Tint2: Multiple Desktops in one panel but spread over complete width

Hi,
I just installed Arch again und my desktop computer which has 2 monitors. I use tint2 as a panel and I have it on my secondary monitor only. I am using Openbox Multihead as Window Manager.
Now I am able to get two distinct settings for tint2:
- Showing the currently active desktop with all its windows at the default width
- Showing all desktops where each desktop section receives the exact same space regardlass of active windows
What I want: Showing all currently active windows like I had only one desktop (I am fine showing windows on desktop that are currently invisible) while having them spread out over the complete width.
I know that the 'multi_desktop' option has the goal to be some kind of desktop pager where you can drag applications around. But my goal would be a view just like 'single_desktop' but with all currently opened windows.
So I can see two possible solutions here:
- Either tint2 can be configured in this way, or
- I can trick tint2 by telling Openbox to always look at all desktops (at least if tint2 receives its information from the window manager)
Is there any possibility to acheive my goal?
Thanks in advance,
javex

It appears there is no solution out there but I did manage to find something else for myself:
I now use only two desktops, each one is fixed to one monitor and through this, tint2 splits it in half which actually is pretty nice, since I can now switch around windows on monitors via taskbar.
Should the need for more desktops arise, I will probably use some kind of composite cube or something which will provide the functionality, too.

Similar Messages

I wanted to display the multiple rows in one row but column should be diff

Hi
Could any body help me regarding this query how to write to get the multiple rows in one row.
eg.
i have one table tab1(eno number,ename varchar2,uid1 varchar2,uid2 varchar2,uid3 varchar4)
but when i am runing the query I am getting multiple record against one eno number because of uid1,uid2,uid3
suppose value of table is
eno ename uid1 uid2 uid3
1 a u1
1 a u2
1 a u3
when i am quering it is coming same as above but I want in one row
eno ename uid1 uid2 uid3
1 a u1 u2 u3
can any onle help me how to write the query for this requirement.
thanks
saif

which is hard coded in my code? Here another approach, but fail for c as there is no information for the value of a column: does 1 in u1 means col 1, etc.
/* Formatted on 2012/05/29 16:29 (Formatter Plus v4.8.8) */
WITH t AS
     (SELECT 1 col1, 'a' col2, 'u1' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'a' col2, 'u2' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'a' col2, 'u3' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'b' col2, 'u1' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'b' col2, 'u3' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'b' col2, 'u2' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'c' col2, 'u1' col3
        FROM DUAL
      UNION ALL
      SELECT 1 col1, 'c' col2, 'u3' col3
        FROM DUAL)
SELECT   xx.col1, xx.col2, MAX (DECODE (xx.rn, 1, col3)) AS uid1, MAX (DECODE (xx.rn, 2, col3)) AS uid2,
         MAX (DECODE (xx.rn, 3, col3)) AS uid3
    FROM (SELECT t.col1, t.col2, t.col3, ROW_NUMBER () OVER (PARTITION BY col1, col2 ORDER BY col3) rn
            FROM t) xx
GROUP BY col1, col2;output:
COL1     COL2     UID1     UID2     UID3
1     a     u1     u2     u3
1     b     u1     u2     u3
1     c     u1     u3
Edited by: ʃʃp on May 29, 2012 2:30 AM

Display multiple desktops on one monitor

I have a 32 inch Hannspree HDTV connected to my Mac Mini via HDMI.
I would like to create four quadrants on my screen and display a different desktop in each quadrant.
I know how to create the multiple desktops in mission control, what I don't know is how to display them all at once!
I am not looking for answers involving multiple monitors! I want to divide my 32 monitor up into four seperate "screens" and display a different desktop in each "screen"
Thanks for the help!
CB

Hi,
It can be done by using Server side code in Visual Webpart .Please check the below link.
http://sharepointkitchen.blogspot.in/2013/07/creating-controls-dynamically-in-aspnet.html
If you are looking for something different pls let me know..
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh

Multiple JFrames in one panel

Hi there!
I need to have multiple windows open at the same time within my application.
Having opened multiple windows, I need to be able to move these small windows around, close them one at a time, and so forth...
All these small JFrames(windows) need to be added to a component which makes it possible to move them around separately, of course. BUT which component does the job???
cheers,
michel

I found a place to start myself on this address:
http://www.cs.cf.ac.uk/Dave/HCI/HCI_Handout_CALLER/node47.html
Thanks, anyway!
cheers,
michel

Multiple desktops. One keeps switching to "desktop 5" when I click in the other.

I have 2 monitors running 5 desktops. Whenever I click on the monitor that isn't holding desktop 5 the other monitor automatically switches from whatever desktop it's currently displaying to desktop 5. Why? I need this to stop. please help.

Sounds that you have a sticky Delete key.
Try another keyboard to see if that works properly.

How Do I Group Multiple Disks as One Album?

I've got the latest iTunes update, 11.0.4, and as with the update before it, I'm supposed to be able to group multiple disks as one album, but I can't figure out how, and can't find any directions at Apple.
I've lately begun ripping my large collection of symphonies and operas on CD into iTunes. Operas especially almost always come on two, three, or even four CD's, BUT IT'S ALL THE SAME OPERA, and the CD's come in the same boxed set. On top of that, there really aren't any "tracks" in an opera; the plot and the music unroll seamlessly from beginning to end (that sometimes takes 5 or 6 hours, which goes with the operatic territory).
On my CD player, I'm used to a pause between disks, but now that I've figured out how to get the "tracks" on each CD to play in order on iTunes (not so intuitive), I'd like to be able to go from the last "track" on Disk 1 to the first track on Disk 2 without interruption, since the technology should be able to support that option.
In the INFO box, I've tried keeping "1 of 3," "2 of 3," "3 of 3." No joy. So I've tried erasing the first element, 1, 2, 3, and just leaving the total number of disks. Again, no joy.
Since the album name is often filled in with something like "Carmen [Disk 1]" for example, and since Albums should have exactly the same name so that iTunes can figure out that in fact, they belong to the same work, I've tried deleting '[Disk 1]" etc. on all 3, leaving just "Carmen" in the appropriate space on the INFO panel for each of the 3 disks. Doesn't work.
Has anyone else been afflicted with the same problem?
Has anyone got a solution?

Have you seen this helpful article:
Grouping tracks into albums:
http://samsoft.org.uk/iTunes/grouping.asp
In the INFO box, I've tried keeping "1 of 3," "2 of 3," "3 of 3."
That is correct. Don't erase the first element, 1, 2, 3, that should not matter.
Since the album name is often filled in with something like "Carmen [Disk 1]" for example, and since Albums should have exactly the same name so that iTunes can figure out that in fact, they belong to the same work, I've tried deleting '[Disk 1]" etc. on all 3, leaving just "Carmen" in the appropriate space on the INFO panel for each of the 3 disks.
Also correct. Also chec, if the "Sort album name" is the same.
Do the artists differ on the tracks?
Then set the "Album Artist" on all CDs to the same name (Various Artists), also check, if the album sort artists names differ.

Use of Multiple Desktops

Hi there,
I was happy to read that there was such a thing as Multiple Desktops on the Mac but then was disappointed to actually see it in action.
I thought that I could place folders and files on different desktops so that it could be easier for me to organise my work. But so far, I can only assign applications to open up in specific desktops which isn't what I was looking for. In fact, I am struggling to see the point of this - the only thing I can see that would be an advantage is that if I have multiple applications running, I could assign for example, Photoshop to D2, Word to D3 and just click on the icon at the bottom to zap straight to that app without having to look for it under all my open apps. This is the most I can see in its usefulness.
BUT... if other users have other ways they use these desktops I would really be interested to know about it - or if any one is aware of a good app that does what I want, i.e. different files on different desktops, it would be great.
Thanks,
Maz

I figured it out. ^1 typed from the number keys is not equivalent to ^1 typed from the numeric keypad. So, when you go into system prefs / keyboard / shortcuts / mission control, it may LOOK the same, but it is not. You simply have to select each of your spaces and change them to ^1, ^2, ^3, etc., using the NUMERIC keypad. It will look the same to you, but it will work properly after that.

Advise on using DBMS_XA with multiple branches under one global transaction

Dear all
I need some advise on using DBMS_XA from PL/SQL with tightly coupled multiple branches under one global transaction. Basically, I've successfully written some PL/SQL code that in 3 different sessions attaches to 3 different branches of one global transaction and before ending each branch they can see each others uncommitted data. So far so good.
However, I'm not sure I completely understand how each branch must call xa_end, xa_prepare and xa_commit correctly using two phase commit and my calls result in errors like:
ORA-24767: transaction branch prepare returns read-only (XA error code 3 = Transaction was read-only and has been committed)
ORA-24756: transaction does not exist (XA error code -4 = XID is not valid)
ORA-02051: another session or branch in same transaction failed or finalized
This is the structure of my programs (3 SQL*Plus sessions):
main: Uses xid 123|0 (branch 0 of global transaction 123). This should be the coordinator that commits using two phase commit across the 3 branches
m1.xa_start tmnoflags
m2.DML
m3.Wait for thread A + B to manually be started and run xa_end
m4.xa_end tmsuccess
m5.xa_prepare
m6.xa_commit false
thread A: Uses xid 123|A (branch A of global transaction 123)
a1.xa_start tmnoflags
a2.DML -- thread A can see main and thread B's data
a3.xa_end tmsuccess
a4.xa_prepare -- required?
a5.Should we also call xa_commit false?
thread B: Uses xid 123|B (branch B of global transaction 123)
b1.xa_start tmnoflags
b2.DML -- thread B can see main and thread A's data
b3.xa_end tmsuccess
b4.xa_prepare -- required?
b5.Should we also call xa_commit false?
The failing steps are:
m5
m6
a4
a5
b4
b5
Before starting calling xa_end I see 3 rows in V$GLOBAL_TRANSACTION, eg (hex 7B = decimal 123):
FORMATID GLOBALID BRANCHID BRANCHES REFCOUNT PREPARECOUNT STATE FLAGS COUPLING
203348753 0000007B 00000000000000000000000000000000 3 3 0 ACTIVE 0 TIGHTLY COUPLED
203348753 0000007B 0000000000000000000000000000000A 3 3 0 ACTIVE 0 TIGHTLY COUPLED
203348753 0000007B 0000000000000000000000000000000B 3 3 0 ACTIVE 0 TIGHTLY COUPLED
Thanks a lot in advance.
Cheers
Finn

OK, I've figured it out. This is poorly documented as it's not well explained how to handle the various return codes. Turns out that all but the last xa_prepare calls return dbms_xa.xa_rdonly (tightly coupled branches are combined -- "read only" optimization), the last one returns dbms_xa.xa_ok and this is when you should call xa_commit.
Now my next problem is that DBMS_XA doesn't work from within jobs (DBMS_JOB and DBMS_SCHEDULER), which makes it very difficult to use DBMS_XA. My purpose of using DBMS_XA is to coordinate work across multiple sessions in one transaction but if I can't easily create the multiple sessions, I'm stuck.
When called from a job, xa_start throws:
ORA-24789: start not allowed in recursive call
on Oracle 11.2. In Oracle 11.1 it works, but xa_end fails with
ORA-25352: no current transaction
so I guess in fact the xa_start call didn't really work either, even though it returned tm_ok.
I'm now trying to find a workaround on how to use DBMS_XA from within jobs, please comment if you have any suggestions. Or if you have any suggestions on other means of establishing the concurrent sessions (I wouldn't like to resort to external programs that need username/password to connect as password management would be a security issue).
Thanks in advance.
Cheers
Finn

Deleting multiple items in one click

Hi Guys
My iTunes has been reset and has for some reason added all the songs on my computer twice = about 120GB when it should only be 60GB.
I'm sure there used to be a way to delete multiple items in one click but the only way I can seem to do it is by doing it individually after click view duplicates, this clearly isn't practical for over 5500 songs.
Thanks for the help!

Thanks for the answer.
If I understand it correct, If I have an invoice of 10+ items, there is no possibility to delete 5 items for example with one click?
I have to the delete the 5 items one by one or delete the whole invoice and start again?
Thanks.

Making multiple projects into one SCORM

I have made multiple Captivate 5 projects that need to transform into one SCORM Module on my moodle LMS website, and count as one SCORM Quiz/Test. I've tried to even load multiple projects in one zip, but it failed to jump to the other projects when I had them all linked together leaving only this: "loading..." when I click the button to open project on the SCORM package. Please Help... Thanks...

I'm assuming here that your questions are related to the fields in the Quiz Preferences in Captivate.
The Objective ID is the same for all reporting elements in a given module. The Interaction ID Prefix just helps to distinguish which particular module your question data came from if you happen to be viewing it on drilldown inside your LMS. As long as it's not the same prefix as for other modules, it should be fine.
In the Multi-SCORM Packager dialog, the information you add to the fields will be written to the imsmanifest.xml file for the overall package:
Identifier is to provide an ID for your course that will be unique in your LMS. This will also be used to generate the filename of the final zip file.
Title is the name of the course.
Description may or may not be required by your LMS. Test and see. In some LMSs this info gets displayed to the user when viewing a synopsis of the course.
Version is the version of the package. I actually use the date reversed for my versioning (20110520a) with a letter on the end in case I output more than one version on a given day.
Duration is important to add. Some LMSs won't regard your package as compliant without this.
Subject is not something I've generally worried about, but it doesn't hurt to put a brief phrase on what the course topic material is about (e.g. Health and Safety)

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Can multiple PCs access one remote panel at the same time?

I've written a program in labview 7.1 to monitor/control a labview application running in the test cell through Remote Panel. I and my coworker can remotely monitor and/or control this labview application individually. But if my coworker has the remote panel displayed on his PC and I try to get the remote panel on my PC, I get a labview error (63) as below:
"LabVIEW: Serial port receive buffer overflow.
LabVIEW: The network connection was refused by the server."
My question is: Can multiple PCs access one remote panel at the same time?
Thanks in advance!
Y

Sorry I wasn't clear. The remote panel license is separate from the number of LabVIEW development licenses. Pricing information on remote panel licenses can be found here.

Multiple selection over mualtiple tables in one panel.

GUI is having 3 JTables placed in one JPanel.
User is able to select one row fron each table using mouse over a row and drag it. How this can be stop ????
Step :-
one JPanel (Ex. jp).
Three JTable (ex. jt1, jt2 and jt3)placed in above JPanel.
No row is selected from any table.
Select one row from jt1.
Go to jt2 press mouse over one row and drag it(don't release mouse.)
after coming out of row release.
Same action can do with jt3 also.
But this is not required one.
Provide the solution that user must not be able to select row form more than one row at a time.

It appears there is no solution out there but I did manage to find something else for myself:
I now use only two desktops, each one is fixed to one monitor and through this, tint2 splits it in half which actually is pretty nice, since I can now switch around windows on monitors via taskbar.
Should the need for more desktops arise, I will probably use some kind of composite cube or something which will provide the functionality, too.

HT202213 Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up desperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc

Can multiple iPhones share one iTunes without syncing the phones together? We just got new iPhones and set up seperate apple id's, but don't know if we can both sync to our existing iTunes without linking our phones together (contacts, apps, etc) ????

How to use multiple iPods, iPads, or iPhones with one computer

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

How do I setup multiple users to use one source but manage playlists separately? For example, play counts are specific to each user.

Hi,
Thank you for posting in Windows Server Forum.
Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
Understanding forwarders
http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
Configure a DNS Server to Use Forwarders
http://technet.microsoft.com/en-us/library/cc754941.aspx
Hope it helps!
Regards.

Tint2: Multiple Desktops in one panel but spread over complete width

Similar Messages

Maybe you are looking for