TIP: AOL 10.2 dial-up fails on Ext USB Modem

For OS X 10.4.9 + AOL 10.2.1 + Extenral USB Modem,
AOL fails to locate the modem and thus creates a message
"did not detect carrier"
but the issue is locating the modem itself.
For example, NetZero is able to dial and connect just fine
If you insist upon using this %*&^ ISP, you will need dsl/cable interface.

Hello Jeff!
As SBA-Mac posted, the software you should be using is AOL For Mac OS X Version 10.3.7 (Revision 4136.xxx (US)). Is that what you have installed?
Is Net Zero a Dial-Up connection?
ali b

Similar Messages

  • Installing and set-up a dial up connection with an USB modem

    Hello.
    I moved recently to London, and due to some kind of critical lack of financial sustainability, I cannot afford to pay monthly a decent Internet connection. However I have a phone line on my house so I was thinking on using a USB 56k modem to connect via dial-up to Internet (my laptop don't have any integrated modem or PCMCIA port). But I honestly don' t know if that will work (all references googling send me to setting up a 3g modem, which is not the case)
    What should I do? It will work fine? I remember vagely using ppp-on years ago, and editing some files... But I recknon I wont use anymore tty0 or tty1 if it is a USB device (I am using a custom kernel, so after going for work I' ll do a make menuconfig to check driver aviability). And just for curiosity... It will have dial-up tone? If I have to go nostalgic I' d rather experience the full thing.
    Thanks in advance

    http://www.freeukisp.co.uk/about-dial-u … access.htm
    It is the first result googling "free dial up uk", but there is quite a bunch out of there. I only need to look and choose. In Spain at least, I didn't had to pay (just the call rate, wich was free for local calls, so yep, free)
    I use the temrinal, and when in X, fvwm95, so I assume wvdial is for me.
    Thanks for the quick answers
    Last edited by vladimir_1922 (2012-03-19 09:48:33)

  • Internal Modem Not Getting Dial Tone - Failed or Settings? Solution?

    I have just refurbished my old G4 FP iMac for my grown son to use. He has only dial-up service. There is a dial tone on the phone line (verified via telephone handset). After an attempt to connect, I get a "no dial tone" message. I hear no audio of the dial tone or connection sequence, even with volume fully open. Believing the internal modem had failed, I purchased an in-line Apple external USB modem. I obviously did not read the fine print carefully enough, because in troubleshooting I ran across a note saying that I need 10.4 or later to use the external modem. I have 10.3.9 installed, and 10.4 costs about $150 these days. That's a lot of $$ to solve what might be a simple modem or system settings problem. Or maybe I don't really need 10.4?
    Also wondering (if it is a failed internal modem) whether I can purchase and replace the inernal modem itself.
    Any suggestions?

    Fixed problem myself

  • USB Modem dial up connection Mac 2 Mac -  possible?

    I am trying to find a replacement terminal emulation programme to replace ZTerm. Now that I have an Apple USB modem, ZTerm is useless but I can't find a program that will work in a similar way using USB rather than Serial to connect two computers over a dial up connection.
    Anybody?
    Griff

    Danny:
    I did some research and I ran into the FAQ below and it appears that Apple does not provide a USB Modem driver for Windows. We really need to hear from someone who has actually found the driver and is using this modem with Windows.
    *Frequently asked questions: Drivers, Macintosh features within Microsoft Windows, other
    _Which drivers are included on the Mac OS X 10.5 (Leopard) DVD?_
    The Mac OS X 10.5 (Leopard) DVD contains the following Macintosh drivers for Windows:
    Apple Bluetooth
    Apple Keyboard Support
    Apple Remote Driver
    Apple Trackpad
    Atheros 802.11 Wireless
    ATI Graphics
    Boot Camp Control panel for Microsoft Windows
    Boot Camp System Task Notification item (System Tray)
    Broadcom Wireless
    Intel Chipset Software
    Intel Integrated Graphics
    iSight Camera
    Marvel Yukon Ethernet
    nVidia Graphics
    Realtek Audio
    SigmaTel Audio
    Startup Disk Control panel for Microsoft Windows*
    Also found this:
    *Does the Apple USB modem work on Windows machines?
    The Apple USB Modem is not supported on computers running any version of the Microsoft Windows operating system.*
    Axel F.

  • I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

    I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

    Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

  • I Need to create a dial-up for USB Modem please

    Afternoon to all
    I am working in Bagdad as a pilot. Had to buy a Axesstel wireless 3G desktop phone to get internet. Unfortunately this phone has no MAC support and I have to use XP (situated on a second partition). It works fine if I run XP only, but I cannot dial-up through fusion, from apple side. I am convinced that you guys might know how I can create my own dial-up in Leopard. Here is all the info I could get inside windows regarding the XP dial-up;
    PX300 Series CDMA1X Fixed Wireless Phone
    Details
    Device Name Axesstel USB Modem
    Device Type modem
    Server type PPP
    Transports TCP/IP
    Authentication MD5 CHAP
    Compression (none)
    PPP Multilink framing Off
    Server IP address I have this available
    Client IP address I have this available
    Speed of connection 230.4 Kbps
    Properties
    General
    Modem - Axesstel USB Modem (com3)
    Networking
    PPP:Windows 95/98/NT4/2000,Internet
    LCP extensions enabled
    software compression enabled
    This connection uses the following items
    Internet protocol (TCP/IP)
    QoS Packet scheduler
    Maybe you can point me to someone who knows how to create this please
    Thanks a million
    Hein

    You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

  • Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing  works .

    Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing  works .

    Yea i tried in disk utility and its got faiiled and the partitation has deleted and when i tried  to replug the  usb  msg show up by saying  usb not compaitnle. With this mac  and  take me to disk utility  and thanks for replying

  • Apple USB Modem - Dial Up

    Hello hello. I'm new to boot camp as well as mac. Anyway, I'm trying to make my windows run on Dial Up, but when I connect my Apple USB Modem, it detects it, but it doesn't install it, saying I should go online and check (not that I can since dial up is my only source of internet...). I set up my dial up connection, hoping it would work, but when trying to launch it, it shows me the properties saying something involving the modem in COM1 not existing. Any ideas?

    Danny:
    I did some research and I ran into the FAQ below and it appears that Apple does not provide a USB Modem driver for Windows. We really need to hear from someone who has actually found the driver and is using this modem with Windows.
    *Frequently asked questions: Drivers, Macintosh features within Microsoft Windows, other
    _Which drivers are included on the Mac OS X 10.5 (Leopard) DVD?_
    The Mac OS X 10.5 (Leopard) DVD contains the following Macintosh drivers for Windows:
    Apple Bluetooth
    Apple Keyboard Support
    Apple Remote Driver
    Apple Trackpad
    Atheros 802.11 Wireless
    ATI Graphics
    Boot Camp Control panel for Microsoft Windows
    Boot Camp System Task Notification item (System Tray)
    Broadcom Wireless
    Intel Chipset Software
    Intel Integrated Graphics
    iSight Camera
    Marvel Yukon Ethernet
    nVidia Graphics
    Realtek Audio
    SigmaTel Audio
    Startup Disk Control panel for Microsoft Windows*
    Also found this:
    *Does the Apple USB modem work on Windows machines?
    The Apple USB Modem is not supported on computers running any version of the Microsoft Windows operating system.*
    Axel F.

  • Apple USB modem stopped recognising dial tone

    Running Snow Leopard (10.6.8) on a 2007 iMac. Have been using an Apple USB modem for the last several years, and as recently as last week successfully sent out a fax, but suddenly today it does not detect the dial tone (although I can hear it), and hangs up after just 2 seconds. It detects and receives incoming faxes. Is there any way to dig into the preferences to set a longer wait? The system preferences panel for print/fax shows no option for 'wait for dialtone'. Or do I need to reinstall the driver? And if so, where can I download the driver?

    I have exactly the same problem with my Apple external USB modem right down to it showing up in the Profiler. It complains if I unplug it while it's supposedly faxing something. It worked until April 30th, but it hasn't worked since then. However, I don't recall installing any new drivers that would have caused this problem. Even stranger, the modem still works with my old PowerBook G4 which is also running OS X 10.5.7.
    KLM

  • AOL Tests, AOL Session sysadmin login validation failed...

    Hi, I ran the "CRM Foundation" diagnostic checks and got this as a failed test. My sysadmin login works fine when logging in to applications. I checked on Metalink and google for various pastes from this error and can't find anything. Anyone know (1) what this is, (2) how it can be fixed? Thanks!      
         Group Name:      AOLTests      
         Component Name:      AOL Session      
         Class Name:      oracle.apps.jtf.regress.qatool.testcase.authenticateTest      
         Version:      115.9      
         Description:      To authenticate the user.      
         Authentication Test Report
    Current Execution      
    Date:      2009-05-11 18:09:18.0 Time Consumed: 23 milliseconds Status: Failed
    Version Info:      
         oracle.apps.fnd.common.WebAppsContext 115.160
         oracle.apps.fnd.security.SessionManager 115.172
    Inputs:      
         username= SYSADMIN
         password= ******
         Diagnostic Test Executed By= SYSADMIN
    Error:      
         Login validation failed
    Help:      
         Check if SYSADMIN is a valid AOL user

    I believe this is a known issue - see MOS Doc 146438.1 (CRM AOLSessions Authentication Test Diagnostic Error That Login Failed)
    HTH
    Srini

  • MCU Conference Dial out failing

    Hi Everyone
    We have a MCU 5320 running software 4.5(1.45) with TMS 14.4.1. If we schedule a conference in TMS with  hte MCU and a number of our endpoints the conference is created on the MCU but it never dials the endpoints. There's an error "Particaipants not called: awaiting DSP resource". Endpoints can call in to the meeting fine. Has anyone seen this?
    Thanks
    John

    Potentially yes, you might have to do some SIP profile and stuff but I havent seen a config readily available. This *might* get you started where you use MCU in place of the xlite.
    http://www.netcraftsmen.net/blogs/entry/sip-endpoints-in-cisco-communications-manager-call-manager-express-x-lite.html

  • Can't connect thru dial-up on AEBS 802.11g modem

    I have a new MacBook Pro 15" and discovered it has no internal modem. So I bought an Airport Extreme Base Station with modem (802.11g) because I'm going on vacation in a remote area and can only access the internet through dial-up.
    I'm testing the modem at home first and have had no luck. I set up the new station to "connect by modem." I can connect to the new Airport network, but when I try to connect to the internet (via AOL), I don't get a dial tone and of course, don't connect. Network diagnostics said everything checked out except internet connection and server.
    I attached the new base station to my DSL line to see if that worked and here I am--querying you good folks (using WDS). I tried the dial-up on a separate phone line, in case it was something in the DSL wiring that was causing interference, but no luck. Maybe the DSL is throughout every phone plug in the house? Should I be trying the dial-up on a line with no DSL access?
    The Help menus suggest clicking "Modem" in Network options to choose PPP connections, but since there's no internal modem, I don't have a Modem option in my System Preferences.
    Surely, it's not supposed to be this difficult to connect through dial-up?
    All suggestions welcome!

    The modem in the 802.11b/g AEBS is not a DSL modem.
    You will need a DSL modem with an Ethernet output.
    You will connect the output of the DSL modem to the
    AEBS's WAN port.
    Thanks, Duane, but I think my question may be unclear. Here at home, I have a DSL modem and right now I am accessing the internet with it connected to AEB's WAN port.
    However, I will be traveling to a place with only dial-up access and want to take the AEBS with me, so I can use its dial-up modem.
    I've tried to practice at home by connecting the AEBS thru its internal modem port to my phone line, but I can't get it to work or even get a dial tone when AOL begins its connection routine.
    Since my home phone is set up for DSL, I was wondering if that might be causing the problem. I've been disconnecting the DSL modem and plugging the phone line directly into the AEBS modem port. But all attempts to log on to AOL by dial-up have failed.
    Thanks for your help!

  • Dial up usb modem for mavericks?

    Mavericks clearly indicates that it works with dial up but I have been unable to find a modem that does not stop loading pages after a minute or two.  The US Robotics 5637 modem that I was using for 10.6,7 and 8 will log on to the server and start downloading pages but then stops.  It does not drop the connection, the pages just stop loading.  A few pages it will load but something like Facebook is impossible.  I monitor the connections via Little Snitch.  I have a MBP that I was using and a Mini that I just purchased.  After upgrading to 10.9.3 the MBP will not finish loading pages on dial up and the Mini, a clean install, will not either.  I have done all the upgrades recommended bu US Robotics.  US Robotics says the modem works with Mavericks.  Apple support has been no help and declines to tell me what modems might actually work, refers me back to US Robotics and tells me to search the forums. I have followed all their troubleshooting and installation recommendations. Personally, I think it is OS 10.9 and not the modem but what do I know.  Apple is not interested in solving the problem even though I am within the 90 day support window.  I am outside of the US now and have no alternative to dial up internet access.  Can anyone help me?  Right now I am using a 10 years old Dell Latitude to access the internet and have no problems.  After spending close to $2,000 on the Mini and peripherals I'd like to be able to use it.  I'm pretty disgusted with Apple not being helpful on this.  They have offered no alternatives other than to find someone other than them to figure it out.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\) \\(.+\\)/\\\2x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print($2,$3,a[n],$1)|p;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Slow dial up Internet connection with Internal modem

    I just bought a Mac G4 with dual 1.25 gig processors and internal modem for my dial up connection to the Internet. My modem connect speed is 28.8K and max through put on a session is 19K.
    I can use any of 3 Windows/PC's and plug them into the same phone jack and get a solid 50.6K connection with a max through put of 49K. Get basically the same connect speeds with a Windows Laptop
    Any thoughts of what may be the problem with the Mac Internal modem and such a slow connect speed.
    Would buying an external modem with its own processor help me in better connect speeds. Simply at 28.8K the Mac is next to useless on the web.
    My home is all wired with Cat 5e, all jacks are a direct run to the punch down block.
    My goal is to switch my business to all Mac's, but I need to get the connect problem resolved first.
    Thank You
    wm300

    My girlfriend lives in a hill town in a fairly wooded mountain road. She cannot get broadband or DSL either, and the town will, probably never get it. She has satellite, and when it's working well it's great, but in bad weather or cloudy days, the reception is spotty and the satellite provider charges mucho buck for their satellite high speed internet acesss.
    So, she has no choice but to rely on the town's phone lines and basically is stuck with dial-up. Unfortunately, the town's phone lines are very old and are analog lines with no digital support. The fastest she can ever achieve is 28k to 30K speeds. Panifully slow dial-up and even small downloads are an experience in patience and time.
    Maybe call the phone company to check what kind of phone lines your town or surrounding towns are using.
    And if they know what data transfer speeds the lines support
    Also, a thought.
    If this Mac was not purchased new, but as a refurbished or used Mac, it could've had a "new" slower modem installed because the original failed and a identical spec'd modem was not installed.
    I have a single 1.25 Ghz MDD and has a V.92 56K internal modem and I just found out my town's phone lines can support a 125k data transfer or "high speed dial-up". Unfortunately, for some unknown reason, my 56K will only get me to transfer speeds of between 44k and 48. Not sure if this is fault of my modem, accessing my ISP as the dial-up number dials into a tower at least 20 miles away and my ISP's server is over 40 miles away.
    My brother came to visit and his PC laptop could dial-in to his ISP and was able to get transfer speeds of 100k to 120k.
    Again, not sure if this was because of a faster modem or not.
    You would think that if the phone line in my area can support 128k speeds that my modem should be tapping in and operating at 50k spedds or close to the modem's max of 56k.
    This is a stumper becuase I am considering looking for a high speed dial-up provider to replace my current ISP, but if my modem won't clock to any faster than 44k or 48k , I think this would be a waste of my efforts and money.
    If anyone can help me shed some light on my situation, this will help me out, as well.

  • IPOD not recognized/copying to disc failed: Toshiba Laptop USB the issue!

    Just got my IPOD back from servicing (needed new battery). While syncing, every 20 or 30 songs a message appeared: Attempting to copy to the disk failed...
    I kept trying, but eventually Itunes (and Windows) wouldn't even recognize the IPOD (even the IPOD gave up...would flash the "do not disconnect" for a few seconds then immediately default back to default mode (menus, etc.) I could not restore.
    My symptoms seemed to be similar to lots of other problems I saw in the discussion boards. THEN...I somehow linked to this file:
    http://docs.info.apple.com/article.html?artnum=300836
    I had to use my Toshiba laptop's Device Manager to disable the "enhanced" speed USB port. Presto! Immediately the IPOD was recognized and updated FULLY (albeit at very slow speed). (2 hours for 850 tunes). What I don't understand is why this suddenly started to happen? HOPE THIS HELPS SOMEONE !
    Toshiba Satellite A70   Windows XP   Laptop

    Error marking it as unanswered in the first place.

Maybe you are looking for