Tiny Black lines in SWF

When I publish a SWF, there are 2 tiny black lines that
appear that aren't visible in the FLA file. Do you know why this
could occur? I can't figure why they would be there...
View my SWF here...
TrailerPartz Site
The SWF is in the upper left and the lines are just to the
right of the "Z" in that silver border

It appears as though there is a split in the background
graphic, possibly at a point where you moved a section of it. If
you did that, try redoing that piece as a whole and see if it gets
rid of the lines. If you never touched it in such a manner, there's
no more guessing I can do to help.

Similar Messages

Parasites graphics rendering - little black line on image

Hello
In the menu it appears in tiny black line and can not find their origin
http://coach.de.vie.free.fr/
Thanks

that site has bigger problems than any little black lines. it loads as slower than an adobe suite installs.

Flickering black line below menubar in mavericks

In december 2013 I purchased my new macbookpro with retina display (10.9.1 preinstalled, 16GB RAM). Without having any other third party applications installed I noticed right from the beginning, that the lower tiny black line that separates the top menubar from the lower part of the screen sometimes flickers. I've seen it quite often, sometimes when using mail, sometimes when using preview. Here is what I did to solve the issue:
Update to 10.9.2 ---> same problem
PRAM Reset ---> same problem
SMC Reset ---> same problem
Run OSX on Safe Mode ---> same problem
Also what I can say is that my logic board was replaced after a few weeks since a fan was making noise and had to be replaced. Also with a new logic board the issue is still the same. Then a few days later I visited a friend of mine. She also purchased a new mac. when helping her on getting to know the mac, I noticed the same problem on her screen.
I've never seen that on my older macbook pro from early 2008 running 10.6.8
So my question: Is that a known issue? And is there anything I can do to fix it, apart from wating for apple to update Mavericks? It seem like it is not hardware but software related.
Thanks for your time.

Would you post a screen shot so people can see what you are seeing? Make sure you cover any personal information using Preview. Post the screen shot in a Reply using the camera icon. Copy and paste doesn't work.
Screen shots

Getting rid of small black lines

I have mpg-2 video that im converting via mediastream clip. but no matter what format i conver too (DV,Mp4, Mov) I always get these very subtle tiny black lines that run horizontally across the screen when the camera moves. Anyways to get rid of them? I don't know much about video editing but i think it may have something to do with interlacing? any help would be great

instead of executing your progs with
java programName
use
javaw programName
i don't know or care how to do it with an IDE. if you're new, you should just be using an editor, maybe one that hightlight and formats, but that's it.

Black Line next to Flash Video

Hi,
Just a quick query regarding flash video. I have tried two
methods of getting a flash video to work but I am still having the
same problem. Next to the flash video to the right hand side of it
I am seeing a black line like a border, but it is only on the right
hand side.
I have imported the video in flash 8 and chosen a player skin
which all works fine. But when I export the flash swf file i see
the black border on the right hand side.
I am also tried importing the video directly in dreamweaver.
Again, I choose the skin and other options and when i preview the
html page i see the right hand side line border again.
I am completely confused as I have another swf file which
uses the same flv which does not have the black line - so it must
be something I am doing?
Can anyone help?

Hi Mike,
Thanks for your reply. However, as I said above, I have one
swf file (which was created by someone else and I ca not edit)
which uses the same flv to power the video played in the swf which
does not have this black line. But when I set up a new fla with the
flv in it and then export i get the line. I had thought it was part
of the original video but it is not showing in this other swf?
Any ideas?

What is the meaning of the black line in the Layer 2 View?

In the layer 2 View,there are many black line indicate "Ethernet 100M",what is the meaning?Does it mean the device is an end device that connected PC only?

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.

What causes my mac computer screen to flash scramble words and black line across the screen when on the internet

my computer when on the internet cause black lines to show up accross the cuputer screen and word scrambled. How can I stop this from happening

Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
Sleep function OS X Mavericks:
   http://support.apple.com/kb/HT5869

HP Officejet Pro 8500A Plus - vertical black lines only when autofeed

I have multiple black lines (darkest about 3 inches from left) when I autofeed a print document. When I feed a clean sheet, I get the single dark line. There are no lines if I copy using the top glass, I followed the HP autofeed cleaning instructions TWICE. The white rollers were clean and only slight black smudge on the black rollers. I am certain this has happened to others...Oh yes, my HP warranty expired in late March (Costco may cover it if this is not a simple fix).
I would appreciate any assistance, as this has been a great printer.

This article should help out with the problem you are facing. Give the steps outlined a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Ssrs 2008 r2 black line incorrectly being displayed

In an existing SSRS 2008 r2 report, I just added a page header so that I can display global values in the page header like run date, run time, and page number. Within the report header, I placed all the report header data within a rectangle. Now when I run
the report, there is a black line appearing after the report header but before the details of the report.
I have changed all the border colors to be white and the borderstyle to none. The black solid line between last part of report header to before the detail data keeps appearing.
Thus can you tell me how to keep this black line from end of pageheader or rectangle to before the detail data from appearing?

Hi wendy,
According to your description, I taken a simple test in my local environment (SSRS 2008R2). In my scenario, I insert a page header in the report, then use a rectangle to contain all the items (such as global values) within the page header after creating
a table in the report body. While everything goes well, and there is no such a black line between page header and report body.
As per my understanding, may be you have set the BorderColor property to Black and BorderStyle to Solid of Page header or Rectangle or Report Body. So we can double check those item properties in the report.
If this issue still exists, could you please post the .rdl file and your dataset with sample datato us by the following E-mail address? It is benefit for us to do further analysis.
E-mail: [email protected]
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

How to remove the black line from a stacked canvas at run time???

Hi All,
I've developed a stacked canvas within a content canvas, when I run the form the stacked canvas apeared with a black line takes it.
How to remove this line or how to disappear this line at run time??
I tried to do this by putting (no line) in tools palette to the line color tool after selecting the black line one and after selecting the stacked canvas another once, but this did not resolve the problem!
I need something else:
I put the stacked canvas at detail data block and it didn't appear since I execute query in master data block
How to appear the stacked canvas directly before executing query in master data block???

Hi,
u mean the border line? In stacked canvas property, select contour/outline and set it to none.
Make sure, the stacked canvas is behind the content canvas in the objectnavigator. Then check your
properties of the stacked canvas:
- Position on content canvas
- size
- size of clipping
Set stacked canvas property automatic visible to yes.
Make sure the stacked canvas is not overlayed by other stacked canvas or items.
Attackwave

HP Laserjet Pro MFP M12fn, printing a solid black line on every paper

I'm running windows 7 professional. I haven't received any error messages and nothing out of the oridarny has happened. My printer/scanner/fax/copy (My HP Laserjet Pro MFP M12fn, product # CZ181A) is printing with a black line down the entire paper, but its only doing it thru the feeder and not on the glass. HELP, How can I fix this?

Welcome to the HP Forums angelinaOO7,
I read your post, which indicates that you are getting a black line down the page when using the feeder. You can print fine from the glass. I can help you with this.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Clean the scanning glass and platen.
Turn the printer off.
Disconnect the power cord from the product and the wall outlet.
Open the scanner lid.
Clean the following scanner areas with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.
Main scanner glass.
Small scanner glass to the left of the main scanner glass.
White plastic backing.
Dry the glass and white plastic backing with a chamois or a cellulose sponge to prevent spotting.
Plug the power cord into the product and the wall outlet.
Turn the printer on.
Try to make another copy.
If you are still having issues, then update the printer's firmware.
HP LaserJet Pro MFP M127fn Drivers.
Select your operating system, click next, click the link for firmware.
If you need further assistance, let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP 3800 Color LJ Prints 2 black lines. Pic Included

Hi,
I have a HP Color LaserJet 3800. Since last summer it has been printing 2 black horizontal lines across every page. They are always in the same spot, so I'm thinking it is just something that needs to get cleaned and have ruled out the cartridges. (They have all been replaced multiple times since the issue first started). This happends with and without using the duplexer.
I took out the fuser? I think that's what it's called from under the front cover (It was really hot) and cleaned it with a moist papertowl, but that did not make any difference.
Any suggestions on what to clean or where the parts are located? I'm a noob when it comes to working on printers, so a step by step/diagram/pictures will be the best way to explain,
Here is a picture of what the pages look like, I have circled the black lines:

Scratch that, I looked at the manual and found how to open a part to fix a paper jam. There were two rollers in there that fit perfectly with the lines. I cleaned them up and now no more black lines.
Fyi, to get at the rollers I had to open the front of the printer, then on the bottom of the inside are 2 green tabs. I pressed them and lifted up the plastic piece to reveal these rollers.

I have a HP Officejet Pro 8500A with black line problems

My HP Officejet Pro 8500A has a problem when documents are placed on the automatic feed. The printed document comes out with a black line down the middle of the new printed document. Today it has started putting black lines down my printed pictures that come from my computer. The computer is less than one month old. HELP!!!

This model has separate ink supplies and printheads. Ink is required in all the colors to keep the printheads and plumbing from clogging. See this page for information on how ink is used.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Thin horizontal black line at BOTTOM of page when scan on HP Officejet Pro 8600 Plus

I owned an HP Officejet Pro 8500 and scanning was perfect. I recently purchased an HP Officejet Pro 8600 Plus.
When I scan from the HP 8600 auto document feeder, I get a thin (several pixel wide) black line along the bottom edge of the resulting scan. This line will sometimes be slighly crooked or only appear across half the page, in which case it tends to get thicker toward the edge of the page). I believe this line is an artifact from scanning the very bottom edge of the oroginal document. I think it is showing where the bottom edge of the page was when scanned. If the document is a little skewed, then the black line at the bottom will be a little crooked, probably following the edge of the page. This problem is consistent, and repeatable. It happens in both "Scan To E-mail" mode and "Scan To Network Folder" mode.
When I scan from the flat bed, I get a very narrow black line along the very top edge of the resulting scan, but the bottom appears fine (although I've not tested this extensively).
These thin black lines did not occur when scanning from the HP 8500.
I am wondering if there is a setting to adjust this, or if it is a firmware difference between printers that needs debugging.
This question was solved.
View Solution.

I find it interesting that the issue happens across both printers. This is what leads me to believe this is something with the software/connection with the PC. One thing I will note is that you mentioned above using Adobe Reader 10.1.6. The latest version of Adobe Reader is 11.0.02. I would advise removing your current version of Adobe Reader and install the latest version.
I am not sure if this will fix the issue as you mentioned the line comes across in jpeg and other scanning styles. Do you possibly have another PC you could try setting up a connection with quickly and attempting a scan? This would be another way to ensure if the issue is coming from the printer or a connection/software issue.
I would like to make sure the issue is coming from the scanners on these printers before returning the printers as I would hate for you to get another model printer and the issue remain with this printer as well. However, I will note that the Laserjet Pro 200 is a nice series printer from my experience. I have used the Laserjet Pro 200 black and white only edition, the MFP, and the TopShot edition where I am located.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

How to fix black horizantal black lines on 2010macbook pro 17' screen?

Hi everyone!
I come to the community for help after looking everywhere on the internet. I've had a problem now with my computer for a while where these strange black lines (always horizontal in nature) appear on my screen. I have two pictures below:
http://i1250.photobucket.com/albums/hh521/violentfirebomb/blacklines02_zps5de5cc 51.jpg
http://i1250.photobucket.com/albums/hh521/violentfirebomb/blacklines01_zpsfe260c 8d.jpg
These black lines will appear out of no where and they won't go away unless I select whatever is there and move my mouse. If it's across some font, I can select the font and easily go over the black line and it'll disappear.
Also, the more permanent things is random drop shadows from open windows won't work or the shadow won't work in places. Sometimes the font below a folder or above an icon on my dock will just be gone, like a chunk of it missing the size of those black lines you see in pictures above.
Is it something I can fix? Should I take it into the genius bar? My computer is a 17' Macbook Pro from 2010 and I'll be honest, this never happened until I upgraded to Mountain Lion. I even reinstalled Mountain Lion but the black lines and random text as well as drop shadow disappearances have returned.
Let me know what everyone thinks! I'd like to solve this mystery as quickly as I can! Thanks in advance.
Leslie

When you have problems with the display, there are usually three possibilities: The wire connection is faulty, the display is faulty or the GPU is having problems. All are are hardware issues that cannot be solved by software and generally do not fall into the do it yourself category.
Ciao.

Tiny Black lines in SWF

Similar Messages

Maybe you are looking for