Tiny video TOO BIG for YouTube?

I'm sorry--I searched for "compress video" and got no results--so--
I have a very short (1.09 minute) video I want to upload to YouTube. It is 122 MB. YouTube has a 100 MB maximum capacity. I've seen 10 minute videos on YouTube, yet my tiny 1 minute video is too big. How do I make it smaller so it will upload? I'm so sorry if this has been discussed before, but I get no help for this on my Mac Help section--thank you!

If you have Quicktime Pro you can export it and reduce the size. Or use VisualHub in its demo mode (2 minutes max) to covert to a smaller format and size. It works quite good.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Similar Messages

  • PC - TV [Video too big for TV Screen.]

    Hi,
    I'm running Windows XP with an FX 5200 128 Video Card. I have an S-Video plug that turns in to a Yellow RCA wire and plugs in to my TV. I have my display properties set to "Clone".
    When I play a video using Windows Media Player, I can see it on my Computer Screen as well as my TV.
    However, the picture on my TV seems to be slightly cropped. It looks like I am missing the TOP and SIDE portions of the Video. The video fills the entire TV screen, but it looks like the picture is too big for the TV and I'm not seeing the edges.....
    Any suggestions,
    Thanks,
    Andrew.....

    make sure you're using the correct display drivers from nVidia Drivers
    then in the driver control panel for your TV settings, use the zoom controls to adjust how the picture looks on your TV

  • Downloaded Video Too Big for Screen

    From YouTube I downloaded the Mozart opera "Cosi Fan Tutti" as an MPEG4. The resulting video image is nice and clear with good sound, but it is larger than my screen. The usual video controls such as play, pause, etc are below the bottom horizon and cannot be seen and some of the picture is off screen to the left or right.  The Zoom in Universal Access is turned on, but Control-Minus has no effect other than to give me a little blip noise. Is there a way to control the size of the Quick Time Player image? ( I am using 10.4.11 on a late 2007 iMac because of some antiquated software I must have access to.)

    Unfortunately, YouTube's terms of use forbid downloads unless there is a download button offered, so we would be violating the ToU here if we were to discuss it.

  • The size of my exported FCP movie is too big for DVD studio pro

    Hey,
    I have been editing for 4-5 years now and have never had a problem with size of a project to put into DVD Studio Pro to burn. However, I just finished a 2 hour project in which exported as a FCP movie it is 23.97 gb in size. When i put this into DVD Studio Pro it makes it 4.8gb in size which just makes it too big for it to burn. I have tried changing the compression to no avail and just now decided to clean up the timeline so everything is on one track with nothing overlapping. (The problem was it was a 2 camera shoot so the first camera i had on the bottom track constant with the second camera on the top track when i needed it but still with the first camera underneath.) Do you think this could be the solution to my problem? If you guys could help me out it would be most appreciated!

    some things don't make sense here. please clarify.
    Standard DV is roughly 5 minutes per gig, so that means that you have just about 2 hours of video, ok, got that. Now it's the two track thing that gets me.
    Are you saying you have 4 hours of footage, the same thing from two cameras, and you're trying to set up a multi-angle DVD?
    If it's just that you used two video tracks to edit, then NO, it is not your problem. It's still only 2 hours, the video will be mixed down to one track upon export from FCP to quicktime.
    My suggestion is, instead of bringing a quicktime file directly into DVDSP, use compressor. I believe they have a preset in compressor 2 for a standard 120 minute DVD. IF you're project is truly less than 120 minutes, than that should be fine. If not, then you may have to manually make your own setting and lower the bitrate.
    So the workflow is:
    -open sequence in fcp
    -file>export>quicktime movie... (you can uncheck "make movie self-contained" if you want it to export faster and you plan on keeping your original capture footage around)
    -export your movie to a directory of your choice with a name of your choice.
    -open compressor (in applications)
    -drag the quicktime file you created into compressors main window, this will set it up. Now specify the export setting (120 minute HQ all files either 16x9 or 4x3 dep. on project) and specify a location for the files to be created. I strongly suggest that you use the HQ (High quality) settings in compressor. It's much slower to process, but much better quality.
    -with a 2 hour movie it should take a really REALLY long time to compress, so I'de say do it over night.
    -when compressor is done, you should have 2 or three files. a .m2v file a .aif file, and a .ac3 file. The .aif is your PCM audio, much better quality than the .ac3, which is dolby 2 channel. However, the .ac3 is a much smaller file with a lower bit rate, so if the .aif makes the DVD file size too big, you can switch it out for the .ac3
    -Finally, open up your DVDSP project, drag the .m2v, .aif, and .ac3 into DVDSP and use the .m2v for the video track and either the .aif or .ac3 as the audio (as mentioned above)
    -the good news is, your DVD media is already rendered, so when you go to build your DVD it will go much, much faster!
    By the way, I recommend you go to file>advanced>build do not do a burn and build.
    I find it best to build the VIDEO_TS folder on a hard drive and then use a program like toast to create a DVD (using toasts from VIDEO_TS option). This method also allows you to go back into DVDSP, make tweaks, and reuse your VIDEO_TS folder, not having to rebuild the whole thing each time.
    Remember, 120 minutes on a single layer DVD is going to render fairly low quality no matter what.
    If you have a newer mac and a dual layer drive, you may want to cough up a few bucks and get a dual layer DVD-R, then you have over 8 gigs of space to work with, perfect for HQ 2 hour footage.

  • Sharp 26 inch HDTV too big for TiBook?

    I have a Sharp 26 inch LCD HDTV. I am running DVI output from the 667 TiBook into the HDMI video input. It works OK, but the margins of the video are hidden under the edges of the LCD. So for example, I can only see about 1/4 of the Dock because the rest is hidden. As a result, I can only run it as a second monitor.
    What's causing it? Is the screen too big for the TiBook's video driver?

    http://support.apple.com/specs/macbook/macbookmid2007.html
    "...Extended desktop and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 1920 by 1200 pixels on an external display, both at millions of colors..."
    What is the max resolution of the HDTV? You should consider the Apple mini-DVI to DVI adapter and use a DVI-HDMI cable if your HDTV has an HDMI or DVI input, generally the digital signal might be better quality than the VGA analog signal.
    You want to be able to match the native resolution of the monitor for best quality. When you use a different resolution, it may be supported but not appear as sharp. It might be hard to get good text quality on that large a monitor, but images and video might work okay.
    If you want, you can also run an audio cable from the MacBook lineout to use the TV or your stereo speakers.

  • 15 minute, 400 meg project too big for one DVD?

    I have a 15 minute video in widescreen format that is about 400 megabytes in size according to the project info.
    When attempting to burn, I am told that the project size is too big for a DVD and suggests I use a dual layer DVD.
    I have over 390 gig available on my 1 TB hard drive.
    I have no chapter markers
    I have reduced the intro clip(s) to less than 30 seconds.
    All to no avail. I am now burning the dvd using Toast, which is perfectly happy using 400 megabytes of my DVD to burn the disk.
    What assets could iDVD possibly be adding to use up the remaining 4 gig of disk space, and how might I view them and delete them?
    I know this is an old topic...I've read lots of posts including one similar to mine. In most cases people are attempting to burn over 1 hour of video. In the one case similar to mine, the person had full length video in each chapter marker (or some such issue). I have none.
    In my case it is a 15 minute video (granted its in HD/widescreen format). Why, with a project size well under the disc size, does it refuse to burn due to size limits? Clearly the project info does not reflect iDVD's actual size requirements for the project.
    Why not?
    Finally, changing to 4x3 is not an option and yes, I have tried changing the compression algorithm from best performance to higher quality, though this is supposedly for video longer than 60 minutes.

    Hi
    Free space only referes to Start-up (boot) hard disk. iDVD can't use any other for scratch files.
    25Gb is my minimum setting.
    15 minutes video - to much indicates that it might have been droped it into iDVD window
    but here landed it into a "button area" - not movie area.
    Recommendation in case of this is to move it out (or start a new iDVD project)
    and in iDVD use the Import function instead. Now it lands where it should.
    And dep on Your encoding choise the movie can be up to 60 or 120 minutes long
    (menu included => simple menu = more movie)
    Other alternative is feeding iDVD strange video formats that can give many
    interesting problems eg .wmv, .avi, .mpeg4 etc.
    Yours Bengt W

  • Time machine backup too big for empty disk??

    So I restart my MacBook Pro a few minutes after completing a full Time Machine backup.  When it restarts it goes through the grey startup screen, then gets stuck on the blue screen just  before the desktop normally appears. This happens whenever I startup. I am still able to hit the power button and get the Restart/Shut Down dialog, so I restart using my Snow Leopard boot disk, run Disk Utility, repair permissions, and repair disk, but the problem still remains. I decide to Restore from Time Machine Backup, so I erase my disk (80 GB, had only 200 MB free), go to the Restore screen and connect my backup disk. Now the weird part -- it says my latest backup is too big for the disk, even though i just erased everything, and 74.2 GB show as free. All my previous backups seem to fit fine, but apparently the last time Time Machine backed up more from my disk than can fit on my disk! It seems having a hard disk close to full is enough to render a backup effectively useless.  Guess I'll have to restore from a previous backup, then manually copy the newer files. Just wanted to alert others to this insane problem, so it doesn't happen to them.

    dgordon412 wrote:
    (80 GB, had only 200 MB free)
    That's likely corrupted your system. You should have a minimum of 10% - 15% free at all times. That's almost certainly why it wouldn't restart.
    even though i just erased everything, and 74.2 GB show as free.
    There must be something else on the drive; if you erase it, it should have just under 80 GB free. Is there another partition?
    Did you erase with a Leopard Install disc or a Snow Leopard disc? If you used a Leopard disc, that might explain showing only 74.2 GB free (it counts differently).
    If so, use your +Snow Leopard+ install disc to do a complete reformat, and try to restore the backup. A Leopard disc cannot restore a Snow Leopard backup. Even the Snow Leopard disc may not work, as it's just too full and/or your system was damaged by getting too full.
    All my previous backups seem to fit fine, but apparently the last time Time Machine backed up more from my disk than can fit on my disk! It seems having a hard disk close to full is enough to render a backup effectively useless.
    Having an OSX drive that full will make your Mac extremely sluggish, cause data corruption and/or loss, apps to crash, etc.
     Guess I'll have to restore from a previous backup, then manually copy the newer files. Just wanted to alert others to this insane problem, so it doesn't happen to them.
    If you can get your Mac running, you need to make several GBs of space immediately.
    If all else fails, reformat the internal HD and install OSX from your Snow Leopard Install disc, then use +Setup Assistant+ after the Welcome video to transfer +*most, but not all+* of your stuff from the backup. Omit the contents of one or more large sub-folders in a home folder (such as Photos, Music, or Movies).
    See #19 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for details.

  • How big is too big for swf?

    I have a swf file that has audio associated with about 15 slides. We were having some problems with it downloading and the people that host our LMS (Moodle) said that some of the problems may be related to our CP4 settings. I have the preloader set to 25% and the file is about 8.6 MB. They said to us:
    Usually when hand-coding a SWF I require 100% of the SWF to be loaded before the SWF begins to play.
    8.6mb is large for a SWF provided via progressive download. The optimum is no more than 5mb for users with a broadband connection. That may be part of the issue.
    Is 8.6 MB really too big for a swf? What is the maximum size this should be? If it is too large what else can I do to shrink the audio as I'm sure that's a great deal of what is making the file too large?
    Thanks very much,
    Whitney

    Hey Whitlowe,
    I had a very similar situation.  I received a 15 MB file from a "co-worker." The course was basically a converted PowerPoint into a Captivate course.  The course had 53 pages and had heavy audio.
    When I initially tried to publish it to my LMS the course took about ten minutes to load.  I’m not sure if you use another authoring tool but I used another authoring tool called "Tool Book" a SumTotal product.  I had to divide the captivate course into 8 SWF files.  I then used Toolbook as a wrapper.  The Tool Book file was 8 pages.  Because Tool Book can read each page as a different SCO, the SWF files loaded one at a time. 
    For future courses, I am looking at getting a streaming server.  I can house my audio on the server.  The course would launch as a shell but would link to a streaming server for the audio/video.  Not only will this improve load time but decrease my space on the LMS.  I am looking into this option and not positive what the results will be, but I thought I would throw it out there.
    That is the only solution I currently know of. I’m carious of any other solutions as well.
    Good luck.

  • When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

    Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

    I have the exact same problem, I think.  I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE.  So big I could only see one or two icons.  I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar.  I finally just had to wait for the battery to die, then recharge it, and it looked normal again.  I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them.  I checked my accessibility settings, and Zoom was already off.  So what is causing this problem for so many people, and what can we do to prevent it?  Please help.

  • I have my iTunes library on an external HD because it is too big for my iMAC 500GB HD. I want to backup my external HD. Can I do this with any Apple cloud product or should I look elsewhere? Also is it worth just buying another external HD to back up

    I have my iTunes library on an external HD because it is too big for my iMAC 500GB HD. However, it is not backed up, so I need a solution to backup my external HD. Can I do this with any Apple cloud product or should I look elsewhere for cloud products? Will it be cheaper/easier just to buy another external HD to back up my existing external HD? Thanks

    I don't know if this is me adding files to iTunes when the external wasn't connected
    it is.
    is it OK to just keep deleting that library on the Air?
    i wouldn't - at least not until i
    mount the external
    point iTunes media folder location back to the external via preferences > advanced
    consolidate my library via file > library > organize library
    The ntfs hasn't seem to be causing any problems, but I've always wanted to know.
    in order for your Mac to write to NTFS drives, it needs some help by installing e.g. the NTFS 3G driver. apparently that or something similar is installed on your Mac already. preferably, it would be formatted for Mac but then windows machines would need to have e.g. MacDrive installed to recognize the drive.

  • Why does is say purchaseable items too big for download every time I try to download an app?

    Every time I try to download a game or app my iPhone says error message purchasable items too big for download. I even changed my billon information. Anyone know what the problem might be?

    Connect your iPad to iTunes on your Mac/PC and then go to your iPad's summary window. Then click back up if you want to back up your iPad first. After that click restore. Later it will ask you if you want to setup the iPad as a new iPad. Select the option to setup your iPad with your latest back up.

  • I used a GarageBand loop in a video I made for youtube. I want to submit this video for revenue. First, is this legal? Second, youtube requires written permission to use songs, and provides a comment box for proof of permission. What do I put in this box?

    I used a GarageBand loop in a video I made for youtube. I want to submit this video for revenue. First, is this legal? Second, youtube requires written permission to use songs, and provides a comment box for proof of permission. What do I put in this box to prove It's ok for me to make ad revenue from my video?

    Yes, you can use GarageBand loops for commercial purposes. Here's the Apple Doc:
    http://support.apple.com/kb/HT2931
    (Basically the only thing it excludes is to re-distribute the loops as loops.)
    I don't know about the YouTube form, maybe you just fill in "Apple Loops", they certainly have come across this before.

  • What is the best way to record a video(not big) for free on a mac w/isight?

    What is the best way to record a video(not big) for free on a mac w/isight? I need to just make a short (less than 5 minute, no special effects) video, but I can't figure out any programs that will make this possible for me.
    Thanks.

    Hi Carolyn,
    you can use iMovie to record a video for free on a Mac with iSight.
    1. Open iMovie HD
    2. Choose “Create a new project”
    3. Name the project for example “iSight Movie” (first field). In the second field, let the default location “Sequences”, in the third one, video format, choose “iSight”. Push “Create”
    4. iMovie window opens, next to the scissors, choose the camera (Camera mode), then iSight. Now you appear on the screen, right?
    5. Press “Record with iSight” in the main picture window.
    6. Press the same button to stop. Your new clip appears now in the clip panel at the right.
    7. You are done!
    iMac G5 PPC 2,1 Ghz   Mac OS X (10.4.8)  

  • A document page opens that is too big for the display and runs off the end of the monitor

    How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Sim card too big for ipad air?

    i have taken delivery today of a new ipad air but even the mini simcard seems too big for the holder, is it safe to still put it in?

    No. The iPad Air uses a Nano Sim. A Mini sim will not fit in the tray.
    You need to talk to your Cellular carrier and have them give you a nano sim for the new iPad.

Maybe you are looking for