Tinny-sounding music during slideshow playback on TV

I have created slide shows with special effects and music.  The shows play back perfectly on my imac, laptop, and ipad.  However, when I attempt to play the shows on my TV, some of the music sounds very tinny.  What causes this, and how can I remedy the problem?

If you want the visualizer to play druing the music just trun it on... be sure to set the tv screen up as the screen to use for iTunes.

Similar Messages

  • Can't save "Play music during slideshow" setting in iPhoto 6

    Hi,
    I just bought and installed iPhoto 6 today as an upgrade to iPhoto 4. I've discovered that I'm unable to save the "Play music during slideshow" setting in the dialog which appears when I click the "Play" button from the thumbnail screen to play a slideshow. If I uncheck this checkbox and then click on the "Save Settings" button, the next time I play a slideshow, the music starts up again. The most particularly annoying thing about this problem is that I'm trying to create a slideshow that plays no music, and I have to continually uncheck the "Play music during slideshow" checkbox each time I play the slideshow. Has anyone else run into this problem, and is there a solution or workaround for it?
    Thanks,
    Ken

    Hi,
    I think I've figured out what's going on here, but I don't know how to fix it. While I was playing around with the items in the "Play" dialog that appears when you initiate a slideshow, I discovered that if I uncheck the "Play music during slideshow" and then change the selection in the tree of folders underneath the checkbox, that the checkbox becomes selected. This would normally be the considerate thing to do, since if the user were making a selection in that tree, it would be rather "rude" in a software sense to not check the checkbox automatically. Unfortunately, in this case, the logic doesn't seem to be looking at the Preferences flag which (correctly, I think) is remembering that I don't want music to be played. So what I think is happening is when this dialog is first instantiated, the checkbox setting is remembered correctly. However, what happens next is that the saved selection in the folder tree is then restored, which then triggers the "a tree selection was just made, so let's check the checkbox" event. This is why if you've saved the "don't play music" setting, the checkbox is initially cleared, and then when the tree selection is set, the checkbox becomes checked. If I save the settings with the checkbox checked, the checkbox is set from the instant the dialog appears. So assuming that this is what's happening, is it possible to fix this by editing the NIB file using the Developer Tools? Or is this logic embedded in the compiled code?
    Any suggestions would be appreciated.
    Ken

  • How can I get the info off the top of screen during slideshow playback on 7d

    Subject says it all.  I have a 7d and want to play slideshow through the camera up on screens without the info across the top.  No the info buttin does not help.  My older rebel does this no problem.  YES I can shoot on 7d but playback through rebel but thats dumb.  Help please.

    I have had the same problem. I solved it by disconnecting the the cable and then using the info button to clear the info from the rear screen. When I re-conneccted, the TV screen was clear during slideshow. 
    There might be an easier way, but I haven't found it. 
    Mike Sowsun
    S110, SL1, 5D Mk III

  • Request: Option to Suppress Reminders During Slideshow Playback

    Keynote Team,
    Could we have an option to suppress calendar reminders when in slideshow playback mode? I was doing a presentation with the VGA out tail, and a calendar reminder popped-up. It dropped the video connection (good idea, thanks), and it put-up the reminder, and I had to restart the slideshow manually after clearing the reminder. It completely broke the flow of the presentation and my concentration. An option to suppress reminders while in playback would be great.

    This is a user-to-user forum. If you want to make sure your suggestions actually get read by Apple, use the links on this page:
    http://www.apple.com/feedback
    Best of luck.

  • Freezing with iTunes 7.6.1, thumping sound,especially during video playback

    Hi,
    Has anyone noticed a decrease in system reliability after upgrading to iTunes 7.6.1, especially during video/videopodcast playback in iTunes on their MacBook Pro's?
    Specifically, the entire system locks up. Reminds me of the days of OS 7.5.5 when the mouse cursor freezes, keyboard stops responding. The only way to proceed is by holding down the power button.
    This has occurred about 4 times now. The trackpad will become unresponsive, keyboard buttons such as caplocks and nu lock will be unresponsive too. Most interesting is that the sound output will loop, usually a short bit of the last audio played back over iTunes.
    Videos which have triggered this:
    - Podcast: Diggnation
    - Podcast: ABC World News Now
    - YouTube video's converted by Tooble
    Here's a video I recorded showing the thumping noise. It sounds like the last audio dump before the crash looped. It's not coming from the hard drive. Definitely from the speakers.
    http://www.youtube.com/watch?v=wzOCcINoClg
    In the video you see I had World of Warcraft up, but I don't think it is the problem, because this kind of crash has occurred while using other programs.
    Details:
    iTunes 7.6.1
    QuickTime 7.4.1
    Mac OS X 10.4.11
    2.2 Ghz (MacBookPro3,1)
    4GB RAM
    External second monitor attached: eMachines 15" LCD
    Prefrence panes additions: Application Enhancer, Divx, FinderPop, Flip4Mac WMV, Perian, Teleport, WindowShade X.
    Have NOT installed Security Update 2008-001 OR AirPort Utility 5.3.1 pending user problem reports.
    I never had such a complete system freeze until about the time I updated to iTunes 7.6.1. Repaired disk, permissions, cleaned up virtual memory, cache's using AppleJack.
    Thanks, just want to see if this is an isolated problem.

    First, create a new user account and see if you can replicate the problem on that account.
    If so, start by killing all the running daemons that aren't OS X-native apps. In other words, Window Shade X, Application Enhancer, divx, etc. Quit all that junk and use Activity Monitor to make sure those apps aren't running background tasks. I'd be willing to bet that Application Enhancer is the culprit.
    See if that solves the problem. If so, you can add the applications back one by one until you find the one that's causing problems.

  • Front Row 2.0; no music during slideshow?

    Would I be right in thinking that Front Row 2.0 has removed the option of playing iTunes Music whilst viewing an iPhoto slide show?

    So I just have the same problem? Is thier anyone who has emailed Apple to see if they know how to fix this?
    I play a slideshow in iPhoto and all the iTunes that I have CHECKED and are in that playlist will play.
    However - in Front Row the same slide show that I created in iPhoto will not play any music. For some reason it used to play only ONE of the songs - which was the 1st song in the play list - and then it would repeat it. So me being me.. stubborn..I kept trying to get it to play all the songs in the playlist (by friggin with iTunes setting and iPhoto settings) and NOW I have no music what-so-ever, not even the sample music.
    Any one have any ideas? This really bugs me, and yep - I know that I can simply play the show in iPhoto - but man it is nice to use that remote and have things simply work..
    Anyone?
    Thanks!
    Jared
    Message was edited by: JMC2007

  • Just upgraded to OSx Maverics and Iphoto 9.5 - no music during slideshow ?

    Just upgraded to OSx Maverics and Iphoto 9.5 and now have no music when playing slideshows (using custom or default). All libraries worked fine before upgrade (using Lion). Any ideas?

    In iTunes go File -> Library -> Organise Library -> Reorganise Library.
    Then quit and restart iPhoto.
    Credit to user keysandfood who figured that one out.

  • Can't turn off music during slideshow

    I have been using iPhoto for years and like it, usually.
    Lately I have had trouble with the Slideshow settings (iPhoto '11, version 9.2.1, running in OS 10.7.5 on a MacBook Pro).
    Basically, whatever I set (time per slide, music on or off), after clicking "Play"  the slideshow defaults to 3.0 sec per slide and music set to On.
    I must be missing something somewhere.

    Thanks for the reply.
    Updated iPhoto; still the same problem.
    Next I restarted, deleted the iPhoto plist from my hidden Library, and restarted.
    Now, iPhoto won't recognize my library; although, it is willing to import all the photos (presumably without the albums, metadata etc.).
    I put the plist back into the Library and restarted, and it still doesn't recognize its old familiar library.

  • Need to pause Background music during .flv playback

    Hello,
    I have a project that has 2 .flv videos, and I need to pause the background music while the user is playing those videos- is there an advanced action that would let me do this?  Any other ideas?
    Thanks!

    No worries.
    I looked through the Cp4/5 system variables and I didn't see a way to manually set the background audio to 0%.
    I don't know what else is going on in your slide so this may or may not give the effect you want, but can you mute the background audio in the slide properties and add the narration audio to an invisible object on the slide?

  • Slideshow playback has no music. Suggestions?

    Hi All,
    Running latest LR 1.3.1, on a MacBook Pro 15" Intel, with latest Leopard updates.
    Lightroom Slideshow will play fully normal with transitions, etc., using both factory and custom user-adjusted settings. Looks great, except, there is no music.
    I do have 'Soundtrack' checked, and have tried selecting 'Music', 'Library', etc., as well as specific 'playlists'. Still get nothing, no music.
    FYI, I have noticed that when I click 'Refresh Playlist from iTunes' it is not refreshing the playlist, as in, it only shows existing older playlists. None of my more recently added playlists show up on refresh. It would seem to imply LR is not actually seeing iTunes.
    Any thoughts?
    Thanks for your help.
    Sol

    OK, I guess this is one of those "you only need this information if . . ." type deals.
    *The Problem: Lightroom won't recognize iTunes music for 'Slideshow' playback.
    *Issue creating the problem: Multiple libraries for iTunes. (This assumes you know this is an option.)
    *The Solution: Use the 'local' library only.
    When at home (and my home office) I run my larger iTunes library located on an external 160 GB HD. Apparently, Lightroom has an issue with that.
    I restarted iTunes, holding the 'Option'-Mac ('Control'-PC) and selected my local library located on my actual MacBook Pro HD. It's much smaller, but more importantly, it's located on the same drive as Lightroom. Lightroom sees it now, including 'Playlist' changes, etc. All is good now.
    Glad I could help. ;-)
    Sol

  • Problem playing selected music with slideshow

    Hi
    I am having trouble playing music with slideshows since updating to iphoto 6. I can see all my playlists and I am able to select the playlist I want and this will play in the 'play music during slideshow' window. However, when I play the slideshow I receive an error message telling me that 'the music you have selected can't be found or can't be opened'.
    This has only been a problem since updating and it doesn't matter what playlist I choose - they will all play in both iTunes and the selection screen for the slideshpw but not actually with the slideshow (the play music with slideshow box is ticked).
    Any suggestions would be greatly appreciated as I am about to throw my mac out the window.

    earnie82:
    Welcome to the Apple Discussions. What version of Quicktime are you running? You should be at 7.1.5. If not update to it and give it another try.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • IPhoto 09.  I DON'T want music in slideshows

    I recently had to get a new computer, and it came with the new version of iLife. My slideshows now all have music, whether I want them to or not. I've figured out how to make the ones I want to have music have the music I select, but can't seem to have them be silent. The "play music during slideshow" button is unchecked, but it still insists on playing music from the default list.
    How do I muzzle iPhoto?

    Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    *What's the plist file?*
    For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
    Regards
    TD

  • No music on slideshow imported from iPhoto

    Hi,
    I posted the following question in the iPod discussion area and no one responded, so figure I'd give it a try here. I was able to import a slideshow from iPhoto 5.0.4 to a 20GB iPod Color. The slideshow works just fine, but am not getting the music I heard when watching the slideshow on my Mac. BTW, I did go under Settings on the iPod and select music->From iPhoto. Not sure if it makes a difference, but the music on my slideshow is the iPhoto default (Bach "Jesu, Joy of Man's Desire"). Any ideas?
    Thanks in advance,
    Ron

    Hi,
    Try turning the music off in the slideshow (Select: Music icon in bottom right of window, unselect play music during slideshow).
    Export the slideshow again (sorry)
    Add your play list for the slide show to your ipod.
    Add new slide show to your ipod
    On ipod go to: Photos:Slideshow settings: Music: select your playlist from the list.
    The music should play when you statr your slideshow.
    Hope this helps!

  • Sound stops during playback

    Running the latest version of CS6 (current on all updates) on a Mac Mini i7 2.3GHz with 16GB RAM running OS X 10.8.2.
    Whenever CPU usage starts to get a little heavy, sound will go silent at random times during playback of timeline in the program monitor.  Meters go to zero when sound goes out and go active when sound returns.  Video playback is fine and there are no dropped frames.  This also was happening on my previous machine, a 2008 Mac Pro.  Started happening with CS6 and never happened in CS5.5.
    All my source footage is h264 from a Canon 5D.  Sequence was created by doing the 'create sequence from clip' command.  Program monitor resolution is set at 1/4.  Played with setting audio hardware buffersizes to different values but with no change in behavior.

    I'm having the same problem on an editing workstation with CS6. The audio will stop playing after 4-5 seconds, video plays fine. The timeline has been rendered. If I hit the stop/pause key, (spacebar), and hit it again, it will play for another 4-5 seconds before the audio drops out. Sometimes only one audio track will stop playing.
    Video is 720P, two audio tracks, three video tracks.  System is win 7-64 with an intel I7 extreme CPU, 12 GB RAM (9GB dedicated to Premiere, performance mode)
    Any suggestions?

  • No sound during fullscreen playback iTunes.

    After updating my iTUNES to Version 12.1.2.27. There is no audio during fullscreen video playback. Audio is normal during windowed playback.
    I'm using a Macbook Pro retina 13" with OS X 10.8.3. Even after increasing or decreasing the audio level in fullscreen there is no sound. Please help.

    Hi!
    Welcome to the discussions and to Macs!
    Don't know about your specifics, but a simple thing to test is to look at the iDVD menu for the titles....I am assuming this is on a submenu....to see if the audio icon is active. If you look in the audio well, there should be a tiny icon with wavy lines. If it is not present, click on the audio well and it should return. It is very small...I almost could not see it.
    You cannot see this if you have any audio files in the well, so remove the file first.
    I am sure more knowledgeable users will offer their advice as well.

Maybe you are looking for

  • Table which stores SO36 details?

    Hi Friends, I want to know the table which stores the internet email address that is stored by user thru Tcode SO36. ( same can be maintained thru SBWP->Settings->Office settings->Automatic forwarding ) Purpose: i want to know User Id - Vs - email ad

  • Middleware settings to map CRM Z table fields with ECC material master flds

    Hi, We want to create  a Z table in CRM,this table willl have 2 fields External Material Group and Old Material Number.These 2 fields in CRM table are corresponding to same material master (MM03) fields in ECC.The changes to these fields done in ECC

  • Error when using tag library !

    Hi,           I am trying to run a JSP in weblogic which makes use of tag library in it. I am getting the following error           C:\bea\weblogic81\samples\domains\examples\.\examplesServer\.wlnotdelete\extract\examplesServer_Bidla_Bidla\jsp_servle

  • SCHEDULING AGREEMENT AS FOLLOW-ON DOCUMENT

    Hello, I have an SRM rel 4.0. integrated with R/3. I have implemented a Plan driven procurement scenarious with auctions and Bid invitations. I would like to know if is it possible generate, as follow on document a Scheduling Agreement instead of a C

  • On which device do you set the password?

    I have a AP Express g connected to a Extreme n. Because I am using the AP Express g, I understand I need to use WEP security. My question is when using Airport Utility, do I set the password on the Extreme n using "WEP (Transitional Security Network)