Timestamp error with IR 9.3 and CSV Files

Hi all, I'm new to this forum and getting used to all of the Hyperion functionalities. I'm trying to create a query that will give me the history of orders and for that I'm using CSV files as the source of information. I have date fields that when I select them returns me a formatting error: "12/18/2009 doesn't match date format: 1992-01-31 00:00:00". I assume that this is because the field format is recognized as Timestamp. Is there a way to change the field format from within Hyperion?
Appreciate your help!

How and where exactly did you make this modification? I moved from an old PC to a new one and my queries work great on my old PC but with my new one, I am getting this "doesn't match date format:" error. I didn't have to make any changes when I set things up on my old PC (at least not that I remember) and not sure what to do here. Any help would be greatly appreciated.

Similar Messages

  • Airport Utility `install failed' error with both 6.0 and 6.1

    Hi folks
    I am running Mac OS X Lion 10.7.4 (11E53) and cannot get the Airport Utility to run at all. [5.5.3] The application icon flickers as though it is about to launch and then nothing happens.
    I have tried other 5.x downloads and they all fail because I am running OS X Lion 10.7.4.
    Doing a standard Software Update or using a download of 6.x from the Apple Support site, the installer comes up with an `install failed' error with both 6.0 and 6.1, having gotten through the complete process and looking like they were `successful'.
    It's the only time in two years and many updates later that i have come across this issue, so I am unsure how to start to tackle it.
    Any ideas or suggestions please?
    Thanks in advance.

    Welcome to Apple Communities
    Backup your files and try this:
    1. Reboot from recovery partition (or as in my case USB recovery drive)
    2. Select Re-install Mac OS X
    3. Allow the process to run through multiple restarts
    4. When reinstall process is complete run software update (side note, my software update would not launch as long as my USB recovery stick was plugged in, weird)
    5. Run all updates saving the Airport Utility 6.0 until last.
    6. Install the airport utility from software update.

  • Error with Title i.d. and password in app builder

    Hi;
    Ive just subcribed to Pro edition DPS and am starting to build my viewer app, however im getting an error with Title i.d. and password in app builder
    It says niether the title id or password are valid, however they are the same as i've used to both log into app builder and to upload my folios to the folio producer.
    What am i missing here?
    Scott

    Yes, the account administration stuff is confusing when you jump from a "creative" account to a Pro account. As the Getting Started guide states, when you set up your Pro account, you should use dedicated Adobe IDs, such as [email protected] and [email protected], not [email protected] The Copy Folio command makes it easy to transfer folios from one account to another, especially if you do it on the same machine you used to create the folios. Everything moves over nicely.
    Again, don't use your "master" account for creating and publishing folios. Use it only for account administration.

  • How Can I Import Contacts from Excel (XLSX/XLS) and CSV file to VCF File?

    Hi Friends,
    I have stored my all official and personal contacts list in the Excel (XLSX/XLS) spreadsheet and CSV file from long time. But now, I want to move my all contacts in an MS outlook 2013 and also Samsung S4 Contacts directory. But for this process, I require to import all Excel and CSV file contacts into VCF file format. So that, I could export vCard (VCF) file in the outlook and Samsung S4 contacts book. But I don't know about this process that how to import Excel and CSV file contacts into vCard format. If anyone has best solution to import and export excel or CSV file contacts into VCF file, so please share with me that information.
    Thanks & Best Regards
    Jackson T.
    <Edited By Host>

    https://itunes.apple.com/gb/app/csv-to-vcard/id713295900?mt=12

  • How to Read the "text file and csv file" through powershell Scripts

    Hi All
    i need to add a multiple users in a particular Group through powershell Script how to read the text and CSV files in powershell
    am completly new to Powershell scripts any one pls respond ASAP.with step by step process pls
    Regards:
    Rajeshreddy.k

    Hi Rajeshreddy.k,
    To add multiple users to one group, I wouldn't use a .csv file since the only value you need from a list is the users to be added.
    To start create a list of users that should be added to the group, import this list in a variable called $users, the group distinguishedName in a variable called $Group and simply call the ActiveDirectory cmdlet Add-GroupMember.
    $Users = Get-Content -Path 'C:\ListOfUsernames.txt'
    $Group = 'CN=MyGroup,OU=MyOrg,DC=domain,DC=lcl'
    Add-ADGroupMember -Identity $Group -Members $Users

  • How can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?

    Hi,
    I would like to know as to how can I add links to open xml and csv files stored in another location? Please advice how to place links in my frame maker document?
    Kindly advice.
    Thanks
    Priya

    Special > Hypertext > Command "open document" will do its best to open the target document inside FrameMaker, which may not be much help; Special > Hypertext > Command "message …" will use the application you specify. The user guide for 7.0 says this about absolute links, and I don't think anything has changed since:
    For example, to start PaintBrush and open the Ship.pcx file on drive C you would use the command message system pbrush.exe C:/Ship.pcx
    I've not often used a relative link, and not recently: the same source says
    folder levels are separated by a slash / even in Windows and Mac
    [relative links] FrameMaker searches for a relative pathname beginning in the folder that contains the current document
    [absolute links] FrameMaker searches for an absolute pathname beginning at the top of the file system. In Windows, the absolute pathname begins with the drive specifier, a colon and a slash.

  • Adobe story does not export lines of dialogue that are amrked with (CONT'D) into a csv file.

    For some reason Adobe story does not export lines of dialogue that are marked with (CONT’D) into a csv file. The rest of the dialogue exports fine, bit the bits that are marked with (CONT’D) do not show up in the dialogue column !. Can this be changed with some settings or is this a bug? The script was imported from an FDX file. If anyone has a fix for this, please, let me know.
    Thenk you.

    Thanks for reporting this issue.
    This is indeed a bug.
    Just to get correct data in csv, a workaround for this issue could be to replace word 'CONT'D' with a place-holder word, perform an export-to-csv and then change it back.
    1. Press Ctrl+F in script to open Find/Replace
    2. Replace word 'CONT'D' with a placeholder word, say 'TEMPCONTD'
    3. Export the script to csv
    4. Now replace the placeholder word with 'CONT'D'

  • Ssrs 2008 export to excel and csv file

    In a ssrs 2008 report, the user will export data to PDF, excel, and CSV files. When the report is exported to excel or csv file, the user wants me to hide some tablixes. Thus can you show me code on how to export the reports to csv or excel file without
    and be able to hide a few tablixes?

    Hi jazz_dog,
    According to your description, you want to set the visibility for some tablixes based on the exporting file type. Right?
    In Reporting Services 2008, we don't have any parameter to get type of exporting file. So we can only create a parameter and select a type before exporting to a file. Then use conditional expression to control the visibility. It's definitely not a good workaround,
    so your goal can't be achieved in Reporting Services 2008. However, for Reporting Service 2008R2 or later version, we have a build-in parameter called Render Format Name, this parameter will display the type of exporting file automatically. So we can make
    the judgment in expression based on the value of this parameter.
    Reference:
    Built-in Globals and Users References (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Internal Server Error  when trying to upload and manage files

    The instructor was experiencing this difficulty on Tuesday 1/13, after the notice was closed. I just
    went into their site again(1/14/09 2:48pm), launched iTunes U and received the same error after clicking on 'Upload And Manage Files' in their iTunes U page.
    I was able to reproduce the same error on our iTunes U site.
    https://deimos.apple.com/WebObjects/Core.woa/EditFiles/indiana.edu

    I have only found two that work correctly. They were created the same way and permissions are the same. I don't know why one works over the other.
    /Indiana University/Project Sites/Oncourse Team - FAIL
    /Indiana University/Project Sites/SyllabusTest - Success
    /Indiana University/Project Sites/CHEN-TES 101 01 - FAIL
    /Indiana University/Project Sites/UITS Podcast Team - FAIL
    /Indiana University/Project Sites/ePortfolio Playgroun - FAIL
    /Indiana University/Project Sites/Testong - FAIL
    /Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
    /Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14431 - FAIL
    /Indiana University/SP08 Spring Semester/SP08 OC DEV C201 DEV2 - FAIL
    /Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14438 - FAIL
    /Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14552 - success
    /Indiana University/SP08 Spring Semester/SP08 IN UITS PRAC 14392 - FAIL

  • What type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI.  will this load onto ipad?

    what type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI.  will this load onto ipad?

    Per http://www.apple.com/ipad/specs/
    AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p
    AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p
    Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately)
    Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately)
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Run emigall with a "mig.object" and "input file" as parameters in a job?

    Hi!
    I'm looking for a way to run emigall with a "mig.object" and "input file" as parameters in a job. We will use emigall in a data load step of a process. Is this possible? Is emaigall designed for this use?
    Thanks for any help and suggestions.
    Best regards.

    Hi!
    I'm looking for a way to run emigall with a "mig.object" and "input file" as parameters in a job. We will use emigall in a data load step of a process. Is this possible? Is emaigall designed for this use?
    Thanks for any help and suggestions.
    Best regards.

  • Query Engine report error with Crystal Report 9 And MS SQL SErver 2000

    Hi,
    Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
    "Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
    Can any One check any pblm with this query
    ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14  
    BEGIN
    IF ISNULL(@intSchemeID,0) <> 0  
    BEGIN
    Select* From table
    END 
    ELSE IF ISNULL(@intSchemeID,0) = 0  
    BEGIN
    Select 
    END 
    END
    When I comment the above codes , report works fine....
    Can any one help me....plz....I m in such a critical situation...

    Hi,
    Currently I m doing a report with Crystal Report 9 and MS SQL as back End.I used a stored procedure to fetch data from DB.The Stored procedure works properly with query analyzer . But when I take report through application
    "Table Not Found" Error is coming.Later I Found that In stored procedure for certain conditions only this error comes.But I cant resolve it.
    Can any One check any pblm with this query
    ELSE IF ISNULL(@intSourceID,0) = 10 Or ISNULL(@intSourceID,0) = 11 Or ISNULL(@intSourceID,0) = 12 Or ISNULL(@intSourceID,0) = 13 Or ISNULL(@intSourceID,0) = 14  
    BEGIN
    IF ISNULL(@intSchemeID,0) <> 0  
    BEGIN
    Select* From table
    END 
    ELSE IF ISNULL(@intSchemeID,0) = 0  
    BEGIN
    Select 
    END 
    END
    When I comment the above codes , report works fine....
    Can any one help me....plz....I m in such a critical situation...
    Refer the above statement highlighted in BOLD. That statement is WRONG. Select what ???? Try any one of the below statement,
    select ''
    --or
    select 0
    --or
    select null
    Regards, RSingh

  • Initial Print jobs 'communication error with device'. Pause and restart job

    So, I have an odd variant of the Leopard print problem; on 3 separate systems.
    When I print to an HP Photosmart C7180, which setup fine, which I can scan to fine, the print job throws an error :error communicating with device, switch on and off' and so forth. It does that from any app, and consistently. I am printing via bonjour, the printer is networked, but on a static IP.
    To fix this EVERY-TIME I PAUSE printer, then start printer again. It immediately starts working, consistently until I sleep, log out, or don't print for a while.
    This seems to be some timeout issue or such. I tried IP printing, but no difference.
    Resetting the print system also did not help.
    It's not catastrophic but sooo annoying. Any input appreciated!
    Thx,
    Dan

    Hello SunnygirlQ. Welcome to the Apple Discussions!
    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
    To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
    If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help:
    o Printer troubleshooting for AirPort Extreme and AirPort Express
    I assume that this printer works just fine when it is connected directly to your Mac ... correct? If so, has it worked when connected to the AX in the past ... or has it always had this problem? If it did work correctly before, did you do any updates, especially to the AX, recently?

  • "empty file" error with CS5, linux server and mavericks

    hello to the community,
    i'm the owner of a small online marketing agency.
    we have been using different macs here since 10.6. until mavericks with adobe CS 5 and a linux server for years.
    today i got a new MBP retina with mavericks and since now i have the following problem:
    - when i try to open a photoshop file on the server i get a "file is empty" error, when i open an illustrator file on the server illustrator crashes und when i open a pdf on the server with acrobat pro there comes a message that the file is corrupt. with acrobat reader i can open it.
    - i can open the exact files with all apps when they are on a local storage not an the server
    - i can open all files on the server with another mac with os x 10.6.
    so there must be a problem with the combination cs5-files, server and os 10.9. it's weird because with my old MBP i with also using mavericks and there was no problem.
    can anyone help me? it's really a problem!

    i found a workaround that seems to work!
    instead of connecting to the server with "smb" i connect with "cifs". so i force mavericks to connect using the old smb 1 instead of the buggy smb 2.

  • Compile errors with Solaris 5.8 and Studio 11 with latest patches

    I asked sa to patch my studio 11, and they applied patches 121023-04, 121015-04, 121017-08, 122142-03, 120761-03, 120760-11 and 122135-02. Then, I compiled my boost_1_33_1 again. It built some, but not all libraries. It stil spit out the following errors. Is this expected?
    "/home/vcheng/boost_1_33_1/libs/filesystem/build/../src/operations_posix_windows.cpp", line 126: Error: readdir_r is not a member of file level.
    ...failed sunpro-C++-action build_sunos/bin/boost/libs/filesystem/build/libboost_filesystem.a/sunpro/debug/operations_posix_windows.o...
    sunpro-C++-action build_sunos/bin/boost/libs/wave/build/libboost_wave.a/sunpro/debug/instantiate_cpp_exprgrammar.o
    "/home/vcheng/boost_1_33_1/boost/spirit/core/composite/epsilon.hpp", line 76: Error: complex expression not allowed in dependent template argument expression.
    "/home/vcheng/boost_1_33_1/boost/iostreams/device/file_descriptor.hpp", line 79: Warning: close_on_exit hides boost::iostreams::file_descriptor::impl::close_on_exit.
    1 Warning(s) detected.
    "/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 42: Error: BZ_CONFIG_ERROR is not defined.
    "/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 106: Error: The function "BZ2_bzCompressEnd" must have a prototype.
    "/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 107: Error: The function "BZ2_bzDecompressEnd" must have a prototype.
    "/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 113: Error: The function "BZ2_bzCompress" must have a prototype.
    "/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 118: Error: The function "BZ2_bzDecompress" must have a prototype.
    "/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 143: Error: The function "BZ2_bzCompressInit" must have a prototype.
    "/home/vcheng/boost_1_33_1/libs/iostreams/build/../src/bzip2.cpp", line 147: Error: The function "BZ2_bzDecompressInit" must have a prototype.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 97: Warning: args hides boost::program_options::detail::cmdline::args.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 100: Warning: args hides boost::program_options::detail::cmdline::args.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 110: Warning: args hides boost::program_options::detail::cmdline::args.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 349: Warning: args hides boost::program_options::detail::cmdline::args.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 383: Warning: args hides boost::program_options::detail::cmdline::args.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 437: Warning: args hides boost::program_options::detail::cmdline::args.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 458: Warning: args hides boost::program_options::detail::cmdline::args.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 477: Warning: args hides boost::program_options::detail::cmdline::args.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/cmdline.cpp", line 495: Warning: args hides boost::program_options::detail::cmdline::args.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/config_file.cpp", line 35: Warning: allowed_options hides boost::program_options::detail::common_config_file_iterator::allowed_options.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 311: Error: Could not find a match for std::count<std::InputIterator, std::T, std::Size>(char*, char*, char) needed in::format_paragraph(std::ostream &, std::string, unsigned, unsigned).
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 378: Error: Too few arguments for template std::reverse_iterator.
    "/.automount/opt/Forte/sunstudio11_patch1/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 432: Error: "friend" declaration is incompatible with function template.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 378: Where: While specializing "std::reverse_iterator<const char*>".
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 378: Where: Specialized in non-template code.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 379: Error: Too few arguments for template std::reverse_iterator.
    "/home/vcheng/boost_1_33_1/libs/program_options/build/../src/options_description.cpp", line 387: Error: Could not find a match for std::distance<std::ForwardIterator, std::Distance>(const char*, const char*) needed in::format_paragraph(std::ostream &, std::string, unsigned, unsigned).

    You can take Boost 1.34 but you have to use CVS and you have to modify Boost configuration files to use -library=stlport4 option.
    Or you can take Boost 1.32, read this article http://blogs.sun.com/roller/page/sga?entry=boost_mini_howto and apply this patch http://blogs.sun.com/roller/resources/sga/boost_1_32_0.patch.
    As you can see here http://engineering.meta-comm.com/boost-regression/CVS-RC_1_34_0/developer/summary.html Sun C++ is in a good shape.

Maybe you are looking for