Timewarp only showing half the clip at 50%

I've read a few responses and seen that people have doubled the clip and used pre-comps, and I'm just in a state of disbelief that I have to do these things. It seems like I should be able to apply Timewarp at 50% to a 7-sec clip, and the clip should become a 14-sec clip. This is a little too easy for it not to work.
Any suggestions out there?
Thanks, Ron

Then you should opt for another state: if you're in a 5 m long corridor, you can reach the exit either faster or slower depending on a speed you walk, but it never turns to be a 10 m long corridor. Therefore, drop your 7 sec footage into a 14 sec comp, enable Time Remapping for the layer and extend its tail to the end of the comp.

Similar Messages

HT4623 Gems blast game update only shows half the screen

On 5/4 i downloaded an update to the Gems Blast game. After the update i can only view half the game and the autorotate function has been turned off. Any one else notice this and what is the fix

Hey there,
Try removing the game from your iPod and then resyncing it to see if that helps. A file may have become corrupt during the transfer process. Its worth a shot. Hope this helps.
B-rock

6741 Mobo - Not booting and only showing half the Ram

Put this together and all seemed fine, noticed that only 256Mb ram being recognized, I have 2 x 256Mb. Had a little wiggle now it halts just after post beep.
Tried alternative ram from another system - no different. Using BIOS setup defaults. Any ideas?
6741 mobo
3300+ Sempron
80Gb seagate 7200.7
Radeon 9550
2 x Kingston PC3200 256Mb value
350w PSU

Ok so now i'm booting up ok again. Partition manager had change the system drive letter and screwed the boot loader.
Updated BIOS to latest...still reports only half the ram.
I found this thread:
http://www.computing.net/hardware/wwwboard/forum/37849.html
any ideas what switch he's referring to?
I'm off to play with different ram sticks now.
thanks

PDF only showing half the line of print.

I am trying to print a document, but the screen display in pdf is cutting the bottom of the letters and numbers off. I am running windows xp pro and have upgraded my adobe reader.

Found the problem in my Mozilla setup.

Aperture 2: Viewer/Quick View only showing half of the picture

Hi,
When working in aperture the other day my kitten decided to walk across the desk and keyboard since then the viewer only show half of the pictures. It looks like the viewer is not centered as it is also not showing the Viewer mode button.
Can anyone help it's driving me crazy.

If Allan's suggestions does not work, try deleting the user preferences as described here, Aperture 2: Troubleshooting Basics
http://support.apple.com/kb/HT2945
Tony

Why appstore only show half on the screen on my iPad2 (IOS6)

The AppStore only show half (left) on the screen

Double tap the screen with three fingers.
If you do not want this zooming, in settings/general/accessability disable the zoom.

MBA: dock is only showing half of the indictor light

Hi.
My situation here is more annoying than a problem, but it's pretty simple: whenever the indicator light on the dock is switched on and programs are open/running, the dock is only showing half of the indicator light (the rest is hidden under the dock plattform).
This happened after I updated my MBA to OS X Mountain Lion.
Can anyone help me with my annoying problem?

Unfortunatetly this is one of the design changes Apple made. I too find it annoying. You can go here to register your unhappiness and request change. Be sure to explain why this new design is not good.

Safari only shows half of the internet pages

Safari on my iPhone5 only shows half of the webpages I go to. It's not even a propper half, like, it's slim or missing the bottum. No, it just shows one corner and the rest is black and gray. It's hard to discribe so I made 2 printscreens. This is how it looks like when the screen is vertical:
http://nl.tinypic.com/view.php?pic=29dbbj5&s=8#.VDvqfmd_vZ0
And this is horizontal:
http://nl.tinypic.com/view.php?pic=9qjwk8&s=8#.VDvrOGd_vZ1
What is going on and what can I do to fix this?

Hi RedRavenRiot,
If you are having issues with your iPhone only displaying part of a web page, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
iOS: Force an app to close
Next, I would try restarting the iPhone -
Turn your iOS device off and on (restart) and reset
If the issue is still present, you may want to restore the iPhone as a new device -
iOS: How to back up your data and set up your device as a new device
Thanks for using Apple Support Communities.
Best,
Brett L

My screen is only show half of the application what resolution should i use

My screen is only showing half of the application, what resolutions should I use.
MacBook Air. December 2010

It depends on which model you have:
13" - 1440x900
11" - 1366x768
This of course assumes you are talking about your internal display.

I have a document that I wrote today on my phone, went to open it again and the app kept crashing or it would only open half the file. Is anyone else having this issue? On the preview it shoes the whole file, but when I open it only shows a few paragraphs

I have a document that I wrote today on my phone, went to open it again and the app kept crashing or it would only open half the file. Is anyone else having this issue? On the preview it shoes the whole file, but when I open it only shows a few paragraphs. When I email the file it only shows a few paragraphs, but when I go to open it both on my ipad and iphone it crashes the app.
Everything is up to date.

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

Keyboard on messenger not working right. Will only show half of keybrd

How do I fix my keyboard on messenger? It is only showing half of keyboard & it is in the middle of the page. Help

Press and hold the keyboard icon on the keyboard and select Dock.

I have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

i have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

Hi,
Have a Look at these Links on Home Sharing:
http://support.apple.com/kb/HT4620
http://support.apple.com/kb/HT3819
Could be what you need...
Cheers,

Events over multiple days only show on the first day in 'Month' view

Hi,
I've noticed that if I create an event that spans over two days (for example 23 May 2008 at 6 PM to 24 May 2008 at 1 PM) are only displayed on the from date in Month view.
This is unfortunate because if I look at my calendar in Month view, I think I'm free on the 24th, when in fact I'm busy until 1 PM.
Is there a way to get the Month view to display an entry for the event on both days (other than creating one event running from 23 May 2008 at 6 PM to 11:59 PM and a second from 24 May 2008 at 1:01 AM to 1 PM)?
Message was edited by: Sam Watterson

Hi Sam
I just had the exact same problem the other day. I was asked to make an appointment with someone, I checked my calendar (actually on my iPhone) and I looked available that day so agreed and even entered the event. Turns out I will be working 70 miles away on the event I entered on the day prior. I've had the embarrassment of having to reschedule - makes me look disorganised.
The month view on iPhone is just the same as iCal - if it's not an 'all day' event it only shows on the first day. This is poor. I recall even outlook and windows mobile calendar manages to display this sensibly. Apple should be fixing this pronto.

Printer only prints half the words, HP6200

Printer only prints half the text. In other words, the text is shown only half the size.

No one could possibly help you with that little detail.
How about - what printer, what operating system, how is it connected.....
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Please help me. I've just lost my iphone so I related to my backup contacts on icloud to get my contacts back. But my contacts only show at the first time and then they dissappeared, my contacts was empty. How can I see my contacts?

Please help me. I've just lost my iphone so I related to my backup contacts on icloud to get my contacts back. But my contacts only show at the first time and then they dissappeared, my contacts was empty. How can I see my contacts?

If they aren't on icloud.com they are no longer in iCloud. If you don't have another backup, I'm afraid they're gone.

Timewarp only showing half the clip at 50%

Similar Messages

Maybe you are looking for