Timing mismatch between picture and sound.

I have been using Premier Element ver. 12 with my films recorded with my Canon EOS camera without any problems. I have now been trying to clip a film recorded with a MAC copmuter. The files have .mov extension. My problem now is, that the sound and the pictures are not sycnroniced anymore. It seems that the Pictures are 3 seconds faster per minute than the sound. So after 20 minutes the Pictures are 1 minute in front of the sound. Playing the original files with the Windows player Works fine and the timing of the sound in Premiere Elements fits with sound using the Windows player.
Any Ideas????
Gert Munch

Hi' ATR
Ref. #8
Loading one of the problem files into Movie Maker Shows a small but constant shift between sound and Video within Movie Maker. Easy to fix. Exporting and import into Premiere Elements shows the same small but constant misallignment. That is good.
The screenshots of the required readings is seen below
Properties from Premiere Elements:
I did not dare to install the MediaInfo properties readout program as I was warned about malware.
Ref. #9
From Movie Maker the Video bitrate is stated to be:
15-12-14: 177232 kbps
12-01-15: 81164 kbps
16-02-15: 177396 kbps
10-03-15: 280596 kbps
From the above screen shots the audio bitrate seems to be 128 kbps
Hope this makes sense to you.
Gert

Similar Messages

Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?

Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?
Movie details
QuickTime Movie
Size: 17.95 GB
Duration 17:39
2 audio channels
Codecs- Linear PCM, Apple ProRes 422, Timecode
Thanks!!

You can't use iMovie to create a video DVD - for that you need iDVD:
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

Insert picture and sound without external sources

how can we insert pictures and sound without using external sources??
i mean , i want to make the picture somehow embeded inside the program, not from external source,
can any1 help?/

I sense that what you need to do is create a Jar (java archive) file for your code and images and any other resources. Do a search on the forum for the terms -- jar pictures getresource -- and you'll get a ton of helpful threads. Also check Google. Some useful links:
http://java.sun.com/docs/books/tutorial/deployment/jar/
http://forum.java.sun.com/thread.jspa?forumID=54&threadID=5183949
http://www.cs.princeton.edu/introcs/85application/jar/jar.html

Mismatch between availability and marker

I have run the following command:
/repvfy -detail -fix -pwd password
and am seeing a section called "Mismatch between availabiltiy and marker". What does this mean? I know there is a bug out from Note: 735957 against 10.2.04 and that patch 6951116 is available. I also know this bug is fixed in 10.2.0.5. But I don't know what exactly this section is telling me. Here is the output I am seeing:
6. Mismatches between availability and marker
TARGET_GUID TARGET_NAME TARGET_TYPE MARKER_AVAIL_STATUS MARKER_TIME CURRENT_STATUS START_TIME
9CB8EE19415C3C6B55954BF3346C1106 ssan-Internal Concurrent Manager oracle_apps_icm 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:22
1B21AAEF5AC63DD44FE339B7852EA1EE ssan-Report Server_ssan_devstar2 oracle_apps_reports 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:13
F5EAD749526EC1116A70157771E3D011 ssan-Oracle Workflow Agent Listener oracle_apps_wfalsnr 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:29
CD32714673BC508CDBF85BF191A5A1B7 ssan-Workflow Background Engine oracle_apps_wfbg 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:26
FADA1D6BF4DFD0E8AA1739A6666BA210 SSAN oracle_database 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:40
0BE2ACE2EDC7271744DA1A249E30C9A5 APPS_ssan oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:12
89D241EEEF24821E30AD66741BC3D433 devstar2.rtd-denver.com oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:20
F40BAF501645A5957A498E7A270AEA47 ssan-Apps Listener_ssan_devstar2 oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:28
8 rows selected.

Various provision like Freight, transport etc .
these should go to separate GL accounts. if you give wrong account assignment value will be passed to GRIR. then difference will happen
sunoj

Color mismatch between CS4 and Canon PIXMA PRO6500

Hi there! I am trying to research if anyone else is having a problem with color mismatch between CS4 and their printer. Last night I printed a .tiff image out of CS4 to my Canon PRO6500 printer and the sky came out purple / pink! It was supposed to be a stormy grey color. I have the color management turned off on the printer settings. I have CS4 manages color turned on and the correct ICC profile selected for the paper I am using. When I do a soft proof in CS4 the image looks fine, but when I print I get something completely different, mostly with the sky (purple / pink) color! Just for the heck of it I did a Print Preview under my Page Setup and guess what, the sky actually shows purple / pink! So I have no idea what's going on. I checked all my setting, ink cartridges, tried different paper with the appropriate ICC profile and no dice. Still have a goofy looking sky! I thought PROOFING the image is supposed to show you how the printed image is going to look? apparently it doesn't because it's not. The Print Preview has an accurate representation of the print but I have no idea where the pink / purple sky is coming from. They are supposed to be stormy clouds as I said. I appreciate any help anyone can provide .
Sabciu

I have the color management turned off on the printer settings.
But do you have a measured color profile based on a sample print? Most likely not, so this is not doing anything in your favor. The current profile may present the defaults for a given printer, but not the actual density based on your other printer settings. So by all means, unless you can be sure to obey a full calibration throughout, turn on the printer CM. Also, since it is a Pro model, you may actualyl have to use the dedicated RIP software that was bundled with it to get correct results, not the default windows print engine.
Mylenium

Config mismatch between VSM and VPath - CSCum76142 bug

Hi all,
I got the error message "Config mismatch between VSM and VPath" on my Nexus VSM but I could not see any detail regarding this bug ID due to permission issue. Has anyone else got access to see this bug detail and able to share? I need to know if this bug is critical or just cosmetic. Thanks
regards,
Robin

Hi Robin,
This DDTS was Junked. But here's the workaround that is mentioned:
1. Deleting the vservice config (no vservice) & reconfiguring vservice, will get rid of this mismatch issue.
2. Toggling the port-profile should also work.
I see couple of other DDTS as well related to this and i would suggest to ask this question in "Other Data Center Subjects" forum for detailed and quick answer.
CSCtz36835 :Config mismatch on VSM and Vpath after deleting service vlan
Regards,
Kanwal
Note: Please mark answers if they are helpful.

I suffer from the problem of cutting picture and sound when Link Mac Pro with the TV via the Apple TV Is there a solution to the problem

Have trouble cutting (the delay) picture and sound when Link Mac Book Pro with the TV via the Apple TV Is there a solution to the problem.
(this problem is when I follow films in the sites and forums or watch the live broadcast of certain programs by using the browser Safari)
I want a solution TV Apple made meI feel disappointed

Has anyone else encountered or solved this problem? Same thing is happening for me with a new MacBook Pro, 13" i7 and an Echo Audiofire 4. It's not even clear to me from searching if this is the processor idling or the firewire port hardware. Only thing clear to me from testing is that it does have something to do with using an audio interface - I don't get this noise plugging in my external hard drive, but I still hear it if I daisy-chain the hd through my interface. Any help or recommendations appreciated - do pc firewire ports have this issue too?

Contrast mismatch between Organizer and Editor

I can edit an image in Editor to where it looks great, to include the contrast, brightness, shadows, etc. When I send it back to the Organizer, it look much too contrasty and dark. When I use the same images in a slideshow originating in Organizer, they still look too contrasty. Is there a way to correct this? I'm using PSE 10 on a Windows 7 -64 bit machine. Thanks for any ideas.

Thanks for your quick response. I just checked out the settings in both the Editor and Organizer and they're both set on "let me decide". I'm not sure what to do on that one. I could go with optimizing the computer screen with sRGB, or the Adobe RGB for the printer, or no management, or decide on the fly. If I go with the computer, I guess I'd have to change it when I print a photo out, and vice versa. Have any suggestions for me? Thanks again.
New update. I have a Dell color laser printer, and I just checked the manual. It offers both sRGB and AdobeRGB. My priority is really to have a good printout. If I check sRGB I should be safe for either print or computer, but I'm wondering if I'd get as good a printout with sRGB as with AdobeRGB. The easiest might be to see what the printer is curently set on, and then set PSE Organizer and Editor to match it. I'll do that, and then see if that helps the mismatch between Organizer and Editor.

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Why is the picture and sound out of sync when i download my videos from iphone 4s

Why is my picture and sound out of sync in my videos when I download them from my Iphone 4s?

please share your advice. maybe no-one else replied because they didn't have an answer? by solving the problem yourself, and then sharing that information, you can help many other users overcome the same problem. welcome to the helpers club!

Equium A110 - DVD picture and sound appear to choppy & scratchy

Hey guys, for the last couple of days when i insert a dvd/cd into my laptop and try to play it, the picture and sound both appear to choppy and scratchy. also when i try to copy and burn a dvd, it takes an eternity(2-3 hrs) whereas before it barely took 15 minutes.
Is there any way to correct such a problem?
And another question, I may want to try and restore the laptop to its "factory settings".
Anyone know how to do it?
Regards m1lz

> I may want to try and restore the laptop to its "factory settings". Anyone knows how to do it?
If you want to set the notebook to factory settings you have to recover the OS from the delivered Toshiba Recovery CD!!!! But be careful, the recovery procedure erases the whole HDD. Create a backup before start the installation from the recovery CD
Now something about the sound and video issue:
Maybe the ODD malfunctions, this is not impossible but improbably.
You notebook supports acoustic silencer application try to remove it.
But after recovery installation everything should run correctly... hopefully ;)

Qosmio G50-10I - No synchronization on TV between image and sound

My problem is that there is no synchronization between image and sound (+the sound is late about 5 seconds+)
when i watch TV on Windows Media Center on Qosmio G50-10I
I tried to change the settings on Windows Media Center but some will be escape.

How did you connect this TV to the G50?
Do you use the HDMI cable which provides the audio and video signal together at the same time or did you connect the TV with two different cables (for audio signal & video signal)?
Please check additionally the settings in Realtek HD audio manager which can be found in the control panel. There you can change some sound effects for different audio outputs (HDMI, digital, speakers)
PS: Last but not least install some codecs. I recommend a package called K-Lite Mega codec package

Data mismatch between TABLE and Std. Extract str. (AFPO & 2LIS_04_P_MATNR)

Hi,
I am getting data mismatch in ECC standard table and ECC standard extract structure. Please help me.
I am using 2LIS_04_P_P_MATNR data source (standard extract structure).
I have following data in ECC Table (AFPO - Order Item).
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 0
PSMNG (ORDER QTY) --> 2000
Extract Structure is showing following data.
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 2000 (It should be zero)
PSMNG (ORDER QTY) --> 2000
I have checked with many other order numbers. The extract structure in RSA3 is showing correct values only if PGMNG is non-zero values. If PGMNG is zero, then it is automatically assigning PSMNG value.
Is this common? I want to display correct values for PGMNG from AFPO Table. Why this mismatch between table data and extract data. I have done all required steps refreshing data (deleting setup tables, filling set up tables etc.).
pls suggest. Poinsts will be assigned to every useful answer.
Thanks in advance.

Hi Avneet,
I have a similar problem where in AFPO shows value 1000 in PSMNG field and 1200 in RSA3 for extractor 2LIS_04_P_MATNR.
I have found that the standard feature of the extractor extracts the data at the time of release of process order. If the process order is changed after the release then the extractor will not picup the chagne.
Ex: AFPO value 1000 ---BI Value 1000
Now released in ECC
AFPO value 1000 ---BI Value 1000
In ECC value changed to 1500 after the release. BI will not pickup the change.
Extractor is pulling the data from MCAFPOV table. You can check the values, there it matches with RSA3 values.
I was just going thru forums for the solution. After i found the solution. I am just updating it.
Hope it helps you.
Thaks
Srikanth

DataSource / Structures mismatched between Dev and Test Systems. ..!!

Hi,
We are doing a scenario. Where XI will update the data into PSA through ABAP proxy.
Scenario worked perfectly in development system.
We transported the objects from Dev to test. The Strucures are mismatched in SE11 between development and Test systems as below.
Data sources (ZDS_RECIHDR and ZDS_RECTPALL) looks ok. But when I saw the structures in SE11 they are not correct, they got mismatched.
Development:
/BIC/CQZDS_REC00001000 - Header (ZDS_RECIHDR)
/BIC/CQZDS_REC00003000 - Allocation (ZDS_RECTPALL)
Test:
/BIC/CQZDS_REC00001000 - Allocation (ZDS_RECTPALL)
/BIC/CQZDS_REC00003000 - Header (ZDS_RECIHDR)
Kindly let me know where it might have gone wrong?
Thanks
Deepthi

We done it already. Still it is failing.
While transporting, it is failing and showing the error as
Program ZPI_CL_IA_PAYMENT_ALLOCATION1=CP, Include ZPI_CL_IA_PAYMENT_ALLOCATION1=CM001: Syntax error in line 000016
The data object 'L_S_DATA' has no component called'/BIC/ZSALENUM', but there is a component called
Program ZPI_CL_IA_PAYMENT_HEADER======CP, Include ZPI_CL_IA_PAYMENT_HEADER======CM001: Syntax error in line 000016
The data object 'L_S_DATA' has no component called'/BIC/ZTRANDATE', but there are the following com
The Structure is mismatched in SE11 between header and allocation structures. That is the reason it is failing.
Any more ideas pls?

PPDS production order dates mismatch between APO and R3

Hi Friends,
We are facing one problem regarding production order date mish match between R3 and APO systems specific to a product.
The product is planned in PPDS and the order automatically transfer to R3 through online CIF.
PPM has got two operations 0010 and 0020 and activity relationships are like this:
P(0010) - P(0020) Start - Start relation ship
S(0010) - P(0010) End - Start relationship.
In PPDS dates are shown as :
on operation 0010 the start/end dates are shown as 08.15.09 to 08.22.09
on operation 0020 the start/end dates are shown as 08.15.09 to 08.22.09
Overall order start date is 08.15.09
Overall order finish date is 08.22.09
and in R3 dates are shown as:
on operation 0010 the start/end date are shown as 08.15.09 to 08.22.09
on operation 0020 the start/end dates are shown as 08.22.09 to 08.29.09
Overall order start date is 08.15.09
Overall order finish date is 08.29.09
The order is off one week (APO vs R3) with start and finish dates.
if we change DS Board settings to ignore internal relationships manually then the dates are matching exactly in APO and R3.
We want the production order dates to be matched without manual intervention.
Could some one please provide some hints on what is happening here and how to correct it.
Thanks.
Krish

Hi Friends,
Thanks a lot for your valuable replies in this regard.
Actually this problem is in production environment and it took some time to test the problem with the master data modifications
you suggested.
As DB and Siddhrath mentioned, the problem was with routing definition. There is no parallel sequence maintained in the routing but there is start-start relation maintained in APO PPM.
We corrected the routing definition and checked the order dates. Now the dates are matching in R3 and APO.
I am awarding DB and Siddharth each five points in this regard.
Once again thank you all for your time and valuable replies.
-Regards
Krish.

Timing mismatch between picture and sound.

Similar Messages

Maybe you are looking for