TimeWarner convinced me to get a new modem (faster). Since doing so I had to give my netwrok a new name AND my wi-fi no longer reaches the whole house as it did with the old modem. HELP!!
TimeWarner convinced me to get a new modem ("faster"). Not only did I have to rename my network BUT it now doesn't reach the full extent of the house as it did with the old modem.
If you have a question about one of the Apple routers......the AirPort Extreme, AirPort Express, or Time Capsule.....one of the devices pictured below, we can probably help, but as you say.....if the problems began when you got the new modem from Time Warner, I think you know where the issue likely resides.
A call to Time Warner support would be in order if you are using the signal from the new modem, since they may have forgotten to mention that with higher wireless speeds, the wireless signal becomes weaker, so it does not go as far as a slower signal, or penetrate walls or other obstructions as effectively.
Similar Messages
-
I have suddenly lost the whole of my iTunes library, with the exception of music that I have bought and downloaded from iTunes Store. It was all there yesterday and I haven't altered anything, as far as I know! I hope it's something quite simple?
Apologies, but none of the communities listed seems to fit this question - so I'm taking pot luck!For music that you've purchased from Apple that are on your iPhone you should be able to copy to your computer's iTunes via File > Transfer Purchases. Also if you are in the US then you should be able to re-download past music purchases for free : http://support.apple.com/kb/HT2519
For your own music that you've copied, then if you haven't got a backup on, for example, external drives or CDs/DVDs then you could see if any of the utilities mentioned in this old post still exist and work -
How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
Any cure for this ?Hi
In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
Bengt W -
Extension Manager removing the whole Plug-ins folder along with the panel
When I click "Remove" from the Extension Manager interface, the following has occurred--
In CS6 - When I used the Extension Manager to "remove" by clicking the "remove" button, it removes not just the panel I installed but has removed the folders "Plug-ins>Panels>my panel". The whole hierarchy!
In CS5 - it has left the Plug-ins folder but removed "Panels>my panel"
In CS4 - the Extension Manager is working correctly for installing and removing without removing any shell folders.
Question #1 - What do I do about my missing plug-ins for these applications? This is disastrous!
Question #2 - Is there a way to fix the CS5 and CS6 Extension Manager to not delete the shell folders, when you are just trying to remove a custom panel????
My system:
Windows Vista Ultimate
Service Pack 2
Processor Intel Core 2 Quad CPU Q9650 @3.00GHz
Memory (RAM) 8.00GB
System-64-bit
Hard Drives C: 1Terabyte - 301GB available
Z: 1 Terabyte - 309GB availableAlso here is more info that might be germane--
I am using Extend Script Toolkit CS6 3.8.0.12 ExtendSript 2.12 ScriptUI 6.1.8 to edit and generate 1 .mxi file for use in CS5 & CS6 and another .mxi file for use in CS4.
I open the Adobe Extension Manager for CS5 to create the .mxp files for CS5 & CS6
I double click on the .mxp file and it automatically opens Adobe Extension Manager CS6 and installs the panel into Photoshop CS6
I manually open Adobe Extension Manager CS5 it is sluggish to open and shows a progress bar. Then I do a File>Open to install the panel into Photoshop CS5.
In the testing of various iterations of mypanel, I have removed the previous version of mypanel, so there is nothing showing as enabled or installed in the EM. So, are you kind of saying that if I hadn't emptied out the panel but had left my own panels in there as just disabled, rather than "removed" that the rest of the whole Plug-ins folder would still be there. Leaving something in there would have been like saving an empty seat for a friend at the theater?
The Versions of Adobe Extension Manager that I am using are:
CS6 version 6.0.2.40
CS5 version 5.0.334
CS4 Version 2.1.112 (which appears to be working as it should!) -
I have two apple ID, and I can't switch between them, although I change to my old ID, and it remains in the new ID, and I can't update to old purchases I did with the old id.
I already did according to your suggestion (sign in and sign out) and the id remain on the new one.
Is there something more affective? -
While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?
Hi Vidbrent,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
Just downloaded the new OS for IPhone. Despise the appearance. It has jacked with the way I like things in some unacceptable ways. Is there any way to keep the OS, but return to the old appearance? Important to know BEFORE I download OS for computer.
I know I am responding to my own thread, but I an SOOOO disgusted with Apple right now.
The new iOS 7 was the lead story on CNN today... and it wasn't positive. Easy to see why, it's a graphics disaster. It is ugly, difficult to read, doesn't interface aesthetically with the iPhone 4S, and gives everyone in America vertigo. Either fix the appearance, or find some way to allow us to roll back to our previous iOS. Do so quickly, or this life-long Apple customer [circa 1978] will be moving on. If this represents shades of what is coming with OS Maverick, I am petrified. Further, I am a GM of a chain of newspapers and websites in the Austin, Texas area. I will be ripping out a scathing editorial. The notion that we can't roll back from something millions of us hate is despicable. I'm giving you one week. Be sure I am not alone. -
Hi all. I recently restore my old iphone 5 on my new 6. I'm having problems with bluetooth devices. The ones that were already paired with the old one are not showing in the list, and most of them(not all) are not working or pairing. I already restored network settings to no avail. Any ideas?
What's more, they don't even show on the bluetooth devices list..
-
I changed my apple ID & now the iMessage is not working neither with the old nor the new ID
I changed my apple ID & now the iMessage is not working neither with the old nor the new ID
Sorry to ask an obvious Question, but have you signed out in iMessage and iTunes store on your iPad then logged in with the new ID/Password?
It may be that the iPad is remembering your old login in one part of the iPad. -
I am switching from an iphone 4s to a 5s. When I try to restore from icloud and then choose a backup, it tells me "No iCloud backups are compatible with the version of iOS on this iphone." How can get into my new phone to update?
UUpdate the new iphone to iOS 8.3 before you try to restore the backup.
-
The "apple ID Password" box along with the keyboard pops up when I turn the iPad on and it stays there. I have changed my email address on my iMac and also changed my password. The old email address is still on the iPad. Anyway, I can't use the iPad because can't get the apple id password box to go away. Thanks for any help!
This is an older photo but the sleep and home buttons are still in the same place on all iPads. The home button is the round button at the bottom of the iPad and the sleep button is also called the on/off button and it is at the top right corner of the iPad.
-
Get the month from a date column with the calculated column
I am trying to get the month from a date field with the help of calculated column. However I get this syntax error whenever I want to submit the formula:
Error
The formula contains a syntax error or is not supported.
the default language of our site is German and [datum, von] is a date field.Hi,
I have created two columns
Current MM-YY
Calculated (calculation based on other columns)
Today
Date and Time
Current MM-YY is calculated value with formula as
=TEXT(Today,"mmmm")
But the output shows as December instead of May.
I have tried =TEXT([Datum, von];"mmmm") but no help.
I am trying to populated the column automatically with current month..ex: if its May the field should show May, next month it should show June an so on.
Any kind help is grateful.
Regards,
Pradeep -
Itunes updated and now it won't work. I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open. Says the itunes
library won't work with the older program. Please helpIt says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.) -
my macbook pro got so many scratches and dents, i just want to know that how i can replace it with the new one?
Sell the Old one... Buy a New one...
-
apple new macbook pro dosent have a disk drive. Does the older model have a problem with the disc drive and so is removed in the new model?
No. Apple replaced the disk drive with a solid state drive (SSD) instead. The SSD is faster the old disk drive.
Allan
Maybe you are looking for
-
Multiple Hotspots in a ALV Grid single column
Hi Experts, My ALV Grid report output looks like below.... If you observe below output, column 3 has multiple documents each one separated by ' ; '. Now, I would like to assign hotspot on each documents like DOC1, DOC2, DOC3, etc. Heading#:
-
How to download output into Excel with Header?
Dear Friends, I want to download a my list output into excel format with <b>Column heading</b>. How will I do this? Another question is i want name of database table in Which SAP stores <b>DDIC object name and its property</b>, so that i can
-
Exporting for MySpace Video, You Tube
Any recommendations on the best settings for exporting a video from FCP to post on MySpace or You Tube? It has to be less than 100 mb, but still retain as much quality as possible.
-
Anyone know how to do idoc to http scenario step by step? Especially receiver http adapter configuration. Using a test tool for Http client, how can we get the parameters for it in adapter configuration?
-
ISSUES WITH 2.2 UPDATE ON THE ALLY
The option "Picture Frame" Under Widgets is no longer available. I would rather have the older version of Android back. Anyone no how to set it back to the older software? The dialpad is now smaller buttons and the ringtones selected are not setting