. I am trying to assingn the agent value to container element using macro swc_set_element ac_container 'APPROVER' agent-name. But its not working...any other way to assgn this agent to the container element. Bindings from workflow container to rule container are proper.
Edited by: Rishi Bhatia on Oct 19, 2008 2:46 PM

i think you cannot modify the container element from Rule.
the agents of the task determined by the Rule will be stored in some variable of the container automatically (i think it is RuleResult.Agents). you can check this yourself and then bind this element of the task to your APPROVER element.

BPM - An empty container element was specified when sending

Hello Experts,
My BPM process looks as below:
Receive -> Loop (execute if the status of IDoc is ERROR(E))--> Mapping ---> End Loop --> Send
The message is failing in BPM workflow with the log: An empty container element was specified when sending
Container for receive and send stepe are different. IP in SXI_CACHE has process code 0.
Mapping program is defined between the abstarct msg type of receive step and abstract msg type of Send step.
Th message being processed has initial status as ERROR and after the mapping step is exceuted, it retrieves teh current status i.e SUCCESS. This ends the loop step and while tying to send the messgae to target system, this error occurs.
Pls advice if I am missing anything.
Thanks,
Elizabeth.

Go to transaction SWWL , select your integration process instance and delete it
Create your process with a new name and run the scenario again
Re: Prob with Integration Process
regards
Ninad

Error while creating container Element in WF

Hi,
I have created a container element with field vbeln, and specified an initial value. Created mail step and activated it. I have given the mail subject and content as "value given : &vbeln&". When I try to test this I couldn't find the container element in " Input Data" tab of the Test Data and getting the message as "Contnr elem. VBELN is for read purposes only. No values are assigned to it."
Could anyone suggest me to correct this, because I am new to WF.
Thanks,
AA

Hi AA,
You would probably need to create more than one containers.
In workflows, we have following types of containers:
1. Workflow container
2. Task Container
3. Event Container
Now, since you need the element VBELN, try the following:
1. Create a WF container for VBELN. Make it as both input and output parameter.
2. Create a container for the Mail Step, again with VBELN field as an input parameter.
3. There would be a button for binding in the mailstep. Bind the Field VBELN from Work flow container to the Mail Step container.
Once binding is done, save it and Activate the Workflow.
Hope this helps.
Do get back in case of any issues.
Regards,
Sonal

The hard drive on my laptop that contained Elements just died. Can I get a second copy for installation on my new PC?

The hard drive on my laptop that contained Elements just died. Can I get a second copy for installation on my new PC?

The iPhone is not a backup device.
Restore the iTunes library from the backup that should be kept of your media and other important files.
Syncing the iPhone to a new library (in this case, it will be a new library unless you have a complete backup of the iTunes folder pre-crash) will result in the media on the device being removed and replaced with content from the new library.
As for iOS5, we really do not know until Apple officially releases it.

Container Element in Alert Category

Hi,
Any one can tell me what is the use of container element in Alert Category.
While creating a container variable there is an drop down for Object type.When we go for each of these object type.
When i selected the object type as 'XML object type ' i could be able to see all the abstract interfaces and the fields that are created in the IR.I am able to select that field in the long text tab also.
But the value of the field is not getting reflected when an alert message is triggered.
Am I in a right track or doing anything wrong?Can i directly access this field in the long text?
Regards
Divia

Hi Sreedivia Narath,
Go through this blog for alert configuration by Michal. Its a beautiful blog and explains about the container variables:
The specified item was not found.
Thanks and Regards,
Sanjeev.

Container element in BPM of type integer

if i make a container element of type integer in my BPM, does it initiallize to some value

Hi Pankaj,
Check this out,
http://help.sap.com/saphelp_nw2004s/helpdata/en/78/62373f58502e48e10000000a114084/content.htm
Go to Assigning Values
At runtime, you can assign a value to a container element, for example to increase a counter or to append a message to a list of messages.
Also refer this
http://help.sap.com/saphelp_nw2004s/helpdata/en/59/e1283f2bbad036e10000000a114084/frameset.htm
[Reward if useful]
Regards,
Prateek

BPM error:Container element in step transformation is not initialized

Hello Experts,
I am new to the concept of BPM.
I'm trying to create an integration process in which I'm taking an Idoc and processing it in many ways. The process contains many transformation steps. There two such transformation steps which have been placed in block step in a fork. And i get this error: Container element XXX in step transformation is not initialized
What could be the problem?
Regards,
Akhil

Hi
if u are getting the messaga with red sigh then it means it will craete the error while running the scenario.
but if it is in blue then i think it will not create any error.
the meaning of that statement is that the container u have defind is not used anywhere. it is just giving u a warning message.
Thanks
Rinku

Error while using container element _WF_PARFOREACH_INDEX in workflow

Hi All,
I am using internal container element WFPARFOREACH_INDEX in internal table so that i can use it as index to read table row one by one..but in binding i am getting error "Container element '_WF_PARFOREACH_INDEX' does not exist" in form of an example.
Can someone tell me that how to get rid of this error in binding? I am using this element variable to achieve parallel branching in workflow.
Regards,
Sumit

Hi AA,
You would probably need to create more than one containers.
In workflows, we have following types of containers:
1. Workflow container
2. Task Container
3. Event Container
Now, since you need the element VBELN, try the following:
1. Create a WF container for VBELN. Make it as both input and output parameter.
2. Create a container for the Mail Step, again with VBELN field as an input parameter.
3. There would be a button for binding in the mailstep. Bind the Field VBELN from Work flow container to the Mail Step container.
Once binding is done, save it and Activate the Workflow.
Hope this helps.
Do get back in case of any issues.
Regards,
Sonal

BPM: How to return the total number of lines in Multiline Container Element

Hi all:
I am trying to follow the following blog to do message splitting:
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
In the blog, total number of messages for Message1 was returned to Count in Message 2.
If I do not want to create message 2, if there any way to return total number lines in multiline elements ? Because this number need to be used to specify in loop condition:
While Indxe != TotalNumberOfLines
Thanks
Liang

Hi, Matias:
For the loop block option, your answer is passing message count in different message type is best option !
I really do not know why SAP does not deliver a build-in function to return the number of items in multiline element at run time ?
Now the question for the second option: ForEach block:
When I leave current line of block properties empty, the compile does not pass
I have to input a another element (Var_Cur) in current line
Inside my block, I have one send step, it will send Var_Dest[Index], followed by a container operation step to increment Index by 1.
With above setup, I compile it, compile passed, but it says:
"Container Element Var_Cur in Step Block1 is initialized but not used"
then I added another containter operation step in block:
Var_Cur = Var_Dest[Index]
I modified send step to send Var_Cur rather than Var_Dest.
Up to now, I can compile it without any warnings.
But when I send message to IE, the message pass pipe line, but it seems does not pass the BPE.
When I go to SXI_CACHE, to check the return code for my Integration process is 0, means no error.
But my message does not reach my target system.
Where do you think I made wrong ?
Thanks
Liang

TIMESTAMP container element in ALRTCATDEF

Similar Messages

Maybe you are looking for