[TIP] Always wipe when you are done :O
Something I came across today, a handful (like a hundred or so) of WiFi Xooms got sent out as refurbs but still had some of the previous owners personal data on them. Sooo, AndroidCentral.com posted an article about always wiping (or hard reset, or factory reset) your phone if you ever sell, throw away, donate, give to a friend, your old phone when you are done with it. Good advice, I would say, no telling where it will end up, or if the company you send it back to won't miss resetting it before sending it out as a refurb. The original article is here: http://www.androidcentral.com/gentle-reminder-erase-your-android-device-getting-rid-it have a read don't forget the SD card and, always wipe when you are done!
I wish the phones didn't have those water damage stickers on them. I'd use a bidet.
~D
Similar Messages
-
HI
i am keep seeing this message in ulsviewer of splogs in a webfront end server
Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before. Stack trace:
at Microsoft.SharePoint.SPWeb.get_Exists()
at Microsoft.SharePoint.WebControls.CssLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP._layouts_icc_icc_scan_view_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
adilHi,
Your SPweb object is not disposed properly.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3a25eb86-8415-4053-b319-9dd84a1fd71f/detected-use-of-sprequest-for-previously-closed-spweb-object-please-close-spweb-objects-when-you?forum=sharepointdevelopmentprevious
http://sharepoint.stackexchange.com/questions/50793/detected-use-of-sprequest-for-previously-closed-spweb-object-after-spquery
Please remember to click 'Mark as Answer' on the answer if it helps you -
I have develop a custom solution for SharePoint Foundation 2010 that provide PDF documents filled with lists data and attachemnts.
If the Customer run the solution to get the PDF we found in the ULS log following entry:
03/07/2014 12:07:20.69 w3wp.exe (0x0B10) 0x18EC
SharePoint Foundation General 90hv Unexpected
Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before. Stack trace: at Microsoft.SharePoint.Utilities.SPUtility.GetLocalizedString(String
source, String defaultResourceFile, UInt32 language) at Microsoft.SharePoint.SPFieldCollection.get_DisplayNameDict() at Microsoft.SharePoint.SPFieldCollection.GetFieldByDisplayName(String strDisplayName, Boolean
bThrowException) at Microsoft.SharePoint.SPFieldCollection.GetField(String strName, Boolean bThrowException) at Microsoft.SharePoint.SPListItem.GetValue(String strName, Boolean bThrowException)
at Microsoft.SharePoint.SPListItem.get_Item(String fieldName)
at ECM_PDF_Excel.ListClicked.GetECOs(Dictionary`2 searchedEC... e918ecd4-7ed6-44bb-9e4f-d764586a2f79 ...RECONumber)
at ECM_PDF_Excel.PDF.Create() at ECM_PDF_Excel.Layouts.ECM_PDF_Excel.ECMPDFExcel.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 f... e918ecd4-7ed6-44bb-9e4f-d764586a2f79
03/07/2014 12:07:20.69* w3wp.exe (0x0B10) 0x18EC SharePoint Foundation
General 90hv Unexpected ...lags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) e918ecd4-7ed6-44bb-9e4f-d764586a2f79
We check the method
/// <summary>
/// Returns the ECOs in a Dictionary: ECO Number, Suffix
/// </summary>
/// <param name="searchedECRECONumber">Dictionary, with the search ECR/ECO Number</param>
/// <returns>Dictionary ECO Number, Suffix</returns>
public static Dictionary<string, string> GetECOs(Dictionary<String, String> searchedECRECONumber)
SPSite siteContx = SPContext.Current.Site;
SPWeb webContx = siteContx.RootWeb;
Dictionary<string, string> listECOs = new Dictionary<string, string>();
string ecoNumber = string.Empty;
string ecoSuffix = string.Empty;
if (searchedECRECONumber.ContainsKey(ConstantData.listClickedECONumberDictionary))
ecoNumber = searchedECRECONumber[ConstantData.listClickedECONumberDictionary];
else
return listECOs;
// Ich suche die ECO Nummber bei gegebener ECR Nummer
// Ich brauche den Listen Namen der in den Spalten Realtion ECR Number & Realtion ECO Number einen Wert hat
SPList dataList = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists);
if (dataList != null)
SPListItemCollection dataListItems = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists).Items;
foreach (SPItem dataListItem in dataListItems)
Object relationECRColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECRNumber];
Object relationECOColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
if (relationECRColumnName != null && relationECOColumnName != null)
// Ich habe den Listennamen gefunden in dem Spalten Realtion ECR Number & Realtion ECO Number einen Wert haben
string searchedListName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_Title];
string searchedECOSuffixColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
// Get the List from variable listName
listECOs = GetECOsDictionary(searchedListName, searchedECOSuffixColumnName, ecoNumber, relationECOColumnName);
return listECOs;
- What take we wrong?
- How can we avoid this message?
Regards
Jonnyenglisch
Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónesHere the code of GetECOsDictionary:
/// <summary>
/// Fill the dicionary with related ECO Numbers/Suffix
/// </summary>
/// <param name="searchedListName">String: the name of the list</param>
/// <param name="ecoNumber">String: the ECO Number</param>
/// <param name="relationECOColumnName"></param>
/// <returns>Dictionary</returns>
private static Dictionary<string, string> GetECOsDictionary(string searchedListName, string ecoNumber, Object relationECOColumnName)
SPSite siteContx = SPContext.Current.Site;
SPWeb webContx = siteContx.RootWeb;
Dictionary<string, string> listECOs = new Dictionary<string, string>();
SPQuery oQuery = new SPQuery();
oQuery.Query = "<OrderBy>" +
"<FieldRef Name='" + "Title" + "' Ascending='TRUE'></FieldRef>"
+
"</OrderBy>" +
"<Where><BeginsWith>" +
"<FieldRef Name='" + "Title" + "'/>" +
"<Value Type='Text'>" + ecoNumber + "</Value>" +
"</BeginsWith></Where>";
SPListItemCollection searchedListItems = webContx.Lists.TryGetList(searchedListName).GetItems(oQuery);
foreach (SPItem searchedListItem in searchedListItems)
// Wenn die geclickte ECO Nummer gleich der Listen ECO Nummer ist dann setze die gefundene ECO Nummer
string foundECONumber = (String)searchedListItem[relationECOColumnName.ToString()];
string[] splitECONumber = foundECONumber.Split(ConstantData.splitBy_Slash);
if (ecoNumber == splitECONumber[0])
ecoNumber = splitECONumber[0];
if (splitECONumber.Count() == 1)
listECOs.Add(foundECONumber, "0");
if (splitECONumber.Count() > 1)
listECOs.Add(foundECONumber, splitECONumber[1]);
return listECOs;
Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónes -
I went to VI properties and selecting for the front panel to open when called and close when finished, but it still doesn't close when I'm running the program. What else can I do?
These options do exactly what they say - they cause the subVI's front panel to open when the subVI starts running and they close the front panel when the subVI stops. This can be used, for example, for pop-up dialogs.
My guess would be that you are using the abort button to stop the VI. This is a big no-no and causes all the running VIs to stop. What you should do is use the code to end the VI's run. If this doesn't help you, I suggest you post your code (File>>Save with Options>>Development Distribution) and explain what you're trying to do.
To learn more, I suggest you read the LabVIEW user manual. Also, try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide.
Try to take over the world! -
When you are only authorize up to 5 computers for each Id. How do I get around this as I don't want my children having a ID as they are too young?
hugh place wrote:
.... How do I get around this as I don't want my children having a ID as they are too young?
Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
hugh place wrote:
When you are only authorize up to 5 computers for each Id.
More info on this here...
About authorization and deauthorization -
I manually turn off my wifi when leaving home for several reasons:
1. I don't want my wifi to be on and constantly scanning wifi networks while I am away from home due to privacy reasons. Many retail stores and airports are now tracking users based on their smartphone's wifi pings. They can then store your phone's MAC address (the unique identifier of your phone) to determine how often you visit the store and where you go within the store. It's just a matter of time before they match up your phone's MAC address with your credit card/payment info and then to your identity. The only way to subvert this is to turn off your phone's wifi.
2. For security reasons: Wifi access points can track devices that broadcast their wifi signal, even if they don't ever actually connect to the access point's network. These access points can then store your device's details including your phone's MAC address. Once your phone's MAC address is discovered, it can be targeted by a hacker. In addition, there are multiple well known hacker tools that can be used to scan for smartphone wifi signals in order to detect and then hack your iphone. Bottom line: if your wifi is discoverable, then your device is hackable.
3. I believe it would save battery life if the iphone's wifi is not on and constantly scanning for networks all the time.
There are other reasons as well, but the above are my 3 main reasons for asking about this.
The reminders app is location aware - you can set reminders to alert you when you are at a specific location. So, why not provide the option (or an app) to only enable wifi when you are at home - or any other location where you have an authorized or trusted wifi?
As it is right now, the iphone's wifi is broadcasting 24/7 everywhere you go. Not great for privacy & security. When I turn off my wifi, the phone uses my 4G plan for data and GPS for location services... so wifi is not needed at all for data or location services while I am away from home (and no, wifi does not improve location accuracy, that is a fallacy... there is nothing within the wifi protocol that could ever improve location accuracy). But the point is, wifi should have a location aware option. Otherwise, it's just a matter of time before there is a headline story about how not having this feature is a huge security/privacy problem.Understood. However, the point that I'm trying to make is that it's not the WiFi access point's security that's in question, it's having your phone's WiFi in an always-on mode that's in question. It's simple: if your phone's WiFi is on, then it is both discoverable and hackable... even when it's not connected to a WiFi network or access point. Here's an article about a drone in London that was created to hack smartphone WiFi signals (and hackers have been doing what this drone does for years):
http://money.cnn.com/2014/03/20/technology/security/drone-phone/
The point is that it's not secure to have your phone's WiFi in an always-on mode. It would be better for privacy and security if Apple made WiFi location aware so that it is only enabled when you are at a trusted location (e.g. your home or office). Or, at least give us the option of location aware WiFi so that each user can determine the best mode for their phone:
(1) Always-On (current default - not secure and many privacy issues).
(2) Trusted mode (only on at trusted locations).
(3) Off. -
HT4970 How do you set a reminder for only you when you are also sharing?
How do you set a reminder for only you when you are also sharing? I want to share the grocery list with my wife but she don't want to be reminded for me taking my medicine.
Hey Gin-from-SC!
Here is an article that can show you how to set a time and date alert for your reminders when you create them:
iCloud: Create, edit, and delete reminders
http://support.apple.com/kb/PH12088
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
For Boot Camp, if you save a file when you are on the Windows side, when you return to the Mac side, can you see the file or can it only be "seen" on the operating side you create it in?
Why don't you (generic most every post lacks critical details) be clear and say you never used Mac OS etc.
But, I did try to anticipate and give you what you needed.
Excel is one of those rare programs that, if they are extremely large complex spreadsheets still tend to run better under Office for Windows.
A VM won't do for that but it does make it easier to transition. As in: install Windows natively, then use VMware Fusion or Parallels to attach to the partition and OS. That way you can run Windows as Guest OS VM under Mac; and still run Windows natively dual-boot when needed.
The word "see" was not what you wanted, was it? really? you want to open and make changes and keep it on Windows side rather than Save As or copy to Mac
You use Windows and don't know it has NTFS (NT FileSystem)?
http://en.wikipedia.org/wiki/NTFS
http://en.wikipedia.org/wiki/Hierarchical_File_System (HFS) native file system used by Apple
And there is much more UEFI style "bios" and other things I suppose.
Great thing about Google and encyclopedias or dictionary, you can look up what you don't know. -
How do you get rid of white space when you are printing multiple pages to one sheet of paper?
How do you get rid of extra white space when you are printing multiple pages to one sheet of paper? When printing multiple pages to one sheet of paper Acrobat won't let you select the "zoom" for printing.
ThanksTake a look at Quite Imposing.
-
When pulling music from a harddrive and it say music can not be found, is there a way to stop this from happening every time I play music on my computer? It used to find all music when serching for song but now it only finds 1 at a time. I have over 2000 songs so I can't go through this every time.
1) However I do not want to move my itunes Music onto the flash drive, only my Movies, and want to keep my music on my hard drive.
Is this possible?
Yes
2) Do the MacBook Air's not have a separate program other than itunes that can play movies? If so, is there a program I can get to solve this problem? I went onto the App Store to see if there was something I could download, but all the apps were for creating DVD's, not simply playing them.
If you can play the movies in iTunes, you should be able to open the movie files using Quicktime, which should already be on your system. If you have already transferred the files to your flash drive, open the flash drive in Finder, and hold control when you click on the movie file (or right click if you have the enabled) and select Open With Quicktime Player. This should play the movie directly from the flash drive.
If you want to set all .m4v files to open with Quicktime by just double clicking on the file, you can follow the steps here: http://www.tech-recipes.com/rx/2573/os_x_how_to_change_default_application_to_op en_file_type/
3) If 1. & 2. questions are solvable, will it then be safe to delete the movies from my itunes?
You can move the TV shows to your flash drive by dragging them from the iTunes window to your flash drive in Finder or the flash drive icon on the desktop. When you are sure everything is transferred over to your external device, you can delete the movie from iTunes. I recommend playing the videos from the flash drive first before deleting them in iTunes.
To delete the videos from iTunes, you can highlight them and press the delete key on your keyboard. In the next prompt, you would want to move it to the trash so that it is deleted from your internal hard drive.
I hope that helps! -
How do you save your photos in iPhoto and be able to find the photos when you are in different programs. When i try to find them I can only find the iPhotos not the individual photos.
Use the media browser. In every open/attach window in tithe lower left hand corner under media ==> photos ==> iPhoto
LN -
How do you un-attach one picture when you are trying to burn photos on a DAD
How do you un-attach one or two photos when you are trying to burn a group on to a DVD?
I'm not sure exactly what you mean. Does this involve iPhoto somehow? How did they get attached?
-
What is the security code when you are registering in the iTunes Store just after you have put in your credit card number?
It's the 3 or 4 digit code that is on the credit card, it's on the front of some cards, or others it's on the signature strip on the back : http://support.apple.com/kb/HT3541
-
HT5105 How can you do picture in picture when you are working with a Multicam clip?
How can you do picture in picture when you are working with a Multicam clip?
Im doing a drumming music video and with the multi cam clip all the angles are nicely sync'd top the audio.
Problem is if i want to have 3 angles on top of the main shot, im gonna have to re-sync them all to get them to line up manually. If i could use the multi cam clip they will already be aligned
Thanks for trying to help appreciate, hoping someone has some multiclip knowledge and will be able to tell me if yay or nay. -
ItemFocusOut called twice when you are using datagrid
Have you ever encountered itemFocusOut called twice when you
are using datagrid. I use this event to check the text that has
been entered.
Also when I use regex expressions
if((event.itemRenderer as TextInput).text.search(new
RegExp(/.*\..*\./)) != -1){
in the itemFocusOut method and someone enters
234.34.234
I get an error
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at
mx.controls::DataGrid/destroyItemEditor()[C:\autobuild\3.2.0\frameworks\projects\framewor k\src\mx\controls\DataGrid.as:4000]
at
mx.controls::DataGrid/itemEditorItemEditEndHandler()[C:\autobuild\3.2.0\frameworks\projec ts\framework\src\mx\controls\DataGrid.as:4897]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at
mx.core::UIComponent/dispatchEvent()[C:\autobuild\3.2.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9298]
at
mx.controls::DataGrid/endEdit()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\c ontrols\DataGrid.as:4041]
at
mx.controls::DataGrid/mouseDownHandler()[C:\autobuild\3.2.0\frameworks\projects\framework \src\mx\controls\DataGrid.as:4296]
Could some be so kind as shed some light on this
situationI've worked around the error. I had something to do with the
fact that the event was being twice and I worked my handling code
around to avoid the error. However the problem with the event still
remains. I think it is because the data it in the grid is being
refreshed intentially after the code in the itemFocusOut is called
that is cause the second event to fire.
Maybe you are looking for
-
Im looking to remake this picture that is an example when you download motion 5 from the app store. Apple gives you 5 example pictures to kind of show off what the program can do and I want to replicate the 2nd one. I like how the picture is divided
-
How to store / retrieve attachments?
Hi Experts, I am sending message attachments to XI using ABAP Proxy program. The message itself has a number which identifies the attachment. My requirement is to store the attachment in some format in ABAP table. The is required because there is a w
-
Adobe Form (standard) how to set paper weight?
We realized an Adobe Form related to deliveries. The form is printed on a paper with the weight of 160g (which is the double of a normal paper). When the printer settings are put correctly to 160g the print out releases an error message. Apparently t
-
Color adjustment eyedropper bug
Hi there. When using the color adjustments in Aperture I've found that the eyedropper doesn't work as it should. Everytime I try to select a colour using the eyedropper it selects red. This is regardless of which of the 6 color spots I can select f
-
How do I install Canon Eos Utility on Imac retina?
I want to install the canon Eos utility software on the Imac retina...without dvd-player. I can only find updates at the Canon website. Anybody a solution?