Timing problem between XPS 14.4 x64 vs x86
Hello all,
I am using XPS 14.4 on a x64 machine and I have a design which is failing timing contraints. However, when using the same design on a x86 machine, I do not have the problem.
How is that possible? Thank you for your answers.
Kind regards
You could try to run the 32-bit version of XPS on the 64-bit machine to see if you get the same results. It's possible that there are differences in the random seed functions used for initial placement. I don't know if it's easy to change in XPS, because I've always used ISE as the top level design, but you could also try changing the cost table placement starting value (-t command line option for map). Running from ISE, I would normally use SmartXplorer to do this automatically.
Similar Messages
-
I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
What can I do??hi b noir,
I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use. Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
(the copie from ITunes shows the result of the not running CD from Tracy Chapman)
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater-Bibliothek 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Treiber 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes-Seriennummer 00D7B2B00CD25750
Aktueller Benutzer ist kein Administrator.
Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
iTunes befindet sich nicht im abgesicherten Modus.
WebKit Accelerated Compositing ist aktiviert.
HDCP wird unterstützt.
Core Media wird unterstützt.
Info zu Video-Anzeige
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** Info für externe Plug-Ins ****
Keine externen Plug-Ins installiert.
iPodService 10.3.1.55 (x64) arbeitet zurzeit.
iTunesHelper 10.3.1.55 arbeitet zurzeit.
Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
**** CD/DVD-Laufwerkstests****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: PLDS DVDRWBD DS-6E2SH, Rev CD11
Audio-CD im Laufwerk
11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
Titel 1, Startzeit: 00:02:00
Titel 2, Startzeit: 03:59:47
Titel 3, Startzeit: 07:19:27
Titel 4, Startzeit: 11:31:30
Titel 5, Startzeit: 15:31:50
Titel 6, Startzeit: 20:07:50
Titel 7, Startzeit: 24:27:15
Titel 8, Startzeit: 27:49:10
Titel 9, Startzeit: 32:41:25
Titel 10, Startzeit: 35:29:65
Titel 11, Startzeit: 38:38:00
Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
Laufwerksgeschwindigkeit erfolgreich erkannt
Die CDR-Geschwindigkeiten des Laufwerks sind: 4 10 16 24
Die CDRW-Geschwindigkeiten des Laufwerks sind: 4
Die DVDR-Geschwindigkeiten des Laufwerks sind: 4
Die DVDRW-Geschwindigkeiten des Laufwerks sind: 4
After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
best regards
tcgerd -
Sync problem between iPhone and iTunes (Music&Books)
Hello, I have a synchronization problem between the macbook and iPhone 5S. On the macbook I've Maverik updated and also the Iphone is updated.
First problem: the timing so long, especially at the step of applications, compared to when it was fast, applications have not changed.
Second problem: the music, I flagged "synchronizes the selected music" but all the flags on the selected artists are missing, despite what the music is on iPhone . I tried to flag again on itunes but all song was duplicate in Iphone.
Third problem: the books, it happens the same music.
The problem does not occur with the photo with the ringtones and videos.
I've tried everything from simple restart of the mac and the iPhone, checked and updated macbook, iPhone and itunes. Repaired permissions on the mac.
What can I do?
thanks
Bye
Ciao, da un po' di giorni ho un problema di sincronizzazione fra il macbook e l' Iphone 5S. Sul macbook ho Maverik aggiornato e anche il telefono non JB è aggiornato.
Primo problema: la sincronizzazione dura tanto, sopratutto allo step delle applicazioni, rispetto a quando era veloce le applicazioni non sono cambiate.
Secondo problema: la musica, ho flaggato "sincronizza la musica selezionata" ma sono spariti tutti i flag sugli artisti selezionati, ciò nonostante la musica è presente sull' iphone. Ho provato a riselezionarli e me li duplica tutti.
Terzo problema: i libri, succede la stessa della musica.
Il problema non si manifesta con le foto con le suonerie e i video.
Ho provato di tutto a partire dal semplice riavvio del mac e del telefono, controllato e aggiornato macbook, telefono e itunes. Riparato permessi sul mac.
Cosa posso fare?
grazie
ciaoThis knowledge base article may get you started: iCloud: Set up iCloud on your devices
These specific articles may be helpful as well:
Get help using iCloud Contacts
iCloud: Troubleshooting iCloud Calendar
Set up and use iCloud Tabs in Safari -
Communication problem between NetBeans and Tomcat
hi!
i got a quite mysterious problem. here is what happens:
- i start NetBeans 5.5.1 (the first time)
- i want to debug my JSF-Project, the Debugger starts
- After a few seconds the debugger waits for tomcat (it sais: "Waiting for Tomcat...") and tomcat starts
- Again after a few seconds the tomcat-debugger-output sais "Tomcat startet in 3333 ms".
okay.
when i enter http://localhost:8084/ in my browser i get the tomcat homepage, so the server has definitely started! But nothing happens in NetBeans and nothing happens with my project....
In the lower-right corner i see this blue working-bar that sais "deploying project" but nothing happens. The Project-Debugger-Output still sais "Waiting for Tomcat..." but nothing happens...
And after something around 3 minutes (i guess it's a timeout) i get the error "Starting of Tomcat failed." But is HAS started, i can login to the Administration-Area in my browser!
so i guess there is a communication problem between netbeans an tomcat. Netbeans waits for a message from tomcat but tomcat doesn't send it..or netbeans doesn't understand it.
But the story goes on:
When i press the debug-button a second time it takes only a few seconds till i get the message: "Tomcat server port 8084 already in use". OF COURSE! Because Tomcat has already startet and can't be stoped by NetBeans.
i'm trying to solve this problem for 4 days now, so i would be very happy if anyone has an idea where to start/continue the search...
thanks,
flo.
some system-info:
- windows vista business 32-bit
- no firewall is running
- AntiVir Personal Edition IS running
- Yahoo Widgets Engine IS running
- no other software is running
and finally the tomcat-log:
Using CATALINA_BASE: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base
Using CATALINA_HOME: C:\Program Files\NetBeans\enterprise3\apache-tomcat-5.5.17
Using CATALINA_TMPDIR: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base\temp
Using JRE_HOME: C:\Program Files\Java\jdk1.5.0_12
Listening for transport dt_shmem at address: tomcat_shared_memory_id
21.09.2007 18:27:50 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jdk1.5.0_12\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\Common Files\Teleca Shared;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\MySQL\MySQL Server 5.0\bin;C:\Program Files\cvsnt;
21.09.2007 18:27:50 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:50 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 1862 ms
21.09.2007 18:27:50 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
21.09.2007 18:27:50 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.17
21.09.2007 18:27:50 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
21.09.2007 18:27:53 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:54 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
21.09.2007 18:27:54 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/31 config=null
21.09.2007 18:27:54 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
21.09.2007 18:27:54 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3626 msAs i wrote before, the same problem occured for me. I have found a solution which is : Go to tools menu and then select options . In the proxy info, select No Proxy.
I hope this help you -
Problems between Xcelsius and WebDynpro for Java
How should I do to show Xcelsius in WebDynpro for Java?
How should I transport data between Xcelsius and WebDynpro?
How should I control WebDynpro with Xcelsius?For example,firing plugs in Xcelsius like in WebDynpro to change one view to another.
How should I do to execute a Java method in Xcelsius?For example,scheduling a job on clicking a button in Xcelsius.
Besides these,I also want to know the same problems between other BOE contents and WebDynpro for Java.
Regards,
AbeHi Pradeep:
Well that purely depends on the business application (project) your client is proposing. Following are very few factors which will drive for creating web-based applications:
VC: it's a UI modeling tool (non-programming) for creating rapid creation of web-based applications.
WD: its a powered by Java and ABAP with which you can create robust business applications.
If your client is very choosy about rapid application development, reporting, rich user interface, to reduce TCO then VC is the choice. Or if the project contains typical integration with SAP and non-SAP systems, complex business logic development, integration with WCM systems...etc then WDJ is the option.
If youve some sort of custom development with facilitating the Development Infrastructure (NWDI) then WDJ is the only option I could say.
We hope with NW CE 7.1.1(referred by Priyanka Singh) tighter integration between these TWO tools may over come the ambiguity of using them.
Tnx,
MS -
do any of you experience Im having with my ipad? I can't make a comment in Facebook for older posts and I can't open numerous comments from old posts of my friends. but everything works perfectly when I use my laptop(non-apple). is there problem between apple and FB?
Facebook apparently has their site coded poorly for tablets with touch screens. Try using the Facebook app. It is not perfect either but it is better than view in a browser lately.
-
Hi,
I am having a sync problem between my iPhone/iPad and Outlook calendar events (Outlook 2010).
Here is the description of the problem:
1. In Outlook - please create a new event/appointment (e.g. "Test").
2. Reminder is set by default to 15 minutes. You can change it by using a dropdown menu - please select: "0,5 days".
3. Click on "0,5 days" and change it manually to "14,5 days".
4. Click on "Save & Close".
5. (Do not snooze or dismiss the reminder.)
6. Sync with your iPhone/iPad.
7. Open this new event on iPhone/iPad - you can see that alert is set to "15 minutes before" instead to a correct value that was set in Outlook.
The same problem can be seen if you set the reminder to e.g. "3 weeks" (standard value is "2 weeks").
However, it is interesting that non-standard values like "1,5 days" (and all other until "13,5 days") are synced without any problem.
Does anyone have a solution how to solve this problem (different than the trivial solution of not using those strange values)?
Thanks!Thanks to another post (https://discussions.apple.com/message/17501071#17501071) I reset the sync history, here is what to do:
Launch iTunes.
Before you hook up your iPhone to the PC and iTunes do this: Go to iTunes Edit menu > Preferences… > select the iPhone > click the Reset Synch History button > click OK.
Connect the iPhone to the PC and let iTunes recognize it.
In the top right corner is the iPhone icon, click on the left side of the iPhone icon > the iPhone menu launches.
In the menu along the top click on Info > make your selections > click Sync button > it gives you a dialog at the top with the steps it’s going through during the sync.
In the top left of the iTunes app > click Exit. -
I have connection problems between the mini ipad and my powerbook g4, you are not allowed to see or share applications.
That is not possible.
-
I have a drawing that was resized to a certain length using PE4. I have now upgraded to PE10 and when I print the drawing , it prints 3-4 times larger than what it should be. When I view the drawing, the ruler at the top of the screen shows it being the correct length and when I checked the deminsion in the resize box, it also has the correct length. Have I done something wrong or should I delete the drawing and start over from scratch?
Could you be a little more specific please? Sorry, I am not a tech guy just a poor laymen.
Date: Thu, 2 Aug 2012 20:30:55 -0600
From: [email protected]
To: [email protected]
Subject: Problems between PE4 and 10
Re: Problems between PE4 and 10
created by photodrawken in Photoshop Elements - View the full discussion
Check your PSE print settings, especially the DPI value in the "Print Quality". Ken
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4595437#4595437
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4595437#4595437. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Problem between SOAP Sender and JDBC Receiver
Hi,
I have a asynchronous scenary between SOAP Sender and JDBC Receiver.
The idea is sending an ID for updating one register.
Table structure is:
TABLE AS_PERSONA
(P_RUT VARCHAR2(10) NOT NULL,
P_NOMBRE VARCHAR2(50),
P_APELLIDO VARCHAR2(50))
The ID is the P_RUT field.
The structure of message that I send by SOAP, is the following:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<SOAP-ENV:Body>
<m:MT_CONS_SOAP xmlns:m="urn:prueba:voliva">
<CONSULTA>
<P_RUT>15445</P_RUT>
</CONSULTA>
</m:MT_CONS_SOAP>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The JDBC receiver structure is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_CONS_PERSONA xmlns:ns0="urn:prueba:voliva">
<Statement>
<AS_PERSONA action="UPDATE">
<table>AS_PERSONA</table>
<access>
<P_NOMBRE>DELETE_BY_XI</P_NOMBRE>
<P_APELLIDO>DELETE_BY_XI</P_APELLIDO>
</access>
<key>
<P_RUT>15445</P_RUT>
</key>
</AS_PERSONA>
</Statement>
</ns0:MT_CONS_PERSONA>
When I do a call to SOAP by XMLspy, it returns a message without data, that means succesfull reply.
I see message monitor and see the succesfull flag. But in the database it doesn't update the register.
This scenario was proved using the File Sender and same JDBC Receiver, then result was succesfull.
I proved SOAP Sender with a File Receiver, storing information from SOAP sender in an archive, and works well.
Then I imagine that exist some problem between SOAP and JDBC. what could be happening ?
Thanks.Hi,
Looks like the problem is with the JDBC receiver...try updating the value in the table by using a File-JDBC scenario..does it work..check the adapter monitor in RWB..
Regards,
Sushumna -
Can anyone help me with Labview/GPIB timing problems?
I am trying to use a very simple VI (downloaded from the NI site) to control a Newport 1830C optical power meter.
I have been spending most of my time trying to use the VI issue a command to read the current displayed power. When I run the VI normally, I get no response from the meter, and the VI simply terminates without any error message. (The "remote" indicator does light on the meter, though, so it seems to be receieving the command.)
However, when I run the VI in the "highlight exectution" mode, everything seems to work just fine, and I receive a correct reading from the meter! Needles to say, this makes it really hard to debug the problem.
My guess is that I have some kind of timing problem, and t
he "highlight execution" feature fixes it by introducing delays. Is this correct? If so, how can I achieve the same thing by putting in delays by hand?
thanks, Whitney WhiteWhitney,
I agree that this is very likely to be a timing issue. VIs run much slower in highlight execution mode, therefore your instrument may need more time to prepare the data you have requested. Try wiring a delay inline prior to the GPIB reads and/or writes, or try using Service Requests (SRQs) to give the instrument enough time to generate the data it needs to send back to the computer.
Another possibility is that your instrument may not be IEEE 488 compliant. Some older instruments indicate that they are ready to receive data before they really are. Try changing the GPIB bus timing to the slowest setting (in the GPIB Configuration Utility). This only affects the time that the GPIB controller waits before valid data is on the bus and the DAV line i
s asserted (a step in the GPIB handshaking that occurs each time a byte of information is sent to the device) so this may not be effective.
Lastly, you may wish to try the instrument driver for your instrument. There is a contributed driver at this location: LabVIEW Traditional Instrument Driver: Newport Optical Power Meter 1830C. A 'contributed driver' means that someone outside of National Instruments wrote the driver and then submitted it for posting. This driver also contains a good example of adding a time out.
Regards,
Heather S.
Applications Engineer
National Instruments -
Compatibily problems between flash media live encoder 3 and fms version 2 ?
hello
i am trying to setup a stream for a live event we plan
for this we want to use our "flash media server v. 2.04" and
to encode the video the
"flash media live encoder 3"
but im really shocked about the poor quality - actually its
not working
the video is freezing for a while an then playing back very
fast and then freezing again
and the audio is stuttering
i tried propably all kinds of combinations of the settings
without any success
very often the encoding session is being stopped and started
again with the following
error message:
Fri Mar 13 2009 05:02:22 : Audio Encoding Started
Fri Mar 13 2009 05:02:22 : Video Encoding Started
Fri Mar 13 2009 05:03:09 : Unexpected error encountered in
encoding process.
Fri Mar 13 2009 05:03:10 : Audio Encoding Stopped
Fri Mar 13 2009 05:03:10 : Video Encoding Stopped
Fri Mar 13 2009 05:03:10 : Session Stopped
Fri Mar 13 2009 05:03:10 : Session Started
Fri Mar 13 2009 05:03:10 : Audio Encoding Started
Fri Mar 13 2009 05:03:11 : Video Encoding Started
and the media server says:
Sending error message: Method not found (FCUnpublish).
Sending error message: Method not found (releaseStream).
sometimes it restarts only the audio encoding
the machine for the streamingserver (windows version) is
realy strong an has a very fast
internet connection
the encoding machine is a 2.2ghz macbook pro with windows xp
and 6000 dsl connection
with the low bandwidth factory setting of the flash media
live encoder the cpu usage is
about 16%
for the videoinput i want use a canopus ADVC-110 firewire
capturedevice
but i also tried the apple isight usb 2.0 laptop-camera and a
logitech quickcam express
usb 1.0 webcam
all with negative results
two colleques encountered the same problems on their machines
but when i upstream the video with an standart flash client
the videostream runs stable
without any problems
so i guess the problem is the flash media live encoder
is there a compatibily problem between the server version and
the encoder version ?
thanks in advance for any hintsHi,
FMS 2.04 version doesn't support H.264 and AAC/HEAAC. So, you
can only use Vp6, Mp3 and Nellymoser codecs in FMLE for streaming
to this server.
You are getting "Unexpected error" message within 50 sec of
your encoding session. This error occurs when either of the video
or audio device doesn't function properly. As you have mentioned
that various video devices gave negative results, try to use a
different audio device or uncheck the 'audio' device option and
encode only video.
Exactly what was the nature of the negative results for
different video devices? Was it the same "unexpected error"
problem? Please share the steps, device and encoder settings also.
When you observe video freezing and audio stuttering problem
while playback, reload the flash player and let me know if you
still see the same problem. -
Externalizable problems between v1.3 and v1.4
Hej you.
I have strange problems with the Externalizable objects.
I Use many Object to Save my file, but wien i try to Externalizable on J1.3 and Denalizable again in J1.4 I got this message:
E:\Programmer\Java\ProrgamName>Java ProrgamName
javax.swing.JInternalFrame; Local class not compatible: stream classdesc serialV
ersionUID=8792953236056021037 local class serialVersionUID=-6387351733537024688
Can i trap J1.4 ID to use 1.3 ID, so it can use on ALL platforms, not just locally?
When I Save and load on the same machine it works fine, but not when i moving to another machine with 1.4. Is a another method, or i Need to save all object to AscII instead in this smart method (that are poorly work)? I have surfed around javasoft.com with finding a answear.
See my early quenstien on (closed):
http://forum.java.sun.com/thread.jsp?forum=31&thread=273990
With very regaards By:
Super Bomba, Denmark
PS. No Duke Dollars this time. Sorry.Hey.
I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
Use follow code (I using Externalizable):
protected DefaultMutableTreeNode rootNode=null;
protected DefaultTreeModel treeModel=null;
public void writeExternal(ObjectOutput stream) throws IOException
{ stream.writeUTF(rootNode.toString());
Vector values = new Vector();
Object root = treeModel.getRoot();
// Save the root, if its Serializable.
if(root != null && root instanceof Serializable)
{ values.addElement("root");
values.addElement(root);
stream.writeObject(values);
public void readExternal(ObjectInput stream) throws IOException
{ thisModel.removeAll();
thisModel.setVisible(false);
try
{ String title=stream.readUTF();
rootNode = new DefaultMutableTreeNode(title);
Vector values = (Vector)stream.readObject();
int indexCounter = 0;
int maxCounter = values.size();
treeModel = new DefaultTreeModel(rootNode);
if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
{ TreeNode root = (TreeNode)values.elementAt(++indexCounter);
treeModel = new DefaultTreeModel(root);
indexCounter++;
// kode for setting the tree start here
catch (ClassNotFoundException e) {}
}Hope, this is to use :-)
Hi from
Super Bomba -
I used to be able to print correctly using Firefox as my browser,but something changed in the last month or so,possibly after a Firefox update. I`m not really sure how it happened but there seems to be a problem between Firefox and my printer. So I have been using Internet Explorer as my default so I can print. I would prefer to use Firefox again since that is where my bookmarks are. Is there a way to get the connection between Firefox and my printer back?
'''Save as''' = sounds like you don't have your printer selected, or you have ''Print to file'' selected
http://kb.mozillazine.org/Problems_printing_web_pages -
NFS problem between RedHat Client and Solaris Server
Hi all, we are experiencing a problem between a RedHat client and a Solaris 10 server. For the purposes of this post, I'll call the Redhat client server A and the Solaris 10 server B.
Server B is exporting a filesystem that server A is trying to mount. Server A can successfully mount the exported file system, however, strange things are happening. If I change to the exported mount point on server A and create a file, the file is owned by nobody:nobody, not the user that created the file.
A look at the file on server B shows the file has the correct UID and GID (ie the UID & GID of server A).
The fstab file on server A looks like this:
serverB:/data /data nfs4 rsize=32768,wsize=32768,hard,nointr,rw,bg,actimeo=0,timeo=300,suid 0 0
Does anyone have a explanation for this?
NB: There is a firewall between server A and server B. A firewall rule is in place to allow traffic between the two servers on port 2049
StewartHi
If I change to the exported mount point on server A and create a file, the file is owned by nobody:nobody, not the user that created the file.On a NFS share, for security reasons, you normally dont have root provileges.
A file createt as root user will be mapped to nobody:nobody.
The behaviour you see is correct.
If you want the file to be createt as root, you have to export the filesystem with -o ro,anon=0
NFSv3 will be blocked by your firewall.
Franco
Maybe you are looking for
-
Is there a way to control bones in swf?
Hello, In Flash cs5, can i publish a bone structure, and control it in the swf? Thanks.
-
Price unit field in material master
Hi all, Could you please tell me the use of price unit field in accounting view of material master? I know that it is the unit in terms of which standard price is maintained in material master. I also know that it should be equal or less than costing
-
Using an external HD for my library
My laptop's 60 GB HD is full with my library. I have the whole library backed up on an external HD, how do I make iTunes reference the external HD for my library?
-
Business Rules Web Launcher error
All, EAS version : 9.3.1.3 Business Rules version: 9.3.1.1 Accessing EAS web is working fine. Getting the following error when I am trying to use Business Rules Web launcher An error occurred: Login Failed. Please login again. Error Message:Error log
-
"Unable to download" error in iTunes iPod touch 5G
I began to download a song, and suddenly an error came up saying it was unable to download. I tried resetting my iPod, sliding from the left, and the right to delete, nothing worked. Please, help! I am on iOS 7.0.4, if that helps. Thank you!