Tint: How does one choose a tint color?

I've had Aperture 3 for a few months now, but I have never satisfactorily understood how the tint function works.
I'd like to "brush" a white tint into a yellow toothed smile to get rid of yellow teeth. Is that possible? When I choose the tint function now, a green tint appears and I have no idea how to change it to white. Any advice would be great.

If you want to change a yellowish color to white, that is not a problem of changing the the tint, it is a problem of changing the saturation and the luminance (intensity).
The are three basic properties of a color: the hue (or tint), the saturation, and the luminance (or intensity).
If you modify the hue (or tint) you shift the color along the color wheel towards the pupple blue end of the rainbow colors or towards the yellow red end of the rainbow colors.
If you change the saturation you change the colors from vividly colored to pale.
If you change the intensity you change from dark to light, or black to white.
To remove any color, and to make tinted teeth pearly white, increase the intensity (from dark to light) and remove any saturation, make the color pale. This is best done with the color controls.
Regards
Léonie

Similar Messages

Using Apple's mail how does one overscore a text?

Using Apple's mail how does one overscore a text?

Hi Air007,
Welcome to the Support Communities!
I think you are asking about "Strikethrough? "
In your email message, select the word or words that you want to edit.
Right click or Control click on the selected text.
From the menu, choose Font > Show Fonts
Select the second item on the toolbar, which is Text Strikethrough
Choose a single, double or color line
I hope this information helps ....
Have a great day!
- Judy

In Pages 5 when I try to attach a pages document to an email it gives me 2 folders and 4 files ??? How does one email a pages document.

How does one email a pages document? In pages 5 when I try to attach a pages document to a gmail email it gives me 2 folders and 4 other files to choose from.

Sounds like you are using Gmail.
Pages 5 uses a zipped package of files as its format. 3rd party servers don't understand the format and show it as the component parts.
Use Mail toenail the file or zip the .pages document before sending.
Peter

How does one get huey pro to start up when computer starts in morning

Huey Pro is a sensor that measures and monitors the light in the room so that colors are rendered as acccurately as possible. Once I calibrated the screen and device, it should fire up when I restart the computer but it dos not. the icon in the system folder when clicked, says that the system preference folder needs to restart, the it will fire up.
So How does one get this to start early.
Robert

Hi Robert
I am not sure that you can make the Huey Pro work correctly.Worked fine on windows but it was the one programme for me that I have never had success with on the Mac.
I have checked the Huey web site for info but the support seems to have stopped.
So the only way I can do it is to wait until the Icon is in the top right section of the screen,note that a white cross is in it and then click on the Icon in the dock open up the programme until the Start bit occurs then just click the close button.That fixes it for me.
Rob

How Does One Modify Photoshop Templates in Dreamweaver

I posted this over on the Photoshop forum, but no one has
replied. It is a hybrid sort of question.
I've been trying to modify the Horizontal Neutral template of
the Web Photo Gallery in Photoshop CS using Dreamweaver MX (v.6.1)
on my G5 running Tiger and am almost there. Aside from the overall
design (fonts and colors) I really like the interface of this
particular gallery with a horizontal slider to quickly scroll
through images, that when selected, appear in large form in the
center of the page. But I need to customize it to get it to match
the feel of my site.
My problem: I'm trying to point to a gif file that is part of
my website image library as my background. I want the Horizontal
Neutral Gallery to float in that image background. But, I can't
seem to get the background image to appear where it is supposed to.
I've gone into the various components of the template
(FrameSet, SubPage, etc.) and by duplicating the files and
modifying the code, I am able to get the background image to appear
within the tables that make up the navigation and image gallery
components. But, I've not been able to get the image to appear as
the background itself.
I'd even be happy to simply have the entire Horizontal
Neutral Gallery float in the middle of one of my own pages with the
image file as a background if it is possible, but can't seem to
even get it to do that. How does one access the code that controls
the background image in this template or the script that generates
these galleries?
Thanks in advance!

The reason the that the edit button ( - ) top righthand corner had 'disappeared', was that iCloud was enabled but that the Addressbook subsetting under iCloud was set to off in the phone settings.
Changing it to 'on' made the edit button reappear.
Thanks to the guys in Cambridge Apple Store!!
The reason the that the edit button ( - ) top righthand corner had 'disappeared', was that iCloud was enabled but that the Addressbook subsetting under iCloud was set to off in the phone settings.Changing it to 'on' made the edit button reappear.
Thanks to the guys in Cambridge Apple Store!!

How does ISE choose which IP to put in URL redirect response?

Hello,
does anyone know how does ISE choose which IP to put in URL redirect response if it has more than one interface with an IP address and all interfaces are enabled in the portal configuration?
I have a single ISE 1.3 PSN with all four interfaces configured, enabled, each on unique VLAN, and each with unique IP address.
In the CWA portal configuration, all four interfaces are enabled.
Wired clients connect to NAD, NAD sends RADIUS request to ISE, ISE responds with a RADIUS response including the URL-Redirect parameter which specifies the web redirect URL. ISE configuration uses "ip:port" in the URL.
My question is how does ISE choose which of its four interfaces to put in this URL? Is it always the same interface that RADIUS packets were received on? Or does it always choose the first portal enabled interface? Or is there another logic? Configurable or unconfigurable?
Thanks!

ISE uses the first interface enabled for that portal, so if want to use a specific interface, then only enable that interface. If interface is GE0, then default behavior is to redirect with ip value set to node's FQDN. If interface other than GE0, then default behavior is to return the IP address of the associated interface.
Aliases can be configured for each interface using the CLI 'ip host' command to associate a hostname/FQDN to the IP address of a given interface. When configured, ISE will return that value rather than IP address in redirect. This is critical if want to avoid certificate trust warning on connecting clients.
Be sure that certificate assigned to interface includes the correct FQDN or optionally wilcard value in the CN or SAN fields to avoid cert warnings.

How can one create a paint color generated from a photo using Kuler?

How can one create a paint color generated from a photo using Kuler?

The best way to remove a pattern is to use a Fast Fourier Transform. There's a free plugin (as well as examples and instructions) here:
http://dl.dropboxusercontent.com/u/6795661/4N6site/improc/fftplugin/examples.htm
Using the plugin requires editing the individual colour channels, which PSE does not natively allow. You'll need the reasonably-priced Elements+ addin:
http://elementsplus.net/
Here's a crop at 100% of the result I got:
The pattern is much reduced. With some experimenting, you can probably do a little better.
Ken

How does one remove the spell check high light when the word is spelled correctly in iOS 7.1.1?

How does one remove the spell check high light in iOS7.1.1 (Pages) when the word is spelled correctly?

Hello dondew,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Have a nice day,
Mario

How does one loop playback of small selections within the timeline?

How does one loop a selection of footage from within the timeline? I'm trying to edit students' tapping hands and pencils on desks into small timed chunks that will play back as seamless loops and I need to be able to slowly shorten or elongate sections of footage as it plays and repeates until the loop matches the timing of the song we are making. I'm using PE8 and can't seen to find an easy way to do this. Surely there is one! Is there?

I appreciate the help everbody, but It looks like I didn't state my question effectively. Let me try again.
It will be easier if I explain what it is I am used to. This is what I need to know how to do in PE8, because the school in which I teach AV has chosen PE8 for my classes and won't let me install anything else.
In Sony Vegas - all versions, you can click and drag to quickly make a selection of video and audio. You can do this while video is rolling and you can then choose to have your A&V loop within this selection. I have seen replies on this forum where this feature within Vegas was treated as if it were a dumb thing. It's not dumb once you realize what it can be used to do for you. While continuing to loop within your slelection, you can move this selection throughout your timeline, rough tuning where you want your loop to be. If your loop needs to be exactly 66 frames, for instance, you could first set this selection at 66 frames and then move it up and down the timlene until you find the best place to cut. Or, in the case of trying to find where some sound within your selection makes a seamless loop, you can increase or decrease the size of your selection on the fly as the selection continues to repeat.
How do you do that in PE8? If it can't do it, can the full version of Premiere?
Thanks again for the help.
-Chris

How does one update Std Table EDIPHONE(there is no Table Maintainance)?

How does one update Std Table EDIPHONE(there is no Table Maintainance)?
Regards,
Shashank.

You should not update the standard database table directly.
through the partner profile tcode: WE20 you can update the table EDIPHONE.
u can choose required partner profile in the WE20, select the tab 'Telephony', and update the data, the table EDIPHONE will get updated.
if you want to maintain this edi phone data for a particular message type/s then select inbound/output parameters and double clikc on it, go to last tab in teh screen 'Telephony', and updated the required data.

How does one crop an .ai image to a defined shape?

How does one crop an .ai image to a defined shape?
In other words, I want to select and crop from a larger image an area such as a rectangle that I define.
Right now, I try to select and crop a rectangular portion of an image but every shape that is even partially within the rectangle is selected both within and without the rectangle.
I am using CS2 on a Mac.

Clifford,
I've figured out part 1, how to crop an image using a rectangle on another layer.
Then I did:
To really get rid of the outlying parts, with the Clipping Mask still
selected you may:
5) Choose anything but Normal in the Transparency palette dropdown
and Object>Flatten Transparency (just keep the defaults).
The result was "Filter cannot complete because of unknown error" FSpt
Is this a bug, or is their a problem with the way I am following your
method?
It is hard to say.
It is more convenient to place the rectangle mentioned in 1) on the same layer; if you place the path(s) to define the Clipping Mask, the Clipping Mask and its contents will be on that layer, everything from lower layers being moved to it.
What about 2) - 4)?
It is easier to answer if you state what happens in the individual steps (repeated here):
1) Create a rectangle on top of the image with the same size (you may use the Transform palette/panel to see the size, and to place it by);
2) Create the cutout shape;
3) Select 1) and 2) and Object>Compound Path>Make;
4) Also select the image, and Object>Clipping Mask>Make.
To really get rid of the outlying parts, with the Clipping Mask still selected you may:
5) Choose anything but Normal in the Transparency palette dropdown and Object>Flatten Transparency (just keep the defaults).

How does one test for clipping?

Hi,
I know this is really basic stuff, but I've never really had a critical situation to test and now I do.
How does one test to see if clipping has occurred and if recording levels have been too high?
Many Thanks, Frank B.

You could open the file in Soundtrack Pro (Shift + W as default). There you can check if the file is clipped. On the left part of the SP screen you see the Analysis tab. Click it and choose Clipped signal and press the Analyze button.
It might take some time so if you want you can chose a section of the file where it´s most probable clipping has occured.
You can also chose to Fix it in SP. You can try it to see if it makes things better. But of course it´s better to redo it in Logic, if possible.
Hope this helped!
Juhani

How does one copy an xygraph from a refnum?

Sorry, normally this is straight forward enough to push through on my own.
Purpose:
Pass Refnum of XY graph to subvi -->
Subvi's purpose : PRINT XYGRAPH to file/pdf/bmp, manipulate xy graph further (change back ground color to optomize for printing, optomize xy graph size for printing, move legend), perform some simple analysis on the data (rms, pkp etc)
Problem Statements:
1 When using a refnum, writing any changes to the refnums property value will also change the parent i.e. the subvi xygraph. This is not desired, so an exact copy of the xygraph must be made. HOW DO YOU DO THIS?
2 When using a refnum for an xygraph, how does one retrieve the xy values? If the property node for value is selected, a variant is produced. (which after careful examination I was still not able to make heads or tales of this particular variant)
p.s. A refnum is used because the xygraph already has formatting applied to its legend, plots, axis, etc. A refnum passed to a subvi is the only way I know to pass all formating etc for the graph.
p.p.s. I understand that there is an invoke node that will export an image, it contains certain limitations (such as requiring the subvi be opened, since it works by similar rules to a printscrn) that make it un applicable to this problem.
-Regards
eximo
UofL Bioengineering M.S.
Neuronetrix
"I had rather be right than be president" -Henry Clay
Solved!
Go to Solution.

eximo wrote:
Problem Statements:
1 When using a refnum, writing any changes to the refnums property value will also change the parent i.e. the subvi xygraph.
I don't understand this statement. Does the subVI have a graph also? Obviously, if you make changes to properties via the refnum, then the graph it's pointing to will change.
p.p.s. I understand that there is an invoke node that will export an image, it contains certain limitations (such as requiring the subvi be opened, since it works by similar rules to a printscrn) that make it un applicable to this problem.
Again, I don't understand. Where's the graph? On the main VI, or the subVI? If it's on the main VI, why would this be an issue? Wouldn't the main VI window be open?

How does one convert pdf to excel

how does one convert pdf to excel

Use Acrobat and choose Save As -> Spreadsheet -> Microsoft Excel

HT1391 How does one delete apps or files from iCloud Permanently so I may re-download without retrieving existing cloud file?for example the U2 Marketing fast , an Album I have no interest in...is now in my Cloud.. How can I remove this File from iPhone &

How does one delete apps or files from iCloud Permanently so I may re-download without retrieving existing cloud file?for example the U2 Marketing fast , an Album I have no interest in...is now in my Cloud.. How can I remove this File from iPhone & cloud

Hey there Matt.dvs1,
Although there is not a way to remove past purchases from your iTunes account completely, you can hide them so that you don't have to see them if you don't want to. This article will help you do that:
iTunes Store: Hiding and unhiding purchases - Apple Support
Hide your purchases
Open iTunes on your Mac or PC.
From the Store menu, choose Store > Sign In, and then enter your Apple ID and password.
Go to the iTunes Store.
Click Purchased from the Quick Links section on the right side of the iTunes Store.
Choose a content type by clicking Music, Movies, TV Shows, Apps, or Books from the top of the window.
A list of your purchased items for the content type you are viewing will appear. Mouse over the item you want to hide until an X appears its top-left corner.
A confirmation dialog will appear once you click the X.
Thank you for using Apple Support Communities.
All the best,
Sterling

Tint: How does one choose a tint color?

Similar Messages

Maybe you are looking for