Tinymce - does anyone have it working in cfform?

Downloaded today. successfully works <form> but not
<cfform>.... can anyone help?????

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks,
Yog Li
TechNet Community Support
How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful.  The question remains, Does anyone have it working?
People have given troubleshooting advice, but nobody has actually answered the simple question.  Do they have it actually WORKING?

Similar Messages

  • SCOM 2012 SNMP Trap - Does anyone have it working?

    I am wondering if anyone out there has had any luck with getting SNMP Traps to be captured by SCOM 2012?  Probes work fine.
    We have been unable to get SCOM 2012 to receive a SNMP Trap from network devices.  We currently have a case open with Microsoft, but they dont have any answers as of yet.
    Here are the cliff notes version of what we have done so far.
    Discovery - OK
    The nodes discover without issue.  I made sure they were set to SNMP only.  I did this to verify we were talking SNMP and not just ICMP.
    Open Ports/Firewall Issues
    No firewalls are in place on the SCOM server and none exist between devices we are trying to get traps from.  Using a port tool, I can see that UDP 162 is listening as expected and its the System Center Management Host Process that is running the
    process.  We have tried having SNMP installed, but disabled, installed and running, and uninstalled.  Currently we have the SNMP service installed and running.  The SNMP Trap Service is NOT installed.
    Data Validation
    Using Wireshark running on the SCOM box I have been able to validate the OIDs we are searching for are hitting the SCOM server.  I installed an SNMP Trap generator and Receiver on my local machine as well as Jalasoft SNMP Simulator.  I was able
    to discover my local machine as a network device and if I send a TRAP from the TRAP generator on my local machine to the receiver on my local machine I can validate the data is coming through ok.
    What has been done on SCOM side
    The simplest place to look for data is with an Event Collection Rule and then an Event View Monitor.  We have set up an Event Based Monitor to search for an OID that I know to be accurate and then I set up an Event monitor to look for
    anything hitting that Collection Rule.  The Event monitor showed nothing so we changed the EVent Monitor to look for anything that hit Node which should show any SNMP traps that have hit from network devices.  No results.
    We tried to run WFAnalyzer from the 2007R2 Authoring Console, but it wont run against 2012 and from what I have found the 2012 edition doesnt exist anywhere yet.
    So has anyone succesfully received a SNMP TRAP into SCOM 2012?

    Hi,
    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
    In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
    Thanks,
    Yog Li
    TechNet Community Support
    How could you possibly mark this as answered? No answer was given, it was quiet for a couple of days including one of which was a holiday in the US. The previous steps are NOT helpful.  The question remains, Does anyone have it working?
    People have given troubleshooting advice, but nobody has actually answered the simple question.  Do they have it actually WORKING?

  • Does anyone have a working amtlib.dll files for Primere Pro CC and After Effects CC?

    I have had problems when installing it, it s saying it is missing the amtlib.dll file (on both) I do have PS CC working, but apparently PPCC and AECC require different amtlib.dll files
    Please don't post any spam links :/
    Thanks!

    download the installation files and properly install your apps.
    you might want to uninstall and clean before doing that (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6).
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Does anyone have bluetooth working? [solved]

    I can't believe this. For months I can't even use a bluetooth mouse!
    Once working fine, then there appeared to be a bluez issue, so I got the latest release 4.40
    got my /var/lib/bluetooth/MAC/trusts file and finally had my mouse back until...
    after a few minutes it lost the connection and refuses to reconnect.
    Now kbluetooth won't start, that is, it doesn't appear and says it's already running!
    I've tried blueman but that wants to pair the mouse with a passkey.
    So if anyone has a working kbluetooth please post the configuration here.
    Many thanks!
    Last edited by subatomic (2009-06-28 14:46:16)

    I had the same problem, my bluetooth mouse stop working when I upgraded to bluez 4.x
        $hidd --connect xx:xx:xx:xx:xx:xx --server
    is deprecated and documentation about bluez ActivateService is not working with bluez4.x:
        $dbus-send --system --print-reply --dest=org.bluez /org/bluez org.bluez.Manager.DefaultAdapter
        Error org.freedesktop.DBus.Error.UnknownMethod: Method "DefaultAdapter" with signature "" on interface "org.bluez.Manager" doesn't exist
    Google suggest me to install d-feet and look into dbus to correct the python scripts and finally I got my bt mouse back again.
    bt_mouse_create.py:
        import dbus
        bus = dbus.SystemBus()
        manager = dbus.Interface(bus.get_object('org.bluez', '/'), 'org.bluez.Manager')
        adapterpath = manager.DefaultAdapter()
        adapter = dbus.Interface(bus.get_object('org.bluez', adapterpath), 'org.bluez.Adapter')
        devicepath = adapter.CreateDevice('xx:xx:xx:xx:xx:xx')
        print devicepath
    Replace xx with your mouse's mac
    Run once and take note about the output string.
    Replace it in the next script.
    bt_mouse_connect.py:
        import dbus
        bus = dbus.SystemBus()
        devicepath='/org/bluez/7077/hci0/dev_xx_xx_xx_xx_xx_xx'
        device = dbus.Interface(bus.get_object('org.bluez', devicepath), 'org.bluez.Input')
        device.Connect()
    I Hope it works for you too.

  • Does anyone have SSL working with the Sun Java System App Server PE?

    We have been having problems (to say the least) getting SSL to work with the Sun Java Application Server 8.1 Platform Edition.
    We have a signed certificate from VeriSign and have it imported correctly, but when you test it by going to https://localhost:8182/ (note that 8182 is the port set up for SSL) you get a warning mesage saying that the certificate cannot be verified. When you view the certificate you see that it is the one that got automatically generated for you by the app server and not the one we purchased from VeriSign.
    So, I was just wondering if anyone out there has gotten this to work and if so, what document did you follow to tell yoiu how it was done!
    THANK YOU!

    once apon a time i had a real problem with the same issue.. best of luck.. i forget now how to fix.. sorry.

  • Netgear Readyshare Print - Does Anyone Have this Working?

    I have a WNDR4500 router with Netgear Readyshare facilities.
    It's supposed to offer easy network printing with a USB printer attached.
    I've been unable so far to get a USB printer to work.
    The supplied Netgear USB Control Center utility installs fine into Lion.  It detects and displays the printer.  However I do not know how to set up the printer on Lion.  I tried defining a printer queue using IP printing to default queue on the routers IP address.  This gets as far as showing me a print queue but all attempts to print result in the printer busy error.

    Same here. On both Mac and Windows I can't seem to get printing to my Canon MP600 to work. I filed a support ticket to Netgear...to be continued

  • Does anyone have Trash working with OD users?

    I think it is a general Dock issue but OD users are not seeing Having trouble with their Dock trash. You move files in and they either just dissapear (not in the Trashcan) but they are in the .Trash folder or they show up in the Trashcan but you can't empty the Trash.
    I have tried fixing it using 10.6 where the trash works fine with the user accounts.
    I thought it was an issue from my Server setup so I set up a brand new Mac mini wwith a fresh and clean Lion Server install and set up one test OD user and it has the same issue!
    Lately too some users who have their Downloads folder in the Dock are seeing their system lock up when Safari completes a download and the Dock icon changes. The Dock will take up 100% of the CPU and force quitting it will cause EVERYTHING to lock up with and nessisitating a force reboot.
    I was hoping 10.7.1 and 10.7.2 updates and then 10.7.2 combo updates would fix the issue not no it is still there.
    Between this and OD users seeing beachballs 30-60 seconds every time they open a document is a program that supports auto-save and versioning I am ready to migrate everyone back to 10.6 and start looking at Linux server alternatives for the future.

    Yeah, even the Secure Empty Trash workaround can sometimes have issues.
    I tried wih user homes stored locally and on an external drive. The only way I could get it to work is by creating a user and NOT setting a network home, then the trash would work. Makes me think it is a weird permissions issue on the client-end since 10.6 users work fine and no matter how the system sets or I set permissions on the Users directory I still end up with Trash and other issues.
    Between this and the beach-balling with auto-save/versioning enabled apps my Lion users are not happy campers.

  • Does anyone have GIMP working *properly* with Leopard?

    If so, how did you get it working? It is killing me that I can't use GIMP for the time being.

    I rarely use GIMP, but I did launch and run it in Leopard just to see if it would, and it did. I opened an image, cropped it, inverted colors, added a new layer, changed the mode of interacting between the layers, and resaved as a psd file. Everything seemed to be working fine. I just copied over the last version I had in Tiger and double clicked it. X11 launched, then a slight pause, the GIMP splash screen appeared, did its loading, and it was up and running. The Tiger version I copied was GIMP-2.4-rc3-intel, which I had downloaded a month or so ago.
    Francine
    Francine
    Schwieder

  • Does anyone have an applet that runs on Windows CE and connects via jdbc to lite DB

    I am trying to get an applet to connect to the Oracle lite DB
    I use
         if (conn == null)
         // Load the JDBC driver
    Class.forName("oracle.lite.poljdbc.POLJDBCDriver");
         conn = DriverManager.getConnection ("jdbc:polite:polite", "SYSTEM", "MANAGER");
         output.appendText ("Connected\n");
    but CE just echos oracle.lite.poljdbc.POLJDBCDriver and does not connect.
    Does anyone have any working samples? I am using Jeode JVM on the CE device

    We have the same problem with that platform, but we get a
    java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.oljdbc40)
    exception.
    Thank you in advance.

  • Does anyone have an idea of how to create custom gestures in DPS?

    Have any of you heard if Adobe will be allowing custom gestures (2-4 finger, different directions, unique movements, etc.) in the DPS InDesign software?  Or, does anyone have a work around for integrating custom gestures.  Here's an example, slide shows swiping that is triggered off an top to bottom gesture vs. side-to-side.  Thanks much you guys!-

    I created hours, minutes and seconds in three separate layers and lined them up to look like a digital readout (09:07:58PM) For the seconds, I typed in 59, 58, 57 and so on with a hard return after each. Then I keyframed the Y position of that layer to stay static for 1 second, and then increase over the course of 1 to bring up the next number. Then in Keyframe Editor, I chose After Last Keyframe>Progressive. The clock now counts down second by second. You could do the same for minutes and hours if your clock is on screen that long.

  • Epson 2200 on MacBook Pro - Anyone have that working?

    I'd like to run an Epson r2200 printer (I know it's old) with a MacBook Pro. Epson says the driver does not support Intel-based Macs, and they have no plans to update the driver. I've tried the GIMP driver, and it does not work. Does anyone have one working with an MBP (or any other Intel-based machine), and if so, how did you do it?
    MacBook Pro   Mac OS X (10.4.6)  

    What is an R2200? I'm familiar with the Stylus Photo 2200. The 2200 has intel drivers on the epson site:
    http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid= 14402&prodoid=20306147&infoType=Downloads&platform=Macintosh
    If this isn't what you're looking for then I'm not sure what the printer is.

  • I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from A

    I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.

    It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.

  • I have just updated to Yosemite, but now I can't get the custom shortkeys to work. In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution. Does anyone have the problem? All the other shortcuts work!

    I have just updated to Yosemite, but now I can't get the custom short-keys to work.
    In Mavericks I had no problem whatsoever, but now even after googeling and restart no solution.
    Does anyone have the problem? All the other shortcuts work!

    Hi Thomas,
    I can confirm the problem you are hitting. The XML test trace does not get recognized at all, and it defaults to Eclipse's basic Open File behaviour. I am not sure if it's because the format definition is missing, or if it's because something prevents the trace type from being recognized. I will open a bug about it.
    Thanks for identifying this issue!
    In the meantime, if you'd like to experiment with XML analyses, you can also take a look at the example at https://github.com/tracecompass/xml-analysis-example .
    Cheers,
    Alex

  • Ive tried every possible way to get my ready preorder of an album to download and nothing is working... ive checked recent purchases.. going to my computer.. and still nothing.. does anyone have an answer as to how i can fix this? i just want my music!!

    i have gotten my email that me preorder of an album is ready.. clicked on the link and got brought right to the home page of the itunes store.. went on my computer and checked all the recent purchases but i still cannot find my "purchased" music anywhere.. does anyone have an answer for me? im really aggravated.. a nice answer of how to get my already paid for album would be GREATLY appreciated..

    Hello nicolefromlisbon
    If the download link is not working to get your Pre-order, then report the issue to the iTunes Store.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I have a mac book pro.  Yesterday the mail app failed to open.  I have tried to open it fomr the dock and the application folder but nothing happens.  Does anyone have any suggestions to get it to work?

    I have a mac book pro.  Yesterday the mail app failed to open.  I have tried to open it from the dock and the application folder but nothing happens.  Does anyone have any suggestions to get it to work?

    You don't need iDVD unless you are going to make DVDs. If you are just trying to share files, iDVD won't help you at all.
    What you want to do is in iMovie, choose File/Share/File, and export that way. It creates an .mp4 file that should be readable on Macs or Windows.
    You could also File/Share/YouTube if you don't mind posting them to YouTube, because of course YouTube videos are watchable by any Mac or Windows computer made in the last 10 years.

Maybe you are looking for

  • Photoshop CS2 on Win7 Activation Server no longer available as CS2 not supported

    My XP PC died and was replaced by Win7 Laptop.  Loaded my legitimate Photoshop CS2 software, but Activation Server no longer available as CS2 not supported any more.  Need to run my CS2, so how do I make this happen?

  • Transport of ABAP Program

    Hello everybody, I have a Process chain which contains a bunch of Variants and ABAp Pgms and other process. Now when i transport from Dev. to QA all of the process and variants gets transported except one of ABAP Pgm. To be more clear out of 5 abap p

  • Listing

    Hi Gurus,, In Material Listing..... Is it Possible to display the Pop-up window when entering the material...??? IF yes How can???

  • Integration of Oracle BI Publisher with Oracle Business Intelligence Enterp

    Hi, I have started the tutorial " Integration of Oracle BI Publisher with Oracle Business Intelligence Enterp" today but got stuck at the very first step. The tutorial shows that I can see "SH" and "CountryManagers" in the shared folder but I only se

  • How do I stop Safari from unzipping downloading files

    Every time I download a zip file with Safari, it unzips it. I don't want them unzipped. I can't seem to find a way to undo the 'convenience' of modifying files I'm downloading.