TimeSync Not working - Second post - eager for help..

Configured the "Use a Network Time Server" in the Date & Time of the Control Panel. In the "Server Options" we have specified the iBook to use the Novell server's ip address for the timeserver. If you click "Set Time Now" it correctly gets and sets the time.
If left with the incorrect time for 3 days it does not automatically correct itself. Have tried all three Update the time options (auto and every12).
Does anyone know why this would happen? If not, do you know of a way to force the user login to run a "Set Time Now" equivalent?
Really appreciate help - don't want to replace the batteries on 200 iBooks (they are getting pretty old).

From the "Setting the Date and Time" page in Mac [OS 9.2.2] Help:
"You can select one of the network time servers provided by Apple, or you can use a public time server."
"The University of Delaware hosts a World Wide Web site that lists Network Time Protocol (NTP) public time servers."
Time Synchronization Server
http://www.eecis.udel.edu/~ntp/
I know nothing more about this than I can read above, but it sounds to me as though there's a specific protocol used by the servers that Date & Time is able to use to synch a Mac's clock with a network time server. Your Novell server may not provide the time via that protocol, so it isn't understood by your Macs. Have you considered just using one of Apple's servers for the time? Failing that, try one of the other public NTP servers.

Similar Messages

  • HT201365 hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me

    hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]

    First, we're not Apple here (Apple does not participate in this forum).  We're only users like you.
    The previous owner has not given you the correct ID and password for you to use.
    If the iphone has iOS version 7, then read through the following...
    http://support.apple.com/kb/HT5818

  • Hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade

    hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
    iPhone 4S

    oenkz33 wrote:
    this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
    Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks.

  • I am running Office 2013.  Trying to sync my reminders with my iphone using icloud for windows, but it is not working.  Can anyone please help?

    I am running Office 2013.  Trying to sync my reminders with my iPhone 5c version 7.1.2 using icloud for windows, but it is not working.  Can anyone please help?

  • I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help!

    I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help! Any suggestions for fixing this?

    Did you ever get a solution to your problem? Because I am having the same problem. I was actually in the middle of using Word when the keyboard stopped working. But it works in other apps, including in Excel.
    Thing is that my laptop just got back from Apple for repairs and they replaced everything but the display - including the hard drive.
    So not only do I have plenty of hard drive space, but it should be virus and error free otherwise.
    I have only installed a few programs and redownloaded some of my files from places like Dropbox, but otherwise is essentially a new system.
    Oh - and it came with Yosemite, so I did not upgrade to Yosemite and still Word doesn't work.
    I've always had trouble getting Word to play nice with my Mac but that was also with the old, full hard drive.
    This is a fresh install. And since I lost all my files, I only had like 1 old file I have downloaded from email and accessed and was in the process of
    creating a new file when it crashed. I got no error, the keyboard just stopped working (to type). I also cannot even get Word > Preferences to even open,
    so it is completely unresponsive.
    I did a Google search and under the Microsoft communities two suggestions to that person were that there may be multiple copies installed -
    I have only the one - and that one is in the wrong place - again, I only have the one and it installed to the Hard drive (visible in Launchpad / Apps).
    Another suggestion was that there was some problem with the updates. I ran updates and they installed fine. That helper suggested that the user
    may have had different updates that worked for the other Office apps (Excel, PPT etc.) but not Word and that was at least part, if not all of his problem,
    but all my Office apps show the same update version 12.3.6, so that cannot be the issue with me.
    I've not yet tried uninstalling and reinstalling, but as I got no errors on the original install or updates, I'm not sure if that would fix it.
    I've found that Mac just doesn't play nice with some programs at all.
    And even though I have a factory installed version of Yosemite on a new, fresh hard drive, even when I booted up, my iPhoto app (which is empty) crashed. I am not sure if my iPhone or iPad was charging at the time, but I don't think so. iPhoto that I still have not even used has crashed several more times since, most notably when plugging in my iPhone / iPad to charge, namely when I declined to upload photos (by default) to DropBox. That may not be related at all, but thus far seems the only other problem I have encountered until this Word problem.
    I'm on a MacBook Pro, Sept. 2009, running OS X Yosemite 10.10.1 factory installed from Apple repairs running Office: 2008 for Mac (Home and Student edition).
    Please advise if you found a resolution and what it was.
    Thanks

  • HT201407 i've updated my iphone 3gs software to the latest version of ios and now my device does not activate. i've searched for help here and it still doesn't work...is there anything else i can do, or i have to take the device back to the store?

    i've updated my iphone 3gs software to the latest version of ios and now my device does not activate. i've searched for help here and it still doesn't work...is there anything else i can do, or i have to take the device back to the store?

    Where did you buy this iPhone and how did you unlock it?

  • Touch pad not working of my laptop 48510s help for the same

    touch pad not working of my laptop 48510s help for the same

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...Re-Sync your Content
    Note:
    To remove a forgotten Restrictions passcode you will need to  Restore the Device as New...
    OR... From a Backup created Before the Restrictions Code was set....

  • Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

  • The giant seach bar in the center of the home page does not work, what is this for? also under it is a bar with no title?

    there is a search bar in the middle of the home page, I tried using it and it does not work. what is this for?

    Battery does not appear to charge
    Important: iPod touch cannot be charged with a FireWire-based power source.
    Verify that the power source being used is working properly.
    If connecting to a computer's USB port, verify it is a high-powered USB 2.0 port. Note: The USB ports on most keyboards don't provide enough power, so if you're connecting iPod touch to a keyboard, make sure it has a high-powered USB 2.0 port.
    Verify the computer is turned on and not in sleep or standby mode. If iPod touch is connected to a computer that's not turned on or is in sleep or standby mode, the iPod touch battery may drain.
    Try another USB port.
    Try charging from a USB charger if available.
    If that does not help, try another USB cable if available.
    Learn more about charging the battery.
    The Home button isn't working
    Put the iPod Touch to sleep.
    Wait a couple of seconds.
    Press the Home button.
    iPod Touch should wake up.
    If iPod Touch does not wake up, then iPod Touch should be serviced.
    Resources for Service
    http://support.apple.com/kb/he57
    https://selfsolve.apple.com

  • Audio sound of loudspeaker and headphone of hp laptop is not working.... pls help me

    audio sound of loudspeaker and headphone of hp laptop is not working.... pls help me

    Hi @manishs400 
    I understand that you are having trouble with the sound on your speakers and headphones.I am happy to help with this.
    Please verify the operating system in use on your notebook. It is possible that it make be a driver related issue. Please seethe following for the HP customized drivers for this notebook.
    HP Pavilion dv4-3145tx Entertainment Notebook PC - Software & Drivers
    Also you should check out these pages, as it is quite possible you can find a resolution.
    No Sound from the Speakers (Windows 8)
    Resolving headphones and headset problems (Windows 8)
    From Microsoft's support website:
    Poor sound quality after upgrading to windows 8.1
    Automatically diagnose and fix Windows audio playback problems
    Let me know if any of that works for you.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Z77A-GD55 BIOS 1.9 - Keyboard not working in POST

    Hi,
      I just upgraded BIOS to 1.9. I am using 1HDD + SSD in Intel RST (SSD Cache), UEFI booting
    After BIOS upgrade keyboard is not functional until Windows boot up. When I try to press DEL or F11 nothing happens. Numlock are not reacting. Tryed USB and PS/2 keyboard with same result.
    The big problém is, that I do reset in Windows boot sequence and now, Windows shows menu "reapair Windows boot" and "boot normally". The default is repair with timeout 30 sec and keyboard is not working.
    So There is no way to boot Windows for me....
    The strange is, that when I disconnect HDD and SSD then keyboard is working in POST normally.
    Help please...

    Good troubleshooting!
    Quote
    How to report it to MSI support?
    >>How to contact MSI.<<

  • After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

    After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

    Izit software or hardware? Confuse:(
    Only can use wifi now.
    Any way thanks guys for ur suggestion:) amishcake and simes

  • HT201406 my ipad touch screen is not working please give solution for it.

    my ipad touch screen is not working please give solution for it.
    i have connected ipad to itunes and done it restore seetings then also my touch is not working but
    when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

    If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
    Regards.

  • I have a iphone 5....it's model A1428 but it's not working 4G network...Help Me Please!

    i have a iphone 5....it's model A1428 but it's not working 4G network...Help Me Please!

    Hi rushandias,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help with troubleshooting your cellular data connection:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    All the best,
    Jeremy

Maybe you are looking for

  • How to find the user who did the personalization?

    Hi All, Is there a way to find out which user has done personalizations in a given OA page? For e.g. if a user has done personalization for hiding a text bean in a page, I want to find out that user's name by passing the page name to a script? Even i

  • F.13 Clearing Issue

    Hi, We have posted MIRO document for a particular GL account.During this entry the GRIR account got debited instead of credit, so we passed a manual JV through F-05 to debit the GRIR account. Now I want to clear GRIR account Debit and Credit balance

  • Remove dulicates in mapping

    Hi gurus! My input structure is <IN_MT> <SHIPMENT>          <SHIPMENT></SHIPMENT>          <DELIVERY></DELIVERY> </SHIPMENT> </IN_MT> I need to remove duplicates like this. INPUT: <IN_MT> <SHIPMENT>          <SHIPMENT>11</SHIPMENT>          <DELIVERY

  • Premiere elements 10/photoshop 9

    hello, i just completed a slide show in photoshop 9 and was able to burn a dvd in the premiere elements 9 trial - it had the "trial version" across the screen though - so i purchased premiere elements 10 and can't get photoshop 9 to recognize it.  I

  • Getting TNS-1150 error

    The tnsname.ora file is EXTPROC_CONNECTION_DATA = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1)) (CONNECT_DATA = (SID = PLSExtProc) (PRESENTATION = RO) The listener.ora file is: LISTENER_RMSDEV = (DESCRIPTION_LIST = (DESC