Timing messages showing up in portlet area

I am getting a message like "Portlet Timing: 1532 msecs (wait=10) Cache Status: HIT,PING" for each portlet on the page. I had show portlet timings enabled on the global settings but that is now turned off. Is there some other config file setting that is causing these messages to appear?

I had the same problem, has anyone fixed it?
Thanks
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jim Wakefield ([email protected]):
I am getting a message like "Portlet Timing: 1532 msecs (wait=10) Cache Status: HIT,PING" for each portlet on the page. I had show portlet timings enabled on the global settings but that is now turned off. Is there some other config file setting that is causing these messages to appear?<HR></BLOCKQUOTE>
null

Similar Messages

Updated to iOS 5 and now photos sent with text message show as sent, but are not received to an iPhone that has not been updated.

Updated to iOS 5 and tried sending a message with a phot to an iPhone that has not been updated. My message shows as sent, but neither the text or photo are received. Text alone works fine.

This is being caused by using the same Apple ID for iMessage. To fix this you have two choices:
On all but one of the phones go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a different ID. Note: you can still share the same ID for purchasing in Settings>iTunes & App Stores; or
On all of the phones go to Settings>Messages>Send & Receive and uncheck the email address(es) shown under "You can be reached by iMessage at".

Photo messages showing ! notification but are sending?

when i send a photo message is notifies me that it has not sent but the contact does recieve photo ?

Hi. This will be an IMAP problem of this concrete email account. Try to go in the setting of this account on the web and in the phone and adjust What is possible.

On previous iPhones you could go to settings and block the the actual text message from pooping up. Only the sender would show up. On the i4gs the sender and message show up. This is a major flaw as far as privacy. There are no options with in settings to

On previous iPhones you could go to settings and block the the actual text message from pooping up. Only the sender would show up. On the i4gs the sender and message show up. This is a major flaw as far as privacy. There are no options with in settings to stop this from happening. PLEASE TELL ME IM WRONG ???

YOU ARE WRONG.
Go to Settings > Notifications > Messages. You can turn Notifcation Center off for Messages, or select None for the alert style, and turn Show Preview off, and view in Lock Screen on or off.

I have 2 phones on my iTunes account, why are text messages showing on the second phone when sent from the first

I have 2 phones on my iTunes account, why are text messages showing on the second phone when sent from the first phone?

it's meant to work like that
so if you receive a message on your iphone you also get it on your ipad or ipod touch
to avoid it use separate appleID for each device
or turn off imessage on 1 or both devices in their settings
but that will not fix the issue that 2 devices using the same appleID will never be able to facetime eachother
the appleID is a unique handle for 1 user only

My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

My young kids have ipads and since I updated the software, but they have their own icloud account, predictive text within their messages shows all my contacts from my iphone but the contacts are not listed as their contacts, how do I stop this?

I have deleted the iCloud account under my name on their iPads and replaced with their ones. Apple support said yesterday I needed to click the small 'I' by each name as it came up in the TO box and remove it. After doing rid for each contact under each letter of the alphabet it should remove them from latest contacts. Having done this, although I could not remove groups I had sent, I am not convinced they will not return once I have written a few texts, any ideas?

CS Bridge when opening file shows " Some Application Components are missing from Application Directory- Reinstall". Uninstalled with uninstaller, reinstalled from disc. Message continues only in Bridge not in PS. Please help.

CS Bridge when opening file shows " Some Application Components are missing from Application Directory- Reinstall". Uninstalled with uninstaller, reinstalled from disc. Message continues only in Bridge not in PS. Please help.

What version of Bridge and Photoshop and what platform? Mac or Windows? I can point you to a downloadable installer.
If the cdrom was damaged, it may be the problem.
You would uninstall and use the CC/CS Cleaner to remove any remnants before reinstalling.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
I'll be gone for most of the day, but someone should be able to help you if you get stuck.
Gene

I can't signin icloud the message showing that so many apple id are activated in this iphone

I am not able to signin in icloud ,the message showing that "" you cannot singin because so many free apple ids are activated in this iphone "'. how I remove those free id

That indicates that the maximum number of iCloud accounts has already been created on your device. All you can do is re-use one of the accounts previously created, or create a new account to use on another iOS device or Mac (running OS X 10.7.2 or later), if you have one.

Why are my text messages showing up on my wife's IPhone 6 and her Text messages showing up on my iPhone 6?

Why are my text messages showing up on my wife's iPhone 6 and her test messages showing up on my IPhone 6?

its because you guys are using the same Apple ID on both devices , when you use the same it connects to iCloud/iMessages so when ever you get a text on any other iPhone with there iMessages on its going to show on both devices because its the same apple ID that you are using for your iMessages , you can fix that buy gating a new apple ID for one of you ,ore go to your system preferences then go in to your iMessages remove your email from there make shore its only your number on there ,but the best why is to get another Apple ID.

Why are SPAM messages showing hits=negative numbers and getting through?

Message headers in known SPAM are reporting NEGATIVE numbers!
How do I figure out what rule is pushing them into the negative?
No wonder SPAMASSASSIN isn't catching much.
===========================================
Here are headers of two SPAM messages:
X-Spam-Status: No, hits=-4.102 tagged_above=-999 required=3
tests=ALL_TRUSTED,
AWL, BAYES_00, HTML90100, HTMLIMAGE_RATIO06, HTML_MESSAGE
X-Spam-Level:
==============================================
X-Spam-Status: No, hits=-3.283 tagged_above=-999 required=3
tests=ALL_TRUSTED,
BAYES_00, HTML90100, HTMLBADTAG_0010, HTMLIMAGE_RATIO02,
HTML_MESSAGE,
HTMLTAG_EXISTTBODY
X-Spam-Level:
===============
Does that mean that one or more of the tests shown above has to be the culprit?
Thanks,
Keith

This is the test you do not want to trigger for external mail: ALL_TRUSTED
Chances are you are using NAT. For a solution see here:
http://wiki.apache.org/spamassassin/TrustPath
HTH,
Alex

How to show or hide portlets dynamically on a Portal Page

Dear All
1. I have a Portal Page with One Portlet in the top having like 5 Buttons. Each button click should display a separate portlet in the bottom on this same page.
2. I have Top Portlet. For bottom I have 5 Portlets P1, P2, P3, P4 and P5. On my .portal file, I dragged and dropped top portlet and all these 5 Portlets one below each other.
3. Now, I am trying to use BackingFile approach at PageLevel/Portlet level, to get the details of button clicked in top portlet (like name etc), and then show only one portlet at a time in the bottom section (using portlet backingcontext show/hide APIs). I do need to compare the bottom portlets defintion_label etc. which is fine for now.
Is this the right approach...?
Or do I have to use Portlet Custom Event approach. So top portlet will trigger event everytime button is clicked with some payload. And bottom 5 portlets listen to that event and show/hide accordingly. But in this approach, I have to attach backingfile to all the bottom portlets to listen to them.
All the portlets are Pageflow based Portlets. Any ideas or any other simpler approaches, are highly appreciated.
Thanks
Ravi Jegga

Hi Kevin
1. Thanks a lot for the pointers. I will go with Events. So for bottom Portlets, I will use the same BackingFile. But still it is going to be custom Event. Because only one portlet will be shown. So its like my payload will be portlet def label. In Backing File, I will compare this payload with actual dynamic value and if same, show or hide that portlet. Please let me know if this is correct approach.
2. Now each one of the Bottom Portlets is a complex pageflow portlet with many buttons of their own. So everytime a button is clicked or action is invoked, the Backing File gets called. And I had to somehow know that the same portlet has to be shown or the show/hide logic should not be called. Is there any way, where backing file gets called or just listen for Events triggered only from main top portlet.
Thanks for the other message, where looks like you already gave lots of pointers. I will go through them.
I will design and test this out and will keep you posted with my results.
Thanks a lot again
Ravi Jegga

Why Outlook email messages show unreadable characters

When you receive a new email in Outlook, you may see unreadable characters in the email message body. This issue could be caused by one of the following reasons on Outlook client side:
The email you received is converted to plain text format or a different encoding by a virus scanner.
This always happens when you are using characters (Such as apostrophes, double quotes, dashes, and ellipsis) supported by the "Smart Quotes" feature. When the email you received is converted to plain text format or a different encoding by a virus
scanner, the character is converted from the ASCII character to a Unicode character, which is not supported on the recipient’s side.
To prevent this issue from happening, we can turn off the “Smart Quotes” Feature in Outlook:
1. Open Outlook 2013.
2. Click File > Options > Mail.
3. Click Spelling and AutoCorrect button.
4. In the Editor Options window, click AutoCorrect Options button to open the AutoCorrect dialog.
5. Click AutoFormat tab, and then clear the check box before “Straight quotes” with “smart quotes” under Replace heading.
6. Click OK.
The issue may be related to font substitution when a change is made to the Web Options in Microsoft Word.
If a change is made to the Web Options in Microsoft Word, registry data under the following key may be configured incorrectly:
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Word\Internet\Fonts
This problem has been seen to occur when the Latin string value under the \Fonts key was empty (no value).
We can check the Web Options setting in Word via:
1. Start Word.
2. Go to File > Options > Advanced.
3. Scroll down to the General section, click Web Options button.
4. Switch to Font tab.
To resolve the problem, we need to delete the \Fonts registry key. To do this, please follow:
1. Exit Word.
2. Press Windows key + R to open the Run command, type regedit and press Enter.
3. Navigate to:
HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Word\Internet\Fonts
4. Right-click the Font key and select Delete.
5. Click Yes and exit Registry Editor.
The sender used an e-mail program that did not mark messages with a language encoding (character set), or marked messages with an incorrect encoding setting.
In this case, we will see unreadable characters when we open the received message in our Outlook. For example, European regional characters (like German) require UTF-8 encoding protocol. So if the encoding in your environment is set to ASCII, the regional
characters will not be available.
To resolve this issue, we need to change the encoding in Outlook to which will display your message correctly.
1. Double-click to open the message you received.
2. Click Actions button in the Move group under Message tab.
3. Click Other Actions > Encoding.
4. Click More and select the correct encoding setting for the email.
5. After you finish reading the message, close the message, and click Yes button to save changes to the message.
When we send an email with Outlook, we can set Outlook to automatically select encoding for outgoing email messages to increase the possibility that the recipient receiving the message will see all the characters rendered properly, even if they run older
e-mail programs. By default, Outlook 2013 will automatically select an optimal encoding for outgoing e-mail messages. We can change the settings here in Outlook 2013: File > Options > Advanced > International Options section.
Something you may need to know when you set the encoding settings:
* The Unicode (UTF-8) character enables the complete range of characters on all computers. It’s the official IANA code for the UTF-8 character encoding.
* Western European (ISO) and Western European (Windows) character set can be read by almost all computers.
* If you are using a language other than English, you must choose the correct character set for that language, or the characters you need will not be displayed correctly.
If you have any comments on this article, please feel free to post here.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

The "problem" is not really a problem. I send and receive emails fine. But the in the panel between the Inbox (message queue) and the reading pane this is displayed:
From Mozilla Support Forum <[email protected]> (white star)
Subject Toad-Hall posted an answer to your question "Why do received email messages show they are addressed to an address other than my own?"
Reply to [email protected] (white star)
To [email protected] yellow star)
cfortso@gmail is the address of one of my contacts.
This glitch is not really bothersome, I just can't imagine why it happens.

HT5538 My brother and I share an iTunes account and his text messages show up on MY macbook. His texts don't show up on my phone though. how can i delete his number off my iMessage on my laptop?

My brother and I share an iTunes account and his text messages show up on MY macbook. His texts don't show up on my phone though. how can i delete his number off my iMessage on my laptop?

These are iMessages only.
He activated iMessage on his iPhone with the same Apple ID that you activated iMessage with on your Mac.
On your Mac, go to Messages preferences.
Under the Settings selection for your Apple ID, deselect your brother's phone number for you can be reached for messages at.

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

Hello there DesertRat71,
I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
All the best,
Sterling

I started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues

Timing messages showing up in portlet area

Similar Messages

Maybe you are looking for