Timezone in 'Your Control Panel' - spelling error...

Hi Forum administrator,
In 'Your Control Panel', there is a Timezone for each user, one of the contents is showing the wrong spelling for the state...
Currently the spelling is showing the wrong spelling
<time> - <b>Kuala Lampur</b>, Singapore.
By right it should be the following
<time> - <b>Kuala Lumpur</b>, Singapore.
I hope the forum administrators or person responsible can correct the time zone country's spelling...
Thanks and regards,
William Wilstroth

Hi
Nice find... (good that you brought it to the notice of the administrators...)
Regards
Raj

Similar Messages

Your Control Panel

When you click on your control panel and search for all user messages (yourself)
you are provided with the following information
>
JDeveloper and ADF (1)
SQL and PL/SQL (3)
Forms (20)
Database - General (2)
Reports (1)
Community Feedback and Suggestions (Do Not Post Product-Related Questions Here) (1)
>
but when you click on this, you do not go to the message which you wrote but to that forum.
what is the point of Forums containing your results if you click on it only to go straight to the forum and not your question?

The search for user messages is seriously strange, and slow. It's like whoever put this jive together just didn't get the ideas of sets, subsets, boolean logic and hierarchies. I would like to be able to say "give me the last 50 posts of this particular guru in that particular forum" one way or another.

Lync Server 2010 control panel - Server Error in '/cscp' Application

Hi everyone,
Recently i have installed Lync 2010 with no problem at all. But when i try to open de control panel it sends me this error:
Server Error in '/cscp' Application.
Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[TypeLoadException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) +0
   System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) +153
   System.Type.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +63
   System.Web.Compilation.BuildManager.GetType(String typeName, Boolean throwOnError, Boolean ignoreCase) +124
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +76
[ConfigurationErrorsException: Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) +12406256
   System.Web.Configuration.Common.ModulesEntry.SecureGetType(String typeName, String propertyName, ConfigurationElement configElement) +69
   System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) +62
   System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) +299
   System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) +1262
   System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) +133
   System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) +304
   System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) +404
   System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext) +475
[HttpException (0x80004005): Could not load type 'System.ServiceModel.Activation.HttpModule' from assembly 'System.ServiceModel, Version=3.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.]
   System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12599232
   System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
   System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12438981
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.33440
Anyone has any idea what is going on?

To fix your issue, you can refer below link
http://social.technet.microsoft.com/Forums/lync/en-US/14948578-dfaa-4d32-b29d-42ecf576afeb/lync-control-panel-errors
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Windows icloud control panel installer error

I control uninstall or repair the Windows Icloud 4.00. I cannot install the update 4.01 either. Any workarounds? Symantec has a utility to completely uninstall their software in Windows. Does Apple have the same?

When trying to install iCloud for Windows in Windows v8.1 64 bit I get the error:
"The installer encountered errors before iCloud Control panel could be configured. Your system has not been modified. To try these operations at a later time, please run the installer again"
I have disable the Anti Virus, removed other Apple apps, re booted the system and have tried the installer several time from several sources. THEY ALL FAIL.
Excerpt from Event Viewer;
Product: iCloud -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action RuniCloudUpgrade, location: C:\Program Files (x86)\Common Files\Apple\Internet Services\, command: C:\Program Files (x86)\Common Files\Apple\Internet Services\iCloud.exe /upgrade
My stystem does not have a C:\Program Files (x86)\Common Files\Apple\Internet Services floder

Icloud control panel server error in widows vista

Had to uninstall all icloud, itunes, apple update, etc in order to clear a "file not found" message at windows boot/restart. That worked fine, but now after reinstalling icloud control panel for windows vista, I can't sign in to configure. Getting "You can't sign in because of a server error" message.

Hi there PoPpOper,
You may find the troubleshooting steps in the article below helpful.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
-Griff W.

ICloud Control Panel Runtime Error

Hello,
The Apple update service carried out an update yesterday to the latest versions of iTunes and iCloud Control Panel on my Windows 7 Toshiba notebook. Following the (requested ) reboot, all attempts to log into the iCloud Control Panel result in a Microsoft Visual C++ Runtime error, code R6034 with a message to contact the application's support team for more information.
If I OK all the error messages, (three times), it finally logs into the iCloud server.
I have uninstalled and re-installed the latest version of the Control Panel software, but the result is the same.
Short of going back to the previous version, are there any workrounds that I can try in order to resolve this.
Thanks
Ian B

I have the same problem with windows 8.1. This is very annoying. The error pops up on every boot.

Lync server 2010 control panel SoapException error

We had a multi-site installation of Lync 2010 up (2 FE servers, 2 back-end SQL servers, 1 director, 1 Group Chat) and running when suddenly (and no one has any explanation of what happened, of course) no one can logon the Control Panel. Those in the
CsAdministrator group are flat out denied (not an RBAC denial) and new users added to the group received a SoapException (CS2001, CS2008) and a long, drawn-out explanation of why it failed:
An operation failed. System.Web.Services.Protocols.SoapException: Server was not able to process request. System.InvalidOperationException: Unable to generate a temporary class (result=1) Error CS2001: source file "c:\windows\temp\xxxx.cs"
could not be found error CS2008: no inputs specified
At the same time, the Group Expansion is also no longer working and the Group Chat Lookup Service refuses to stay running (although I'm not sure this ever worked, given the other issues)... I did find some blogs/articles that mention something
about the permissions on the C:\windows\temp folder for other products (FIM, Visual Studio) but not for Lync. The installation is still in beta testing, so a complete re-do isn't beyond the scope of the install... just something I would rather avoid
if possible.
Suggestion? ideas? questions??
Thanks for the pointers...
Mike

Hi,
Thank you for sharing the information. It is useful for others who may encounter similar issues. You time and effort are appreciated.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

ICloud Control Panel "Server Error"

Hi I am using iCloud Sync for Windows (Chrome Sync) and I keep getting the error message that there is a "server error". Any insight? I checked the server per Apple's suggestion and everything is "green" lit on their end.

To solve this problem you can:
Windows 7
1) Click on Start
2) Type cmd and press enter
you will see a new window
3) type "netsh winsock reset"
4) restart the machine
should work.
If still does not work you must disable the firewall and antivirus
Para solucionar este problema debes hacer lo siguiente:
en Windows 7
1) click en Inicio
2) escribe CMD y pulsa enter
te va a aparecer una nueva ventana
3) escribe "netsh winsock reset"
4) reinicia la maquina
deberia de funcionar.
Si aun no funciona debes de deshabilitar el firewall y el antivirus

Icloud Control Panel Installation Error

Using Windos 8 and Outlook 2010
Things were working well and then iTunes stopped woking. I installed it and reinstalled it. No progress. I then uninstalled iCloud and reinstalled iTunes and it worked. Then I reinsatlled iCoud 2.1.2 and it refuses to complete the set-up with outlook. I tries iCloud 1.x as well. Same. I unstaleed everything including Offcie 2010 and deleted my primart .pst file (I use imap so its all on the server anyway). I even used a registry cleaner to really remove any traces of outlook and icloud. Reinsatlled Outlook and icloud but I still get stopped when I try to set up Mail, Contatcs, Calendars & Tasks. Bookmarks and Photo Stream are fine.
Any thoughts?

In order to get mine working in the same situation, I had to delete both the iCloud data file and the [email protected] e-mail account. Once that was accomplished, I was able to get the iCloud installer to close Outlook and install itself correctly. Trying to recreate the accounts again from within Outlook was not the solution and resulted in this error.

X220 Smart Audio Control Panel failed to initialize smart audio

Cannot seem to start Smart Audio control panel get error every time. Currently running latest driver 8.32.23.2. Can anybody please help? I need to access the Smart Audio to control displayport audio settings. Aside from that the audio seems to work fine.

Yes, this is what I thought also. But I don't think it does. It has the s-bracket JSP2 connector but it (s-bracket) doesnt work.
It really doesnt matter now though as you can see I listed it on ebay with my old cpu. I will likely buy me an EPoX 8RDA+. It outperforms the 6570 in performance and has all the bells and whistles.
MSI has some horrible customer service. However, I must admit you have been very responsive and helpful but, you are not live tech suport.
I do appreciate it nonetheless. :D
I called their support long distance number and was on hold for about 45 minutes, off and on, and the last time I was on hold I put my phone on speakerphone and went in the other room. The guy came back on said, "hello sir? Hel..Click!" I didn't have time to say anything! I was so pissed I wanted to take my motherboard back right then. He kept having to ask other people questions about my problem. It was just plain rediculous. That is just one of the reasons this motherbaord is on ebay. I about to put my MSI Geforce4 4600 vtd on ebay also because I dont want to have to deal with MSI CS.
Thank you again, for all your help

How the heck does one change one's email address in the Control Panel

I know this is the wrong place to post this but I don't know where the right place is!
In about a week I am changing to a different broadband provider and the email address I have associated with these forums will no longer be valid. Obviously very easy to deal with - just go to "Your Control Panel" and change the email address ! I must be missing something because I can see my email address but cannot see any way to change it ! What am I missing?

sabre150 wrote:
Thanks for that! I tried to use an old email address of mine but it won't let me because 'that account already exists' . Had to create a new one!
What a wonderful bit of software this forum software is.My +5k post count did not make it through the migration;
When the migration guidelines said you have to use the same email address in the old and the new account I just changed the email address in the old java forum account to be a current email address, then signed up to the new forums with that... They could have said it must be the email address you used when you originally signed up in the old java forum - but that was back in '98 and I probably did not have access to that when the migration happened...
I don't particularly care about the post count, but as my old posts are not linked to my account it makes it difficult to search through them...

Exception trying to start the JRE Control Panel

I've run into some persistent problem with seemingly any version of the JRE on my WinXP system. Whenever I try to start the control panel, either from the Windows Control Panel UI, or from the Java system tray icon, I get an exception error:
java.lang.ArrayIndexOutOfBoundsException: 365
     at com.sun.deploy.panel.UpdatePanel.setText(Unknown Source)
     at com.sun.deploy.panel.UpdatePanel.actionPerformed(Unknown Source)
     at javax.swing.JComboBox.fireActionEvent(Unknown Source)
     at javax.swing.JComboBox.setSelectedItem(Unknown Source)
     at javax.swing.JComboBox.setSelectedIndex(Unknown Source)
     at com.sun.deploy.panel.UpdatePanel.reset(Unknown Source)
     at com.sun.deploy.panel.UpdatePanel.<init>(Unknown Source)
     at com.sun.deploy.panel.ControlPanel.initComponents(Unknown Source)
     at com.sun.deploy.panel.ControlPanel.<init>(Unknown Source)
     at com.sun.deploy.panel.ControlPanel.main(Unknown Source)
This is what happens on the first attempt after the OS has booted, and subsequent attempts just result in nothing obvious happening (no control panel, no error, nothing).
I currently have JRE 1.6.0_07-b06 installed, but this seems to be happening with any JRE version I try. I had remnants of older JRE's under C:\Program Files\java, and I went through ensuring that each was removed (if I could get rid of it via Add/Remove Applications, I used that) until I was down to zero other than the MS JVM that is inherently part of Windows. I then installed the current Sun JRE and still have the problem. :-\ So not sure what it is the JRE control panel is trying to do here, nor how to fix it other than reinstalling the OS (and I'm not that desperate, but it really is annoying).
I figure it's probably something still hanging around in the Registry (<shudder!>) and poking around under HKLM\SOFTWARE\JavaSoft, I see keys for various old versions under the \Java Plug-in, \Java Runtime Environment, and \Java Web Start keys, most of which look like references to directories or files which no longer exist on the system. Any thoughts as to whether I can just safely delete these keys as a sanity check (jeez I wish Sun had steered clear of the Registry)? What I'm wondering is since the JRE control panel (when it works :-) shows you a list of installed JREs it found, I'm wondering if these bogus versions listed in the Registry are causing the ArrayIndexOutOfBoundsException.
Any ideas are greatly appreciated. Thanks in advance!

start JRE control panel

Why don't I have Boot Camp Control Panel?

I am currently asking this in Yahoo! Answers as well:
I just used Boot Camp Assistant around a week ago to install Windows 7 Ultimate on my Macbook Pro with Retina Display (and if it also helps find a solution: I'm also using Mountain Lion). At first, certain keyboard functions that can be used in the Mac OS (such as brightness and volume adjustment; oh, + the trackpad functions) that couldn't be used in Windows didn't exactly bother me since I was able to manage without them... until I started to play online games - which is the main reason I had to dual boot my macbook. When I already found it annoying to continuously click control+left click to perform right click, I started to look for solutions, and I noticed that most people online have said, "Oh, simply adjust your settings in the BOOT CAMP CONTROL PANEL. There should be this DIAMOND in your task bar; click on it so that you can apply changes you want. It should be there after you have installed Windows..." ... Well, thing is: in my case, it DOESN'T APPEAR! "Check your control panel," they say. "You will surely find it there." Check for me, if you will, because I seriously have no clue why I can't find it, even after checking using the Search bar...
Now... why don't I have Boot Camp Control Panel? I find it really strange how it doesn't appear in mine when it does in most of other people's... I kinda dislike the idea of reinstalling Windows, because over the week, I've downloaded several drivers and other applications (mostly games). Is there any way I could get it without having to undergo the process of deleting and uninstalling files? I need my Mac OS for school and office work (don't ask) and I need to have my entertaining pastimes using Windows. Please don't hesitate to suggest as many ideas as you can...
Thank you!

It appears from your description that you did not download and install the Windows support software. It was one of the first menu items you saw when you started Boot Camp Assistant.
Run Boot Camp Assistant again and select the menu option to download the Windows support software. Save this download as described then install it from within Windows.

Cannot find the QuickTime 7 Control Panel - settings

I cannot find the QuickTime 7 Control Panel. I have QT7 player on my laptop and am trying to enter registration code for QT Pro. I'm running windows vista.

If you're currently displaying your Control Panels in Category View, you'd need to change your view to "Large icons" or "Small icons" to see the QuickTime control panel.
Alternatively, launch the QuickTime Player and go "Edit > Preferences > QuickTime Preferences" to bring up the control panel.

Trying to download icloud control panel - only getting so far. Got message: The installer encountered errors before iCloud Control Panel 2.1.2 could be configured. Your system has not been modified. To retry these operations at ltr time, pls run again.

First time on here... so not sure if doing correctly.
I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok). I only get so far - 2 times I've tried it. Keep getting message:
The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
huh?

As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
- Right click on "my computer"
- Select the "Advanced" tab
- Click on "Environment Variables"
Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
Or you may just go to a DOS Prompt and type the following commands:
1 - %temp% and hit enter
2 - %tmp% and hit enter
to both of these commands you will get a reply such as:
'c:\temp' is not recognized as an internal or external command, operable program or bath files.
So by looking at the reply you can see that my temp folder is c:\temp
The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
Hope it helps.

Timezone in 'Your Control Panel' - spelling error...

Similar Messages

Maybe you are looking for