Timing parameters missing

I am trying to use Motion for the 1st time to do some re-timing. The tutorial shows Inspector>timing>speed (and other parameters as well.) The only 3 parameters available to me are "in" "out" and "duration." Do I need to do something to turn on the other parameters shown in the tutorial? (Like speed, reverse, Frame Blending, and End Condition.)
I am using Motion 3.0.1 Academic. I start class in 4 weeks but want to work now. I have searched the web and the manual with no luck.

I did have what I thought was the clip selected, however, I didn't notice the sideways triangle next to "group1". (a thumb of my clip was showing.) I clicked the triangle and my clip appeared below...I selected the clip and presto! The rest of the properties appeared.
Thank you so much Mark! I was looking for something obvious, just thought it would be a bit less obvious than that.

Similar Messages

Error :Required parameters missing when calling up module MARC_SINGLE_READ

Dear all,
When trying to do the production order confirmation i am getting the error "Required parameters missing when calling up module MARC_SINGLE_READ".How can this error be solved?
Thanks,
Kumar

Hi
Please activate the corresponding programs again. I think you got a short dump for this error, if yes, you can see the program's name there.
Best Regards.
Leon.

Is timed recording missing from CS5.5?

Is timed recording missing from AA CS5.5? I use this feature frequently. If it's called something else now, I'd like to know what. If it's not in CS5.5, then I fill out a feature request.
J. D.

I'm pretty certain I remember reading on the list of features not included that this is one of those!
Jeff

[svn] 3151: Fix for bug SDK-16761 - Method parameters missing from generated document

Revision: 3151
Author: [email protected]
Date: 2008-09-08 21:30:07 -0700 (Mon, 08 Sep 2008)
Log Message:
Fix for bug SDK-16761 - Method parameters missing from generated document
Bugs: SDK-16761
QA: Yes
Doc:
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16761
http://bugs.adobe.com/jira/browse/SDK-16761
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

Hi,
Can you try putting the declaration of the URLLoader instance
outside your fetchISSN function and see?
That is:
var loader;
function fetchISSN(myform) {
//your code above this line
loader = new URLLoader();
//rest of your code

Web Service Export Parameters missing when consumed by Visual Studio 2005

Hi,
I am using Visual Studio 2005 (2.0 framework) to consume bespoke SAP Web Services (SAP 4.7) however some of the export parameters are missing. I have tested the SAP web services with various XML tools and they all work perfectly.
Is there anything I can do to enable Visual Studio to genarate the correct proxy?
Many thanks for any tips.
Billy

This isn't going to work as well as I had thought.
That is correct that the Name and Value fields come back as XmlNode arrays. Each XmlNode array contains two XmlNode objects (or one if you received a null value from the db). One object contains the atrributes and one contains the value. I had planned on going into the ColumnValueType Value field and pulling the text of the 2nd XmlNode object.
Now here is the problem:
For every column you select you get a ColumnValueType object. Rather than being contained in some type of "Row" parent object, each column sits in the root of your results. For example, in the query I am using I am asking for the AlertingName and DnOrPattern columns of the NumPlan table. My results come back like this (simplified):
AlertingName
John Doe
DnOrPattern
1234
With the data in this format, I can't just do a foreach loop and iterate over the ColumnValueType objects.

Essential Transfer Parameters Missing in record during Inbound IDOC process

Dear Gurus
We are creating a Inbound delivery in one system, we have made all the custom settings for IDOC processing for inbound and outbound idoc in both the systems. Upon the execution of inbound delivery, the system
During the Inound delivery processing, the outbound IDOC is successfully distributed. However in the receving system, the IDOC is not posted and it throws the below erroe\r
Essential transfer parameters are missing in record: 0180000055 000010 / Mess number 561 and message type E
We are using Outbound IDOC mess type DESADV basic type DELVRY01 process code DELV with FM IDOC_OUT PUT_DELVRY
In the receiving system message type DESADV , process code DELS, and FM IDOC_INPUT_DESADV1
What is that which is going wrong.
Please help me out
Thanks

Hello
To create inbound delivery from outbound delivery, use following setting -
Outbound idoc -
idoc type - DESADV01
message type - DESADV
Process code - SD05
FM - IDOC_OUTPUT_DESADV01
Inbound iDOC -
Message Type - DESADV
Process Code - DESA
FM - IDOC_INPUT_DESADV
Idoc Type - DESADV01

Essential transfer parameters missing while GR into a HU managed Sloc.

Hi Gurus,
I am doing GR into a HU managed storage location. I am expecting the system to create an inbound delivery & HU internally. But the error is
"Essential transfer parameters are missing in record: 45000XXXXX 000010 Message no. VL561".
in IMG-Shipping I have maintained "Assign Goods Receiving Points for Inbound Deliveries". I dont know whether Packing instruction determination is necessary for this, but I have done that also.
Please let me know where I am missing
Nagesh

Hi,
That's new for me. What is then the use of the inbound delivery if you do the GR on the PO with MIGO?
Standard process:
GR on PO through MIGO
GR on inbound delivery through VL32N or MIGO (or VL36/ BORGR).
Required for usage of inbound deliveries:
confirmation control key in the PO (defaulted through vendor) which requires an inbound delivery.
MdZ

I2C Digital Waveform Library Timing Parameters

Does anyone know how the cluster of "I2C Timing (ns)" is being done in the following code? It is an abridged version of the example VI "HSDIO I2C - Hardware Compare.vi" downloaded from here. It uses the I2C Digital Waveform Reference Libarary.
The time on the X-Axis does not seem to be any help, and the front panel parameters are very cryptic in their naming system. Does anyone know what all those numbers mean and how it correlates to the actual times (dt) between each point?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If someone helped you out, please select their post as the solution and/or give them Kudos!
Solved!
Go to Solution.

I finally found where the parameters are specified. They can be found in the UM10204 I2C-bus specification and user manual.
Under the current revision 5, it is found in Table 10 on page 48:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If someone helped you out, please select their post as the solution and/or give them Kudos!

Create delivery in subcontracting - Essential transfer parameters missing

Hi Guys,
This is my first thread - I hope I get everything right
From ME2O, stock monitoring for Vendor (subcontracting), I want to create a delivery to the vendor. After checking a material with a requirement and pressing "Create delivery" I get a box containing:
Vendor:
material:
Plant:
Shipping Point:
Stor. location:
Batch:
Quantity:
All fields are predefined and filled except "Shipping point". It's grayed so I can't search/enter it manually. I have assigned a loading group to the material in the Material Master: Sales: General/Plant. So where does this (missing) value come from if not the loading group?
Hoping for an answer
/Thomas

Hi Thomas,
The shipping pt has to maintained in customizing
spro>logistics execution> shipping>basic shipping fns>shipping pt and GR pt determination
maintain the shipping pt here for your plant and try again.
Hope this helps
regards
Anand.C

Component Inspector Parameters Missing

When I launch the Component Inspector for a Multiple Choice
Interaction, there are no parameters listed under the Parameter
tab. I am used to MX2004, where there was a table and I could fill
in all my values for questions, answers, etc. But now I'm in Flash
8 and that grid isn't there. When I click on the Parameter tab for
a Component Inspector it is a blank slate. Can anyone help? I'm
guessing there is some trick for me to see the fields that I could
so easily fill in with MX2004?
Thanks,
Lauren

Thanks. I expected such answer. But didn't expect Adobe made it silent. I hoped they at least explained something. And what component inspector panel does now? Nothing? Why then Adobe left it... I remember good times with Macromedia...

Parameters missing LOVs

Hi,
I've an issue that seems to be isolated to Plus/Viewer. We've a new set of reports in our production environment that run perfectly when executed in Desktop. However, when attempting to run in either Plus or Viewer, some parameters are not retrieving LOVs. On clicking the flashlight, an error message 'There are no values for .....' appears.
As a process of elimination, I've logged on with two different IDs; one works fine and the other doesn't. This suggests to me that it's security related.
Any ideas will be greatly appreciated.
Thank you.

Hi,
you already mentioned that it seems to be user related. What is the difference between the two different user accounts? Do they have different respos and maybe with this they have different access to Business Areas? Check the security settings of the business area of the folder and the item class. Most probably one user has privileges to access it, the other user not.
regards,
David.

Exchange profile parameters missing

Hi All,
To be able to use CMS for repository and directory objects the following parameters must be set to true in the exchange profile
com.sap.aii.ibrep.core.cms.enableClTransport=true
com.sap.aii.ibrep.core.cms.enableTransportWizard=true
com.sap.aii.ibdir.core.cms.enableTransportWizard=true
I can NOT find these parameters in the exchange profile...... Strange
Does anybody knows this problem and can i find these parameters on another place... where
cheers
Richard
ps we use version PI 2004S SR2

Hi
Did you check this blog>?
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
Looks like you need to manually create that parameter
regards
krishna

Batch job print parameters missing

I have 4 BATCH jobs that output to a pdf via MAIL. The data is shrunk so small that it cannot be read. If I am in SP01, and I try to reprint with changed parameters, only a select few formats are available. (All the ABAP/4 lists).
I went to SPAD -> Full Administration -> Device Types -> Choose the device type -> Formats
I see the the output DEVICE associated with MAIL is PDF1. I checked the formats that are already listed. It seems that some of these will suit my needs - however, most of them are not available to choose when I edit the batch job.
How can I add a different format? I need to test several to find a size that will accommodate a very wide table.
All suggestions welcome.
Thanks!

It's pretty huge. Columns A-W. The length varies, but this week's was 195 rows. I tried to create a new format, but I supposed it will never fit on a normal sheet of paper.
Is it possible to "print" to an Excel file from a batch job?
Right now, I am going back into SP01 and downloading to excel and emailing it out.
Think this can be automated?
Thanks for your input

RFC export parameters missing

Hi all,
My scenario is SAP 4.6 RFC to XI 3.0 to SAP 4.6 RFC...I created function Z_SEND_PCARD_PAYMENTS in 4.6 with export and table parameters....Imported this into XI...Setup messages, interface mappings, etc...When I execute RFC (async) using dest XI and look at XML monitor....I see only my table parameters....My RFC export parameters do not show in the payload....
Thanks,
Wiley

Hi,
import parameters in the RFC
are EXPORTING (not export)
parameters in the calling program
>>>Setup messages, interface mappings, etc...
did you define messages in XI for request RFC or response?
(it should be for request)
EXPORTING parameters from your abap report are
import parameters in th RFC and these are request RFC messages in the XI repository
at least that's how it works for me:)
Regards,
michal

APS_PARAMS parameters missing in Demantra 7.3.1

The performance parameters 'worksheet.full.load' and "client.worksheet.calcSummaryExpressions" are not available in APS_PARAMS table in Demantra version 7.3.1 The release notes don't mention any changes to these two parameters in 7.3.1. Are these parameters are deprecated?
Thanks

Loading some Customer Sample Data into a new model (not the preseeded one as Customer has no EBS nor JDE).
After Build Model run I got an error in BM : Cannot insert NULL into LOC_LEVELS.ENGINE_PROFILES_ID.
It never occurred to me in previous versions.
What can I do?What is the difference between this version and the previous one?
From the error message, it looks like you are trying to insert NULL values in one of the columns/fields which is mandatory and expect some value to be inserted.
Thanks,
Hussein

Timing parameters missing

Similar Messages

Maybe you are looking for