Tiny Troopers 2 (iPhone and iPad Game) saves are not being synced to both devices. No option is given to load the iPhone save onto my iPad. Why is this?

Tiny Troopers 2 (iPhone and iPad Game) saves are not being synced to both devices. No option is given to load the iPhone save onto my iPad. Why is this? Can anyone explain or help me with this problem?

SkyzThaLimit wrote:
Normally it gives the option via iCloud sync (infinity blade, tower defense)
It is an option that the app developer has to decide to offer.

Similar Messages

  • I cannot sync my Notes between my ipad, my iphone and my mac, despite setting Notes to sync with iCloud

    I cannot sync my Notes between my ipad, my iphone and my mac, despite setting Notes to sync with iCloud. Any Suggestion?

    perfect. ok do the following:
    settings > mail, contacts, calendars > go into the exchange account. You should have an email in the account field...[email protected] or [email protected], etc.... I am assuming you don't remember the password to this exchange account so once you know the email, you can go to email providers site and click on forgot password and you will go through the steps to get a new password. Once you do this, you will need to go back into your "exchange account " and the field that has the exchange email > touch the > to open settings. Change the password to your new password you got from above. Once you do this, you can add the exchange account to your ipad and all of your contacts will sync to both devices.
    Please confirm.

  • Notes from iPad and iPhone are not being synced to my Mac with iCloud

    I have been really hesitant to even use iCloud, but i just started to try to use it yesterday - and my Notes from my iPad and iPhone are not being synced together, and both Notes from my iPhone and iPad are not even being seen to my Mac.
    What am i doing wrong with this?

    Welcome to the Apple Community.
    First check that all your settings are correct, that notes syncing (mail and notes on a computer) is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
    Make sure the notes you are adding are added to your 'iCloud' account and not an 'On My Mac', 'On My Phone'  or other non iCloud account (you can do this by checking in accounts on an iOS device, or the left side panel in mail on a computer), non iCloud notes will not sync.
    If you are sure that everything is set up correctly and your notes are in the iCloud group, you might try unchecking notes syncing (mail and notes on a computer) in the iCloud settings, restarting your device and then re-enabling notes syncing.

  • Last played and number of plays are not being set.

    Last played and number of plays are not being set.  Suggestions?

    Yup, this.
    Judging from the number of tracks that iTunes 11 tells me it's played, versus last.fm's scrobbles over the last two days, iTunes is actually updating the play date/time and count about twenty percent of the time. I haven't been systematic about testing under what conditions it does and doesn't update, but:
    Some tracks from an album will be updated and not others.
    Once a track has failed to update once, it seems likely to fail again (some tracks have had five or six plays unrecorded by iTunes).
    Curiously, if you look at the play history in the Next Up drop menu, all the played tracks appear, updated or not.
    My fabulously intricate architecture of smart-playlisted-out-the-wazoo filters all goes awry, if the play data isn't properly updated.
    Guys, sort it out, eh?

  • I updated my iphone and restored, now it is not being activated as this cannot be done anywhere in India. the help desk at a store asked me to restore it but there isn't any restore button now!

    I updated my iphone and restored, now it is not being activated as this cannot be done anywhere in India. the help desk at a store asked me to restore it but there isn't any restore button now!

    A compatible SIM card would be from AT&T and would not work in India.  It sounds as if your iPhone was hacked to unlock it and when you updated it, the hack was removed, thus relocking it to AT&T.

  • Images and .properties(bunldes) files are not being found from my JSPs

    Hi,
    I have created .ear file by using ANT Application. And deployed into Oracle9iAS(OC4J). Here problem is that images and .properties(internationalization bundles)files are not found from JSPs.
    Here is my directory structure.
    public_html--->locale -->BusinessEntity -->businessentity_en_US.properties
    --->enterprise -->images -->knowldege.jpg
    --->BusinessEntity-->BEAdd.jsp
    in my jsp bundle(.properties)file is accessed like this:-
    <i18n:bundle baseName="/locale/-->BusinessEntity/businessentity" id="businessentity" locale="<%= locale %>" />
    in my jsp images accessed like this:-
    src="/enterprise/images/knowldege.jpg".
    In my working environment, without creating .ear file, images and .properties files are being found my JSPs. But if i create .ear file and after deploy, images and .properties files are not being found my JSPs.
    please let me know where i might did wrong
    thanks in advance
    srinivas

    Hi i am again. Here is my configuration files(server.xml and default-web-site.xml)
    server.xml :-
    <?xml version="1.0"?>
    <!DOCTYPE application-server PUBLIC "-//Evermind//DTD Orion Application-server//EN" "http://xmlns.oracle.com/ias/dtds/application-server.dtd">
    <application-server application-directory="../applications"
    deployment-directory="../application-deployments"
    >
         <library path="../tools.jar" />
         <rmi-config path="./rmi.xml" />
         <jms-config path="./jms.xml" />
         <log>
              <file path="../log/server.log" />
         </log>
         <transaction-config timeout="30000" />
         <global-application name="default" path="application.xml" />
         <application name="nalluri" path="../applications/trainiumear.ear" auto-start="true" />
         <global-web-app-config path="global-web-application.xml" />
         <web-site path="./default-web-site.xml" />
         <cluster id="-1640090707" />
    </application-server>
    default-web-site.xml:-
    <?xml version="1.0"?>
    <!DOCTYPE web-site PUBLIC "Orion Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">
    <web-site port="8888" display-name="Default Oracle9iAS Containers for J2EE Web Site">
         <default-web-app application="nalluri" name="Commonwar" />
         <access-log path="../log/default-web-access.log" />
    </web-site>
    thanks in advance
    wating for reply
    srinivas

  • My notes are not being passed from one device to another

    My notes are not being passed from my ipad to my ipad mini.

    There can be several different accounts in the notes app if you have email account that allow you to sync notes. I do not use iCloud email, but I have two IMAP email accounts that sync notes. I wanted to know if you were selecting the correct account on the Mini.
    When you launch the Notes app, you can tap The Account button in the upper left corner in order to switch between accounts. If you do not have another Notes account, try turning Notes off on the Mini in Settings>iCloud>Notes>Off. Restart your iPad, go back in and turn Notes on again.

  • If I have forwarded all of my other email accounts to iCloud.  How come emails sent to me are not showing up on my devices? (yes, iCloud is set up on iPhone/iPad)

    I was in the Apple Store today because I was getting duplicate emails on my Mac and on my iPhone.  So they encouraged me to just use iCloud.  I then went to Gmail and changed my settings to forward my email to my iCloud account.  I have received nothing on my iPad or iPhone and the emails are just going to the corresponding inboxes on my Mac. 
    What is going on?? 
    Jane

    deltajane wrote:
    My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream.  I did see everything there several weeks ago, so I know it worked. How do I access those from my computer.  I can't find how to sign on. 
    This is the article that will assist with this part of your post:
    http://support.apple.com/kb/ht4486
    deltajane wrote:
    I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
    What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
    deltajane wrote:
    I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
    Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

  • Messages are not coming through on both devices.

    My question is this: Why am I not receiving messages or FaceTime calls on both my Mac and my iPhone? iOS8 on an iPhone 5 and 10.8.5 on the Mac. I'd love to get this working again. It used to. I have a guess what it is… I'm looking for direction.

    Hi,
    One gets a message, the other does not.
    That was implied in the first post which Eric asked you to clarify.
    Technically they are different apps  and sometime require different actions to fix them.
    In theory you can use different Apple ID in Messages for the iMessages account and FaceTime.
    However if you use iMessages on the Mac and want to switch to FaceTime using the Video icon then you may confuse the Contact as the incoming identifying info is likely to be different and they may refuse connection.
    Lets presume the Mac gets the iMessages but the iPhone does not.
    On the iPhone Settings > Messages and check the iPhone number is ticked as a Send and Receive ID in the Send and Receive part.
    Although this should be ticked (once the Messages app in On) and greyed out (the User can't access this) it can sometimes lose the setting (I have seen it twice now and the last time was the General release of Yosemite).
    In the case where someone send to the iPhone Number on the sync version will  show on the Mac.  (it does not transfer to the Apple ID and repeat back to the iPhone that way).
    Remove the Apple ID from the iPhone.
    Turn the Messages app Off.
    Set the iPhone to Airplane mode to break with server.
    On "restarting" the iPhone after a few minutes Restart the Messages app.
    Wait until it has Verified.
    Then send (from the iPhone Number as you have no other choice) to the Apple ID (So the Mac gets it).
    Return an iMessages so you know the iPhone is receiving (it will send to the iPhone number in a chat opened this way)
    Add back the Apple ID.
    Restart the Mac version and accept the pop ups about the info the iPhone is using.
    If these is not the issue you will have to be a lot clearer in your info.
    (we cannot see over you shoulder to be able to help in this case)
    9:15 pm      Saturday; October 25, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • TS2818 I have purchased songs from iTunes and when I sync with my Ipad only some are imported....then it says contact Itunes as to why your songs are not being synced.

    I have purchased many songs on Itunes and then I sync to my Ipad. Then it tells me so many songs cannot be synced.  Why? I also attach my connection and it is now saying this iphone is not connected when it is an Ipad connected to my MacBook Air.  I also think that when you have an account with Apple they should honour your email to all your music and not just your laptop as I now have to use my old laptop which is about to die so what happens then. 

    What is the exact wording of the error message?
    Were all songs purchased by the same iTunes account?
    What did iTunes say when you contacted them?
    http://www.apple.com/support/itunes/contact/

  • TS1538 I have the new version of itunes and my ipad, my daughters ipod touch and her ipod mini are not being recognized when we plug in to itunes

    I want to sync my iPad and when I plug the USB cable to it, itunes doesn't recognize it.  I have the latest itunes version, I've turned off and turn back on my iPad, I've shutdown and restarted my computer a few times. I just bought a few tv shows and it just won't sync.  I was able to sync my old iPod touch, but my daughters new iPod touch is not reconized and neither is her new iPad mini.

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • I dropped my iphone and it no longer turns on. when i plug it in my charger it just keeps making the charging noise. can i do something about this?

    i plugges it to my computer but still a black screen after i hold the home and lock buttons.

    You damaged the phone. Buy a new one or pay for an out if warranty replacement at an Apple store.

  • Avast antivirus page and microsoft web pages are not being loaded

    whenever i try to load www.avast.com or www.microsoft.com i get an error page saying server problem

    whenever i try to load www.avast.com or www.microsoft.com i get an error page saying server problem

  • My ipod nanos are not being recognized in iTunes. I have tried everything! Changed the drive letter, the disk to FAT32, resetted it, downloaded itunes again, but nothing has worked! HELP please.

    Somehow my nano now lost all its music so now its empty!  Also, before windows used to recognize my ipod and i'd get a pop up saying "open to view files" but now I don't even get that anymore. I have also tried syncing it by putting them in disk mode but NOTHING has worked. I am getting so frustrated.
    I followed all of the "steps" on the apple support page but none of that has worked too. PLEASE help me because I literally feel like just throwing my ipods out the window. I never had this problem before.

    When you connect your iPod to your PC, what appears on the iPod's display?  Does the iPod charge when you have it plugged into the PC?
    Are you running the latest version of iTunes (10.6.3)?  It wouldn't hurt to also make sure your Windows OS has all of the latest patches and updates as well.
    I assume you have plugged the iPod ino different USB ports located directly on your PC and tried using another 30 pin dock connector cable to rule out the possibility of a bad cable?
    B-rock

  • Endpoint Definition Updates are not being synced

    Hello all,
    As of last week, our ConfigMgr clients have been falling behind on the Endpoint definitions. It was brought to my attention when a particular definition was "causing issues" so I checked the server to see if we had a more recent one. It did, so
    I had the person click "Update" in the SCEP console. It said no updates were needed. The same message came up when running a managedupdate via CMD. If I pointed to -MMPC in the CMD manual update, it downloaded a much more recent definition.
    I looked at CM components, log files, etc and all looked "green" and healthy. I could sync updates, and it found new updates for other products, but never any SCEP definitions. After banging my head against the wall for awhile I went into WSUS
    itself and to the update catalog via Import Updates...the most recent one in the catalog (that I see) is 1.173.2497.0, so I assumed that my CM SUP/WSUS was indeed working correctly, and that the catalog is just behind the MMPC definition.
    However that was yesterday, and I still haven't pulled any new definitions and the catalog is still show .2497, while if I update SCEP via the command line with -MMPC it comes up with a much newer definition file. 1.173.3.0 to be exact.
    This has been working just fine since we implemented CM2012 last fall, and only recently stopped syncing these updates.
    Has anyone else seen this before?

    Thanks for your reply, Jason. To answer your questions,
    Are you using an ADR for your SCEP definitions? Yes, and it runs successfully after each sync that returns 0 new updates
    What's the latest definition showing under All Updates in ConfigMgr? The latest was the .2497 in the "All Updates" list for two entire days
    Assuming you have a single Software Update Group for the definitions, have you reviewed the deployment on this group? You assume correctly, and the deployment was still active
    Have you reviewed the package where the definitions are stored to ensure it is properly distributed to the DPs?
    The package still contained that "old" .2497 definition, and was successfully distributed to all DPs.
    All this said, I noticed this afternoon that the SUP/WSUS (same box) itself had a GPO configuring itself as the WSUS source (WUServer and WUStatusServer registry entries were listed under HKLM/Software/Policies/Microsoft/Windows/WindowsUpdate). This isn't
    supposed to be set, as per the documentation, and I deleted the registry keys and ran a sync and was immediately emailed with "new update alert" from the WSUS/SUP server that it had new definitions.
    I know having this GPO messes with WSUS clients if that GPO sets the update source, instead of letting the CM client manage that, but would it affect the actual synchronization ON the server? I wouldn't think so, and maybe this was just dumb luck,
    but it immediately downloaded the last 5-6 definitions that had been missing, all the way up to 1.173.2518.0
    I didn't disable the GPO just yet- I want to see if it stops syncing when it reapplies. It had been set for a long time I imagine, so I don't know why it would break
    now, if it was the culprit.

Maybe you are looking for

  • How can I access deleted photos from my iPhoto Library Cache?

    My Macbook Pro broke about a year ago and I recently took the hard drive out to access the files. I have a hard drive enclosure to USB to my Acer (Windows) Laptop. I was looking through all the folders when I came across this: D:\Users\Lizee\Library\

  • Firewire to internal hd crashes OS.

    The title says it pretty much. This is my second error I've had trying to move a folder from an external firewire drive to my second internal drive. Apple phone help proved less than helpful, anyone here have any ideas or sharing similar problems? I

  • Cannot connect to OS X Server via ARD after 10.6.4 Update

    Hi there Just updated my server from 10.6.3 to 10.6.4. Everything is still fine - except the fact that my Remote Management seems to be dead now... "Remote Management" is definitely on. But on my Client(s), the server is not recognized and its status

  • Is there an oracle forms developer 11 g please ?

    I use oracle forms developer 10g with database oracle 10g . I would like if any upgrade is required to use oracle forms developer 11 g for developing applications . Thanks.

  • Finger print sign in option does not work

    I am trying to set up a sign in on my profile to use my finger prints. When I try to scan my fingerprints, I get the message, 'Fingerprint sign on is disable. Contact system administrator.' I am the system administrator according to my account. How d