Timestamp Service Analysis

Hi,
I am looking to utilize the timestamp service analysis in CRM to analyze the service performance of an organisation through BI.
Is there any document out there that talks about how to use the timestamp service, how to configure it etc.? I could not find any thing on SDN or the net in general.
Same goes for Document processing lifecycle.
Any help on these would be appreciated.
Thanks & regards,
Nikhil

Currently i am also exploring same.
With limited help available ( SPRO documentation) with configuration Document processing life cycle i am able to configure. i am able to extract data for datasource 0CRM_TSS_DTRACK.
Stuck with performance key figure for Time stamp analysis. not able to extract data for 0CRM_TSS_PKYF and configuration settings.
If anyone got details / documentation please reply.
Thanks & Regards,
Dilip

Similar Messages

Timestamp Service analysis (BI 7 & CRM 2007)

Hi,
I am looking to utilize the timestamp service analysis in CRM to analyze the service performance of an organisation through BI.
Is there any document out there that talks about how to use the timestamp service, how to configure it etc.? I could not find any thing on SDN or the net in general.
Same goes for Document processing lifecycle analysis.
Any help on these would be appreciated.
Thanks & regards,
Nikhil

Currently i am also exploring same.
With limited help available ( SPRO documentation) with configuration Document processing life cycle i am able to configure. i am able to extract data for datasource 0CRM_TSS_DTRACK.
Stuck with performance key figure for Time stamp analysis. not able to extract data for 0CRM_TSS_PKYF and configuration settings.
If anyone got details / documentation please reply.
Thanks & Regards,
Dilip

Error while Configuring - Delivery Service Analysis

Hi All,
I am configuring Delivery Service Analysis - B33.
I was activating the business content: infocubes
And I got the following error
Message Text
The DataSource 0RF_ARTHIER_ACT does not exist in version A
Technical Data
Message type__________ E (Error)
Message class_________ R8 (Messages from the meta data generation)
Message number________ 404
Message variable 1____ 0RF_ARTHIER_ACT
Message variable 2____ A
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______ 1 (Level of detail 1)
Problem class_________ 1 (very important)
Sort criterion________
Number________________ 1
Pls. let me know how to resolve this error.
I am doing all the SD infocubes installation here
(Can I apply the solution mentioned in SAP Note Number: 953612?)
Thanks In Advance
Message was edited by: PPMM
 PPMM

Hi Siggi,
Thanks I found the DS and activated it.
But Activating the Data Source also gave errors
@5C\QError@ Extract structure /BI0/ARF_DS0100 is not active @5F\QNo long text exists@
@5C\QError@ /BI0/ARF_DS0100: Only tables and views are permitted for extraction @5F\QNo long text exists@
@5C\QError@ The extract structure /BI0/ARF_DS0100 of the DataSource 0RF_ARTHIER_ACT is invalid @35\QLong text exists@
The extract structure /BI0/ARF_DS0100 of the DataSource 0RF_ARTHIER_ACT is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view.
Pls. help
Thanks In Advance

Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

Hi,
We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.
Any help is much appreciated.
Thanks

Hello,
The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
Sean Gallardy | Blog |
Twitter

MS SQL database needs to run mdx query to analysis services to retrieve data from a BPC 10 Netweaver cube(view only)

We are in the process of migrating from BPC7 SP12 Microsoft sql server to BPC10 netweaver on a sql server with BW7.4 and need to integrate our home grown data warehouse which is on a Microsoft sql server. The data warehouse currently connects to BPC7 using integration services/analysis services and runs mdx queries to analysis services to retrieve data from the BPC7 cube (view only). Please provide documentation on how to create this same integration with our data warehouse using BPC10 netweaver on a sql server.

When you were setting up your ODBC data source for
the Text driver, did you click on the "Options"
button? There's a lot of options in there that I
didn't understand at first glance.Yes I clicked on the options button, but the only thing there is dealing with file extensions. I left it set to the default.
I have since tried closing my connection after I insert a record, I then try executeQuery, but still no luck. Seems strange that I can write to the file but not read from it. If any thing I'd expect the opposite problem.
I have also tried using the class "JoltReport" from the sun tutorial instead of my own with the same result.
Message was edited by:
Hentay

Cluster resource 'Analysis Services' of type 'Generic Service' in clustered role 'SQL Server' failed.

Windows Server 2012 R2
SQL Server 2012
After a recent cluster failover from node 1 to node 2, the Analysis Services role is in a failed state, with the service stopped. When attempting to start the service, there are two error messages captured in Failover Cluster Manager:
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 4/10/2014 11:48:49 AM
Event ID: 1042
Task Category: Generic Service Resource
Level: Error
Keywords:
User: SYSTEM
Computer: HQ-HASQL-1.sbgnet.int
Description:
Generic service 'Analysis Services (HASQL)' failed with error '1067'. Please examine the application event log.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
 <EventID>1042</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>16</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8000000000000000</Keywords>
 <TimeCreated SystemTime="2014-04-10T15:48:49.752168200Z" />
 <EventRecordID>26212</EventRecordID>
 <Correlation />
 <Execution ProcessID="9036" ThreadID="14748" />
 <Channel>System</Channel>
 <Computer>HQ-HASQL-1.sbgnet.int</Computer>
 <Security UserID="S-1-5-18" />
</System>
<EventData>
 <Data Name="ResourceName">Analysis Services (HASQL)</Data>
 <Data Name="Status">1067</Data>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-FailoverClustering
Date: 4/10/2014 11:48:49 AM
Event ID: 1069
Task Category: Resource Control Manager
Level: Error
Keywords:
User: SYSTEM
Computer: HQ-HASQL-1.sbgnet.int
Description:
Cluster resource 'Analysis Services (HASQL)' of type 'Generic Service' in clustered role 'SQL Server (HASQL)' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-FailoverClustering" Guid="{BAF908EA-3421-4CA9-9B84-6689B8C6F85F}" />
 <EventID>1069</EventID>
 <Version>1</Version>
 <Level>2</Level>
 <Task>3</Task>
 <Opcode>0</Opcode>
 <Keywords>0x8000000000000000</Keywords>
 <TimeCreated SystemTime="2014-04-10T15:48:49.752168200Z" />
 <EventRecordID>26213</EventRecordID>
 <Correlation />
 <Execution ProcessID="6464" ThreadID="9076" />
 <Channel>System</Channel>
 <Computer>HQ-HASQL-1.sbgnet.int</Computer>
 <Security UserID="S-1-5-18" />
</System>
<EventData>
 <Data Name="ResourceName">Analysis Services (HASQL)</Data>
 <Data Name="ResourceGroup">SQL Server (HASQL)</Data>
 <Data Name="ResTypeDll">Generic Service</Data>
</EventData>
</Event>
With just these generic error messages being present, this has been difficult to diagnose. Some research has yielded possible resolutions of the Event Viewer log being full, .NET corruption, missing registry entries, but none of those seem to be the issue
(Event Viewer logs cleared, Analysis services is working on the same physical servers in a different cluster, and the registry entries was only a supported issue for SQL Server 2008 and 2008 R2).
Any help would be greatly appreciated.

Bring up Configuration Manager, look at binary path for SSAS. Make sure BOTH folders exist. Sometimes with failovers mappings get screwed up.

What's my password....Power BI Analysis Services Connector Deep Dive

Here are three screen shots:
SSMS:
PowerBI connected:
What's my password?

Hi Greg,
According to your description, you want to know the what you need to put when logging on to SSAS. Right?
In Analysis Services, Analysis Services provides a role-based authorization model that grants access to operations, objects, and data. All users who access an Analysis Services instance or database must do so within the context of a role. And the membership
of roles should be assigned to windows use (windows authentication).
In this scenario, you need to put in the windows user password. It's not supported to connect via SSAS without password.
Reference:
Roles and Permissions (Analysis Services)
If you have any question, please feel free to ask.
Best Regsards,
Simon Hou
TechNet Community Support

Failure on clean install of Service Manager 2012 R2 Data Warehouse installation - Error about "AssignSdkAccountAsSsrsPublisher"

I'm installing the Data Warehouse component on a new server (Server 2008 R2 SP1 with SQL 2012 SP1 CU6). Reporting service, analysis services and full text services are installed. I'm installing under an account that has DBO rights to the instance.
All pre-reqs pass. The installation gets to the very end of the installation and i get the following error:
An error occurred while executing a custom action:_AssignSdkAccountAsSsrsPublisher
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the Original state of the system. Once the correction are made, you can retry upgrade for this role.
I look in the setup logs and only see the following reference to "AssignSdkAccountAsSsrsPublisher"
MSI (s) (1C:00) [15:09:51:914]: NOTE: custom action _AssignSdkAccountAsSsrsPublisher unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _AssignSdkAccountAsSsrsPublisher returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Originally, I had some issues with services not being started during the install because some accounts didn't have "logon as a service" rights, but those have all been rectified. Not sure if something is leftover from that, or maybe CU6 wasn't
tested with SM R2 and i need to go back to an earlier CU?

That worked for me too. By manually removing all the folders from SSRS, then retrying the install, allowed it to proceed and complete successfully the second time around.
The first time installing SCSM 2012 R2, I got hit with
this error, which is why SSRS wasn't in a clean state. Make sure to launch setup.exe elevated as an admin!

Things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services

Do any one have a link to a list of things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services, Analysis Services and Integration Services?
I am taking from an Active Directory domain several servers with SQL 2008 and Reporting Services, Analysis Services and Integration Services. The server will stay on its own without association to any domain, the server will keep its IP address and
the server will not change names.
I have done some research and I got the basic steps including, removing the user accounts from the domain, changing the services accounts, changing jobs and databases from being owned by users from the domain. But...
Are there other things in Reporting Services, Analysis Services and Integration Services internal databases that have an association with the domain AND that will fail after no longer being in the domain?
I've heard of Reporting Services subscriptions failing when the domain user account is no longer there...Are there any other got ya's that any one has encountered?
Please advice.
Note: I am posting in this forum basically because of what I heard on Reporting Services, but it may be a better idea to post into a more broad forum such as SQL Server Migration section.
Thanks beforehand
Paulino

Do any one have a link to a list of things to consider when removing from AD domain a SQL Server 2008 which includes Reporting Services, Analysis Services and Integration Services?
I am taking from an Active Directory domain several servers with SQL 2008 and Reporting Services, Analysis Services and Integration Services. The server will stay on its own without association to any domain, the server will keep its IP address and
the server will not change names.
I have done some research and I got the basic steps including, removing the user accounts from the domain, changing the services accounts, changing jobs and databases from being owned by users from the domain. But...
Are there other things in Reporting Services, Analysis Services and Integration Services internal databases that have an association with the domain AND that will fail after no longer being in the domain?
I've heard of Reporting Services subscriptions failing when the domain user account is no longer there...Are there any other got ya's that any one has encountered?
Please advice.
Note: I am posting in this forum basically because of what I heard on Reporting Services, but it may be a better idea to post into a more broad forum such as SQL Server Migration section.
Thanks beforehand
Paulino

Calling Enterprise Services through xMII Web Service action block

Hi All,
I'm calling some Enterprise Service through xMII Web Service action block.
After providing URL and user credentials, I'm getting error "SOAP Service could not be loaded: The element type 'p' must be terminated by the matching end-tag ''."
Can anyone point out what might be the reason ?
Thanks,
Sumit

If you haven't already, try using the browser from the xMII server machine rather than your own (client).
The error that you recieve usually means that instead of a WSDL an HTML is being returned when you use the WebService action block.
Possible reasons - as Jeremy pointed out - improper credentials or some error with the webservice itself.
Another thing you can possibly try out - use some web service analyser to access the webservice . There's one that goes by the name StrikeIron which is a freeware.Pretty neat tool.

Reports For Service desk

Hi experts,
              I would like to know the different kind of report that i can use for service desk reporting .I have used service analysis report directly from the solution_manager transaction,
but was not able to execute it properly,
       regrads,
              Varghese

Hi Varghese,
At the moment, I am using only CRM_DNO_MONITOR.
However, I do hear abot BI reports being possible; I raised a query too, but didn't get a reply.
If you have the time you may like to explore the thread referred in my query [thread|BI Reports for Service Desk - any pointers, insights, experience please!;.
Regards,
Srini

CRM document - how to get status duration?

Dear all,
I extract data CRM -> BI using standard datasources: 0CRM_SRV_PROCESS_H, 0CRM_COMPLAINTS_I, etc
I need build a report with status duration of documents
For example, if document was processed 4 days in statuses OPEN > IN PROCESS > VALIDATION > CLOSED report should be following:
OPEN - 1 day
IN PROCESS - 2 days
VALIDATION - 1 day
Each CRM datasource has start date and last change date of the document
But there is no fields which stores date or duration of intermediate status change
Could you please give an advice - how to get status duration?
Thanks in advance

Hi Oleg,
Please check whether following standard datasources could meet your requirements:
0CRM_TSS_DTRACK CRM Tracking of Document Processing Lifecycles
0CRM_TSS_PKYF       Timestamp Service: Performance Key Figures
You can find the documents in transaction code SBIW, through IMG path
   Settings for Application-Specific DataSources (CRM)
       -> Settings for Extracting CRM Objects
             -> Define Extraction to Track the Document Processing Life Cycle
              -> Define Performance Key Figures for Time Stamp Service Analysis
Best Regards,
York

Kerberos Authentication between Sharepoint 2013 Foundation - SSRS 2012 - Oracle 11g failing with ORA-12638: Credential retrieval failed

I have set up SharePoint 2013 Foundation, SharePoint Reporting Services and SQL Server 2012 in a single server. I then created a Data Connection to Oracle 11g. Upon testing the connection, it throws the error “ORA-12638: Credential retrieval failed”.
Given below are the steps of installation and configuration.
Installation till basic authentication:
The installation has been done in a
single server.
Installed SQL Server 2012 (Developer version).
Selected only the following features:
Database Engine Services
Analysis Services
Reporting Services – SharePoint
Reporting Services Add-in for SharePoint Products
Management Tools – Basic
- Management Tools - Complete
2. Installed SQL Server 2012 SP1.
3. Installed SQL Server 2012 SP2.
  4. Installed SharePoint Foundation 2013.
5. Created web application (without Kerberos; we did not even create the SPNs).
      The application pool has been configured to use Reporting Services account since it is a single server installation. This account has been registered as a managed
account.
6. Created Site Collection.
7. Verified that Reporting Services is not installed.
8. Installed SharePoint Reporting Services from SharePoint 2013 Management Shell.
9. Verified that Reporting Services is installed.
10. Created a new SQL Server Reporting Services Service Application and associated the Web Application to the new SQL server Reporting Services Service Application.
11. Verified that SQL Server Reporting Services Service Application and its proxy have started. Reset IIS.
12. Created a Site.
  13. Created a Data Connection library with “Report Data Source” content type.
14. Created a Report Model library with “Report Builder Model” content type.
15. Created a Report library with “Report Builder Report” content type.
16. Uploaded an SMDL to the Report Model library.
  17. Added the top level site to Local Intranet instead of as a Trusted Site in the browser settings.
  18. Able to create and save a report using Report Builder.
Hence, basic authentication is working and SSRS is able to connect to Oracle database.
Next we have to configure Kerberos settings between SharePoint and SQL Server.
Implementation of Kerberos authentication
In the Report Server machine, opened the file C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config and added the Authentication Types of RSWindowsNegotiate
and RSWindowsKerberos.
2. Set up the following SPNs.
               a) SQL Server Database Engine service (sqlDbSrv2):
                setspn -S MSSQLSvc/CER1110:1433 CERDEMO\sqlDbSrv2
                setspn -S MSSQLSvc/CER1110.cer.demo.com:1433 CERDEMO\sqlDbSrv2
             In the Delegation tab of the account, selected "Trust this user for delegation to any service (Kerberos only)".
b) Account: SharePoint Setup Admin account (spAdmin2)
     setspn -S HTTP/CER1110:9999 CERDEMO\spAdmin2
                setspn -S HTTP/CER1110.cer.demo.com:9999 CERDEMO\spAdmin2
                In the Delegation tab of the account, selected "Trust this user for delegation to any  service
(Kerberos only)".
c) Account: SQL Server Reporting Service account (sqlRepSrv2)
                   setspn -S HTTP/CER1110 CERDEMO\sqlRepSrv2
                   setspn -S HTTP/CER1110.cer.demo.com CERDEMO\sqlRepSrv2
                   In the Delegation tab of the account, selected "Trust this user for delegation to any service
(Kerberos only)".
3. Configure the Web Application to use “Negotiate (Kerberos)”.
4. Logged in as SharePoint Administrator to the SharePoint server and opened the top level site in the IE browser.
     The Event Viewer logged the login process for the SharePoint Administration account as
Negotiate and not Kerberos.
5. Implemented Kerberos for Oracle database and client.
     Able to connect to the Oracle database via Kerberos authentication using SQL Plus.
6. Turn on Windows Firewall.
7. While testing the site's data connection using Kerberos settings, got the error
“Can not convert claims identity to windows token. This may be due to user not logging in using windows credentials.”
      Note: The Data Connection for basic authentication still worked.
8. Created a Claims to Windows Token Service account (spC2WTS2).
9. Started the Claims to Windows Token Service.
10. Registered the Claims to Windows Token Service account as a Managed Account.
11. Changed the Claims To Windows Token Service to use the above managed account.
12. Verified that the Claims to Windows Token Service account (spC2WTS2) is automatically added to the WSS_WPG local group on the SharePoint box.
      Note: The Reporting Services service account is also a part of the WSS_WPG local group.
13. Added the Claims to Windows Token Service account (spC2WTS2) to the Local Admin Group on the machine having the SharePoint App Server.
14. In the SharePoint box, added the Claims to Windows Token Service account (spC2WTS2) in the Act as part of the operating system policy right.
15. The Claims to Windows Token Service account (spC2WTS2) has the WSS_WPG group configured.
      When the C2WTS service was configured to use the managed account Claims to Windows Token Service account (spC2WTS2) earlier, the spC2WTS2 account was automatically
added to the WSS_WPG local group on the SharePoint box. The WSS_WPG group in turn is configured in c2wtshost.exe.config file.
16. Verified that the Reporting Services account is a managed account and part of the WSS_WPG group.
17. Earlier Service Application Pool - SQL Server Reporting Services App Pool service was associated with the SharePoint Admin account.
      Changed this to associate the Reporting Service account with the Service Application Pool - SQL Server Reporting Services App Pool service.
18. Changed the delegation of the Reporting Service account to constrained delegation with Protocol Transitioning. This is because we are transitioning from one authentication scheme (Claims) to another (Windows Token).
      For this, the delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use
any authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
      Note: The Reporting Service account already had an HTTP SPN.
19. Next, the goal was to make the Claims To Windows Token Service account match the Reporting Service account.
       For this, we created a fake SPN for the Claims To Windows Token Service account since the delegation tab was missing.
       The delegation has been changed to "Trust this user for delegation to specified services only". Also, selected the sub radio button "Use any
authentication protocol". Selected the Oracle Kerberos service as the service to which this account can present delegated credentials.
20. Restarted the SharePoint server.
21. Tested the data connection with the Kerberos settings again.
       Got the error
“ORA-12638: Credential retrieval failed”.
Can anyone tell me what is wrong with this setup?

http://www.freeoraclehelp.com/2011/10/kerberos-authentication-for-oracle.html
Problem4: ORA-12638: Credential retrieval failed
Solution: Make sure that SQLNET.KERBEROS5_CC_NAME is set in sqlnet.ora and okinit has been run before attempting to connect to the database.
Do check
http://webcache.googleusercontent.com/search?q=cache:5a2Pf3FH7vkJ:externaltable.blogspot.com/2012/06/kerberos-authentication-and-proxy-users.html+&cd=5&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/

Short dump error report

What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?

hi please look through this:
Whenever any transaction or any process is executed it hits an ABAP code.
If there is any issue in executing the code the situation is called "ABAP DUMP" or 'Short Dump'
Transaction ST22 is used to check any ABAP Dump within a given duration.
U can also fix the issue with the help of ABAP editor (Transaction Code SE38) if u r good with ABAP.
you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
sap-basis sap-basisAll Groups Ignore this text box. It is used to detect spammers.If you enter anything into this text box, no search results will be displayed.
SAP Groups > Technical-functional > sap-basis > Message
About This Group | Invite peers to join this group
<< Prev thread < Prev msg Next msg > Next thread >>
short dump----urgent
Reply from Keith Lewis on 5/2/2003 3:22:00 AM
Good explanation Joy, but it is not only limited to the current day and
yesterday. If you click on the Selection button you can select previous
days as well. In fact you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
Cheers
Keith
SAP R/3 Support Specialist
Information Services International
Tel +44 1664 41 6178 Mobile +44 7887 627818
E-mail email@removed
Archive Page - http://www.ittoolbox.com//I/sap-r3-basis.asp
Dear sreenivas
If you receive an error message in the R/3 System log (SM21), or if you
see
a terminated update in the update service analysis transaction (SM13), or
DB
realated error ,check for dumps using the dump analysis transaction
(transaction ST22), or choose Tools -> Administration -> Monitoring ->
Dump
analysis.
Transaction ST22 enables you to analyze short dumps from the current and
previous day.
The dump analysis function shows you:
What happened
What you can do
How to correct the error
The dump analysis function also provides an error ID and keywords that you
can use to search in SAPNet, as well as information about:
The system environment
Users and transactions
Transaction ST22 enables you to analyze the following data:
Date, time, user, client
Contents of system and data fields
Contents of internal tables and application tables
ST22 is a very nice feature in SAP. This is where all the system errors
and users mistakes showed up. If there is a problem that you cannot
solve and you contact SAP support, they look at this area to analyze it.
This gives us lead where to handle the problems.
Error analysis
How to correct the error
System environment
User, transaction...
Information on where termination occurred
Contents of system fields
Chosen variables
Active calls / events
Internal notes
Active calls in SAP kernel
List of ABAP programs affected
List of internal tables
Directory of application tables (contents)
Directory of data areas (administration information)
Directory of data areas (contents)
ABAP control blocks CONT
End of runtime analysis
i think this would be helpful
regards
sravani

SQL Server 2008 R2 - Adding Replication Components to an Existing Installation

Hi All
I have a SQL Server 2008 R2 instance that I need to install Replication components on.
I've been going through the appropriate wizard and selecting to upgrade an existing instance, the wizard recognizes the SQL Server that we have installed so that one is selected. On the next screen, I'd expect to see the feature selector with everything
we currently have installed selected and greyed out, however nothing is selected (except for BOL).
So in order to select Replication Components, I'd have to also select Database Engine, suggesting that a new SQL Instance would be installed. Not wanting to do this, I'm having to abort.
I've tried a number of different ISOs now (one I found lying around on the server), but I haven't had any luck. My only option now seems to be to recreate the instance entirely, but that being a last resort, I was wondering if anyone may have had some experience
with this problem?
I am running the installer with the highest level of Windows and SQL access, if that helps.
Thank you

Just to confirm when you try to install you select the option "Add features to an existing Instance of SQL" and below you see the instance name and you *Dont* see replication.
Now when you click next in the feature selection page you see replication as greyed out is that correct?
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com
To confirm, the steps I'm taking are as follows:
Once all the Setup Support files have been installed, and the Setup Support rules have been checked (with no errors)
- At the Installation Type screen I select Add features to an existing instance of SQL Server 2008 R2. My server appears in the drop down as the only instance on this server. I see the list of installed instances too, and can confirm that Replication does
not appear in the Features column. I click next.
- At the Feature selection screen, the only items that are selected are Books Online, SQL Client Connectivity and Microsoft Sync Framework. No other features are selected and greyed out, where I would expect Database Engine Services, Analysis Services and
Reporting Services (among others) to be selected. Selecting SQL Server Replication at this stage results in Database Engine Services also being ticked, suggesting the wizard will add a new instance on this machine.
The only peculiarity that I've noticed is with the version number reported on the Installation Type screen, which shows 10.51.2500. Not the same as the version that is reported if I inspect object browser or I user the @@Version command. In fact, I believe
this version relates to MDS instead? This being said, our other production server reports the same version here, and I was able to install replication components here with no problem.
I hope this helps, I don't know if I can attach some images to my post to make it more clear? It's quite a difficult and unusual problem to explain!

Timestamp Service Analysis

Similar Messages

Maybe you are looking for